文章目录
如何自研一个xxljob
- 注册服务
- 调度服务
- RPC组件(基建，底层严重依赖)
- 日志服务
- 告警服务
系统架构
执行流程
各大调度中心对比
1）服务端启动流程
首先找到配置类 XxlJobAdminConfig
可以发现该类实现 InitializingBean接口，这里直接看 afterPropertiesSet方法即可。
@Override
public void afterPropertiesSet() throws Exception {
//利用静态声明的只会加载一次的特性，初始化一个单例对象。
adminConfig = this;
//初始化xxjob调度器
xxlJobScheduler = new XxlJobScheduler();
xxlJobScheduler.init();
}
初始化xxjob调度器
public void init() throws Exception {
// init i18n
initI18n();
// admin trigger pool start
JobTriggerPoolHelper.toStart(); //初始化触发器线程池
// admin registry monitor run 30秒执行一次,维护注册表信息， 判断在线超时时间90s
JobRegistryHelper.getInstance().start();
// admin fail-monitor run 运行事变监视器,主要失败发送邮箱,重试触发器
JobFailMonitorHelper.getInstance().start();
// admin lose-monitor run ( depend on JobTriggerPoolHelper ) //将丢失主机信息调度日志更改状态
JobCompleteHelper.getInstance().start();
// admin log report start 统计一些失败成功报表
JobLogReportHelper.getInstance().start();
// start-schedule ( depend on JobTriggerPoolHelper ) 执行调度器
JobScheduleHelper.getInstance().start();
logger.info(">>>>>>>>> init xxl-job admin success.");
}
该方法主要做了如下事情：
- init i18n
- 初始化触发器线程池
- 维护注册表信息(30秒执行一次)
- 将丢失主机信息调度日志更改状态
- 统计一些失败成功报表,删除过期日志
- 执行调度器
1）1：初始化触发器线程池
public static void toStart() {
helper.start();
}
public void start(){
//最大200线程，最多处理1000任务
fastTriggerPool = new ThreadPoolExecutor(
10,
XxlJobAdminConfig.getAdminConfig().getTriggerPoolFastMax(),
60L,
TimeUnit.SECONDS,
new LinkedBlockingQueue<Runnable>(1000),
new ThreadFactory() {
@Override
public Thread newThread(Runnable r) {
return new Thread(r, "xxl-job, admin JobTriggerPoolHelper-fastTriggerPool-" + r.hashCode());
}
});
//最大100线程，最多处理2000任务
//一分钟内超时10次，则采用慢触发器执行
slowTriggerPool = new ThreadPoolExecutor(
10,
XxlJobAdminConfig.getAdminConfig().getTriggerPoolSlowMax(),
60L,
TimeUnit.SECONDS,
new LinkedBlockingQueue<Runnable>(2000),
new ThreadFactory() {
@Override
public Thread newThread(Runnable r) {
return new Thread(r, "xxl-job, admin JobTriggerPoolHelper-slowTriggerPool-" + r.hashCode());
}
});
}
注意：这里分别初始化了2个线程池，一个快一个慢，优先选择快，当一分钟以内任务超过10次执行时间超过500ms，则加入慢线程池执行。
1）2：维护注册表信息(30秒执行一次)
这里分别做了三件事
-
初始化注册或者删除线程池，主要负责客户端注册或者销毁到xxl_job_registry表
-
剔除超时注册机器
-
更新xxl_job_group执行器地址列表
public void start(){
// for registry or remove //初始化注册或者删除线程池 registryOrRemoveThreadPool = new ThreadPoolExecutor( 2, 10, 30L, TimeUnit.SECONDS, new LinkedBlockingQueue<Runnable>(2000), new ThreadFactory() { @Override public Thread newThread(Runnable r) { return new Thread(r, "xxl-job, admin JobRegistryMonitorHelper-registryOrRemoveThreadPool-" + r.hashCode()); } }, //注意:这里的拒绝策略就是再次执行...^_^''' new RejectedExecutionHandler() { @Override public void rejectedExecution(Runnable r, ThreadPoolExecutor executor) { r.run(); logger.warn(">>>>>>>>>>> xxl-job, registry or remove too fast, match threadpool rejected handler(run now)."); } }); // for monitor 30秒执行一次,维护注册表信息， 判断在线超时时间90s registryMonitorThread = new Thread(new Runnable() { @Override public void run() { while (!toStop) { try { // auto registry group List<XxlJobGroup> groupList = XxlJobAdminConfig.getAdminConfig().getXxlJobGroupDao().findByAddressType(0); if (groupList!=null && !groupList.isEmpty()) { // remove dead address (admin/executor) 从注册表中删除超时的机器 List<Integer> ids = XxlJobAdminConfig.getAdminConfig().getXxlJobRegistryDao().findDead(RegistryConfig.DEAD_TIMEOUT, new Date()); if (ids!=null && ids.size()>0) { XxlJobAdminConfig.getAdminConfig().getXxlJobRegistryDao().removeDead(ids); } // fresh online address (admin/executor) 获取所有在线机器 HashMap<String, List<String>> appAddressMap = new HashMap<String, List<String>>(); //维护注册表注册key和注册value List<XxlJobRegistry> list = XxlJobAdminConfig.getAdminConfig().getXxlJobRegistryDao().findAll(RegistryConfig.DEAD_TIMEOUT, new Date()); if (list != null) { for (XxlJobRegistry item: list) {//将注册类型为EXECUTOR的XxlJobRegistry集合改装成appname=>设置触发器的ip地址 if (RegistryConfig.RegistType.EXECUTOR.name().equals(item.getRegistryGroup())) { String appname = item.getRegistryKey(); List<String> registryList = appAddressMap.get(appname); if (registryList == null) { registryList = new ArrayList<String>(); } if (!registryList.contains(item.getRegistryValue())) { registryList.add(item.getRegistryValue()); } appAddressMap.put(appname, registryList); } } } // fresh group address 更新xxl_job_group执行器地址列表 for (XxlJobGroup group: groupList) { List<String> registryList = appAddressMap.get(group.getAppname()); String addressListStr = null;//将所有配置触发器的ip地址，使用,拼接 if (registryList!=null && !registryList.isEmpty()) { Collections.sort(registryList); StringBuilder addressListSB = new StringBuilder(); for (String item:registryList) { addressListSB.append(item).append(","); } addressListStr = addressListSB.toString(); addressListStr = addressListStr.substring(0, addressListStr.length()-1); } group.setAddressList(addressListStr);//更新设置了触发器的ip地址 group.setUpdateTime(new Date());//更新修改时间 XxlJobAdminConfig.getAdminConfig().getXxlJobGroupDao().update(group); } } } catch (Exception e) { if (!toStop) { logger.error(">>>>>>>>>>> xxl-job, job registry monitor thread error:{}", e); } } try { TimeUnit.SECONDS.sleep(RegistryConfig.BEAT_TIMEOUT); } catch (InterruptedException e) { if (!toStop) { logger.error(">>>>>>>>>>> xxl-job, job registry monitor thread error:{}", e); } } } logger.info(">>>>>>>>>>> xxl-job, job registry monitor thread stop"); } }); registryMonitorThread.setDaemon(true); registryMonitorThread.setName("xxl-job, admin JobRegistryMonitorHelper-registryMonitorThread"); registryMonitorThread.start(); }
1）3：运行失败监视器,主要失败发送邮箱,重试触发器
这里分别做了三件事
-
失败重试
这里判断失败有2种情况(trigger_code表示调度中心调用执行器状态，handle_code表示执行器执行结束后回调给调度中心的状态，200均标识成功，500标识失败)
第一种：trigger_code!=(0,200) 且 handle_code!=0
第二种：handle_code!=200 -
告警(这里可向spring注入JobAlarm)
public void start(){
monitorThread = new Thread(new Runnable() {@Override public void run() { // monitor while (!toStop) { try { //获取执行失败的日志 调度日志表： 用于保存XXL-JOB任务调度的历史信息，如调度结果、执行结果、调度入参、调度机器和执行器等等； List<Long> failLogIds = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().findFailJobLogIds(1000); if (failLogIds!=null && !failLogIds.isEmpty()) {//1:执行触发器成功,返回值失败.2:触发器失败 for (long failLogId: failLogIds) { // lock log 加锁，乐观修改alarm_status=-1 int lockRet = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateAlarmStatus(failLogId, 0, -1); if (lockRet < 1) { continue; } XxlJobLog log = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().load(failLogId); //获取失败日志具体信息 XxlJobInfo info = XxlJobAdminConfig.getAdminConfig().getXxlJobInfoDao().loadById(log.getJobId()); //加载job信息 // 1、fail retry monitor if (log.getExecutorFailRetryCount() > 0) { //若可重试次数>0,则再次执行触发器 JobTriggerPoolHelper.trigger(log.getJobId(), TriggerTypeEnum.RETRY, (log.getExecutorFailRetryCount()-1), log.getExecutorShardingParam(), log.getExecutorParam(), null); String retryMsg = "<br><br><span style=\"color:#F39C12;\" > >>>>>>>>>>>"+ I18nUtil.getString("jobconf_trigger_type_retry") +"<<<<<<<<<<< </span><br>"; log.setTriggerMsg(log.getTriggerMsg() + retryMsg); XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateTriggerInfo(log); //修改触发器执行信息 } // 2、fail alarm monitor 失败警告监视器 int newAlarmStatus = 0; // 告警状态：0-默认、-1=锁定状态、1-无需告警、2-告警成功、3-告警失败 if (info!=null && info.getAlarmEmail()!=null && info.getAlarmEmail().trim().length()>0) {//若设置报警邮箱，则执行报警 boolean alarmResult = XxlJobAdminConfig.getAdminConfig().getJobAlarmer().alarm(info, log); //发送警报 newAlarmStatus = alarmResult?2:3; //获取警报执行状态 } else {//没设置报警邮箱，则更改状态为不需要告警 newAlarmStatus = 1; } //释放锁 XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateAlarmStatus(failLogId, -1, newAlarmStatus); } } } catch (Exception e) { if (!toStop) { logger.error(">>>>>>>>>>> xxl-job, job fail monitor thread error:{}", e); } } try { TimeUnit.SECONDS.sleep(10); } catch (Exception e) { if (!toStop) { logger.error(e.getMessage(), e); } } } logger.info(">>>>>>>>>>> xxl-job, job fail monitor thread stop"); } }); monitorThread.setDaemon(true); monitorThread.setName("xxl-job, admin JobFailMonitorHelper"); monitorThread.start(); }
在这里可通过实现JobAlarm接口，注入spring容器执行报警。
boolean alarmResult = XxlJobAdminConfig.getAdminConfig().getJobAlarmer().alarm(info, log);
public boolean alarm(XxlJobInfo info, XxlJobLog jobLog) {
boolean result = false;
if (jobAlarmList!=null && jobAlarmList.size()>0) {
result = true; // success means all-success
for (JobAlarm alarm: jobAlarmList) {
boolean resultItem = false;
try {
resultItem = alarm.doAlarm(info, jobLog);
} catch (Exception e) {
logger.error(e.getMessage(), e);
}
if (!resultItem) {
result = false;
}
}
}
return result;
}
这里jobAlarmList集合里面有很多JobAlarm对象， 都是执行初始化方法从spring注入的，也就是说扩展的话，只需要实现JobAlarm接口，注入spring即可。
1）4：将丢失主机信息调度日志更改状态
public void start(){
// for callback 针对回调函数处理的线程池
callbackThreadPool = new ThreadPoolExecutor(
2,
20,
30L,
TimeUnit.SECONDS,
new LinkedBlockingQueue<Runnable>(3000),
new ThreadFactory() {
@Override
public Thread newThread(Runnable r) {
return new Thread(r, "xxl-job, admin JobLosedMonitorHelper-callbackThreadPool-" + r.hashCode());
}
},
new RejectedExecutionHandler() {
@Override
public void rejectedExecution(Runnable r, ThreadPoolExecutor executor) {
r.run();
logger.warn(">>>>>>>>>>> xxl-job, callback too fast, match threadpool rejected handler(run now).");
}
});
// for monitor
monitorThread = new Thread(new Runnable() {
@Override
public void run() {
// wait for JobTriggerPoolHelper-init
try {
TimeUnit.MILLISECONDS.sleep(50);
} catch (InterruptedException e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
// monitor
while (!toStop) {
try {
// 任务结果丢失处理：调度记录停留在 "运行中" 状态超过10min，且对应执行器心跳注册失败不在线，则将本地调度主动标记失败；
Date losedTime = DateUtil.addMinutes(new Date(), -10); //调度日志表： 用于保存XXL-JOB任务调度的历史信息，如调度结果、执行结果、调度入参、调度机器和执行器等等；
List<Long> losedJobIds = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().findLostJobIds(losedTime);
if (losedJobIds!=null && losedJobIds.size()>0) {
for (Long logId: losedJobIds) {
XxlJobLog jobLog = new XxlJobLog();
jobLog.setId(logId);
jobLog.setHandleTime(new Date());
jobLog.setHandleCode(ReturnT.FAIL_CODE);
jobLog.setHandleMsg( I18nUtil.getString("joblog_lost_fail") );
//更改处理状态
XxlJobCompleter.updateHandleInfoAndFinish(jobLog);
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(">>>>>>>>>>> xxl-job, job fail monitor thread error:{}", e);
}
}
try {
TimeUnit.SECONDS.sleep(60);
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, JobLosedMonitorHelper stop");
}
});
monitorThread.setDaemon(true);
monitorThread.setName("xxl-job, admin JobLosedMonitorHelper");
monitorThread.start();
}
更改处理状态
public static int updateHandleInfoAndFinish(XxlJobLog xxlJobLog) {
// finish 若父任务正常结束，则终止子任务,以及设置Childmsg
finishJob(xxlJobLog);
// text最大64kb 避免长度过长 截断超过长度限制字符
if (xxlJobLog.getHandleMsg().length() > 15000) {
xxlJobLog.setHandleMsg( xxlJobLog.getHandleMsg().substring(0, 15000) );
}
// fresh handle 更新超时joblog
return XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateHandleInfo(xxlJobLog);
}
1）5：统计一些失败成功报表,删除过期日志
public void start(){
logrThread = new Thread(new Runnable() {
//每分钟刷新一次
@Override
public void run() {
// last clean log time 记录上次清除日志时间
long lastCleanLogTime = 0;
while (!toStop) {
// 1、log-report refresh: refresh log report in 3 days
try {
for (int i = 0; i < 3; i++) {
// today 分别统计今天,昨天,前天0~24点的数据
Calendar itemDay = Calendar.getInstance();
itemDay.add(Calendar.DAY_OF_MONTH, -i);
itemDay.set(Calendar.HOUR_OF_DAY, 0);
itemDay.set(Calendar.MINUTE, 0);
itemDay.set(Calendar.SECOND, 0);
itemDay.set(Calendar.MILLISECOND, 0);
Date todayFrom = itemDay.getTime();
itemDay.set(Calendar.HOUR_OF_DAY, 23);
itemDay.set(Calendar.MINUTE, 59);
itemDay.set(Calendar.SECOND, 59);
itemDay.set(Calendar.MILLISECOND, 999);
Date todayTo = itemDay.getTime();
// refresh log-report every minute
//设置默认值
XxlJobLogReport xxlJobLogReport = new XxlJobLogReport();
xxlJobLogReport.setTriggerDay(todayFrom);
xxlJobLogReport.setRunningCount(0);
xxlJobLogReport.setSucCount(0);
xxlJobLogReport.setFailCount(0);
//查询失败, 成功，总的调用次数
Map<String, Object> triggerCountMap = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().findLogReport(todayFrom, todayTo);
if (triggerCountMap!=null && triggerCountMap.size()>0) {
int triggerDayCount = triggerCountMap.containsKey("triggerDayCount")?Integer.valueOf(String.valueOf(triggerCountMap.get("triggerDayCount"))):0;
int triggerDayCountRunning = triggerCountMap.containsKey("triggerDayCountRunning")?Integer.valueOf(String.valueOf(triggerCountMap.get("triggerDayCountRunning"))):0;
int triggerDayCountSuc = triggerCountMap.containsKey("triggerDayCountSuc")?Integer.valueOf(String.valueOf(triggerCountMap.get("triggerDayCountSuc"))):0;
int triggerDayCountFail = triggerDayCount - triggerDayCountRunning - triggerDayCountSuc;
xxlJobLogReport.setRunningCount(triggerDayCountRunning);
xxlJobLogReport.setSucCount(triggerDayCountSuc);
xxlJobLogReport.setFailCount(triggerDayCountFail);
}
// do refresh
//刷新调用次数,若找不到则默认都是0
int ret = XxlJobAdminConfig.getAdminConfig().getXxlJobLogReportDao().update(xxlJobLogReport);
if (ret < 1) {
//没数据则保存
XxlJobAdminConfig.getAdminConfig().getXxlJobLogReportDao().save(xxlJobLogReport);
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(">>>>>>>>>>> xxl-job, job log report thread error:{}", e);
}
}
// 2、log-clean: switch open & once each day
//设置了保留日志天数且日志保留了24小时，则进入
if (XxlJobAdminConfig.getAdminConfig().getLogretentiondays()>0
&& System.currentTimeMillis() - lastCleanLogTime > 24*60*60*1000) {
// expire-time
//通过日志保留天数算出清除log时间
Calendar expiredDay = Calendar.getInstance();
expiredDay.add(Calendar.DAY_OF_MONTH, -1 * XxlJobAdminConfig.getAdminConfig().getLogretentiondays());
expiredDay.set(Calendar.HOUR_OF_DAY, 0);
expiredDay.set(Calendar.MINUTE, 0);
expiredDay.set(Calendar.SECOND, 0);
expiredDay.set(Calendar.MILLISECOND, 0);
Date clearBeforeTime = expiredDay.getTime();
// clean expired log
List<Long> logIds = null;
do {
//这里传了3个0表示查询所有,而不是单个任务id
logIds = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().findClearLogIds(0, 0, clearBeforeTime, 0, 1000);
//删除过期数据
if (logIds!=null && logIds.size()>0) {
XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().clearLog(logIds);
}
} while (logIds!=null && logIds.size()>0);
// update clean time
lastCleanLogTime = System.currentTimeMillis();
}
try {
TimeUnit.MINUTES.sleep(1);
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, job log report thread stop");
}
});
logrThread.setDaemon(true);
logrThread.setName("xxl-job, admin JobLogReportHelper");
logrThread.start();
}
1）6：执行调度器
map这里用到了时间轮，
xxl-job 为了避免处理耗时太长，会跨过刻度，多向前校验一个刻度；也就是当指针指到 2s 时，会把 1s 和 2s 位置的任务同时读取出来。
public void start(){
// schedule thread
scheduleThread = new Thread(new Runnable() {
@Override
public void run() {
try { //保证5秒执行一次
TimeUnit.MILLISECONDS.sleep(5000 - System.currentTimeMillis()%1000 );
} catch (InterruptedException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
logger.info(">>>>>>>>> init xxl-job admin scheduler success.");
// pre-read count: treadpool-size * trigger-qps (each trigger cost 50ms, qps = 1000/50 = 20) 每个触发器花费50ms,每个线程单位时间内处理20任务,最多同时处理300*20=6000任务
int preReadCount = (XxlJobAdminConfig.getAdminConfig().getTriggerPoolFastMax() + XxlJobAdminConfig.getAdminConfig().getTriggerPoolSlowMax()) * 20;
while (!scheduleThreadToStop) {
// Scan Job
long start = System.currentTimeMillis();
Connection conn = null;
Boolean connAutoCommit = null;
PreparedStatement preparedStatement = null;
boolean preReadSuc = true;
try {
//设置手动提交
conn = XxlJobAdminConfig.getAdminConfig().getDataSource().getConnection();
connAutoCommit = conn.getAutoCommit();
conn.setAutoCommit(false);
//获取任务调度锁表内数据信息,加写锁
preparedStatement = conn.prepareStatement( "select * from xxl_job_lock where lock_name = 'schedule_lock' for update" );
preparedStatement.execute();
// tx start
// 1、pre read
long nowTime = System.currentTimeMillis(); //获取当前时间后5秒,同时最多负载的分页数
List<XxlJobInfo> scheduleList = XxlJobAdminConfig.getAdminConfig().getXxlJobInfoDao().scheduleJobQuery(nowTime + PRE_READ_MS, preReadCount);
if (scheduleList!=null && scheduleList.size()>0) {
// 2、push time-ring
for (XxlJobInfo jobInfo: scheduleList) {
// time-ring jump
if (nowTime > jobInfo.getTriggerNextTime() + PRE_READ_MS) { //触发器过期时间>5s
// 2.1、trigger-expire > 5s：pass && make next-trigger-time
logger.warn(">>>>>>>>>>> xxl-job, schedule misfire, jobId = " + jobInfo.getId());
// 1、misfire match
// - 调度过期策略：
// - 忽略：调度过期后，忽略过期的任务，从当前时间开始重新计算下次触发时间；
// - 立即执行一次：调度过期后，立即执行一次，并从当前时间开始重新计算下次触发时间；
MisfireStrategyEnum misfireStrategyEnum = MisfireStrategyEnum.match(jobInfo.getMisfireStrategy(), MisfireStrategyEnum.DO_NOTHING);
if (MisfireStrategyEnum.FIRE_ONCE_NOW == misfireStrategyEnum) { //若过期策略为FIRE_ONCE_NOW,则立即执行一次
// FIRE_ONCE_NOW 》 trigger //执行触发器
JobTriggerPoolHelper.trigger(jobInfo.getId(), TriggerTypeEnum.MISFIRE, -1, null, null, null);
logger.debug(">>>>>>>>>>> xxl-job, schedule push trigger : jobId = " + jobInfo.getId() );
}
// 2、fresh next 更新下次执行时间
refreshNextValidTime(jobInfo, new Date());
} else if (nowTime > jobInfo.getTriggerNextTime()) { //触发器过期时间<5s
// 2.2、trigger-expire < 5s：direct-trigger && make next-trigger-time
// 1、trigger //执行触发器
JobTriggerPoolHelper.trigger(jobInfo.getId(), TriggerTypeEnum.CRON, -1, null, null, null);
logger.debug(">>>>>>>>>>> xxl-job, schedule push trigger : jobId = " + jobInfo.getId() );
// 2、fresh next 更新下次执行时间
refreshNextValidTime(jobInfo, new Date());
// next-trigger-time in 5s, pre-read again 下次触发时间在当前时间往后5秒范围内
if (jobInfo.getTriggerStatus()==1 && nowTime + PRE_READ_MS > jobInfo.getTriggerNextTime()) {
// 1、make ring second 获取下次执行秒
int ringSecond = (int)((jobInfo.getTriggerNextTime()/1000)%60);
// 2、push time ring
pushTimeRing(ringSecond, jobInfo.getId());
// 3、fresh next 更新下次执行时间
refreshNextValidTime(jobInfo, new Date(jobInfo.getTriggerNextTime()));
}
} else {
// 2.3、trigger-pre-read：time-ring trigger && make next-trigger-time
//未来五秒以内执行的所有任务添加到ringData
// 1、make ring second
int ringSecond = (int)((jobInfo.getTriggerNextTime()/1000)%60);
// 2、push time ring
pushTimeRing(ringSecond, jobInfo.getId());
// 3、fresh next
refreshNextValidTime(jobInfo, new Date(jobInfo.getTriggerNextTime()));
}
}
// 3、update trigger info 更新执行时间和上次执行时间到数据库
for (XxlJobInfo jobInfo: scheduleList) {
XxlJobAdminConfig.getAdminConfig().getXxlJobInfoDao().scheduleUpdate(jobInfo);
}
} else {
preReadSuc = false;
}
// tx stop
} catch (Exception e) {
if (!scheduleThreadToStop) {
logger.error(">>>>>>>>>>> xxl-job, JobScheduleHelper#scheduleThread error:{}", e);
}
} finally {
// commit
if (conn != null) {
try {
conn.commit();
} catch (SQLException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
try {
conn.setAutoCommit(connAutoCommit);
} catch (SQLException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
try {
conn.close();
} catch (SQLException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
}
// close PreparedStatement
if (null != preparedStatement) {
try {
