fabric explorer安装（史上最详细）

最新推荐文章于 2024-04-09 21:17:10 发布

吴晓斌kobe

最新推荐文章于 2024-04-09 21:17:10 发布

阅读量5.1k

点赞数 1

本文链接：https://blog.csdn.net/qq_25216471/article/details/95206926

版权

Hyperledger 专栏收录该内容

23 篇文章 0 订阅

订阅专栏

安装hyperledger fabric explorer

1 下载hyperledger composer 中的prereqs-ubuntu.sh,并且执行

hyperleger composer 是hyperledger全家桶下面的一个子项目，目的是为了能快速搭建fabric环境及部署链代码，prereqs-ubuntu.sh是composer进行的封装，能够快速安装在ubuntu上的一些必备软件。

curl -O https://hyperledger.github.io/composer/latest/prereqs-ubuntu.sh
chmod u+x prereqs-ubuntu.sh
./prereqs-ubuntu.sh

如果出现卡的情况，那就逐个下载也没有关系

2 其他必备软件

sudo apt install jq
sudo apt-get install postgresql postgresql-contrib
sudo groupadd docker     #添加docker用户组
sudo gpasswd -a $USER docker     #将登陆用户加入到docker用户组中
newgrp docker     #更新用户组
docker ps    #测试docker命令是否可以使用sudo正常使用

3 下载explorer文件

cd ~
git clone https://github.com/hyperledger/blockchain-explorer.git

4 下载fabric-sample文件

安装fabric网络（此节可单独作为安装fabric网络demo使用）

git clone -b master https://github.com/hyperledger/fabric-samples.git

cd fabric-samples
vi boot.sh
##将下面附件一的文件copy进去
chmod u+x boot.sh
./boot.sh

5 启动fabric网络

cd ~/fabric-samples/first-network/
./byfn.sh -m generate
./byfn.sh -m up

当看到END就说明fabric安装成功了并且测试通过

6 创建数据库

cd ~/blockchain-explorer/app/persistence/fabric/postgreSQL
chmod -R 775 db/
cd db
./createdb.sh

You are now connected to database "fabricexplorer" as user "postgres".说明成功了

7 修改连接配置文件

cd ~/blockchain-explorer/app/platform/fabric
cd connection-profiles

找到

"organizations": {
                "Org1MSP": {
                        "mspid": "Org1MSP"

这个位置

将"fullpath": true 改为 "fullpath": false

将"path": "/fabric-path/first-network 改为/home/ubuntu/fabric-samples/first-network

通过pwd可以找到相应的位置，三个位置的path全部都替换

打开另外一个terminal

cd /home/ubuntu/fabric-samples/first-network/crypto-config/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp/keystore

ls
复制以_sk结尾的文件名

将path后面以sk结尾的文件9b5e1e91c5e7ca0c0e83799586e729d027e4c1275f079b6c59584f50c7df1faa_sk替换成复制出来的文件名

8 构建 hyperledger explorer

cd ~/blockchain-explorer
npm install
cd ~/blockchain-explorer/app/test
npm install
npm run test
cd ~/blockchain-explorer/client/
npm install
npm test -- -u --coverage
选择a,跑全部（有错误没关系）
选择w，
选择q，退出
npm run build

9 运行hyperledgerexplorer

cd ~/blockchain-explorer/
./start.sh

Please check the log [logs/console/console-2019-07-09.log] for any error

cd logs/console

vi console-*.log

看到Please open web browser to access ：http://localhost:8080/

说明成功了

给服务器放开8080端口

ip:8080就可以看到区块链浏览器了

附件一

#!/bin/bash
#
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

# if version not passed in, default to latest released version
export VERSION=1.2.1
# if ca version not passed in, default to latest released version
export CA_VERSION=$VERSION
# current version of thirdparty images (couchdb, kafka and zookeeper) released
export THIRDPARTY_IMAGE_VERSION=0.4.10
export ARCH=$(echo "$(uname -s|tr '[:upper:]' '[:lower:]'|sed 's/mingw64_nt.*/windows/')-$(uname -m | sed 's/x86_64/amd64/g')")
export MARCH=$(uname -m)

printHelp() {
  echo "Usage: bootstrap.sh [version [ca_version [thirdparty_version]]] [options]"
  echo
  echo "options:"
  echo "-h : this help"
  echo "-d : bypass docker image download"
  echo "-s : bypass fabric-samples repo clone"
  echo "-b : bypass download of platform-specific binaries"
  echo
  echo "e.g. bootstrap.sh 1.2.0 -s"
  echo "would download docker images and binaries for version 1.2.0"
}