preparedStatement.close();
} catch (SQLException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
}
}
long cost = System.currentTimeMillis()-start;
// Wait seconds, align second
if (cost < 1000) { // scan-overtime, not wait
try {
// pre-read period: success > scan each second; fail > skip this period;
//若执行成功,每秒执行一次，失败则跳过5秒
TimeUnit.MILLISECONDS.sleep((preReadSuc?1000:PRE_READ_MS) - System.currentTimeMillis()%1000);
} catch (InterruptedException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
}
}
logger.info(">>>>>>>>>>> xxl-job, JobScheduleHelper#scheduleThread stop");
}
});
scheduleThread.setDaemon(true);
scheduleThread.setName("xxl-job, admin JobScheduleHelper#scheduleThread");
scheduleThread.start();
// ring thread
ringThread = new Thread(new Runnable() {
@Override
public void run() {
while (!ringThreadToStop) {
// align second
try {
TimeUnit.MILLISECONDS.sleep(1000 - System.currentTimeMillis() % 1000);
} catch (InterruptedException e) {
if (!ringThreadToStop) {
logger.error(e.getMessage(), e);
}
}
try {
// second data
List<Integer> ringItemData = new ArrayList<>();
int nowSecond = Calendar.getInstance().get(Calendar.SECOND); // 避免处理耗时太长，跨过刻度，向前校验一个刻度；
for (int i = 0; i < 2; i++) {
List<Integer> tmpData = ringData.remove( (nowSecond+60-i)%60 );
if (tmpData != null) {
ringItemData.addAll(tmpData);
}
}
// ring trigger
logger.debug(">>>>>>>>>>> xxl-job, time-ring beat : " + nowSecond + " = " + Arrays.asList(ringItemData) );
if (ringItemData.size() > 0) {
// do trigger
for (int jobId: ringItemData) {
// do trigger //执行触发器
JobTriggerPoolHelper.trigger(jobId, TriggerTypeEnum.CRON, -1, null, null, null);
}
// clear
ringItemData.clear();
}
} catch (Exception e) {
if (!ringThreadToStop) {
logger.error(">>>>>>>>>>> xxl-job, JobScheduleHelper#ringThread error:{}", e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, JobScheduleHelper#ringThread stop");
}
});
ringThread.setDaemon(true);
ringThread.setName("xxl-job, admin JobScheduleHelper#ringThread");
ringThread.start();
}
2）客户端启动流程
构建作业执行器
这里将 XxlJobSpringExecutor 交由容器托管
@Bean
public XxlJobSpringExecutor xxlJobExecutor() {
logger.info(">>>>>>>>>>> xxl-job config init.");
XxlJobSpringExecutor xxlJobSpringExecutor = new XxlJobSpringExecutor();
//xxjob管理地址
xxlJobSpringExecutor.setAdminAddresses(adminAddresses);
//注册应用名称
xxlJobSpringExecutor.setAppname(appname);
//xxl作业执行器注册表地址
xxlJobSpringExecutor.setAddress(address);
xxlJobSpringExecutor.setIp(ip);
xxlJobSpringExecutor.setPort(port);
//注册地址的token
xxlJobSpringExecutor.setAccessToken(accessToken);
//日志路径
xxlJobSpringExecutor.setLogPath(logPath);
//日志保存天数
xxlJobSpringExecutor.setLogRetentionDays(logRetentionDays);
return xxlJobSpringExecutor;
}
老规矩，直接看接口继承体系，可以发现注入了 ApplicationContext 对象。以及实现了 SmartInitializingSingleton 接口，实现该接口的当spring容器初始完成，紧接着执行监听器发送监听后，就会遍历所有的Bean然后初始化所有单例非懒加载的bean，最后在实例化阶段结束时触发回调接口。
// start
@Override
public void afterSingletonsInstantiated() {
// init JobHandler Repository
/*initJobHandlerRepository(applicationContext);*/
// init JobHandler Repository (for method) 初始化调度器资源管理器
initJobHandlerMethodRepository(applicationContext);
// refresh GlueFactory 刷新GlueFactory
GlueFactory.refreshInstance(1);
// super start
try {
super.start();
} catch (Exception e) {
throw new RuntimeException(e);
}
}
该方法主要做了如下事情：
- 初始化调度器资源管理器
2）1：初始化调度器资源管理器
该方法主要做了如下事情：
1.从spring容器获取所有对象，并遍历查找方法上标记XxlJob注解的方法
2. 将xxljob配置的jobname作为key，对象,反射的执行,初始,销毁方法作为value注册jobHandlerRepository 中
private void initJobHandlerMethodRepository(ApplicationContext applicationContext) {
if (applicationContext == null) {
return;
}
// init job handler from method
String[] beanDefinitionNames = applicationContext.getBeanNamesForType(Object.class, false, true);
for (String beanDefinitionName : beanDefinitionNames) {//遍历每个容器对象
Object bean = applicationContext.getBean(beanDefinitionName);
Map<Method, XxlJob> annotatedMethods = null; // referred to ：org.springframework.context.event.EventListenerMethodProcessor.processBean
try { //获取每个注解XxlJob方法
annotatedMethods = MethodIntrospector.selectMethods(bean.getClass(),
new MethodIntrospector.MetadataLookup<XxlJob>() {
@Override
public XxlJob inspect(Method method) {
return AnnotatedElementUtils.findMergedAnnotation(method, XxlJob.class);
}
});
} catch (Throwable ex) {
logger.error("xxl-job method-jobhandler resolve error for bean[" + beanDefinitionName + "].", ex);
}
if (annotatedMethods==null || annotatedMethods.isEmpty()) {
continue;
}
//遍历标记了XxlJob注解的方法
for (Map.Entry<Method, XxlJob> methodXxlJobEntry : annotatedMethods.entrySet()) {
Method executeMethod = methodXxlJobEntry.getKey();
XxlJob xxlJob = methodXxlJobEntry.getValue();
if (xxlJob == null) {
continue;
}
String name = xxlJob.value();//获取配置xxjob的触发器名称
if (name.trim().length() == 0) {
throw new RuntimeException("xxl-job method-jobhandler name invalid, for[" + bean.getClass() + "#" + executeMethod.getName() + "] .");
}
if (loadJobHandler(name) != null) { //工作处理资源库是否有相同命名
throw new RuntimeException("xxl-job jobhandler[" + name + "] naming conflicts.");
}
// execute method
/*if (!(method.getParameterTypes().length == 1 && method.getParameterTypes()[0].isAssignableFrom(String.class))) {
throw new RuntimeException("xxl-job method-jobhandler param-classtype invalid, for[" + bean.getClass() + "#" + method.getName() + "] , " +
"The correct method format like \" public ReturnT<String> execute(String param) \" .");
}
if (!method.getReturnType().isAssignableFrom(ReturnT.class)) {
throw new RuntimeException("xxl-job method-jobhandler return-classtype invalid, for[" + bean.getClass() + "#" + method.getName() + "] , " +
"The correct method format like \" public ReturnT<String> execute(String param) \" .");
}*/
executeMethod.setAccessible(true);//设置可访问,设置后可通过反射调用私有方法
// init and destory
Method initMethod = null;
Method destroyMethod = null;
if (xxlJob.init().trim().length() > 0) {
try { //获取XxlJob标记的方法,配置的init方法
initMethod = bean.getClass().getDeclaredMethod(xxlJob.init());
initMethod.setAccessible(true);
} catch (NoSuchMethodException e) {
throw new RuntimeException("xxl-job method-jobhandler initMethod invalid, for[" + bean.getClass() + "#" + executeMethod.getName() + "] .");
}
}
if (xxlJob.destroy().trim().length() > 0) {
try {//获取XxlJob标记的方法,配置的destroy方法
destroyMethod = bean.getClass().getDeclaredMethod(xxlJob.destroy());
destroyMethod.setAccessible(true);
} catch (NoSuchMethodException e) {
throw new RuntimeException("xxl-job method-jobhandler destroyMethod invalid, for[" + bean.getClass() + "#" + executeMethod.getName() + "] .");
}
}
// registry jobhandler 将xxljob配置的jobname作为key，对象,反射的执行,初始,销毁方法作为value注册jobHandlerRepository中
registJobHandler(name, new MethodJobHandler(bean, executeMethod, initMethod, destroyMethod));
}
}
}
2）2：刷新GlueFactory
public static void refreshInstance(int type){
if (type == 0) {
glueFactory = new GlueFactory();
} else if (type == 1) {
glueFactory = new SpringGlueFactory();
}
}
2）3：核心启动类
该方法主要做了如下事情：
-
初始化日志文件
-
初始化admin链接路径存储集合
-
清除过期日志
-
回调调度中心任务执行状态
-
执行内嵌服务
public void start() throws Exception { // init logpath XxlJobFileAppender.initLogPath(logPath);//初始化日志文件 // init invoker, admin-client initAdminBizList(adminAddresses, accessToken); //初始化admin链接路径存储集合 // init JobLogFileCleanThread 清除过期日志 JobLogFileCleanThread.getInstance().start(logRetentionDays); // init TriggerCallbackThread TriggerCallbackThread.getInstance().start(); // init executor-server 执行内嵌服务 initEmbedServer(address, ip, port, appname, accessToken); }
2）3）1：初始化日志文件
public static void initLogPath(String logPath){
// init
if (logPath!=null && logPath.trim().length()>0) {
logBasePath = logPath;
}
// mk base dir 日志文件不存在则创建
File logPathDir = new File(logBasePath);
if (!logPathDir.exists()) {
logPathDir.mkdirs();
}
logBasePath = logPathDir.getPath();
// mk glue dir 创建glue目录
File glueBaseDir = new File(logPathDir, "gluesource");
if (!glueBaseDir.exists()) {
glueBaseDir.mkdirs();
}
glueSrcPath = glueBaseDir.getPath();
}
2）3）2：初始化admin链接路径存储集合
private void initAdminBizList(String adminAddresses, String accessToken) throws Exception {
if (adminAddresses!=null && adminAddresses.trim().length()>0) {
for (String address: adminAddresses.trim().split(",")) { //多个admin地址以,分隔
if (address!=null && address.trim().length()>0) {
AdminBiz adminBiz = new AdminBizClient(address.trim(), accessToken);
if (adminBizList == null) {
adminBizList = new ArrayList<AdminBiz>();
} //将admin地址以及token添加adminBiz中
adminBizList.add(adminBiz);
}
}
}
}
2）3）3：主要清除过期日志
public void start(final long logRetentionDays){
// limit min value 日志最大保存天数<3天,直接退出
if (logRetentionDays < 3 ) {
return;
}
//一天执行一次
localThread = new Thread(new Runnable() {
@Override
public void run() {
while (!toStop) {
try {
// clean log dir, over logRetentionDays 查询目录下所有子文件(包含目录)
File[] childDirs = new File(XxlJobFileAppender.getLogPath()).listFiles();
if (childDirs!=null && childDirs.length>0) {
// today 获取今天0点时间
Calendar todayCal = Calendar.getInstance();
todayCal.set(Calendar.HOUR_OF_DAY,0);
todayCal.set(Calendar.MINUTE,0);
todayCal.set(Calendar.SECOND,0);
todayCal.set(Calendar.MILLISECOND,0);
Date todayDate = todayCal.getTime();
for (File childFile: childDirs) {
// valid 不是目录跳过
if (!childFile.isDirectory()) {
continue;
}//查询不到'-'则跳过
if (childFile.getName().indexOf("-") == -1) {
continue;
}
// file create date 获取文件创建时间,文件都是以年-月-日命名的
Date logFileCreateDate = null;
try {
SimpleDateFormat simpleDateFormat = new SimpleDateFormat("yyyy-MM-dd");
logFileCreateDate = simpleDateFormat.parse(childFile.getName());
} catch (ParseException e) {
logger.error(e.getMessage(), e);
}
if (logFileCreateDate == null) {
continue;
}
//大于日志最大存活时间则清除
if ((todayDate.getTime()-logFileCreateDate.getTime()) >= logRetentionDays * (24 * 60 * 60 * 1000) ) {
FileUtil.deleteRecursively(childFile);//超过保存天数则清除日志
}
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
try { //睡眠一天处理
TimeUnit.DAYS.sleep(1);
} catch (InterruptedException e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, executor JobLogFileCleanThread thread destory.");
}
});
localThread.setDaemon(true);
localThread.setName("xxl-job, executor JobLogFileCleanThread");
localThread.start();
}
2）3）4： 回调调度中心任务执行状态
具体看主动触发->客户端回调服务端
public void start() {
// valid 是否有配置admin路径
if (XxlJobExecutor.getAdminBizList() == null) {
logger.warn(">>>>>>>>>>> xxl-job, executor callback config fail, adminAddresses is null.");
return;
}
// callback
triggerCallbackThread = new Thread(new Runnable() {
@Override
public void run() {
// normal callback
while(!toStop){
try {
//获取回调参数
HandleCallbackParam callback = getInstance().callBackQueue.take();
if (callback != null) {
// callback list param
List<HandleCallbackParam> callbackParamList = new ArrayList<HandleCallbackParam>();
//移除队列中所有元素到callbackParamList中
int drainToNum = getInstance().callBackQueue.drainTo(callbackParamList);
callbackParamList.add(callback);
// callback, will retry if error 通知admin
if (callbackParamList!=null && callbackParamList.size()>0) {
doCallback(callbackParamList);
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
// last callback
try {
List<HandleCallbackParam> callbackParamList = new ArrayList<HandleCallbackParam>();
int drainToNum = getInstance().callBackQueue.drainTo(callbackParamList);
if (callbackParamList!=null && callbackParamList.size()>0) {
doCallback(callbackParamList);
}
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
logger.info(">>>>>>>>>>> xxl-job, executor callback thread destory.");
}
});
triggerCallbackThread.setDaemon(true);
triggerCallbackThread.setName("xxl-job, executor TriggerCallbackThread");
triggerCallbackThread.start();
// retry
triggerRetryCallbackThread = new Thread(new Runnable() {
@Override
public void run() {
while(!toStop){
try {
retryFailCallbackFile();
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
try {
TimeUnit.SECONDS.sleep(RegistryConfig.BEAT_TIMEOUT);
} catch (InterruptedException e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, executor retry callback thread destory.");
}
});
triggerRetryCallbackThread.setDaemon(true);
triggerRetryCallbackThread.start();
}
2）3）5： 执行内嵌服务
该方法主要做了如下事情：
-
使用netty开放端口，等待服务端调用
-
注册到服务端(心跳30S)
-
向服务端申请剔除服务
private void initEmbedServer(String address, String ip, int port, String appname, String accessToken) throws Exception { // fill ip port 若没设置端口,则寻找可用端口 port = port>0?port: NetUtil.findAvailablePort(9999); ip = (ip!=null&&ip.trim().length()>0)?ip: IpUtil.getIp(); //若没设置IP，则获取本机Ip // generate address 构造地址,若没设置地址,则将ip,port拼接成地址 if (address==null || address.trim().length()==0) { String ip_port_address = IpUtil.getIpPort(ip, port); // registry-address：default use address to registry , otherwise use ip:port if address is null address = "http://{ip_port}/".replace("{ip_port}", ip_port_address); } // accessToken if (accessToken==null || accessToken.trim().length()==0) { logger.warn(">>>>>>>>>>> xxl-job accessToken is empty. To ensure system security, please set the accessToken."); } // start 启动嵌入服务器 ,向服务端注册,以及监听端口,主要服务服务端调用。 embedServer = new EmbedServer(); embedServer.start(address, port, appname, accessToken); }public void start(final String address, final int port, final String appname, final String accessToken) {
executorBiz = new ExecutorBizImpl();
thread = new Thread(new Runnable() {@Override public void run() { // param EventLoopGroup bossGroup = new NioEventLoopGroup(); EventLoopGroup workerGroup = new NioEventLoopGroup(); ThreadPoolExecutor bizThreadPool = new ThreadPoolExecutor( 0, 200, 60L, TimeUnit.SECONDS, new LinkedBlockingQueue<Runnable>(2000), new ThreadFactory() { @Override public Thread newThread(Runnable r) { return new Thread(r, "xxl-rpc, EmbedServer bizThreadPool-" + r.hashCode()); } }, new RejectedExecutionHandler() { @Override public void rejectedExecution(Runnable r, ThreadPoolExecutor executor) { throw new RuntimeException("xxl-job, EmbedServer bizThreadPool is EXHAUSTED!"); } }); try { // start server ServerBootstrap bootstrap = new ServerBootstrap(); bootstrap.group(bossGroup, workerGroup) .channel(NioServerSocketChannel.class) .childHandler(new ChannelInitializer<SocketChannel>() { @Override public void initChannel(SocketChannel channel) throws Exception { channel.pipeline() .addLast(new IdleStateHandler(0, 0, 30 * 3, TimeUnit.SECONDS)) // beat 3N, close if idle .addLast(new HttpServerCodec()) .addLast(new HttpObjectAggregator(5 * 1024 * 1024)) // merge request & reponse to FULL .addLast(new EmbedHttpServerHandler(executorBiz, accessToken, bizThreadPool)); } }) .childOption(ChannelOption.SO_KEEPALIVE, true); // bind 异步绑定port上 ChannelFuture future = bootstrap.bind(port).sync(); logger.info(">>>>>>>>>>> xxl-job remoting server start success, nettype = {}, port = {}", EmbedServer.class, port); // start registry //注册 startRegistry(appname, address); // wait util stop future.channel().closeFuture().sync(); } catch (InterruptedException e) { if (e instanceof InterruptedException) { logger.info(">>>>>>>>>>> xxl-job remoting server stop."); } else { logger.error(">>>>>>>>>>> xxl-job remoting server error.", e); } } finally { // stop try { workerGroup.shutdownGracefully(); bossGroup.shutdownGracefully(); } catch (Exception e) { logger.error(e.getMessage(), e); } } } }); thread.setDaemon(true); // daemon, service jvm, user thread leave >>> daemon leave >>> jvm leave thread.start(); }
向服务端注册,默认30秒执行一次
public void startRegistry(final String appname, final String address) {
// start registry
ExecutorRegistryThread.getInstance().start(appname, address);
}
public void start(final String appname, final String address){
// valid appname不允许为null
if (appname==null || appname.trim().length()==0) {
logger.warn(">>>>>>>>>>> xxl-job, executor registry config fail, appname is null.");
return;
}//服务端地址不能为null
if (XxlJobExecutor.getAdminBizList() == null) {
logger.warn(">>>>>>>>>>> xxl-job, executor registry config fail, adminAddresses is null.");
return;
}
registryThread = new Thread(new Runnable() {
@Override
public void run() {
// registry
while (!toStop) {
try {
RegistryParam registryParam = new RegistryParam(RegistryConfig.RegistType.EXECUTOR.name(), appname, address);
for (AdminBiz adminBiz: XxlJobExecutor.getAdminBizList()) {
try {
ReturnT<String> registryResult = adminBiz.registry(registryParam); //向server注册服务(http请求),注册内容appname,当前服务监听地址
if (registryResult!=null && ReturnT.SUCCESS_CODE == registryResult.getCode()) { //访问成功
registryResult = ReturnT.SUCCESS;
logger.debug(">>>>>>>>>>> xxl-job registry success, registryParam:{}, registryResult:{}", new Object[]{registryParam, registryResult});
break;
} else {
logger.info(">>>>>>>>>>> xxl-job registry fail, registryParam:{}, registryResult:{}", new Object[]{registryParam, registryResult});
}
} catch (Exception e) {
logger.info(">>>>>>>>>>> xxl-job registry error, registryParam:{}", registryParam, e);
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
try {
if (!toStop) { //心跳时间30秒
TimeUnit.SECONDS.sleep(RegistryConfig.BEAT_TIMEOUT);
}
} catch (InterruptedException e) {
if (!toStop) {
logger.warn(">>>>>>>>>>> xxl-job, executor registry thread interrupted, error msg:{}", e.getMessage());
}
}
}
// registry remove 删除注册
try {
RegistryParam registryParam = new RegistryParam(RegistryConfig.RegistType.EXECUTOR.name(), appname, address);
for (AdminBiz adminBiz: XxlJobExecutor.getAdminBizList()) {
try {
ReturnT<String> registryResult = adminBiz.registryRemove(registryParam);
if (registryResult!=null && ReturnT.SUCCESS_CODE == registryResult.getCode()) {
registryResult = ReturnT.SUCCESS;
logger.info(">>>>>>>>>>> xxl-job registry-remove success, registryParam:{}, registryResult:{}", new Object[]{registryParam, registryResult});
break;
} else {
logger.info(">>>>>>>>>>> xxl-job registry-remove fail, registryParam:{}, registryResult:{}", new Object[]{registryParam, registryResult});
}
} catch (Exception e) {
if (!toStop) {
logger.info(">>>>>>>>>>> xxl-job registry-remove error, registryParam:{}", registryParam, e);
}
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
logger.info(">>>>>>>>>>> xxl-job, executor registry thread destory.");
}
});
registryThread.setDaemon(true);
registryThread.setName("xxl-job, executor ExecutorRegistryThread");
registryThread.start();
}
- 服务注册
=======
com.xxl.job.core.thread.ExecutorRegistryThread#start
@Override
public ReturnT<String> registry(RegistryParam registryParam) {
return XxlJobRemotingUtil.postBody(addressUrl + "api/registry", accessToken, timeout, registryParam, String.class);
}
服务端
com.xxl.job.admin.controller.JobApiController#api
public ReturnT<String> registry(RegistryParam registryParam) {
return JobRegistryHelper.getInstance().registry(registryParam);
}
public ReturnT<String> registry(RegistryParam registryParam) {
// valid 校验
if (!StringUtils.hasText(registryParam.getRegistryGroup())
|| !StringUtils.hasText(registryParam.getRegistryKey())