dockerFabricPull() {
  local FABRIC_TAG=$1
  for IMAGES in peer orderer ccenv tools; do
      echo "==> FABRIC IMAGE: $IMAGES"
      echo
      docker pull hyperledger/fabric-$IMAGES:$FABRIC_TAG
      docker tag hyperledger/fabric-$IMAGES:$FABRIC_TAG hyperledger/fabric-$IMAGES
  done
}

dockerThirdPartyImagesPull() {
  local THIRDPARTY_TAG=$1
  for IMAGES in couchdb kafka zookeeper; do
      echo "==> THIRDPARTY DOCKER IMAGE: $IMAGES"
      echo
      docker pull hyperledger/fabric-$IMAGES:$THIRDPARTY_TAG
      docker tag hyperledger/fabric-$IMAGES:$THIRDPARTY_TAG hyperledger/fabric-$IMAGES
  done
}

dockerCaPull() {
      local CA_TAG=$1
      echo "==> FABRIC CA IMAGE"
      echo
      docker pull hyperledger/fabric-ca:$CA_TAG
      docker tag hyperledger/fabric-ca:$CA_TAG hyperledger/fabric-ca
}

samplesInstall() {
  # clone (if needed) hyperledger/fabric-samples and checkout corresponding
  # version to the binaries and docker images to be downloaded
  if [ -d first-network ]; then
    # if we are in the fabric-samples repo, checkout corresponding version
    echo "===> Checking out v${VERSION} branch of hyperledger/fabric-samples"
    git checkout v${VERSION}
  elif [ -d fabric-samples ]; then
    # if fabric-samples repo already cloned and in current directory,
    # cd fabric-samples and checkout corresponding version
    echo "===> Checking out v${VERSION} branch of hyperledger/fabric-samples"
    cd fabric-samples && git checkout v${VERSION}
  else
    echo "===> Cloning hyperledger/fabric-samples repo and checkout v${VERSION}"
    git clone -b master https://github.com/hyperledger/fabric-samples.git && cd fabric-samples && git checkout v${VERSION}
  fi
}

# Incrementally downloads the .tar.gz file locally first, only decompressing it
# after the download is complete. This is slower than binaryDownload() but
# allows the download to be resumed.
binaryIncrementalDownload() {
      local BINARY_FILE=$1
      local URL=$2
      curl -f -s -C - ${URL} -o ${BINARY_FILE} || rc=$?
      # Due to limitations in the current Nexus repo:
      # curl returns 33 when there's a resume attempt with no more bytes to download
      # curl returns 2 after finishing a resumed download
      # with -f curl returns 22 on a 404
      if [ "$rc" = 22 ]; then
      # looks like the requested file doesn't actually exist so stop here
      return 22
      fi
      if [ -z "$rc" ] || [ $rc -eq 33 ] || [ $rc -eq 2 ]; then
          # The checksum validates that RC 33 or 2 are not real failures
          echo "==> File downloaded. Verifying the md5sum..."
          localMd5sum=$(md5sum ${BINARY_FILE} | awk '{print $1}')
          remoteMd5sum=$(curl -s ${URL}.md5)
          if [ "$localMd5sum" == "$remoteMd5sum" ]; then
              echo "==> Extracting ${BINARY_FILE}..."
              tar xzf ./${BINARY_FILE} --overwrite
          echo "==> Done."
              rm -f ${BINARY_FILE} ${BINARY_FILE}.md5
          else
              echo "Download failed: the local md5sum is different from the remote md5sum. Please try again."
              rm -f ${BINARY_FILE} ${BINARY_FILE}.md5
              exit 1
          fi
      else
          echo "Failure downloading binaries (curl RC=$rc). Please try again and the download will resume from where it stopped."
          exit 1
      fi
}

# This will attempt to download the .tar.gz all at once, but will trigger the
# binaryIncrementalDownload() function upon a failure, allowing for resume
# if there are network failures.
binaryDownload() {
      local BINARY_FILE=$1
      local URL=$2
      echo "===> Downloading: " ${URL}
      # Check if a previous failure occurred and the file was partially downloaded
      if [ -e ${BINARY_FILE} ]; then
          echo "==> Partial binary file found. Resuming download..."
          binaryIncrementalDownload ${BINARY_FILE} ${URL}
      else
          curl ${URL} | tar xz || rc=$?
          if [ ! -z "$rc" ]; then
              echo "==> There was an error downloading the binary file. Switching to incremental download."
              echo "==> Downloading file..."
              binaryIncrementalDownload ${BINARY_FILE} ${URL}
      else
          echo "==> Done."
          fi
      fi
}