|| !StringUtils.hasText(registryParam.getRegistryValue())) {
return new ReturnT<String>(ReturnT.FAIL_CODE, "Illegal Argument.");
}
// async execute 异步注册
registryOrRemoveThreadPool.execute(new Runnable() {
@Override
public void run() { //更新修改时间
int ret = XxlJobAdminConfig.getAdminConfig().getXxlJobRegistryDao().registryUpdate(registryParam.getRegistryGroup(), registryParam.getRegistryKey(), registryParam.getRegistryValue(), new Date());
if (ret < 1) {//说明暂未数据,才新增
XxlJobAdminConfig.getAdminConfig().getXxlJobRegistryDao().registrySave(registryParam.getRegistryGroup(), registryParam.getRegistryKey(), registryParam.getRegistryValue(), new Date());
// fresh 空实现
freshGroupRegistryInfo(registryParam);
}
}
});
return ReturnT.SUCCESS;
}
客户端接收响应
- 主动触发
=======
4）1：服务端
触发地址：com.xxl.job.admin.controller.JobInfoController#triggerJob
@RequestMapping("/trigger")
@ResponseBody
//@PermissionLimit(limit = false)
public ReturnT<String> triggerJob(int id, String executorParam, String addressList) {
// force cover job param 设置默认值
if (executorParam == null) {
executorParam = "";
}
//触发器类型，手动 ，重试次数，'执行器任务分片参数，格式如 1/2'，任务参数，机器地址
JobTriggerPoolHelper.trigger(id, TriggerTypeEnum.MANUAL, -1, null, executorParam, addressList);
return ReturnT.SUCCESS;
}
执行触发器
public static void trigger(int jobId, TriggerTypeEnum triggerType, int failRetryCount, String executorShardingParam, String executorParam, String addressList) {
helper.addTrigger(jobId, triggerType, failRetryCount, executorShardingParam, executorParam, addressList);
}
public void addTrigger(final int jobId,
final TriggerTypeEnum triggerType,
final int failRetryCount,
final String executorShardingParam,
final String executorParam,
final String addressList) {
// choose thread pool 获取线程池
ThreadPoolExecutor triggerPool_ = fastTriggerPool;
//获取超时次数
AtomicInteger jobTimeoutCount = jobTimeoutCountMap.get(jobId);
//一分钟内超时10次，则采用慢触发器执行
if (jobTimeoutCount!=null && jobTimeoutCount.get() > 10) { // job-timeout 10 times in 1 min
triggerPool_ = slowTriggerPool;
}
// trigger
triggerPool_.execute(new Runnable() {
@Override
public void run() {
long start = System.currentTimeMillis();
try {
// do trigger //执行触发器
XxlJobTrigger.trigger(jobId, triggerType, failRetryCount, executorShardingParam, executorParam, addressList);
} catch (Exception e) {
logger.error(e.getMessage(), e);
} finally {
// check timeout-count-map 更新成为下一分钟
long minTim_now = System.currentTimeMillis()/60000;
if (minTim != minTim_now) {
minTim = minTim_now; //当达到下一分钟则清除超时任务
jobTimeoutCountMap.clear();
}
// incr timeout-count-map
long cost = System.currentTimeMillis()-start;
if (cost > 500) { // ob-timeout threshold 500ms
//执行时间超过500ms,则记录执行次数
AtomicInteger timeoutCount = jobTimeoutCountMap.putIfAbsent(jobId, new AtomicInteger(1));
if (timeoutCount != null) {
timeoutCount.incrementAndGet();
}
}
}
}
});
}
注意当触发器在一分钟内超时10次，则采用慢触发器执行
public static void trigger(int jobId,
TriggerTypeEnum triggerType,
int failRetryCount,
String executorShardingParam,
String executorParam,
String addressList) {
// load data 从数据库获取任务详情信息
XxlJobInfo jobInfo = XxlJobAdminConfig.getAdminConfig().getXxlJobInfoDao().loadById(jobId);
if (jobInfo == null) {
logger.warn(">>>>>>>>>>>> trigger fail, jobId invalid，jobId={}", jobId);
return;
}
if (executorParam != null) {
//设置任务参数
jobInfo.setExecutorParam(executorParam);
}
//获取失败重试次数
int finalFailRetryCount = failRetryCount>=0?failRetryCount:jobInfo.getExecutorFailRetryCount();
//获取job分组信息
XxlJobGroup group = XxlJobAdminConfig.getAdminConfig().getXxlJobGroupDao().load(jobInfo.getJobGroup());
// cover addressList 设置地址集合
if (addressList!=null && addressList.trim().length()>0) {
group.setAddressType(1);
group.setAddressList(addressList.trim());
}
// sharding param 拆分executorParam任务参数,填入shardingParam数组
int[] shardingParam = null;
if (executorShardingParam!=null){
String[] shardingArr = executorParam.split("/");
if (shardingArr.length==2 && isNumeric(shardingArr[0]) && isNumeric(shardingArr[1])) {
shardingParam = new int[2];
shardingParam[0] = Integer.valueOf(shardingArr[0]);
shardingParam[1] = Integer.valueOf(shardingArr[1]);
}
} //如果路由策略是分片广播模式，同时注册地址不为空
if (ExecutorRouteStrategyEnum.SHARDING_BROADCAST==ExecutorRouteStrategyEnum.match(jobInfo.getExecutorRouteStrategy(), null)
&& group.getRegistryList()!=null && !group.getRegistryList().isEmpty()
&& shardingParam==null) {
for (int i = 0; i < group.getRegistryList().size(); i++) { //遍历执行每个注册地址，集群广播
processTrigger(group, jobInfo, finalFailRetryCount, triggerType, i, group.getRegistryList().size());
}
} else {
if (shardingParam == null) { //当shardingParam为空，设置默认值,分别标识
shardingParam = new int[]{0, 1};
} //执行触发器
processTrigger(group, jobInfo, finalFailRetryCount, triggerType, shardingParam[0], shardingParam[1]);
}
}
这里会依据路由策略模式,选择对应的路由方式处理,采用了策略模式.
private static void processTrigger(XxlJobGroup group, XxlJobInfo jobInfo, int finalFailRetryCount, TriggerTypeEnum triggerType, int index, int total){
// param 获取阻塞处理策略
ExecutorBlockStrategyEnum blockStrategy = ExecutorBlockStrategyEnum.match(jobInfo.getExecutorBlockStrategy(), ExecutorBlockStrategyEnum.SERIAL_EXECUTION); // block strategy
// route strategy 获取路由策略,默认first
ExecutorRouteStrategyEnum executorRouteStrategyEnum = ExecutorRouteStrategyEnum.match(jobInfo.getExecutorRouteStrategy(), null);
String shardingParam = (ExecutorRouteStrategyEnum.SHARDING_BROADCAST==executorRouteStrategyEnum)?String.valueOf(index).concat("/").concat(String.valueOf(total)):null;
// 1、save log-id 保存执行日志
XxlJobLog jobLog = new XxlJobLog();
jobLog.setJobGroup(jobInfo.getJobGroup());
jobLog.setJobId(jobInfo.getId());
jobLog.setTriggerTime(new Date());
XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().save(jobLog);
logger.debug(">>>>>>>>>>> xxl-job trigger start, jobId:{}", jobLog.getId());
// 2、init trigger-param
TriggerParam triggerParam = new TriggerParam();
triggerParam.setJobId(jobInfo.getId());
triggerParam.setExecutorHandler(jobInfo.getExecutorHandler());
triggerParam.setExecutorParams(jobInfo.getExecutorParam());
triggerParam.setExecutorBlockStrategy(jobInfo.getExecutorBlockStrategy());
triggerParam.setExecutorTimeout(jobInfo.getExecutorTimeout());
triggerParam.setLogId(jobLog.getId());
triggerParam.setLogDateTime(jobLog.getTriggerTime().getTime());
triggerParam.setGlueType(jobInfo.getGlueType());
triggerParam.setGlueSource(jobInfo.getGlueSource());
triggerParam.setGlueUpdatetime(jobInfo.getGlueUpdatetime().getTime());
triggerParam.setBroadcastIndex(index);
triggerParam.setBroadcastTotal(total);
// 3、init address 获取触发器执行地址
String address = null;
ReturnT<String> routeAddressResult = null;
if (group.getRegistryList()!=null && !group.getRegistryList().isEmpty()) { //如果是集群广播模式
if (ExecutorRouteStrategyEnum.SHARDING_BROADCAST == executorRouteStrategyEnum) {
if (index < group.getRegistryList().size()) { //查询匹配地址执行
address = group.getRegistryList().get(index);
} else { //超过size,则默认执行第一个.
address = group.getRegistryList().get(0);
}
} else {
//根据设置的路由策略,执行路由器,获取返回结果 ,这里用到了策略模式
routeAddressResult = executorRouteStrategyEnum.getRouter().route(triggerParam, group.getRegistryList());
if (routeAddressResult.getCode() == ReturnT.SUCCESS_CODE) {
address = routeAddressResult.getContent();
}
}
} else { //获取不到注册地址，返回失败值
routeAddressResult = new ReturnT<String>(ReturnT.FAIL_CODE, I18nUtil.getString("jobconf_trigger_address_empty"));
}
// 4、trigger remote executor
ReturnT<String> triggerResult = null;
if (address != null) { //这里真正的执行触发器
triggerResult = runExecutor(triggerParam, address);
} else {//获取不到执行地址直接返回
triggerResult = new ReturnT<String>(ReturnT.FAIL_CODE, null);
}
// 5、collection trigger info
StringBuffer triggerMsgSb = new StringBuffer();
triggerMsgSb.append(I18nUtil.getString("jobconf_trigger_type")).append("：").append(triggerType.getTitle());
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobconf_trigger_admin_adress")).append("：").append(IpUtil.getIp());
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobconf_trigger_exe_regtype")).append("：")
.append( (group.getAddressType() == 0)?I18nUtil.getString("jobgroup_field_addressType_0"):I18nUtil.getString("jobgroup_field_addressType_1") );
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobconf_trigger_exe_regaddress")).append("：").append(group.getRegistryList());
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobinfo_field_executorRouteStrategy")).append("：").append(executorRouteStrategyEnum.getTitle());
if (shardingParam != null) {
triggerMsgSb.append("("+shardingParam+")");
}
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobinfo_field_executorBlockStrategy")).append("：").append(blockStrategy.getTitle());
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobinfo_field_timeout")).append("：").append(jobInfo.getExecutorTimeout());
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobinfo_field_executorFailRetryCount")).append("：").append(finalFailRetryCount);
triggerMsgSb.append("<br><br><span style=\"color:#00c0ef;\" > >>>>>>>>>>>"+ I18nUtil.getString("jobconf_trigger_run") +"<<<<<<<<<<< </span><br>")
.append((routeAddressResult!=null&&routeAddressResult.getMsg()!=null)?routeAddressResult.getMsg()+"<br><br>":"").append(triggerResult.getMsg()!=null?triggerResult.getMsg():"");
// 6、save log trigger-info 更改执行日志状态
jobLog.setExecutorAddress(address);
jobLog.setExecutorHandler(jobInfo.getExecutorHandler());
jobLog.setExecutorParam(jobInfo.getExecutorParam());
jobLog.setExecutorShardingParam(shardingParam);
jobLog.setExecutorFailRetryCount(finalFailRetryCount);
//jobLog.setTriggerTime();
jobLog.setTriggerCode(triggerResult.getCode());//设置执行触发器返回值
jobLog.setTriggerMsg(triggerMsgSb.toString());//设置返回结果信息
XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateTriggerInfo(jobLog);
logger.debug(">>>>>>>>>>> xxl-job trigger end, jobId:{}", jobLog.getId());
}
路由策略
FIRST(I18nUtil.getString(“jobconf_route_first”), new ExecutorRouteFirst()), //（第一个）固定选择第一个机器
LAST(I18nUtil.getString(“jobconf_route_last”), new ExecutorRouteLast()), //（最后一个）固定选择最后一个机器
ROUND(I18nUtil.getString(“jobconf_route_round”), new ExecutorRouteRound()), //（轮询）轮询
RANDOM(I18nUtil.getString(“jobconf_route_random”), new ExecutorRouteRandom()), //（随机）随机选择在线的机器；
CONSISTENT_HASH(I18nUtil.getString(“jobconf_route_consistenthash”), new ExecutorRouteConsistentHash()), //（一致性HASH）每个任务按照Hash算法固定选择某一台机器，且所有任务均匀散列在不同机器上。
LEAST_FREQUENTLY_USED(I18nUtil.getString(“jobconf_route_lfu”), new ExecutorRouteLFU()), //（最不经常使用）使用频率最低的机器优先被选举；
LEAST_RECENTLY_USED(I18nUtil.getString(“jobconf_route_lru”), new ExecutorRouteLRU()), //（最近最久未使用）最久未使用的机器优先被选举；
FAILOVER(I18nUtil.getString(“jobconf_route_failover”), new ExecutorRouteFailover()), //（故障转移）按照顺序依次进行心跳检测，第一个心跳检测成功的机器选定为目标执行器并发起调度；
BUSYOVER(I18nUtil.getString(“jobconf_route_busyover”), new ExecutorRouteBusyover()), //（忙碌转移）按照顺序依次进行空闲检测，第一个空闲检测成功的机器选定为目标执行器并发起调度；
SHARDING_BROADCAST(I18nUtil.getString(“jobconf_route_shard”), null); //(分片广播)广播触发对应集群中所有机器执行一次任务，同时系统自动传递分片参数；可根据分片参数开发分片任务；
这里默认固定选择第一个机器
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList){
return new ReturnT<String>(addressList.get(0));
}
执行触发器
拼接http+token地址
public static ReturnT<String> runExecutor(TriggerParam triggerParam, String address){
ReturnT<String> runResult = null;
try {
ExecutorBiz executorBiz = XxlJobScheduler.getExecutorBiz(address);//获取业务执行器地址,就执行器地址后面拼接token
runResult = executorBiz.run(triggerParam);
} catch (Exception e) {
logger.error(">>>>>>>>>>> xxl-job trigger error, please check if the executor[{}] is running.", address, e);
runResult = new ReturnT<String>(ReturnT.FAIL_CODE, ThrowableUtil.toString(e));
}
//返回结果设置msg
StringBuffer runResultSB = new StringBuffer(I18nUtil.getString("jobconf_trigger_run") + "：");
runResultSB.append("<br>address：").append(address);
runResultSB.append("<br>code：").append(runResult.getCode());
runResultSB.append("<br>msg：").append(runResult.getMsg());
runResult.setMsg(runResultSB.toString());
return runResult;
}
访问执行
@Override
public ReturnT<String> run(TriggerParam triggerParam) {
return XxlJobRemotingUtil.postBody(addressUrl + "run", accessToken, timeout, triggerParam, String.class);
}
4）2：客户端
@Override
protected void channelRead0(final ChannelHandlerContext ctx, FullHttpRequest msg) throws Exception {
// request parse
//final byte[] requestBytes = ByteBufUtil.getBytes(msg.content()); // byteBuf.toString(io.netty.util.CharsetUtil.UTF_8);
String requestData = msg.content().toString(CharsetUtil.UTF_8);//解析请求数据
String uri = msg.uri();//获取uri,后面通过uri来处理不同的请求
HttpMethod httpMethod = msg.method();//获取请求方式,Post/Get
boolean keepAlive = HttpUtil.isKeepAlive(msg);//保持长连接
String accessTokenReq = msg.headers().get(XxlJobRemotingUtil.XXL_JOB_ACCESS_TOKEN);
// invoke
bizThreadPool.execute(new Runnable() {
@Override
public void run() {
// do invoke
Object responseObj = process(httpMethod, uri, requestData, accessTokenReq);
// to json 响应结果转json
String responseJson = GsonTool.toJson(responseObj);
// write response
writeResponse(ctx, keepAlive, responseJson);
}
});
}
执行触发器
private Object process(HttpMethod httpMethod, String uri, String requestData, String accessTokenReq) {
// valid 不是POST直接返回异常
if (HttpMethod.POST != httpMethod) {
return new ReturnT<String>(ReturnT.FAIL_CODE, "invalid request, HttpMethod not support.");
}
if (uri==null || uri.trim().length()==0) { //校验uri
return new ReturnT<String>(ReturnT.FAIL_CODE, "invalid request, uri-mapping empty.");
}//校验token是否正确
if (accessToken!=null
&& accessToken.trim().length()>0
&& !accessToken.equals(accessTokenReq)) {
return new ReturnT<String>(ReturnT.FAIL_CODE, "The access token is wrong.");
}
// services mapping
try {
if ("/beat".equals(uri)) {
return executorBiz.beat();
} else if ("/idleBeat".equals(uri)) {
IdleBeatParam idleBeatParam = GsonTool.fromJson(requestData, IdleBeatParam.class);
return executorBiz.idleBeat(idleBeatParam);
} else if ("/run".equals(uri)) { //执行触发器
TriggerParam triggerParam = GsonTool.fromJson(requestData, TriggerParam.class);//请求参数解析成TriggerParam
return executorBiz.run(triggerParam);
} else if ("/kill".equals(uri)) {
KillParam killParam = GsonTool.fromJson(requestData, KillParam.class);
return executorBiz.kill(killParam);
} else if ("/log".equals(uri)) {
LogParam logParam = GsonTool.fromJson(requestData, LogParam.class);
return executorBiz.log(logParam);
} else {
return new ReturnT<String>(ReturnT.FAIL_CODE, "invalid request, uri-mapping("+ uri +") not found.");
}
} catch (Exception e) {
logger.error(e.getMessage(), e);
return new ReturnT<String>(ReturnT.FAIL_CODE, "request error:" + ThrowableUtil.toString(e));
}
}
-
绑定作业到具体线程，启动线程
-
任务丢入线程处理
@Override
public ReturnT run(TriggerParam triggerParam) {
// load old：jobHandler + jobThread
//获取job绑定线程
JobThread jobThread = XxlJobExecutor.loadJobThread(triggerParam.getJobId());
//获取作业处理器
IJobHandler jobHandler = jobThread!=null?jobThread.getHandler():null;
String removeOldReason = null;// valid：jobHandler + jobThread //获取任务运行模式 GlueTypeEnum glueTypeEnum = GlueTypeEnum.match(triggerParam.getGlueType()); //任务以JobHandler方式维护在执行器端；需要结合 "JobHandler" 属性匹配执行器中任务； if (GlueTypeEnum.BEAN == glueTypeEnum) { // new jobhandler 获取job处理器,也就是方法声明 IJobHandler newJobHandler = XxlJobExecutor.loadJobHandler(triggerParam.getExecutorHandler()); // valid old jobThread 如果job处理器不一样,则kill旧处理器绑定的线程 if (jobThread!=null && jobHandler != newJobHandler) { // change handler, need kill old thread removeOldReason = "change jobhandler or glue type, and terminate the old job thread."; jobThread = null; jobHandler = null; } // valid handler //执行到这儿,要么新旧处理器不一致,要么没有绑定过任何线程 if (jobHandler == null) { jobHandler = newJobHandler; //没找到处理器,直接返回异常 if (jobHandler == null) { return new ReturnT<String>(ReturnT.FAIL_CODE, "job handler [" + triggerParam.getExecutorHandler() + "] not found."); } } } else if (GlueTypeEnum.GLUE_GROOVY == glueTypeEnum) { // valid old jobThread if (jobThread != null && !(jobThread.getHandler() instanceof GlueJobHandler && ((GlueJobHandler) jobThread.getHandler()).getGlueUpdatetime()==triggerParam.getGlueUpdatetime() )) { // change handler or gluesource updated, need kill old thread removeOldReason = "change job source or glue type, and terminate the old job thread."; jobThread = null; jobHandler = null; } // valid handler if (jobHandler == null) { try { IJobHandler originJobHandler = GlueFactory.getInstance().loadNewInstance(triggerParam.getGlueSource()); jobHandler = new GlueJobHandler(originJobHandler, triggerParam.getGlueUpdatetime()); } catch (Exception e) { logger.error(e.getMessage(), e); return new ReturnT<String>(ReturnT.FAIL_CODE, e.getMessage()); } } } else if (glueTypeEnum!=null && glueTypeEnum.isScript()) { // valid old jobThread if (jobThread != null && !(jobThread.getHandler() instanceof ScriptJobHandler && ((ScriptJobHandler) jobThread.getHandler()).getGlueUpdatetime()==triggerParam.getGlueUpdatetime() )) { // change script or gluesource updated, need kill old thread removeOldReason = "change job source or glue type, and terminate the old job thread."; jobThread = null; jobHandler = null; } // valid handler if (jobHandler == null) { jobHandler = new ScriptJobHandler(triggerParam.getJobId(), triggerParam.getGlueUpdatetime(), triggerParam.getGlueSource(), GlueTypeEnum.match(triggerParam.getGlueType())); } } else { return new ReturnT<String>(ReturnT.FAIL_CODE, "glueType[" + triggerParam.getGlueType() + "] is not valid."); } // executor block strategy //获取任务阻塞策略 if (jobThread != null) { ExecutorBlockStrategyEnum blockStrategy = ExecutorBlockStrategyEnum.match(triggerParam.getExecutorBlockStrategy(), null); if (ExecutorBlockStrategyEnum.DISCARD_LATER == blockStrategy) { // discard when running if (jobThread.isRunningOrHasQueue()) { return new ReturnT<String>(ReturnT.FAIL_CODE, "block strategy effect："+ExecutorBlockStrategyEnum.DISCARD_LATER.getTitle()); } } else if (ExecutorBlockStrategyEnum.COVER_EARLY == blockStrategy) { // kill running jobThread if (jobThread.isRunningOrHasQueue()) { removeOldReason = "block strategy effect：" + ExecutorBlockStrategyEnum.COVER_EARLY.getTitle(); jobThread = null; } } else { // just queue trigger } } // replace thread (new or exists invalid) //作业没绑定过线程,则绑定作业到具体线程 if (jobThread == null) { jobThread = XxlJobExecutor.registJobThread(triggerParam.getJobId(), jobHandler, removeOldReason); } // push data to queue 任务丢入线程处理 ReturnT<String> pushResult = jobThread.pushTriggerQueue(triggerParam); return pushResult; }
绑定作业到具体线程，启动线程
public static JobThread registJobThread(int jobId, IJobHandler handler, String removeOldReason){
JobThread newJobThread = new JobThread(jobId, handler);//启动新线程处理工作任务
newJobThread.start();
logger.info(">>>>>>>>>>> xxl-job regist JobThread success, jobId:{}, handler:{}", new Object[]{jobId, handler});
//存储jobId与绑定工作的线程
JobThread oldJobThread = jobThreadRepository.put(jobId, newJobThread); // putIfAbsent | oh my god, map's put method return the old value!!!
if (oldJobThread != null) {//中断并删除旧线程
oldJobThread.toStop(removeOldReason);
oldJobThread.interrupt();
}
return newJobThread;
}
任务丢入线程处理
public ReturnT<String> pushTriggerQueue(TriggerParam triggerParam) {
// avoid repeat 若包含，则说明重复执行
if (triggerLogIdSet.contains(triggerParam.getLogId())) {
logger.info(">>>>>>>>>>> repeate trigger job, logId:{}", triggerParam.getLogId());
return new ReturnT<String>(ReturnT.FAIL_CODE, "repeate trigger job, logId:" + triggerParam.getLogId());
}
triggerLogIdSet.add(triggerParam.getLogId());
triggerQueue.add(triggerParam);
return ReturnT.SUCCESS;
}
具体执行触发器逻辑
@Override
public void run() {
// init
try {
handler.init();//执行初始化任务
} catch (Throwable e) {
logger.error(e.getMessage(), e);
}
// execute
while(!toStop){
running = false;
idleTimes++;//统计空闲执行次数
TriggerParam triggerParam = null;
try {
// to check toStop signal, we need cycle, so wo cannot use queue.take(), instand of poll(timeout)
triggerParam = triggerQueue.poll(3L, TimeUnit.SECONDS); //获取触发器任务
if (triggerParam!=null) {
running = true;
idleTimes = 0;//空闲次数重置
triggerLogIdSet.remove(triggerParam.getLogId()); //删除logId主要用来判断是否重复执行
// log filename, like "logPath/yyyy-MM-dd/9999.log" 写入log文件
String logFileName = XxlJobFileAppender.makeLogFileName(new Date(triggerParam.getLogDateTime()), triggerParam.getLogId());
XxlJobContext xxlJobContext = new XxlJobContext(
triggerParam.getJobId(),
triggerParam.getExecutorParams(),
logFileName,
triggerParam.getBroadcastIndex(),
triggerParam.getBroadcastTotal());
// init job context
XxlJobContext.setXxlJobContext(xxlJobContext);
// execute
XxlJobHelper.log("<br>----------- xxl-job job execute start -----------<br>----------- Param:" + xxlJobContext.getJobParam());
//设置了超时就异步线程处理
if (triggerParam.getExecutorTimeout() > 0) {
// limit timeout
Thread futureThread = null;
try {
FutureTask<Boolean> futureTask = new FutureTask<Boolean>(new Callable<Boolean>() {
@Override
public Boolean call() throws Exception {
// init job context
XxlJobContext.setXxlJobContext(xxlJobContext);
handler.execute();
return true;
}
});
futureThread = new Thread(futureTask);
futureThread.start();
//异步线程处理并获取返回值
Boolean tempResult = futureTask.get(triggerParam.getExecutorTimeout(), TimeUnit.SECONDS);
} catch (TimeoutException e) {
XxlJobHelper.log("<br>----------- xxl-job job execute timeout");
XxlJobHelper.log(e);
// handle result
XxlJobHelper.handleTimeout("job execute timeout ");
} finally {
futureThread.interrupt();
}
} else {
// just execute 没设置超时时间，则立刻执行触发器
handler.execute();
}
// valid execute handle data
if (XxlJobContext.getXxlJobContext().getHandleCode() <= 0) {
XxlJobHelper.handleFail("job handle result lost.");
} else {
String tempHandleMsg = XxlJobContext.getXxlJobContext().getHandleMsg();
tempHandleMsg = (tempHandleMsg!=null&&tempHandleMsg.length()>50000)
?tempHandleMsg.substring(0, 50000).concat("...")
:tempHandleMsg;
XxlJobContext.getXxlJobContext().setHandleMsg(tempHandleMsg);
}
XxlJobHelper.log("<br>----------- xxl-job job execute end(finish) -----------<br>----------- Result: handleCode="
+ XxlJobContext.getXxlJobContext().getHandleCode()
+ ", handleMsg = "
+ XxlJobContext.getXxlJobContext().getHandleMsg()
);
} else {
if (idleTimes > 30) { //空闲执行次数超过30次,且队列没任务,则删除并终止线程
if(triggerQueue.size() == 0) { // avoid concurrent trigger causes jobId-lost
XxlJobExecutor.removeJobThread(jobId, "excutor idel times over limit.");
}
}
}
} catch (Throwable e) {
if (toStop) {
XxlJobHelper.log("<br>----------- JobThread toStop, stopReason:" + stopReason);
}
// handle result
StringWriter stringWriter = new StringWriter();
e.printStackTrace(new PrintWriter(stringWriter));
String errorMsg = stringWriter.toString();
XxlJobHelper.handleFail(errorMsg);
XxlJobHelper.log("<br>----------- JobThread Exception:" + errorMsg + "<br>----------- xxl-job job execute end(error) -----------");
} finally {
if(triggerParam != null) {
// callback handler info
if (!toStop) {
// commonm 加入回调队列
TriggerCallbackThread.pushCallBack(new HandleCallbackParam(
triggerParam.getLogId(),
triggerParam.getLogDateTime(),
XxlJobContext.getXxlJobContext().getHandleCode(),
XxlJobContext.getXxlJobContext().getHandleMsg() )
);
} else {
// is killed
TriggerCallbackThread.pushCallBack(new HandleCallbackParam(
triggerParam.getLogId(),
triggerParam.getLogDateTime(),
XxlJobContext.HANDLE_COCE_FAIL,
stopReason + " [job running, killed]" )
);
}
}
}
}
// callback trigger request in queue
while(triggerQueue !=null && triggerQueue.size()>0){
TriggerParam triggerParam = triggerQueue.poll();
if (triggerParam!=null) {
// is killed 加入回调队列
TriggerCallbackThread.pushCallBack(new HandleCallbackParam(
triggerParam.getLogId(),
triggerParam.getLogDateTime(),
XxlJobContext.HANDLE_COCE_FAIL,
stopReason + " [job not executed, in the job queue, killed.]")
);
}
}
// destroy
try { //销毁,执行调度器设置的销毁方法
handler.destroy();
} catch (Throwable e) {
logger.error(e.getMessage(), e);
}
logger.info(">>>>>>>>>>> xxl-job JobThread stoped, hashCode:{}", Thread.currentThread());
}
4）3：客户端回调服务端
当服务端调用客户端执行后，会直接返回
com.xxl.job.core.biz.impl.ExecutorBizImpl#run
public ReturnT<String> pushTriggerQueue(TriggerParam triggerParam) {
// avoid repeat 若包含，则说明重复执行
if (triggerLogIdSet.contains(triggerParam.getLogId())) {
logger.info(">>>>>>>>>>> repeate trigger job, logId:{}", triggerParam.getLogId());
return new ReturnT<String>(ReturnT.FAIL_CODE, "repeate trigger job, logId:" + triggerParam.getLogId());
}
triggerLogIdSet.add(triggerParam.getLogId());
triggerQueue.add(triggerParam);
return ReturnT.SUCCESS;
}
服务端接收响应
随后封装成这样返回
这里xxl_job_log表trigger_code，200标识调用客户端成功,500标识调用失败(获取不到客户端地址)
当客户端执行完成后，会将处理回调参数任务加入触发器回调处理线程
com.xxl.job.core.thread.JobThread#run
com.xxl.job.core.thread.TriggerCallbackThread#start
调用服务端回调
private void doCallback(List<HandleCallbackParam> callbackParamList){
boolean callbackRet = false;
// callback, will retry if error 获取admin地址
for (AdminBiz adminBiz: XxlJobExecutor.getAdminBizList()) {
try { //回调admin,返回执行结果
ReturnT<String> callbackResult = adminBiz.callback(callbackParamList);
if (callbackResult!=null && ReturnT.SUCCESS_CODE == callbackResult.getCode()) {
callbackLog(callbackParamList, "<br>----------- xxl-job job callback finish.");
callbackRet = true;
break;
} else {
callbackLog(callbackParamList, "<br>----------- xxl-job job callback fail, callbackResult:" + callbackResult);
}
} catch (Exception e) {
callbackLog(callbackParamList, "<br>----------- xxl-job job callback error, errorMsg:" + e.getMessage());
}
}
if (!callbackRet) {
appendFailCallbackFile(callbackParamList);
}
}
public ReturnT<String> callback(List<HandleCallbackParam> callbackParamList) {
return XxlJobRemotingUtil.postBody(addressUrl+"api/callback", accessToken, timeout, callbackParamList, String.class);
}
com.xxl.job.admin.controller.JobApiController#api
public ReturnT<String> callback(List<HandleCallbackParam> callbackParamList) {
callbackThreadPool.execute(new Runnable() {
@Override
public void run() {
for (HandleCallbackParam handleCallbackParam: callbackParamList) {
ReturnT<String> callbackResult = callback(handleCallbackParam);
logger.debug(">>>>>>>>> JobApiController.callback {}, handleCallbackParam={}, callbackResult={}",
(callbackResult.getCode()== ReturnT.SUCCESS_CODE?"success":"fail"), handleCallbackParam, callbackResult);
}
}
});
return ReturnT.SUCCESS;
}
private ReturnT<String> callback(HandleCallbackParam handleCallbackParam) {
// valid log item 加载log
XxlJobLog log = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().load(handleCallbackParam.getLogId());
if (log == null) { //日志没找到返回异常
return new ReturnT<String>(ReturnT.FAIL_CODE, "log item not found.");
}
if (log.getHandleCode() > 0) { //说明重复执行
return new ReturnT<String>(ReturnT.FAIL_CODE, "log repeate callback."); // avoid repeat callback, trigger child job etc
}
// handle msg
StringBuffer handleMsg = new StringBuffer();
if (log.getHandleMsg()!=null) {
handleMsg.append(log.getHandleMsg()).append("<br>");
}
if (handleCallbackParam.getHandleMsg() != null) {
handleMsg.append(handleCallbackParam.getHandleMsg());
}
// success, save log 更改
log.setHandleTime(new Date());
log.setHandleCode(handleCallbackParam.getHandleCode()); //更改处理状态,200正常,500错误
log.setHandleMsg(handleMsg.toString());
XxlJobCompleter.updateHandleInfoAndFinish(log);
return ReturnT.SUCCESS;
}
4）3) 1：执行子任务
public static int updateHandleInfoAndFinish(XxlJobLog xxlJobLog) {
// finish 若父任务正常结束，则终止子任务,以及设置Childmsg
finishJob(xxlJobLog);
// text最大64kb 避免长度过长 截断超过长度限制字符
if (xxlJobLog.getHandleMsg().length() > 15000) {
xxlJobLog.setHandleMsg( xxlJobLog.getHandleMsg().substring(0, 15000) );
}
// fresh handle 更新joblog
return XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateHandleInfo(xxlJobLog);
}
private static void finishJob(XxlJobLog xxlJobLog){
// 1、handle success, to trigger child job
String triggerChildMsg = null;
if (XxlJobContext.HANDLE_COCE_SUCCESS == xxlJobLog.getHandleCode()) {
XxlJobInfo xxlJobInfo = XxlJobAdminConfig.getAdminConfig().getXxlJobInfoDao().loadById(xxlJobLog.getJobId());
if (xxlJobInfo!=null && xxlJobInfo.getChildJobId()!=null && xxlJobInfo.getChildJobId().trim().length()>0) {
triggerChildMsg = "<br><br><span style=\"color:#00c0ef;\" > >>>>>>>>>>>"+ I18nUtil.getString("jobconf_trigger_child_run") +"<<<<<<<<<<< </span><br>";
//获取子任务id
String[] childJobIds = xxlJobInfo.getChildJobId().split(",");
for (int i = 0; i < childJobIds.length; i++) {
int childJobId = (childJobIds[i]!=null && childJobIds[i].trim().length()>0 && isNumeric(childJobIds[i]))?Integer.valueOf(childJobIds[i]):-1;
if (childJobId > 0) {
//触发子任务
JobTriggerPoolHelper.trigger(childJobId, TriggerTypeEnum.PARENT, -1, null, null, null);
ReturnT<String> triggerChildResult = ReturnT.SUCCESS;
// add msg
triggerChildMsg += MessageFormat.format(I18nUtil.getString("jobconf_callback_child_msg1"),
(i+1),
childJobIds.length,
childJobIds[i],
(triggerChildResult.getCode()==ReturnT.SUCCESS_CODE?I18nUtil.getString("system_success"):I18nUtil.getString("system_fail")),
triggerChildResult.getMsg());
} else {
triggerChildMsg += MessageFormat.format(I18nUtil.getString("jobconf_callback_child_msg2"),
(i+1),
childJobIds.length,
childJobIds[i]);
}
}
}
}
if (triggerChildMsg != null) {
xxlJobLog.setHandleMsg( xxlJobLog.getHandleMsg() + triggerChildMsg );
}
// 2、fix_delay trigger next
// on the way
}
4）3) 2：针对超时任务设置返回值
com.xxl.job.admin.core.thread.JobCompleteHelper#start
// for monitor
monitorThread = new Thread(new Runnable() {
@Override
public void run() {
// wait for JobTriggerPoolHelper-init
try {
TimeUnit.MILLISECONDS.sleep(50);
} catch (InterruptedException e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
// monitor
while (!toStop) {
try {
// 任务结果丢失处理：调度记录停留在 "运行中" 状态超过10min，且对应执行器心跳注册失败不在线，则将本地调度主动标记失败；
Date losedTime = DateUtil.addMinutes(new Date(), -10);
//调度日志表： 用于保存XXL-JOB任务调度的历史信息，如调度结果、执行结果、调度入参、调度机器和执行器等等；
List<Long> losedJobIds = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().findLostJobIds(losedTime);
if (losedJobIds!=null && losedJobIds.size()>0) {
for (Long logId: losedJobIds) {
XxlJobLog jobLog = new XxlJobLog();
jobLog.setId(logId);
jobLog.setHandleTime(new Date());
jobLog.setHandleCode(ReturnT.FAIL_CODE);
jobLog.setHandleMsg( I18nUtil.getString("joblog_lost_fail") );
//更改处理状态
XxlJobCompleter.updateHandleInfoAndFinish(jobLog);
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(">>>>>>>>>>> xxl-job, job fail monitor thread error:{}", e);
}
}
try {
TimeUnit.SECONDS.sleep(60);
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, JobLosedMonitorHelper stop");
}
});
monitorThread.setDaemon(true);
monitorThread.setName("xxl-job, admin JobLosedMonitorHelper");
monitorThread.start();
- 被动触发 todo
============
时间轮机制
-
设计模式
======= -
1：策略模式
com.xxl.job.admin.core.trigger.XxlJobTrigger#processTrigger
路由策略：当执行器集群部署时，提供丰富的路由策略，包括；
FIRST（第一个）：固定选择第一个机器；
LAST（最后一个）：固定选择最后一个机器；
ROUND（轮询）：；
RANDOM（随机）：随机选择在线的机器；
CONSISTENT_HASH（一致性HASH）：每个任务按照Hash算法固定选择某一台机器，且所有任务均匀散列在不同机器上。
LEAST_FREQUENTLY_USED（最不经常使用）：使用频率最低的机器优先被选举；
LEAST_RECENTLY_USED（最近最久未使用）：最久未使用的机器优先被选举；
FAILOVER（故障转移）：按照顺序依次进行心跳检测，第一个心跳检测成功的机器选定为目标执行器并发起调度；
BUSYOVER（忙碌转移）：按照顺序依次进行空闲检测，第一个空闲检测成功的机器选定为目标执行器并发起调度；
SHARDING_BROADCAST(分片广播)：广播触发对应集群中所有机器执行一次任务，同时系统自动传递分片参数；可根据分片参数开发分片任务；
public class ExecutorRouteFirst extends ExecutorRouter {
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList){
return new ReturnT<String>(addressList.get(0));
}
}
- 2：单例
private static TriggerCallbackThread instance = new TriggerCallbackThread();
public static TriggerCallbackThread getInstance(){
return instance;
}
-
亮瞎眼的设计
========= -
1：路由策略
路由策略：当执行器集群部署时，提供丰富的路由策略，包括；
FIRST（第一个）：固定选择第一个机器；
LAST（最后一个）：固定选择最后一个机器；
ROUND（轮询）：；
RANDOM（随机）：随机选择在线的机器；
CONSISTENT_HASH（一致性HASH）：每个任务按照Hash算法固定选择某一台机器，且所有任务均匀散列在不同机器上。
LEAST_FREQUENTLY_USED（最不经常使用）：使用频率最低的机器优先被选举；
LEAST_RECENTLY_USED（最近最久未使用）：最久未使用的机器优先被选举；
FAILOVER（故障转移）：按照顺序依次进行心跳检测，第一个心跳检测成功的机器选定为目标执行器并发起调度；
BUSYOVER（忙碌转移）：按照顺序依次进行空闲检测，第一个空闲检测成功的机器选定为目标执行器并发起调度；
SHARDING_BROADCAST(分片广播)：广播触发对应集群中所有机器执行一次任务，同时系统自动传递分片参数；可根据分片参数开发分片任务；
- 子任务：每个任务都拥有一个唯一的任务ID(任务ID可以从任务列表获取)，当本任务执行结束并且执行成功时，将会触发子任务ID所对应的任务的一次主动调度。
public enum ExecutorRouteStrategyEnum {
FIRST(I18nUtil.getString("jobconf_route_first"), new ExecutorRouteFirst()), //（第一个）固定选择第一个机器
LAST(I18nUtil.getString("jobconf_route_last"), new ExecutorRouteLast()), //（最后一个）固定选择最后一个机器
ROUND(I18nUtil.getString("jobconf_route_round"), new ExecutorRouteRound()), //（轮询）轮询
RANDOM(I18nUtil.getString("jobconf_route_random"), new ExecutorRouteRandom()), //（随机）随机选择在线的机器；
CONSISTENT_HASH(I18nUtil.getString("jobconf_route_consistenthash"), new ExecutorRouteConsistentHash()), //（一致性HASH）每个任务按照Hash算法固定选择某一台机器，且所有任务均匀散列在不同机器上。
LEAST_FREQUENTLY_USED(I18nUtil.getString("jobconf_route_lfu"), new ExecutorRouteLFU()), //（最不经常使用）使用频率最低的机器优先被选举；
LEAST_RECENTLY_USED(I18nUtil.getString("jobconf_route_lru"), new ExecutorRouteLRU()), //（最近最久未使用）最久未使用的机器优先被选举；
FAILOVER(I18nUtil.getString("jobconf_route_failover"), new ExecutorRouteFailover()), //（故障转移）按照顺序依次进行心跳检测，第一个心跳检测成功的机器选定为目标执行器并发起调度；
BUSYOVER(I18nUtil.getString("jobconf_route_busyover"), new ExecutorRouteBusyover()), //（忙碌转移）按照顺序依次进行空闲检测，第一个空闲检测成功的机器选定为目标执行器并发起调度；
SHARDING_BROADCAST(I18nUtil.getString("jobconf_route_shard"), null); //(分片广播)广播触发对应集群中所有机器执行一次任务，同时系统自动传递分片参数；可根据分片参数开发分片任务；
}
7) 1）1： FIRST & LAST
public class ExecutorRouteFirst extends ExecutorRouter {
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList){
return new ReturnT<String>(addressList.get(0));
}
}
public class ExecutorRouteLast extends ExecutorRouter {
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
return new ReturnT<String>(addressList.get(addressList.size()-1));
}
}
7) 1）2： 轮询 & 随机
public class ExecutorRouteRound extends ExecutorRouter {
private static ConcurrentMap<Integer, AtomicInteger> routeCountEachJob = new ConcurrentHashMap<>();
private static long CACHE_VALID_TIME = 0;
private static int count(int jobId) {
// cache clear
//当超过缓存时间，则清除缓存,这里存储内存中
if (System.currentTimeMillis() > CACHE_VALID_TIME) {
routeCountEachJob.clear();
//缓存有效时间一天
CACHE_VALID_TIME = System.currentTimeMillis() + 1000*60*60*24;
}
AtomicInteger count = routeCountEachJob.get(jobId);
if (count == null || count.get() > 1000000) {
// 初始化时主动Random一次，缓解首次压力
// 将首次寻址分担到每个addressList上
count = new AtomicInteger(new Random().nextInt(100));
} else {
// count++
count.addAndGet(1);
}
routeCountEachJob.put(jobId, count);
return count.get();
}
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
String address = addressList.get(count(triggerParam.getJobId())%addressList.size());
return new ReturnT<String>(address);
}
}
public class ExecutorRouteRandom extends ExecutorRouter {
private static Random localRandom = new Random();
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
String address = addressList.get(localRandom.nextInt(addressList.size()));
return new ReturnT<String>(address);
}
}
7) 1）3： 一致性HASH
每个任务按照Hash算法固定选择某一台机器，且所有任务均匀散列在不同机器上。
7) 1）4： LFU & LRU
/**
* 单个JOB对应的每个执行器，使用频率最低的优先被选举
* a(*)、LFU(Least Frequently Used)：最不经常使用，频率/次数
* b、LRU(Least Recently Used)：最近最久未使用，时间
*
* Created by xuxueli on 17/3/10.