binariesInstall() {
  echo "===> Downloading version ${FABRIC_TAG} platform specific fabric binaries"
  binaryDownload ${BINARY_FILE} https://nexus.hyperledger.org/content/repositories/releases/org/hyperledger/fabric/hyperledger-fabric/${ARCH}-${VERSION}/${BINARY_FILE}
  if [ $? -eq 22 ]; then
     echo
     echo "------> ${FABRIC_TAG} platform specific fabric binary is not available to download <----"
     echo
   fi

  echo "===> Downloading version ${CA_TAG} platform specific fabric-ca-client binary"
  binaryDownload ${CA_BINARY_FILE} https://nexus.hyperledger.org/content/repositories/releases/org/hyperledger/fabric-ca/hyperledger-fabric-ca/${ARCH}-${CA_VERSION}/${CA_BINARY_FILE}
  if [ $? -eq 22 ]; then
     echo
     echo "------> ${CA_TAG} fabric-ca-client binary is not available to download  (Available from 1.1.0-rc1) <----"
     echo
   fi
}

dockerInstall() {
  which docker >& /dev/null
  NODOCKER=$?
  if [ "${NODOCKER}" == 0 ]; then
      echo "===> Pulling fabric Images"
      dockerFabricPull ${FABRIC_TAG}
      echo "===> Pulling fabric ca Image"
      dockerCaPull ${CA_TAG}
      echo "===> Pulling thirdparty docker images"
      dockerThirdPartyImagesPull ${THIRDPARTY_TAG}
      echo
      echo "===> List out hyperledger docker images"
      docker images | grep hyperledger*
  else
    echo "========================================================="
    echo "Docker not installed, bypassing download of Fabric images"
    echo "========================================================="
  fi
}

DOCKER=true
SAMPLES=true
BINARIES=true

# Parse commandline args pull out
# version and/or ca-version strings first
if [ ! -z $1 -a ${1:0:1} != "-" ]; then
  VERSION=$1;shift
  if [ ! -z $1  -a ${1:0:1} != "-" ]; then
    CA_VERSION=$1;shift
    if [ ! -z $1  -a ${1:0:1} != "-" ]; then
      THIRDPARTY_IMAGE_VERSION=$1;shift
    fi
  fi
fi

# prior to 1.2.0 architecture was determined by uname -m
if [[ $VERSION =~ ^1\.[0-1]\.* ]]; then
  export FABRIC_TAG=${MARCH}-${VERSION}
  export CA_TAG=${MARCH}-${CA_VERSION}
  export THIRDPARTY_TAG=${MARCH}-${THIRDPARTY_IMAGE_VERSION}
else
  # starting with 1.2.0, multi-arch images will be default
  : ${CA_TAG:="$CA_VERSION"}
  : ${FABRIC_TAG:="$VERSION"}
  : ${THIRDPARTY_TAG:="$THIRDPARTY_IMAGE_VERSION"}
fi

BINARY_FILE=hyperledger-fabric-${ARCH}-${VERSION}.tar.gz
CA_BINARY_FILE=hyperledger-fabric-ca-${ARCH}-${CA_VERSION}.tar.gz

# then parse opts
while getopts "h?dsb" opt; do
  case "$opt" in
    h|\?)
      printHelp
      exit 0
    ;;
    d)  DOCKER=false
    ;;
    s)  SAMPLES=false
    ;;
    b)  BINARIES=false
    ;;
  esac
done

if [ "$SAMPLES" == "true" ]; then
  echo
  echo "Installing hyperledger/fabric-samples repo"
  echo
  samplesInstall
fi
if [ "$BINARIES" == "true" ]; then
  echo
  echo "Installing Hyperledger Fabric binaries"
  echo
  binariesInstall
fi
if [ "$DOCKER" == "true" ]; then
  echo
  echo "Installing Hyperledger Fabric docker images"
  echo
  dockerInstall
fi

吴晓斌kobe

关注

1
点赞
踩
8

收藏

觉得还不错? 一键收藏
4
评论
fabric explorer安装（史上最详细）

安装hyperledger fabric explorer1 下载hyperledger composer 中的prereqs-ubuntu.sh,并且执行hyperleger composer 是hyperledger全家桶下面的一个子项目，目的是为了能快速搭建fabric环境及部署链代码，prereqs-ubuntu.sh是composer进行的封装，能够快速安装在...
复制链接

扫一扫