*/
public class ExecutorRouteLFU extends ExecutorRouter {
private static ConcurrentMap<Integer, HashMap<String, Integer>> jobLfuMap = new ConcurrentHashMap<Integer, HashMap<String, Integer>>();
private static long CACHE_VALID_TIME = 0;
public String route(int jobId, List<String> addressList) {
// cache clear 超过一天，则清除缓存
if (System.currentTimeMillis() > CACHE_VALID_TIME) {
jobLfuMap.clear();
CACHE_VALID_TIME = System.currentTimeMillis() + 1000*60*60*24;
}
// lfu item init
// Key排序可以用TreeMap+构造入参Compare；Value排序暂时只能通过ArrayList；
HashMap<String, Integer> lfuItemMap = jobLfuMap.get(jobId);
if (lfuItemMap == null) {
//说明第一次进来,则新建
lfuItemMap = new HashMap<String, Integer>();
// 避免重复覆盖
jobLfuMap.putIfAbsent(jobId, lfuItemMap);
}
// put new
//存储新的地址,同时随机设置访问次数,缓解第一次访问第一个元素的压力
for (String address: addressList) {
if (!lfuItemMap.containsKey(address) || lfuItemMap.get(address) >1000000 ) {
// 初始化时主动Random一次，缓解首次压力
lfuItemMap.put(address, new Random().nextInt(addressList.size()));
}
}
// remove old
//删除不存在的address
List<String> delKeys = new ArrayList<>();
for (String existKey: lfuItemMap.keySet()) {
if (!addressList.contains(existKey)) {
delKeys.add(existKey);
}
}
if (delKeys.size() > 0) {
for (String delKey: delKeys) {
lfuItemMap.remove(delKey);
}
}
// load least userd count address
//排序次数,降序排序
List<Map.Entry<String, Integer>> lfuItemList = new ArrayList<Map.Entry<String, Integer>>(lfuItemMap.entrySet());
Collections.sort(lfuItemList, new Comparator<Map.Entry<String, Integer>>() {
@Override
public int compare(Map.Entry<String, Integer> o1, Map.Entry<String, Integer> o2) {
return o1.getValue().compareTo(o2.getValue());
}
});
//获取最少访问次数的元素
Map.Entry<String, Integer> addressItem = lfuItemList.get(0);
String minAddress = addressItem.getKey();
//访问次数+1
addressItem.setValue(addressItem.getValue() + 1);
return addressItem.getKey();
}
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
String address = route(triggerParam.getJobId(), addressList);
return new ReturnT<String>(address);
}
}
package com.xxl.job.admin.core.route.strategy;
import com.xxl.job.admin.core.route.ExecutorRouter;
import com.xxl.job.core.biz.model.ReturnT;
import com.xxl.job.core.biz.model.TriggerParam;
import java.util.ArrayList;
import java.util.LinkedHashMap;
import java.util.List;
import java.util.concurrent.ConcurrentHashMap;
import java.util.concurrent.ConcurrentMap;
/**
* 单个JOB对应的每个执行器，最久为使用的优先被选举
* a、LFU(Least Frequently Used)：最不经常使用，频率/次数
* b(*)、LRU(Least Recently Used)：最近最久未使用，时间
*
* Created by xuxueli on 17/3/10.
*/
public class ExecutorRouteLRU extends ExecutorRouter {
private static ConcurrentMap<Integer, LinkedHashMap<String, String>> jobLRUMap = new ConcurrentHashMap<Integer, LinkedHashMap<String, String>>();
private static long CACHE_VALID_TIME = 0;
public String route(int jobId, List<String> addressList) {
// cache clear
if (System.currentTimeMillis() > CACHE_VALID_TIME) {
jobLRUMap.clear();
CACHE_VALID_TIME = System.currentTimeMillis() + 1000*60*60*24;
}
// init lru
LinkedHashMap<String, String> lruItem = jobLRUMap.get(jobId);
if (lruItem == null) {
/**
* LinkedHashMap
* a、accessOrder：true=访问顺序排序（get/put时排序）；false=插入顺序排期；
* b、removeEldestEntry：新增元素时将会调用，返回true时会删除最老元素；可封装LinkedHashMap并重写该方法，比如定义最大容量，超出是返回true即可实现固定长度的LRU算法；
*/
lruItem = new LinkedHashMap<String, String>(16, 0.75f, true);
jobLRUMap.putIfAbsent(jobId, lruItem);
}
// put new 添加新地址
for (String address: addressList) {
if (!lruItem.containsKey(address)) {
lruItem.put(address, address);
}
}
//删除旧地址
// remove old
List<String> delKeys = new ArrayList<>();
for (String existKey: lruItem.keySet()) {
if (!addressList.contains(existKey)) {
delKeys.add(existKey);
}
}
if (delKeys.size() > 0) {
for (String delKey: delKeys) {
lruItem.remove(delKey);
}
}
// load 获取第一个元素返回
String eldestKey = lruItem.entrySet().iterator().next().getKey();
//
String eldestValue = lruItem.get(eldestKey);
return eldestValue;
}
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
String address = route(triggerParam.getJobId(), addressList);
return new ReturnT<String>(address);
}
}
7) 1）5： 故障转移
按照顺序依次进行心跳检测，第一个心跳检测成功的机器选定为目标执行器并发起调度；
public class ExecutorRouteFailover extends ExecutorRouter {
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
StringBuffer beatResultSB = new StringBuffer();
//遍历配置的每个地址
for (String address : addressList) {
// beat
ReturnT<String> beatResult = null;
try {//获取executor-client
ExecutorBiz executorBiz = XxlJobScheduler.getExecutorBiz(address);
//检测心跳
beatResult = executorBiz.beat();
} catch (Exception e) {
//检测异常直接封装返回
logger.error(e.getMessage(), e);
beatResult = new ReturnT<String>(ReturnT.FAIL_CODE, ""+e );
}
beatResultSB.append( (beatResultSB.length()>0)?"<br><br>":"")
.append(I18nUtil.getString("jobconf_beat") + "：")
.append("<br>address：").append(address)
.append("<br>code：").append(beatResult.getCode())
.append("<br>msg：").append(beatResult.getMsg());
// beat success
if (beatResult.getCode() == ReturnT.SUCCESS_CODE) {
//设置访问client请求结果,以及地址返回
beatResult.setMsg(beatResultSB.toString());
beatResult.setContent(address);
return beatResult;
}
}
return new ReturnT<String>(ReturnT.FAIL_CODE, beatResultSB.toString());
}
}
private static ConcurrentMap<String, ExecutorBiz> executorBizRepository = new ConcurrentHashMap<String, ExecutorBiz>();
public static ExecutorBiz getExecutorBiz(String address) throws Exception {
// valid
if (address==null || address.trim().length()==0) {
return null;
}
// load-cache
//从缓冲中通过地址获取ExecutorBiz
address = address.trim();
ExecutorBiz executorBiz = executorBizRepository.get(address);
if (executorBiz != null) {
return executorBiz;
}
// set-cache 找不到就新建
executorBiz = new ExecutorBizClient(address, XxlJobAdminConfig.getAdminConfig().getAccessToken());
executorBizRepository.put(address, executorBiz);
return executorBiz;
}
7) 1）6： 忙碌转移
按照顺序依次进行空闲检测，第一个空闲检测成功的机器选定为目标执行器并发起调度；
public class ExecutorRouteBusyover extends ExecutorRouter {
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
StringBuffer idleBeatResultSB = new StringBuffer();
//遍历每个地址
for (String address : addressList) {
// beat
ReturnT<String> idleBeatResult = null;
try { //缓存获取ExecutorBiz
ExecutorBiz executorBiz = XxlJobScheduler.getExecutorBiz(address);
//访问客户端是否空闲
idleBeatResult = executorBiz.idleBeat(new IdleBeatParam(triggerParam.getJobId()));
} catch (Exception e) {
logger.error(e.getMessage(), e);
idleBeatResult = new ReturnT<String>(ReturnT.FAIL_CODE, ""+e );
}
idleBeatResultSB.append( (idleBeatResultSB.length()>0)?"<br><br>":"")
.append(I18nUtil.getString("jobconf_idleBeat") + "：")
.append("<br>address：").append(address)
.append("<br>code：").append(idleBeatResult.getCode())
.append("<br>msg：").append(idleBeatResult.getMsg());
// beat success
if (idleBeatResult.getCode() == ReturnT.SUCCESS_CODE) {
idleBeatResult.setMsg(idleBeatResultSB.toString());
idleBeatResult.setContent(address);
return idleBeatResult;
}
}
return new ReturnT<String>(ReturnT.FAIL_CODE, idleBeatResultSB.toString());
}
}
7) 1）7： 分片广播
广播触发对应集群中所有机器执行一次任务，同时系统自动传递分片参数；可根据分片参数开发分片任务；
- 2 ：加锁
com.xxl.job.admin.core.thread.JobScheduleHelper#start
表数据结构
一般情况下查询的时候，默认数据库加读锁，这种级别是很低的，当xxjob存在集群部署的时候，存在多个线程争抢查询数据库，会造成触发器重复执行。为了防止这种情况，设置手动提交(这里spring会默认自动提交)，查询添加写锁。在此期间其他线程访问的时候都会阻塞等待。
- 3 ：调度过期策略
public enum MisfireStrategyEnum {
/**
* do nothing
*/
//调度过期后，忽略过期的任务，从当前时间开始重新计算下次触发时间；
DO_NOTHING(I18nUtil.getString("misfire_strategy_do_nothing")),
/**
* fire once now
*/
//立即执行一次：调度过期后，立即执行一次，并从当前时间开始重新计算下次触发时间；
FIRE_ONCE_NOW(I18nUtil.getString("misfire_strategy_fire_once_now"));
}
com.xxl.job.admin.core.thread.JobScheduleHelper#start
- 4 ：任务阻塞策略
public enum ExecutorBlockStrategyEnum {
//单机串行（默认）：调度请求进入单机执行器后，调度请求进入FIFO队列并以串行方式运行；
SERIAL_EXECUTION("Serial execution"),
/*CONCURRENT_EXECUTION("并行"),*/ //丢弃后续调度：调度请求进入单机执行器后，发现执行器存在运行的调度任务，本次请求将会被丢弃并标记为失败；
DISCARD_LATER("Discard Later"),
//覆盖之前调度：调度请求进入单机执行器后，发现执行器存在运行的调度任务，将会终止运行中的调度任务并清空队列，然后运行本地调度任务；
COVER_EARLY("Cover Early");
}
com.xxl.job.core.biz.impl.ExecutorBizImpl#run
- 5 ：调度类型
public enum ScheduleTypeEnum {
//该类型不会主动触发调度；
NONE(I18nUtil.getString("schedule_type_none")),
/**
* schedule by cron
*/
//该类型将会通过CRON，触发任务调度；
CRON(I18nUtil.getString("schedule_type_cron")),
/**
* schedule by fixed rate (in seconds)
*/
//固定速度：该类型将会以固定速度，触发任务调度；按照固定的间隔时间，周期性触发；
FIX_RATE(I18nUtil.getString("schedule_type_fix_rate")),;
}
com.xxl.job.admin.core.thread.JobScheduleHelper#generateNextValidTime
public static Date generateNextValidTime(XxlJobInfo jobInfo, Date fromTime) throws Exception {
//匹配调度类型
ScheduleTypeEnum scheduleTypeEnum = ScheduleTypeEnum.match(jobInfo.getScheduleType(), null);
if (ScheduleTypeEnum.CRON == scheduleTypeEnum) {
//通过CRON，触发任务调度；
//通过cron表达式,获取下一次执行时间
Date nextValidTime = new CronExpression(jobInfo.getScheduleConf()).getNextValidTimeAfter(fromTime);
return nextValidTime;
} else if (ScheduleTypeEnum.FIX_RATE == scheduleTypeEnum /*|| ScheduleTypeEnum.FIX_DELAY == scheduleTypeEnum*/) {
//以固定速度，触发任务调度；按照固定的间隔时间，周期性触发；
return new Date(fromTime.getTime() + Integer.valueOf(jobInfo.getScheduleConf())*1000 );
}//没有匹配到调度类型,则null
return null;
}
固定速度和固定延迟是一样的…
- 6 ：上下文对象，便于jobhandler获取上下文数据
当执行jobhandler时，会提前将triggerParam一下参数赋值给XxlJobContext,该对象绑定执行jobhandler线程,便于执行调度器时获取服务端执行命令参数
XxlJobContext xxlJobContext = new XxlJobContext(
triggerParam.getJobId(),
triggerParam.getExecutorParams(),
logFileName,
triggerParam.getBroadcastIndex(),
triggerParam.getBroadcastTotal());
// init job context
XxlJobContext.setXxlJobContext(xxlJobContext);
// execute
XxlJobHelper.log("<br>----------- xxl-job job execute start -----------<br>----------- Param:" + xxlJobContext.getJobParam());
//设置了超时就异步线程处理
if (triggerParam.getExecutorTimeout() > 0) {
// limit timeout
Thread futureThread = null;
try {
FutureTask<Boolean> futureTask = new FutureTask<Boolean>(new Callable<Boolean>() {
@Override
public Boolean call() throws Exception {
// init job context
//便于jobhandler获取数据
XxlJobContext.setXxlJobContext(xxlJobContext);
handler.execute();
return true;
}
});
futureThread = new Thread(futureTask);
futureThread.start();
//异步线程处理并获取返回值
Boolean tempResult = futureTask.get(triggerParam.getExecutorTimeout(), TimeUnit.SECONDS);
} catch (TimeoutException e) {
XxlJobHelper.log("<br>----------- xxl-job job execute timeout");
XxlJobHelper.log(e);
// handle result
XxlJobHelper.handleTimeout("job execute timeout ");
} finally {
futureThread.interrupt();
}
} else {
// just execute 没设置超时时间，则立刻执行触发器
handler.execute();
}
jobhandler从上下文获取数据
-
疑难杂症
======= -
1：执行结果失败，但是任务执行成功
当调度调用client后，client立即返回。然后调度中心将调度结果修改为成功。clent执行成功后会回调调度中心。调度中心将执行结果修改为成功。倘若client执行时间过长(这里xxljob写死10分钟)，调度中心则将执行结果修改为失败。
com/xxl/job/admin/core/thread/JobCompleteHelper.java:76
- 2：执行器启动成功后，控制台一直反复报：xxl-rpc provider netty_http server caught exception
---------------------------------------------------------------------------------------------------------------------------------------------------------------### 文章目录
如何自研一个xxljob
- 注册服务
- 调度服务
- RPC组件(基建，底层严重依赖)
- 日志服务
- 告警服务
系统架构
执行流程
各大调度中心对比
1）服务端启动流程
首先找到配置类 XxlJobAdminConfig
可以发现该类实现 InitializingBean接口，这里直接看 afterPropertiesSet方法即可。
@Override
public void afterPropertiesSet() throws Exception {
//利用静态声明的只会加载一次的特性，初始化一个单例对象。
adminConfig = this;
//初始化xxjob调度器
xxlJobScheduler = new XxlJobScheduler();
xxlJobScheduler.init();
}
初始化xxjob调度器
public void init() throws Exception {
// init i18n
initI18n();
// admin trigger pool start
JobTriggerPoolHelper.toStart(); //初始化触发器线程池
// admin registry monitor run 30秒执行一次,维护注册表信息， 判断在线超时时间90s
JobRegistryHelper.getInstance().start();
// admin fail-monitor run 运行事变监视器,主要失败发送邮箱,重试触发器
JobFailMonitorHelper.getInstance().start();
// admin lose-monitor run ( depend on JobTriggerPoolHelper ) //将丢失主机信息调度日志更改状态
JobCompleteHelper.getInstance().start();
// admin log report start 统计一些失败成功报表
JobLogReportHelper.getInstance().start();
// start-schedule ( depend on JobTriggerPoolHelper ) 执行调度器
JobScheduleHelper.getInstance().start();
logger.info(">>>>>>>>> init xxl-job admin success.");
}
该方法主要做了如下事情：
- init i18n
- 初始化触发器线程池
- 维护注册表信息(30秒执行一次)
- 将丢失主机信息调度日志更改状态
- 统计一些失败成功报表,删除过期日志
- 执行调度器
1）1：初始化触发器线程池
public static void toStart() {
helper.start();
}
public void start(){
//最大200线程，最多处理1000任务
fastTriggerPool = new ThreadPoolExecutor(
10,
XxlJobAdminConfig.getAdminConfig().getTriggerPoolFastMax(),
60L,
TimeUnit.SECONDS,
new LinkedBlockingQueue<Runnable>(1000),
new ThreadFactory() {
@Override
public Thread newThread(Runnable r) {
return new Thread(r, "xxl-job, admin JobTriggerPoolHelper-fastTriggerPool-" + r.hashCode());
}
});
//最大100线程，最多处理2000任务
//一分钟内超时10次，则采用慢触发器执行
slowTriggerPool = new ThreadPoolExecutor(
10,
XxlJobAdminConfig.getAdminConfig().getTriggerPoolSlowMax(),
60L,
TimeUnit.SECONDS,
new LinkedBlockingQueue<Runnable>(2000),
new ThreadFactory() {
@Override
public Thread newThread(Runnable r) {
return new Thread(r, "xxl-job, admin JobTriggerPoolHelper-slowTriggerPool-" + r.hashCode());
}
});
}
注意：这里分别初始化了2个线程池，一个快一个慢，优先选择快，当一分钟以内任务超过10次执行时间超过500ms，则加入慢线程池执行。
1）2：维护注册表信息(30秒执行一次)
这里分别做了三件事
-
初始化注册或者删除线程池，主要负责客户端注册或者销毁到xxl_job_registry表
-
剔除超时注册机器
-
更新xxl_job_group执行器地址列表
public void start(){
// for registry or remove //初始化注册或者删除线程池 registryOrRemoveThreadPool = new ThreadPoolExecutor( 2, 10, 30L, TimeUnit.SECONDS, new LinkedBlockingQueue<Runnable>(2000), new ThreadFactory() { @Override public Thread newThread(Runnable r) { return new Thread(r, "xxl-job, admin JobRegistryMonitorHelper-registryOrRemoveThreadPool-" + r.hashCode()); } }, //注意:这里的拒绝策略就是再次执行...^_^''' new RejectedExecutionHandler() { @Override public void rejectedExecution(Runnable r, ThreadPoolExecutor executor) { r.run(); logger.warn(">>>>>>>>>>> xxl-job, registry or remove too fast, match threadpool rejected handler(run now)."); } }); // for monitor 30秒执行一次,维护注册表信息， 判断在线超时时间90s registryMonitorThread = new Thread(new Runnable() { @Override public void run() { while (!toStop) { try { // auto registry group List<XxlJobGroup> groupList = XxlJobAdminConfig.getAdminConfig().getXxlJobGroupDao().findByAddressType(0); if (groupList!=null && !groupList.isEmpty()) { // remove dead address (admin/executor) 从注册表中删除超时的机器 List<Integer> ids = XxlJobAdminConfig.getAdminConfig().getXxlJobRegistryDao().findDead(RegistryConfig.DEAD_TIMEOUT, new Date()); if (ids!=null && ids.size()>0) { XxlJobAdminConfig.getAdminConfig().getXxlJobRegistryDao().removeDead(ids); } // fresh online address (admin/executor) 获取所有在线机器 HashMap<String, List<String>> appAddressMap = new HashMap<String, List<String>>(); //维护注册表注册key和注册value List<XxlJobRegistry> list = XxlJobAdminConfig.getAdminConfig().getXxlJobRegistryDao().findAll(RegistryConfig.DEAD_TIMEOUT, new Date()); if (list != null) { for (XxlJobRegistry item: list) {//将注册类型为EXECUTOR的XxlJobRegistry集合改装成appname=>设置触发器的ip地址 if (RegistryConfig.RegistType.EXECUTOR.name().equals(item.getRegistryGroup())) { String appname = item.getRegistryKey(); List<String> registryList = appAddressMap.get(appname); if (registryList == null) { registryList = new ArrayList<String>(); } if (!registryList.contains(item.getRegistryValue())) { registryList.add(item.getRegistryValue()); } appAddressMap.put(appname, registryList); } } } // fresh group address 更新xxl_job_group执行器地址列表 for (XxlJobGroup group: groupList) { List<String> registryList = appAddressMap.get(group.getAppname()); String addressListStr = null;//将所有配置触发器的ip地址，使用,拼接 if (registryList!=null && !registryList.isEmpty()) { Collections.sort(registryList); StringBuilder addressListSB = new StringBuilder(); for (String item:registryList) { addressListSB.append(item).append(","); } addressListStr = addressListSB.toString(); addressListStr = addressListStr.substring(0, addressListStr.length()-1); } group.setAddressList(addressListStr);//更新设置了触发器的ip地址 group.setUpdateTime(new Date());//更新修改时间 XxlJobAdminConfig.getAdminConfig().getXxlJobGroupDao().update(group); } } } catch (Exception e) { if (!toStop) { logger.error(">>>>>>>>>>> xxl-job, job registry monitor thread error:{}", e); } } try { TimeUnit.SECONDS.sleep(RegistryConfig.BEAT_TIMEOUT); } catch (InterruptedException e) { if (!toStop) { logger.error(">>>>>>>>>>> xxl-job, job registry monitor thread error:{}", e); } } } logger.info(">>>>>>>>>>> xxl-job, job registry monitor thread stop"); } }); registryMonitorThread.setDaemon(true); registryMonitorThread.setName("xxl-job, admin JobRegistryMonitorHelper-registryMonitorThread"); registryMonitorThread.start(); }
1）3：运行失败监视器,主要失败发送邮箱,重试触发器
这里分别做了三件事
-
失败重试
这里判断失败有2种情况(trigger_code表示调度中心调用执行器状态，handle_code表示执行器执行结束后回调给调度中心的状态，200均标识成功，500标识失败)
第一种：trigger_code!=(0,200) 且 handle_code!=0
第二种：handle_code!=200 -
告警(这里可向spring注入JobAlarm)
public void start(){
monitorThread = new Thread(new Runnable() {@Override public void run() { // monitor while (!toStop) { try { //获取执行失败的日志 调度日志表： 用于保存XXL-JOB任务调度的历史信息，如调度结果、执行结果、调度入参、调度机器和执行器等等； List<Long> failLogIds = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().findFailJobLogIds(1000); if (failLogIds!=null && !failLogIds.isEmpty()) {//1:执行触发器成功,返回值失败.2:触发器失败 for (long failLogId: failLogIds) { // lock log 加锁，乐观修改alarm_status=-1 int lockRet = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateAlarmStatus(failLogId, 0, -1); if (lockRet < 1) { continue; } XxlJobLog log = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().load(failLogId); //获取失败日志具体信息 XxlJobInfo info = XxlJobAdminConfig.getAdminConfig().getXxlJobInfoDao().loadById(log.getJobId()); //加载job信息 // 1、fail retry monitor if (log.getExecutorFailRetryCount() > 0) { //若可重试次数>0,则再次执行触发器 JobTriggerPoolHelper.trigger(log.getJobId(), TriggerTypeEnum.RETRY, (log.getExecutorFailRetryCount()-1), log.getExecutorShardingParam(), log.getExecutorParam(), null); String retryMsg = "<br><br><span style=\"color:#F39C12;\" > >>>>>>>>>>>"+ I18nUtil.getString("jobconf_trigger_type_retry") +"<<<<<<<<<<< </span><br>"; log.setTriggerMsg(log.getTriggerMsg() + retryMsg); XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateTriggerInfo(log); //修改触发器执行信息 } // 2、fail alarm monitor 失败警告监视器 int newAlarmStatus = 0; // 告警状态：0-默认、-1=锁定状态、1-无需告警、2-告警成功、3-告警失败 if (info!=null && info.getAlarmEmail()!=null && info.getAlarmEmail().trim().length()>0) {//若设置报警邮箱，则执行报警 boolean alarmResult = XxlJobAdminConfig.getAdminConfig().getJobAlarmer().alarm(info, log); //发送警报 newAlarmStatus = alarmResult?2:3; //获取警报执行状态 } else {//没设置报警邮箱，则更改状态为不需要告警 newAlarmStatus = 1; } //释放锁 XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateAlarmStatus(failLogId, -1, newAlarmStatus); } } } catch (Exception e) { if (!toStop) { logger.error(">>>>>>>>>>> xxl-job, job fail monitor thread error:{}", e); } } try { TimeUnit.SECONDS.sleep(10); } catch (Exception e) { if (!toStop) { logger.error(e.getMessage(), e); } } } logger.info(">>>>>>>>>>> xxl-job, job fail monitor thread stop"); } }); monitorThread.setDaemon(true); monitorThread.setName("xxl-job, admin JobFailMonitorHelper"); monitorThread.start(); }
在这里可通过实现JobAlarm接口，注入spring容器执行报警。
boolean alarmResult = XxlJobAdminConfig.getAdminConfig().getJobAlarmer().alarm(info, log);
public boolean alarm(XxlJobInfo info, XxlJobLog jobLog) {
boolean result = false;
if (jobAlarmList!=null && jobAlarmList.size()>0) {
result = true; // success means all-success
for (JobAlarm alarm: jobAlarmList) {
boolean resultItem = false;
try {
resultItem = alarm.doAlarm(info, jobLog);
} catch (Exception e) {
logger.error(e.getMessage(), e);
}
if (!resultItem) {
result = false;
}
}
}
return result;
}
这里jobAlarmList集合里面有很多JobAlarm对象， 都是执行初始化方法从spring注入的，也就是说扩展的话，只需要实现JobAlarm接口，注入spring即可。
1）4：将丢失主机信息调度日志更改状态
public void start(){
// for callback 针对回调函数处理的线程池
callbackThreadPool = new ThreadPoolExecutor(
2,
20,
30L,
TimeUnit.SECONDS,
new LinkedBlockingQueue<Runnable>(3000),
new ThreadFactory() {
@Override
public Thread newThread(Runnable r) {
return new Thread(r, "xxl-job, admin JobLosedMonitorHelper-callbackThreadPool-" + r.hashCode());
}
},
new RejectedExecutionHandler() {
@Override
public void rejectedExecution(Runnable r, ThreadPoolExecutor executor) {
r.run();
logger.warn(">>>>>>>>>>> xxl-job, callback too fast, match threadpool rejected handler(run now).");
}
});
// for monitor
monitorThread = new Thread(new Runnable() {
@Override
public void run() {
// wait for JobTriggerPoolHelper-init
try {
TimeUnit.MILLISECONDS.sleep(50);
} catch (InterruptedException e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
// monitor
while (!toStop) {
try {
// 任务结果丢失处理：调度记录停留在 "运行中" 状态超过10min，且对应执行器心跳注册失败不在线，则将本地调度主动标记失败；
Date losedTime = DateUtil.addMinutes(new Date(), -10); //调度日志表： 用于保存XXL-JOB任务调度的历史信息，如调度结果、执行结果、调度入参、调度机器和执行器等等；
List<Long> losedJobIds = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().findLostJobIds(losedTime);
if (losedJobIds!=null && losedJobIds.size()>0) {
for (Long logId: losedJobIds) {
XxlJobLog jobLog = new XxlJobLog();
jobLog.setId(logId);
jobLog.setHandleTime(new Date());
jobLog.setHandleCode(ReturnT.FAIL_CODE);
jobLog.setHandleMsg( I18nUtil.getString("joblog_lost_fail") );
//更改处理状态
XxlJobCompleter.updateHandleInfoAndFinish(jobLog);
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(">>>>>>>>>>> xxl-job, job fail monitor thread error:{}", e);
}
}
try {
TimeUnit.SECONDS.sleep(60);
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, JobLosedMonitorHelper stop");
}
});
monitorThread.setDaemon(true);
monitorThread.setName("xxl-job, admin JobLosedMonitorHelper");
monitorThread.start();
}
更改处理状态
public static int updateHandleInfoAndFinish(XxlJobLog xxlJobLog) {
// finish 若父任务正常结束，则终止子任务,以及设置Childmsg
finishJob(xxlJobLog);
// text最大64kb 避免长度过长 截断超过长度限制字符
if (xxlJobLog.getHandleMsg().length() > 15000) {
xxlJobLog.setHandleMsg( xxlJobLog.getHandleMsg().substring(0, 15000) );
}
// fresh handle 更新超时joblog
return XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateHandleInfo(xxlJobLog);
}
1）5：统计一些失败成功报表,删除过期日志
public void start(){
logrThread = new Thread(new Runnable() {
//每分钟刷新一次
@Override
public void run() {
// last clean log time 记录上次清除日志时间
long lastCleanLogTime = 0;
while (!toStop) {
// 1、log-report refresh: refresh log report in 3 days
try {
for (int i = 0; i < 3; i++) {
// today 分别统计今天,昨天,前天0~24点的数据
Calendar itemDay = Calendar.getInstance();
itemDay.add(Calendar.DAY_OF_MONTH, -i);
itemDay.set(Calendar.HOUR_OF_DAY, 0);
itemDay.set(Calendar.MINUTE, 0);
itemDay.set(Calendar.SECOND, 0);
itemDay.set(Calendar.MILLISECOND, 0);
Date todayFrom = itemDay.getTime();
itemDay.set(Calendar.HOUR_OF_DAY, 23);
itemDay.set(Calendar.MINUTE, 59);
itemDay.set(Calendar.SECOND, 59);
itemDay.set(Calendar.MILLISECOND, 999);
Date todayTo = itemDay.getTime();
// refresh log-report every minute
//设置默认值
XxlJobLogReport xxlJobLogReport = new XxlJobLogReport();
xxlJobLogReport.setTriggerDay(todayFrom);
xxlJobLogReport.setRunningCount(0);
xxlJobLogReport.setSucCount(0);
xxlJobLogReport.setFailCount(0);
//查询失败, 成功，总的调用次数
Map<String, Object> triggerCountMap = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().findLogReport(todayFrom, todayTo);
if (triggerCountMap!=null && triggerCountMap.size()>0) {
int triggerDayCount = triggerCountMap.containsKey("triggerDayCount")?Integer.valueOf(String.valueOf(triggerCountMap.get("triggerDayCount"))):0;
int triggerDayCountRunning = triggerCountMap.containsKey("triggerDayCountRunning")?Integer.valueOf(String.valueOf(triggerCountMap.get("triggerDayCountRunning"))):0;
int triggerDayCountSuc = triggerCountMap.containsKey("triggerDayCountSuc")?Integer.valueOf(String.valueOf(triggerCountMap.get("triggerDayCountSuc"))):0;
int triggerDayCountFail = triggerDayCount - triggerDayCountRunning - triggerDayCountSuc;
xxlJobLogReport.setRunningCount(triggerDayCountRunning);
xxlJobLogReport.setSucCount(triggerDayCountSuc);
xxlJobLogReport.setFailCount(triggerDayCountFail);
}
// do refresh
//刷新调用次数,若找不到则默认都是0
int ret = XxlJobAdminConfig.getAdminConfig().getXxlJobLogReportDao().update(xxlJobLogReport);
if (ret < 1) {
//没数据则保存
XxlJobAdminConfig.getAdminConfig().getXxlJobLogReportDao().save(xxlJobLogReport);
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(">>>>>>>>>>> xxl-job, job log report thread error:{}", e);
}
}
// 2、log-clean: switch open & once each day
//设置了保留日志天数且日志保留了24小时，则进入
if (XxlJobAdminConfig.getAdminConfig().getLogretentiondays()>0
&& System.currentTimeMillis() - lastCleanLogTime > 24*60*60*1000) {
// expire-time
//通过日志保留天数算出清除log时间
Calendar expiredDay = Calendar.getInstance();
expiredDay.add(Calendar.DAY_OF_MONTH, -1 * XxlJobAdminConfig.getAdminConfig().getLogretentiondays());
expiredDay.set(Calendar.HOUR_OF_DAY, 0);
expiredDay.set(Calendar.MINUTE, 0);
expiredDay.set(Calendar.SECOND, 0);
expiredDay.set(Calendar.MILLISECOND, 0);
Date clearBeforeTime = expiredDay.getTime();
// clean expired log
List<Long> logIds = null;
do {
//这里传了3个0表示查询所有,而不是单个任务id
logIds = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().findClearLogIds(0, 0, clearBeforeTime, 0, 1000);
//删除过期数据
if (logIds!=null && logIds.size()>0) {
XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().clearLog(logIds);
}
} while (logIds!=null && logIds.size()>0);
// update clean time
lastCleanLogTime = System.currentTimeMillis();
}
try {
TimeUnit.MINUTES.sleep(1);
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, job log report thread stop");
}
});
logrThread.setDaemon(true);
logrThread.setName("xxl-job, admin JobLogReportHelper");
logrThread.start();
}
1）6：执行调度器
map这里用到了时间轮，
xxl-job 为了避免处理耗时太长，会跨过刻度，多向前校验一个刻度；也就是当指针指到 2s 时，会把 1s 和 2s 位置的任务同时读取出来。
public void start(){
// schedule thread
scheduleThread = new Thread(new Runnable() {
@Override
public void run() {
try { //保证5秒执行一次
TimeUnit.MILLISECONDS.sleep(5000 - System.currentTimeMillis()%1000 );
} catch (InterruptedException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
logger.info(">>>>>>>>> init xxl-job admin scheduler success.");
// pre-read count: treadpool-size * trigger-qps (each trigger cost 50ms, qps = 1000/50 = 20) 每个触发器花费50ms,每个线程单位时间内处理20任务,最多同时处理300*20=6000任务
int preReadCount = (XxlJobAdminConfig.getAdminConfig().getTriggerPoolFastMax() + XxlJobAdminConfig.getAdminConfig().getTriggerPoolSlowMax()) * 20;
while (!scheduleThreadToStop) {
// Scan Job
long start = System.currentTimeMillis();
Connection conn = null;
Boolean connAutoCommit = null;
PreparedStatement preparedStatement = null;
boolean preReadSuc = true;
try {
//设置手动提交
conn = XxlJobAdminConfig.getAdminConfig().getDataSource().getConnection();
connAutoCommit = conn.getAutoCommit();
conn.setAutoCommit(false);
//获取任务调度锁表内数据信息,加写锁
preparedStatement = conn.prepareStatement( "select * from xxl_job_lock where lock_name = 'schedule_lock' for update" );
preparedStatement.execute();
// tx start
// 1、pre read
long nowTime = System.currentTimeMillis(); //获取当前时间后5秒,同时最多负载的分页数
List<XxlJobInfo> scheduleList = XxlJobAdminConfig.getAdminConfig().getXxlJobInfoDao().scheduleJobQuery(nowTime + PRE_READ_MS, preReadCount);
if (scheduleList!=null && scheduleList.size()>0) {
// 2、push time-ring
for (XxlJobInfo jobInfo: scheduleList) {
// time-ring jump
if (nowTime > jobInfo.getTriggerNextTime() + PRE_READ_MS) { //触发器过期时间>5s
// 2.1、trigger-expire > 5s：pass && make next-trigger-time
logger.warn(">>>>>>>>>>> xxl-job, schedule misfire, jobId = " + jobInfo.getId());
// 1、misfire match
// - 调度过期策略：
// - 忽略：调度过期后，忽略过期的任务，从当前时间开始重新计算下次触发时间；
// - 立即执行一次：调度过期后，立即执行一次，并从当前时间开始重新计算下次触发时间；
MisfireStrategyEnum misfireStrategyEnum = MisfireStrategyEnum.match(jobInfo.getMisfireStrategy(), MisfireStrategyEnum.DO_NOTHING);
if (MisfireStrategyEnum.FIRE_ONCE_NOW == misfireStrategyEnum) { //若过期策略为FIRE_ONCE_NOW,则立即执行一次
// FIRE_ONCE_NOW 》 trigger //执行触发器
JobTriggerPoolHelper.trigger(jobInfo.getId(), TriggerTypeEnum.MISFIRE, -1, null, null, null);
logger.debug(">>>>>>>>>>> xxl-job, schedule push trigger : jobId = " + jobInfo.getId() );
}
// 2、fresh next 更新下次执行时间
refreshNextValidTime(jobInfo, new Date());
} else if (nowTime > jobInfo.getTriggerNextTime()) { //触发器过期时间<5s
// 2.2、trigger-expire < 5s：direct-trigger && make next-trigger-time
// 1、trigger //执行触发器
JobTriggerPoolHelper.trigger(jobInfo.getId(), TriggerTypeEnum.CRON, -1, null, null, null);
logger.debug(">>>>>>>>>>> xxl-job, schedule push trigger : jobId = " + jobInfo.getId() );
// 2、fresh next 更新下次执行时间
refreshNextValidTime(jobInfo, new Date());
// next-trigger-time in 5s, pre-read again 下次触发时间在当前时间往后5秒范围内
if (jobInfo.getTriggerStatus()==1 && nowTime + PRE_READ_MS > jobInfo.getTriggerNextTime()) {
// 1、make ring second 获取下次执行秒
int ringSecond = (int)((jobInfo.getTriggerNextTime()/1000)%60);
// 2、push time ring
pushTimeRing(ringSecond, jobInfo.getId());
// 3、fresh next 更新下次执行时间
refreshNextValidTime(jobInfo, new Date(jobInfo.getTriggerNextTime()));
}
} else {
// 2.3、trigger-pre-read：time-ring trigger && make next-trigger-time
//未来五秒以内执行的所有任务添加到ringData
// 1、make ring second
int ringSecond = (int)((jobInfo.getTriggerNextTime()/1000)%60);
// 2、push time ring
pushTimeRing(ringSecond, jobInfo.getId());
// 3、fresh next
refreshNextValidTime(jobInfo, new Date(jobInfo.getTriggerNextTime()));
}
}
// 3、update trigger info 更新执行时间和上次执行时间到数据库
for (XxlJobInfo jobInfo: scheduleList) {
XxlJobAdminConfig.getAdminConfig().getXxlJobInfoDao().scheduleUpdate(jobInfo);
}
} else {
preReadSuc = false;
}
// tx stop
} catch (Exception e) {
if (!scheduleThreadToStop) {
logger.error(">>>>>>>>>>> xxl-job, JobScheduleHelper#scheduleThread error:{}", e);
}
} finally {
// commit
if (conn != null) {
try {
conn.commit();
} catch (SQLException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
try {
conn.setAutoCommit(connAutoCommit);
} catch (SQLException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
try {
conn.close();
} catch (SQLException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
}
// close PreparedStatement
if (null != preparedStatement) {
try {
preparedStatement.close();
} catch (SQLException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
}
}
long cost = System.currentTimeMillis()-start;
// Wait seconds, align second
if (cost < 1000) { // scan-overtime, not wait
try {
// pre-read period: success > scan each second; fail > skip this period;
//若执行成功,每秒执行一次，失败则跳过5秒
TimeUnit.MILLISECONDS.sleep((preReadSuc?1000:PRE_READ_MS) - System.currentTimeMillis()%1000);
} catch (InterruptedException e) {
if (!scheduleThreadToStop) {
logger.error(e.getMessage(), e);
}
}
}
}
logger.info(">>>>>>>>>>> xxl-job, JobScheduleHelper#scheduleThread stop");
}
});
scheduleThread.setDaemon(true);
scheduleThread.setName("xxl-job, admin JobScheduleHelper#scheduleThread");
scheduleThread.start();
// ring thread
ringThread = new Thread(new Runnable() {
@Override
public void run() {
while (!ringThreadToStop) {
// align second
try {
TimeUnit.MILLISECONDS.sleep(1000 - System.currentTimeMillis() % 1000);
} catch (InterruptedException e) {
if (!ringThreadToStop) {
logger.error(e.getMessage(), e);
}
}
try {
// second data
List<Integer> ringItemData = new ArrayList<>();
int nowSecond = Calendar.getInstance().get(Calendar.SECOND); // 避免处理耗时太长，跨过刻度，向前校验一个刻度；
for (int i = 0; i < 2; i++) {
List<Integer> tmpData = ringData.remove( (nowSecond+60-i)%60 );
if (tmpData != null) {
ringItemData.addAll(tmpData);
}
}
// ring trigger
logger.debug(">>>>>>>>>>> xxl-job, time-ring beat : " + nowSecond + " = " + Arrays.asList(ringItemData) );
if (ringItemData.size() > 0) {
// do trigger
for (int jobId: ringItemData) {
// do trigger //执行触发器
JobTriggerPoolHelper.trigger(jobId, TriggerTypeEnum.CRON, -1, null, null, null);
}
// clear
ringItemData.clear();
}
} catch (Exception e) {
if (!ringThreadToStop) {
logger.error(">>>>>>>>>>> xxl-job, JobScheduleHelper#ringThread error:{}", e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, JobScheduleHelper#ringThread stop");
}
});
ringThread.setDaemon(true);
ringThread.setName("xxl-job, admin JobScheduleHelper#ringThread");
ringThread.start();
}
2）客户端启动流程
构建作业执行器
这里将 XxlJobSpringExecutor 交由容器托管
@Bean
public XxlJobSpringExecutor xxlJobExecutor() {
logger.info(">>>>>>>>>>> xxl-job config init.");
XxlJobSpringExecutor xxlJobSpringExecutor = new XxlJobSpringExecutor();
//xxjob管理地址
xxlJobSpringExecutor.setAdminAddresses(adminAddresses);
//注册应用名称
xxlJobSpringExecutor.setAppname(appname);
//xxl作业执行器注册表地址
xxlJobSpringExecutor.setAddress(address);
xxlJobSpringExecutor.setIp(ip);
xxlJobSpringExecutor.setPort(port);
//注册地址的token
xxlJobSpringExecutor.setAccessToken(accessToken);
//日志路径
xxlJobSpringExecutor.setLogPath(logPath);
//日志保存天数
xxlJobSpringExecutor.setLogRetentionDays(logRetentionDays);
return xxlJobSpringExecutor;
}
老规矩，直接看接口继承体系，可以发现注入了 ApplicationContext 对象。以及实现了 SmartInitializingSingleton 接口，实现该接口的当spring容器初始完成，紧接着执行监听器发送监听后，就会遍历所有的Bean然后初始化所有单例非懒加载的bean，最后在实例化阶段结束时触发回调接口。
// start
@Override
public void afterSingletonsInstantiated() {
// init JobHandler Repository
/*initJobHandlerRepository(applicationContext);*/
// init JobHandler Repository (for method) 初始化调度器资源管理器
initJobHandlerMethodRepository(applicationContext);
// refresh GlueFactory 刷新GlueFactory
GlueFactory.refreshInstance(1);
// super start
try {
super.start();
} catch (Exception e) {
throw new RuntimeException(e);
}
}
该方法主要做了如下事情：
- 初始化调度器资源管理器
2）1：初始化调度器资源管理器
该方法主要做了如下事情：
1.从spring容器获取所有对象，并遍历查找方法上标记XxlJob注解的方法
2. 将xxljob配置的jobname作为key，对象,反射的执行,初始,销毁方法作为value注册jobHandlerRepository 中
private void initJobHandlerMethodRepository(ApplicationContext applicationContext) {
if (applicationContext == null) {
return;
}
// init job handler from method
String[] beanDefinitionNames = applicationContext.getBeanNamesForType(Object.class, false, true);
for (String beanDefinitionName : beanDefinitionNames) {//遍历每个容器对象
Object bean = applicationContext.getBean(beanDefinitionName);
Map<Method, XxlJob> annotatedMethods = null; // referred to ：org.springframework.context.event.EventListenerMethodProcessor.processBean
try { //获取每个注解XxlJob方法
annotatedMethods = MethodIntrospector.selectMethods(bean.getClass(),
new MethodIntrospector.MetadataLookup<XxlJob>() {
@Override
public XxlJob inspect(Method method) {
return AnnotatedElementUtils.findMergedAnnotation(method, XxlJob.class);
}
});
} catch (Throwable ex) {
logger.error("xxl-job method-jobhandler resolve error for bean[" + beanDefinitionName + "].", ex);
}
if (annotatedMethods==null || annotatedMethods.isEmpty()) {
continue;
}
//遍历标记了XxlJob注解的方法
for (Map.Entry<Method, XxlJob> methodXxlJobEntry : annotatedMethods.entrySet()) {
Method executeMethod = methodXxlJobEntry.getKey();
XxlJob xxlJob = methodXxlJobEntry.getValue();
if (xxlJob == null) {
continue;
}
String name = xxlJob.value();//获取配置xxjob的触发器名称
if (name.trim().length() == 0) {
throw new RuntimeException("xxl-job method-jobhandler name invalid, for[" + bean.getClass() + "#" + executeMethod.getName() + "] .");
}
if (loadJobHandler(name) != null) { //工作处理资源库是否有相同命名
throw new RuntimeException("xxl-job jobhandler[" + name + "] naming conflicts.");
}
// execute method
/*if (!(method.getParameterTypes().length == 1 && method.getParameterTypes()[0].isAssignableFrom(String.class))) {
throw new RuntimeException("xxl-job method-jobhandler param-classtype invalid, for[" + bean.getClass() + "#" + method.getName() + "] , " +
"The correct method format like \" public ReturnT<String> execute(String param) \" .");
}
if (!method.getReturnType().isAssignableFrom(ReturnT.class)) {
throw new RuntimeException("xxl-job method-jobhandler return-classtype invalid, for[" + bean.getClass() + "#" + method.getName() + "] , " +
"The correct method format like \" public ReturnT<String> execute(String param) \" .");
}*/
executeMethod.setAccessible(true);//设置可访问,设置后可通过反射调用私有方法
// init and destory
Method initMethod = null;
Method destroyMethod = null;
if (xxlJob.init().trim().length() > 0) {
try { //获取XxlJob标记的方法,配置的init方法
initMethod = bean.getClass().getDeclaredMethod(xxlJob.init());
initMethod.setAccessible(true);
} catch (NoSuchMethodException e) {
throw new RuntimeException("xxl-job method-jobhandler initMethod invalid, for[" + bean.getClass() + "#" + executeMethod.getName() + "] .");
}
}
if (xxlJob.destroy().trim().length() > 0) {
try {//获取XxlJob标记的方法,配置的destroy方法
destroyMethod = bean.getClass().getDeclaredMethod(xxlJob.destroy());
destroyMethod.setAccessible(true);
} catch (NoSuchMethodException e) {
throw new RuntimeException("xxl-job method-jobhandler destroyMethod invalid, for[" + bean.getClass() + "#" + executeMethod.getName() + "] .");
}
}
// registry jobhandler 将xxljob配置的jobname作为key，对象,反射的执行,初始,销毁方法作为value注册jobHandlerRepository中
registJobHandler(name, new MethodJobHandler(bean, executeMethod, initMethod, destroyMethod));
}
}
}
2）2：刷新GlueFactory
public static void refreshInstance(int type){
if (type == 0) {
glueFactory = new GlueFactory();
} else if (type == 1) {
glueFactory = new SpringGlueFactory();
}
}
2）3：核心启动类
该方法主要做了如下事情：
-
初始化日志文件
-
初始化admin链接路径存储集合
-
清除过期日志
-
回调调度中心任务执行状态
-
执行内嵌服务
public void start() throws Exception { // init logpath XxlJobFileAppender.initLogPath(logPath);//初始化日志文件 // init invoker, admin-client initAdminBizList(adminAddresses, accessToken); //初始化admin链接路径存储集合 // init JobLogFileCleanThread 清除过期日志 JobLogFileCleanThread.getInstance().start(logRetentionDays); // init TriggerCallbackThread TriggerCallbackThread.getInstance().start(); // init executor-server 执行内嵌服务 initEmbedServer(address, ip, port, appname, accessToken); }
2）3）1：初始化日志文件
public static void initLogPath(String logPath){
// init
if (logPath!=null && logPath.trim().length()>0) {
logBasePath = logPath;
}
// mk base dir 日志文件不存在则创建
File logPathDir = new File(logBasePath);
if (!logPathDir.exists()) {
logPathDir.mkdirs();
}
logBasePath = logPathDir.getPath();
// mk glue dir 创建glue目录
File glueBaseDir = new File(logPathDir, "gluesource");
if (!glueBaseDir.exists()) {
glueBaseDir.mkdirs();
}
glueSrcPath = glueBaseDir.getPath();
}
2）3）2：初始化admin链接路径存储集合
private void initAdminBizList(String adminAddresses, String accessToken) throws Exception {
if (adminAddresses!=null && adminAddresses.trim().length()>0) {
for (String address: adminAddresses.trim().split(",")) { //多个admin地址以,分隔
if (address!=null && address.trim().length()>0) {
AdminBiz adminBiz = new AdminBizClient(address.trim(), accessToken);
if (adminBizList == null) {
adminBizList = new ArrayList<AdminBiz>();
} //将admin地址以及token添加adminBiz中
adminBizList.add(adminBiz);
}
}
}
}
2）3）3：主要清除过期日志
public void start(final long logRetentionDays){
// limit min value 日志最大保存天数<3天,直接退出
if (logRetentionDays < 3 ) {
return;
}
//一天执行一次
localThread = new Thread(new Runnable() {
@Override
public void run() {
while (!toStop) {
try {
// clean log dir, over logRetentionDays 查询目录下所有子文件(包含目录)
File[] childDirs = new File(XxlJobFileAppender.getLogPath()).listFiles();
if (childDirs!=null && childDirs.length>0) {
// today 获取今天0点时间
Calendar todayCal = Calendar.getInstance();
todayCal.set(Calendar.HOUR_OF_DAY,0);
todayCal.set(Calendar.MINUTE,0);
todayCal.set(Calendar.SECOND,0);
todayCal.set(Calendar.MILLISECOND,0);
Date todayDate = todayCal.getTime();
for (File childFile: childDirs) {
// valid 不是目录跳过
if (!childFile.isDirectory()) {
continue;
}//查询不到'-'则跳过
if (childFile.getName().indexOf("-") == -1) {
continue;
}
// file create date 获取文件创建时间,文件都是以年-月-日命名的
Date logFileCreateDate = null;
try {
SimpleDateFormat simpleDateFormat = new SimpleDateFormat("yyyy-MM-dd");
logFileCreateDate = simpleDateFormat.parse(childFile.getName());
} catch (ParseException e) {
logger.error(e.getMessage(), e);
}
if (logFileCreateDate == null) {
continue;
}
//大于日志最大存活时间则清除
if ((todayDate.getTime()-logFileCreateDate.getTime()) >= logRetentionDays * (24 * 60 * 60 * 1000) ) {
FileUtil.deleteRecursively(childFile);//超过保存天数则清除日志
}
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
try { //睡眠一天处理
TimeUnit.DAYS.sleep(1);
} catch (InterruptedException e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, executor JobLogFileCleanThread thread destory.");
}
});
localThread.setDaemon(true);
localThread.setName("xxl-job, executor JobLogFileCleanThread");
localThread.start();
}
2）3）4： 回调调度中心任务执行状态
具体看主动触发->客户端回调服务端
public void start() {
// valid 是否有配置admin路径
if (XxlJobExecutor.getAdminBizList() == null) {
logger.warn(">>>>>>>>>>> xxl-job, executor callback config fail, adminAddresses is null.");
return;
}
// callback
triggerCallbackThread = new Thread(new Runnable() {
@Override
public void run() {
// normal callback
while(!toStop){
try {
//获取回调参数
HandleCallbackParam callback = getInstance().callBackQueue.take();
if (callback != null) {
// callback list param
List<HandleCallbackParam> callbackParamList = new ArrayList<HandleCallbackParam>();
//移除队列中所有元素到callbackParamList中
int drainToNum = getInstance().callBackQueue.drainTo(callbackParamList);
callbackParamList.add(callback);
// callback, will retry if error 通知admin
if (callbackParamList!=null && callbackParamList.size()>0) {
doCallback(callbackParamList);
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
// last callback
try {
List<HandleCallbackParam> callbackParamList = new ArrayList<HandleCallbackParam>();
int drainToNum = getInstance().callBackQueue.drainTo(callbackParamList);
if (callbackParamList!=null && callbackParamList.size()>0) {
doCallback(callbackParamList);
}
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
logger.info(">>>>>>>>>>> xxl-job, executor callback thread destory.");
}
});
triggerCallbackThread.setDaemon(true);
triggerCallbackThread.setName("xxl-job, executor TriggerCallbackThread");
triggerCallbackThread.start();
// retry
triggerRetryCallbackThread = new Thread(new Runnable() {
@Override
public void run() {
while(!toStop){
try {
retryFailCallbackFile();
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
try {
TimeUnit.SECONDS.sleep(RegistryConfig.BEAT_TIMEOUT);
} catch (InterruptedException e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, executor retry callback thread destory.");
}
});
triggerRetryCallbackThread.setDaemon(true);
triggerRetryCallbackThread.start();
}
2）3）5： 执行内嵌服务
该方法主要做了如下事情：
-
使用netty开放端口，等待服务端调用
-
注册到服务端(心跳30S)
-
向服务端申请剔除服务
private void initEmbedServer(String address, String ip, int port, String appname, String accessToken) throws Exception { // fill ip port 若没设置端口,则寻找可用端口 port = port>0?port: NetUtil.findAvailablePort(9999); ip = (ip!=null&&ip.trim().length()>0)?ip: IpUtil.getIp(); //若没设置IP，则获取本机Ip // generate address 构造地址,若没设置地址,则将ip,port拼接成地址 if (address==null || address.trim().length()==0) { String ip_port_address = IpUtil.getIpPort(ip, port); // registry-address：default use address to registry , otherwise use ip:port if address is null address = "http://{ip_port}/".replace("{ip_port}", ip_port_address); } // accessToken if (accessToken==null || accessToken.trim().length()==0) { logger.warn(">>>>>>>>>>> xxl-job accessToken is empty. To ensure system security, please set the accessToken."); } // start 启动嵌入服务器 ,向服务端注册,以及监听端口,主要服务服务端调用。 embedServer = new EmbedServer(); embedServer.start(address, port, appname, accessToken); }public void start(final String address, final int port, final String appname, final String accessToken) {
executorBiz = new ExecutorBizImpl();
thread = new Thread(new Runnable() {@Override public void run() { // param EventLoopGroup bossGroup = new NioEventLoopGroup(); EventLoopGroup workerGroup = new NioEventLoopGroup(); ThreadPoolExecutor bizThreadPool = new ThreadPoolExecutor( 0, 200, 60L, TimeUnit.SECONDS, new LinkedBlockingQueue<Runnable>(2000), new ThreadFactory() { @Override public Thread newThread(Runnable r) { return new Thread(r, "xxl-rpc, EmbedServer bizThreadPool-" + r.hashCode()); } }, new RejectedExecutionHandler() { @Override public void rejectedExecution(Runnable r, ThreadPoolExecutor executor) { throw new RuntimeException("xxl-job, EmbedServer bizThreadPool is EXHAUSTED!"); } }); try { // start server ServerBootstrap bootstrap = new ServerBootstrap(); bootstrap.group(bossGroup, workerGroup) .channel(NioServerSocketChannel.class) .childHandler(new ChannelInitializer<SocketChannel>() { @Override public void initChannel(SocketChannel channel) throws Exception { channel.pipeline() .addLast(new IdleStateHandler(0, 0, 30 * 3, TimeUnit.SECONDS)) // beat 3N, close if idle .addLast(new HttpServerCodec()) .addLast(new HttpObjectAggregator(5 * 1024 * 1024)) // merge request & reponse to FULL .addLast(new EmbedHttpServerHandler(executorBiz, accessToken, bizThreadPool)); } }) .childOption(ChannelOption.SO_KEEPALIVE, true); // bind 异步绑定port上 ChannelFuture future = bootstrap.bind(port).sync(); logger.info(">>>>>>>>>>> xxl-job remoting server start success, nettype = {}, port = {}", EmbedServer.class, port); // start registry //注册 startRegistry(appname, address); // wait util stop future.channel().closeFuture().sync(); } catch (InterruptedException e) { if (e instanceof InterruptedException) { logger.info(">>>>>>>>>>> xxl-job remoting server stop."); } else { logger.error(">>>>>>>>>>> xxl-job remoting server error.", e); } } finally { // stop try { workerGroup.shutdownGracefully(); bossGroup.shutdownGracefully(); } catch (Exception e) { logger.error(e.getMessage(), e); } } } }); thread.setDaemon(true); // daemon, service jvm, user thread leave >>> daemon leave >>> jvm leave thread.start(); }
向服务端注册,默认30秒执行一次
public void startRegistry(final String appname, final String address) {
// start registry
ExecutorRegistryThread.getInstance().start(appname, address);
}
public void start(final String appname, final String address){
// valid appname不允许为null
if (appname==null || appname.trim().length()==0) {
logger.warn(">>>>>>>>>>> xxl-job, executor registry config fail, appname is null.");
return;
}//服务端地址不能为null
if (XxlJobExecutor.getAdminBizList() == null) {
logger.warn(">>>>>>>>>>> xxl-job, executor registry config fail, adminAddresses is null.");
return;
}
registryThread = new Thread(new Runnable() {
@Override
public void run() {
// registry
while (!toStop) {
try {
RegistryParam registryParam = new RegistryParam(RegistryConfig.RegistType.EXECUTOR.name(), appname, address);
for (AdminBiz adminBiz: XxlJobExecutor.getAdminBizList()) {
try {
ReturnT<String> registryResult = adminBiz.registry(registryParam); //向server注册服务(http请求),注册内容appname,当前服务监听地址
if (registryResult!=null && ReturnT.SUCCESS_CODE == registryResult.getCode()) { //访问成功
registryResult = ReturnT.SUCCESS;
logger.debug(">>>>>>>>>>> xxl-job registry success, registryParam:{}, registryResult:{}", new Object[]{registryParam, registryResult});
break;
} else {
logger.info(">>>>>>>>>>> xxl-job registry fail, registryParam:{}, registryResult:{}", new Object[]{registryParam, registryResult});
}
} catch (Exception e) {
logger.info(">>>>>>>>>>> xxl-job registry error, registryParam:{}", registryParam, e);
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
try {
if (!toStop) { //心跳时间30秒
TimeUnit.SECONDS.sleep(RegistryConfig.BEAT_TIMEOUT);
}
} catch (InterruptedException e) {
if (!toStop) {
logger.warn(">>>>>>>>>>> xxl-job, executor registry thread interrupted, error msg:{}", e.getMessage());
}
}
}
// registry remove 删除注册
try {
RegistryParam registryParam = new RegistryParam(RegistryConfig.RegistType.EXECUTOR.name(), appname, address);
for (AdminBiz adminBiz: XxlJobExecutor.getAdminBizList()) {
try {
ReturnT<String> registryResult = adminBiz.registryRemove(registryParam);
if (registryResult!=null && ReturnT.SUCCESS_CODE == registryResult.getCode()) {
registryResult = ReturnT.SUCCESS;
logger.info(">>>>>>>>>>> xxl-job registry-remove success, registryParam:{}, registryResult:{}", new Object[]{registryParam, registryResult});
break;
} else {
logger.info(">>>>>>>>>>> xxl-job registry-remove fail, registryParam:{}, registryResult:{}", new Object[]{registryParam, registryResult});
}
} catch (Exception e) {
if (!toStop) {
logger.info(">>>>>>>>>>> xxl-job registry-remove error, registryParam:{}", registryParam, e);
}
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
logger.info(">>>>>>>>>>> xxl-job, executor registry thread destory.");
}
});
registryThread.setDaemon(true);
registryThread.setName("xxl-job, executor ExecutorRegistryThread");
registryThread.start();
}
- 服务注册
=======
com.xxl.job.core.thread.ExecutorRegistryThread#start
@Override
public ReturnT<String> registry(RegistryParam registryParam) {
return XxlJobRemotingUtil.postBody(addressUrl + "api/registry", accessToken, timeout, registryParam, String.class);
}
服务端
com.xxl.job.admin.controller.JobApiController#api
public ReturnT<String> registry(RegistryParam registryParam) {
return JobRegistryHelper.getInstance().registry(registryParam);
}
public ReturnT<String> registry(RegistryParam registryParam) {
// valid 校验
if (!StringUtils.hasText(registryParam.getRegistryGroup())
|| !StringUtils.hasText(registryParam.getRegistryKey())
|| !StringUtils.hasText(registryParam.getRegistryValue())) {
return new ReturnT<String>(ReturnT.FAIL_CODE, "Illegal Argument.");
}
// async execute 异步注册
registryOrRemoveThreadPool.execute(new Runnable() {
@Override
public void run() { //更新修改时间
int ret = XxlJobAdminConfig.getAdminConfig().getXxlJobRegistryDao().registryUpdate(registryParam.getRegistryGroup(), registryParam.getRegistryKey(), registryParam.getRegistryValue(), new Date());
if (ret < 1) {//说明暂未数据,才新增
XxlJobAdminConfig.getAdminConfig().getXxlJobRegistryDao().registrySave(registryParam.getRegistryGroup(), registryParam.getRegistryKey(), registryParam.getRegistryValue(), new Date());
// fresh 空实现
freshGroupRegistryInfo(registryParam);
}
}
});
return ReturnT.SUCCESS;
}
客户端接收响应
- 主动触发
=======
4）1：服务端
触发地址：com.xxl.job.admin.controller.JobInfoController#triggerJob
@RequestMapping("/trigger")
@ResponseBody
//@PermissionLimit(limit = false)
public ReturnT<String> triggerJob(int id, String executorParam, String addressList) {
// force cover job param 设置默认值
if (executorParam == null) {
executorParam = "";
}
//触发器类型，手动 ，重试次数，'执行器任务分片参数，格式如 1/2'，任务参数，机器地址
JobTriggerPoolHelper.trigger(id, TriggerTypeEnum.MANUAL, -1, null, executorParam, addressList);
return ReturnT.SUCCESS;
}
执行触发器
public static void trigger(int jobId, TriggerTypeEnum triggerType, int failRetryCount, String executorShardingParam, String executorParam, String addressList) {
helper.addTrigger(jobId, triggerType, failRetryCount, executorShardingParam, executorParam, addressList);
}
public void addTrigger(final int jobId,
final TriggerTypeEnum triggerType,
final int failRetryCount,
final String executorShardingParam,
final String executorParam,
final String addressList) {
// choose thread pool 获取线程池
ThreadPoolExecutor triggerPool_ = fastTriggerPool;
//获取超时次数
AtomicInteger jobTimeoutCount = jobTimeoutCountMap.get(jobId);
//一分钟内超时10次，则采用慢触发器执行
if (jobTimeoutCount!=null && jobTimeoutCount.get() > 10) { // job-timeout 10 times in 1 min
triggerPool_ = slowTriggerPool;
}
// trigger
triggerPool_.execute(new Runnable() {
@Override
public void run() {
long start = System.currentTimeMillis();
try {
// do trigger //执行触发器
XxlJobTrigger.trigger(jobId, triggerType, failRetryCount, executorShardingParam, executorParam, addressList);
} catch (Exception e) {
logger.error(e.getMessage(), e);
} finally {
// check timeout-count-map 更新成为下一分钟
long minTim_now = System.currentTimeMillis()/60000;
if (minTim != minTim_now) {
minTim = minTim_now; //当达到下一分钟则清除超时任务
jobTimeoutCountMap.clear();
}
// incr timeout-count-map
long cost = System.currentTimeMillis()-start;
if (cost > 500) { // ob-timeout threshold 500ms
//执行时间超过500ms,则记录执行次数
AtomicInteger timeoutCount = jobTimeoutCountMap.putIfAbsent(jobId, new AtomicInteger(1));
if (timeoutCount != null) {
timeoutCount.incrementAndGet();
}
}
}
}
});
}
注意当触发器在一分钟内超时10次，则采用慢触发器执行
public static void trigger(int jobId,
TriggerTypeEnum triggerType,
int failRetryCount,
String executorShardingParam,
String executorParam,
String addressList) {
// load data 从数据库获取任务详情信息
XxlJobInfo jobInfo = XxlJobAdminConfig.getAdminConfig().getXxlJobInfoDao().loadById(jobId);
if (jobInfo == null) {
logger.warn(">>>>>>>>>>>> trigger fail, jobId invalid，jobId={}", jobId);
return;
}
if (executorParam != null) {
//设置任务参数
jobInfo.setExecutorParam(executorParam);
}
//获取失败重试次数
int finalFailRetryCount = failRetryCount>=0?failRetryCount:jobInfo.getExecutorFailRetryCount();
//获取job分组信息
XxlJobGroup group = XxlJobAdminConfig.getAdminConfig().getXxlJobGroupDao().load(jobInfo.getJobGroup());
// cover addressList 设置地址集合
if (addressList!=null && addressList.trim().length()>0) {
group.setAddressType(1);
group.setAddressList(addressList.trim());
}
// sharding param 拆分executorParam任务参数,填入shardingParam数组
int[] shardingParam = null;
if (executorShardingParam!=null){
String[] shardingArr = executorParam.split("/");
if (shardingArr.length==2 && isNumeric(shardingArr[0]) && isNumeric(shardingArr[1])) {
shardingParam = new int[2];
shardingParam[0] = Integer.valueOf(shardingArr[0]);
shardingParam[1] = Integer.valueOf(shardingArr[1]);
}
} //如果路由策略是分片广播模式，同时注册地址不为空
if (ExecutorRouteStrategyEnum.SHARDING_BROADCAST==ExecutorRouteStrategyEnum.match(jobInfo.getExecutorRouteStrategy(), null)
&& group.getRegistryList()!=null && !group.getRegistryList().isEmpty()
&& shardingParam==null) {
for (int i = 0; i < group.getRegistryList().size(); i++) { //遍历执行每个注册地址，集群广播
processTrigger(group, jobInfo, finalFailRetryCount, triggerType, i, group.getRegistryList().size());
}
} else {
if (shardingParam == null) { //当shardingParam为空，设置默认值,分别标识
shardingParam = new int[]{0, 1};
} //执行触发器
processTrigger(group, jobInfo, finalFailRetryCount, triggerType, shardingParam[0], shardingParam[1]);
}
}
这里会依据路由策略模式,选择对应的路由方式处理,采用了策略模式.
private static void processTrigger(XxlJobGroup group, XxlJobInfo jobInfo, int finalFailRetryCount, TriggerTypeEnum triggerType, int index, int total){
// param 获取阻塞处理策略
ExecutorBlockStrategyEnum blockStrategy = ExecutorBlockStrategyEnum.match(jobInfo.getExecutorBlockStrategy(), ExecutorBlockStrategyEnum.SERIAL_EXECUTION); // block strategy
// route strategy 获取路由策略,默认first
ExecutorRouteStrategyEnum executorRouteStrategyEnum = ExecutorRouteStrategyEnum.match(jobInfo.getExecutorRouteStrategy(), null);
String shardingParam = (ExecutorRouteStrategyEnum.SHARDING_BROADCAST==executorRouteStrategyEnum)?String.valueOf(index).concat("/").concat(String.valueOf(total)):null;
// 1、save log-id 保存执行日志
XxlJobLog jobLog = new XxlJobLog();
jobLog.setJobGroup(jobInfo.getJobGroup());
jobLog.setJobId(jobInfo.getId());
jobLog.setTriggerTime(new Date());
XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().save(jobLog);
logger.debug(">>>>>>>>>>> xxl-job trigger start, jobId:{}", jobLog.getId());
// 2、init trigger-param
TriggerParam triggerParam = new TriggerParam();
triggerParam.setJobId(jobInfo.getId());
triggerParam.setExecutorHandler(jobInfo.getExecutorHandler());
triggerParam.setExecutorParams(jobInfo.getExecutorParam());
triggerParam.setExecutorBlockStrategy(jobInfo.getExecutorBlockStrategy());
triggerParam.setExecutorTimeout(jobInfo.getExecutorTimeout());
triggerParam.setLogId(jobLog.getId());
triggerParam.setLogDateTime(jobLog.getTriggerTime().getTime());
triggerParam.setGlueType(jobInfo.getGlueType());
triggerParam.setGlueSource(jobInfo.getGlueSource());
triggerParam.setGlueUpdatetime(jobInfo.getGlueUpdatetime().getTime());
triggerParam.setBroadcastIndex(index);
triggerParam.setBroadcastTotal(total);
// 3、init address 获取触发器执行地址
String address = null;
ReturnT<String> routeAddressResult = null;
if (group.getRegistryList()!=null && !group.getRegistryList().isEmpty()) { //如果是集群广播模式
if (ExecutorRouteStrategyEnum.SHARDING_BROADCAST == executorRouteStrategyEnum) {
if (index < group.getRegistryList().size()) { //查询匹配地址执行
address = group.getRegistryList().get(index);
} else { //超过size,则默认执行第一个.
address = group.getRegistryList().get(0);
}
} else {
//根据设置的路由策略,执行路由器,获取返回结果 ,这里用到了策略模式
routeAddressResult = executorRouteStrategyEnum.getRouter().route(triggerParam, group.getRegistryList());
if (routeAddressResult.getCode() == ReturnT.SUCCESS_CODE) {
address = routeAddressResult.getContent();
}
}
} else { //获取不到注册地址，返回失败值
routeAddressResult = new ReturnT<String>(ReturnT.FAIL_CODE, I18nUtil.getString("jobconf_trigger_address_empty"));
}
// 4、trigger remote executor
ReturnT<String> triggerResult = null;
if (address != null) { //这里真正的执行触发器
triggerResult = runExecutor(triggerParam, address);
} else {//获取不到执行地址直接返回
triggerResult = new ReturnT<String>(ReturnT.FAIL_CODE, null);
}
// 5、collection trigger info
StringBuffer triggerMsgSb = new StringBuffer();
triggerMsgSb.append(I18nUtil.getString("jobconf_trigger_type")).append("：").append(triggerType.getTitle());
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobconf_trigger_admin_adress")).append("：").append(IpUtil.getIp());
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobconf_trigger_exe_regtype")).append("：")
.append( (group.getAddressType() == 0)?I18nUtil.getString("jobgroup_field_addressType_0"):I18nUtil.getString("jobgroup_field_addressType_1") );
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobconf_trigger_exe_regaddress")).append("：").append(group.getRegistryList());
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobinfo_field_executorRouteStrategy")).append("：").append(executorRouteStrategyEnum.getTitle());
if (shardingParam != null) {
triggerMsgSb.append("("+shardingParam+")");
}
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobinfo_field_executorBlockStrategy")).append("：").append(blockStrategy.getTitle());
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobinfo_field_timeout")).append("：").append(jobInfo.getExecutorTimeout());
triggerMsgSb.append("<br>").append(I18nUtil.getString("jobinfo_field_executorFailRetryCount")).append("：").append(finalFailRetryCount);
triggerMsgSb.append("<br><br><span style=\"color:#00c0ef;\" > >>>>>>>>>>>"+ I18nUtil.getString("jobconf_trigger_run") +"<<<<<<<<<<< </span><br>")
.append((routeAddressResult!=null&&routeAddressResult.getMsg()!=null)?routeAddressResult.getMsg()+"<br><br>":"").append(triggerResult.getMsg()!=null?triggerResult.getMsg():"");
// 6、save log trigger-info 更改执行日志状态
jobLog.setExecutorAddress(address);
jobLog.setExecutorHandler(jobInfo.getExecutorHandler());
jobLog.setExecutorParam(jobInfo.getExecutorParam());
jobLog.setExecutorShardingParam(shardingParam);
jobLog.setExecutorFailRetryCount(finalFailRetryCount);
//jobLog.setTriggerTime();
jobLog.setTriggerCode(triggerResult.getCode());//设置执行触发器返回值
jobLog.setTriggerMsg(triggerMsgSb.toString());//设置返回结果信息
XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateTriggerInfo(jobLog);
logger.debug(">>>>>>>>>>> xxl-job trigger end, jobId:{}", jobLog.getId());
}
路由策略
FIRST(I18nUtil.getString(“jobconf_route_first”), new ExecutorRouteFirst()), //（第一个）固定选择第一个机器
LAST(I18nUtil.getString(“jobconf_route_last”), new ExecutorRouteLast()), //（最后一个）固定选择最后一个机器
ROUND(I18nUtil.getString(“jobconf_route_round”), new ExecutorRouteRound()), //（轮询）轮询
RANDOM(I18nUtil.getString(“jobconf_route_random”), new ExecutorRouteRandom()), //（随机）随机选择在线的机器；
CONSISTENT_HASH(I18nUtil.getString(“jobconf_route_consistenthash”), new ExecutorRouteConsistentHash()), //（一致性HASH）每个任务按照Hash算法固定选择某一台机器，且所有任务均匀散列在不同机器上。
LEAST_FREQUENTLY_USED(I18nUtil.getString(“jobconf_route_lfu”), new ExecutorRouteLFU()), //（最不经常使用）使用频率最低的机器优先被选举；
LEAST_RECENTLY_USED(I18nUtil.getString(“jobconf_route_lru”), new ExecutorRouteLRU()), //（最近最久未使用）最久未使用的机器优先被选举；
FAILOVER(I18nUtil.getString(“jobconf_route_failover”), new ExecutorRouteFailover()), //（故障转移）按照顺序依次进行心跳检测，第一个心跳检测成功的机器选定为目标执行器并发起调度；
BUSYOVER(I18nUtil.getString(“jobconf_route_busyover”), new ExecutorRouteBusyover()), //（忙碌转移）按照顺序依次进行空闲检测，第一个空闲检测成功的机器选定为目标执行器并发起调度；
SHARDING_BROADCAST(I18nUtil.getString(“jobconf_route_shard”), null); //(分片广播)广播触发对应集群中所有机器执行一次任务，同时系统自动传递分片参数；可根据分片参数开发分片任务；
这里默认固定选择第一个机器
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList){
return new ReturnT<String>(addressList.get(0));
}
执行触发器
拼接http+token地址
public static ReturnT<String> runExecutor(TriggerParam triggerParam, String address){
ReturnT<String> runResult = null;
try {
ExecutorBiz executorBiz = XxlJobScheduler.getExecutorBiz(address);//获取业务执行器地址,就执行器地址后面拼接token
runResult = executorBiz.run(triggerParam);
} catch (Exception e) {
logger.error(">>>>>>>>>>> xxl-job trigger error, please check if the executor[{}] is running.", address, e);
runResult = new ReturnT<String>(ReturnT.FAIL_CODE, ThrowableUtil.toString(e));
}
//返回结果设置msg
StringBuffer runResultSB = new StringBuffer(I18nUtil.getString("jobconf_trigger_run") + "：");
runResultSB.append("<br>address：").append(address);
runResultSB.append("<br>code：").append(runResult.getCode());
runResultSB.append("<br>msg：").append(runResult.getMsg());
runResult.setMsg(runResultSB.toString());
return runResult;
}
访问执行
@Override
public ReturnT<String> run(TriggerParam triggerParam) {
return XxlJobRemotingUtil.postBody(addressUrl + "run", accessToken, timeout, triggerParam, String.class);
}
4）2：客户端
@Override
protected void channelRead0(final ChannelHandlerContext ctx, FullHttpRequest msg) throws Exception {
// request parse
//final byte[] requestBytes = ByteBufUtil.getBytes(msg.content()); // byteBuf.toString(io.netty.util.CharsetUtil.UTF_8);
String requestData = msg.content().toString(CharsetUtil.UTF_8);//解析请求数据
String uri = msg.uri();//获取uri,后面通过uri来处理不同的请求
HttpMethod httpMethod = msg.method();//获取请求方式,Post/Get
boolean keepAlive = HttpUtil.isKeepAlive(msg);//保持长连接
String accessTokenReq = msg.headers().get(XxlJobRemotingUtil.XXL_JOB_ACCESS_TOKEN);
// invoke
bizThreadPool.execute(new Runnable() {
@Override
public void run() {
// do invoke
Object responseObj = process(httpMethod, uri, requestData, accessTokenReq);
// to json 响应结果转json
String responseJson = GsonTool.toJson(responseObj);
// write response
writeResponse(ctx, keepAlive, responseJson);
}
});
}
执行触发器
private Object process(HttpMethod httpMethod, String uri, String requestData, String accessTokenReq) {
// valid 不是POST直接返回异常
if (HttpMethod.POST != httpMethod) {
return new ReturnT<String>(ReturnT.FAIL_CODE, "invalid request, HttpMethod not support.");
}
if (uri==null || uri.trim().length()==0) { //校验uri
return new ReturnT<String>(ReturnT.FAIL_CODE, "invalid request, uri-mapping empty.");
}//校验token是否正确
if (accessToken!=null
&& accessToken.trim().length()>0
&& !accessToken.equals(accessTokenReq)) {
return new ReturnT<String>(ReturnT.FAIL_CODE, "The access token is wrong.");
}
// services mapping
try {
if ("/beat".equals(uri)) {
return executorBiz.beat();
} else if ("/idleBeat".equals(uri)) {
IdleBeatParam idleBeatParam = GsonTool.fromJson(requestData, IdleBeatParam.class);
return executorBiz.idleBeat(idleBeatParam);
} else if ("/run".equals(uri)) { //执行触发器
TriggerParam triggerParam = GsonTool.fromJson(requestData, TriggerParam.class);//请求参数解析成TriggerParam
return executorBiz.run(triggerParam);
} else if ("/kill".equals(uri)) {
KillParam killParam = GsonTool.fromJson(requestData, KillParam.class);
return executorBiz.kill(killParam);
} else if ("/log".equals(uri)) {
LogParam logParam = GsonTool.fromJson(requestData, LogParam.class);
return executorBiz.log(logParam);
} else {
return new ReturnT<String>(ReturnT.FAIL_CODE, "invalid request, uri-mapping("+ uri +") not found.");
}
} catch (Exception e) {
logger.error(e.getMessage(), e);
return new ReturnT<String>(ReturnT.FAIL_CODE, "request error:" + ThrowableUtil.toString(e));
}
}
-
绑定作业到具体线程，启动线程
-
任务丢入线程处理
@Override
public ReturnT run(TriggerParam triggerParam) {
// load old：jobHandler + jobThread
//获取job绑定线程
JobThread jobThread = XxlJobExecutor.loadJobThread(triggerParam.getJobId());
//获取作业处理器
IJobHandler jobHandler = jobThread!=null?jobThread.getHandler():null;
String removeOldReason = null;// valid：jobHandler + jobThread //获取任务运行模式 GlueTypeEnum glueTypeEnum = GlueTypeEnum.match(triggerParam.getGlueType()); //任务以JobHandler方式维护在执行器端；需要结合 "JobHandler" 属性匹配执行器中任务； if (GlueTypeEnum.BEAN == glueTypeEnum) { // new jobhandler 获取job处理器,也就是方法声明 IJobHandler newJobHandler = XxlJobExecutor.loadJobHandler(triggerParam.getExecutorHandler()); // valid old jobThread 如果job处理器不一样,则kill旧处理器绑定的线程 if (jobThread!=null && jobHandler != newJobHandler) { // change handler, need kill old thread removeOldReason = "change jobhandler or glue type, and terminate the old job thread."; jobThread = null; jobHandler = null; } // valid handler //执行到这儿,要么新旧处理器不一致,要么没有绑定过任何线程 if (jobHandler == null) { jobHandler = newJobHandler; //没找到处理器,直接返回异常 if (jobHandler == null) { return new ReturnT<String>(ReturnT.FAIL_CODE, "job handler [" + triggerParam.getExecutorHandler() + "] not found."); } } } else if (GlueTypeEnum.GLUE_GROOVY == glueTypeEnum) { // valid old jobThread if (jobThread != null && !(jobThread.getHandler() instanceof GlueJobHandler && ((GlueJobHandler) jobThread.getHandler()).getGlueUpdatetime()==triggerParam.getGlueUpdatetime() )) { // change handler or gluesource updated, need kill old thread removeOldReason = "change job source or glue type, and terminate the old job thread."; jobThread = null; jobHandler = null; } // valid handler if (jobHandler == null) { try { IJobHandler originJobHandler = GlueFactory.getInstance().loadNewInstance(triggerParam.getGlueSource()); jobHandler = new GlueJobHandler(originJobHandler, triggerParam.getGlueUpdatetime()); } catch (Exception e) { logger.error(e.getMessage(), e); return new ReturnT<String>(ReturnT.FAIL_CODE, e.getMessage()); } } } else if (glueTypeEnum!=null && glueTypeEnum.isScript()) { // valid old jobThread if (jobThread != null && !(jobThread.getHandler() instanceof ScriptJobHandler && ((ScriptJobHandler) jobThread.getHandler()).getGlueUpdatetime()==triggerParam.getGlueUpdatetime() )) { // change script or gluesource updated, need kill old thread removeOldReason = "change job source or glue type, and terminate the old job thread."; jobThread = null; jobHandler = null; } // valid handler if (jobHandler == null) { jobHandler = new ScriptJobHandler(triggerParam.getJobId(), triggerParam.getGlueUpdatetime(), triggerParam.getGlueSource(), GlueTypeEnum.match(triggerParam.getGlueType())); } } else { return new ReturnT<String>(ReturnT.FAIL_CODE, "glueType[" + triggerParam.getGlueType() + "] is not valid."); } // executor block strategy //获取任务阻塞策略 if (jobThread != null) { ExecutorBlockStrategyEnum blockStrategy = ExecutorBlockStrategyEnum.match(triggerParam.getExecutorBlockStrategy(), null); if (ExecutorBlockStrategyEnum.DISCARD_LATER == blockStrategy) { // discard when running if (jobThread.isRunningOrHasQueue()) { return new ReturnT<String>(ReturnT.FAIL_CODE, "block strategy effect："+ExecutorBlockStrategyEnum.DISCARD_LATER.getTitle()); } } else if (ExecutorBlockStrategyEnum.COVER_EARLY == blockStrategy) { // kill running jobThread if (jobThread.isRunningOrHasQueue()) { removeOldReason = "block strategy effect：" + ExecutorBlockStrategyEnum.COVER_EARLY.getTitle(); jobThread = null; } } else { // just queue trigger } } // replace thread (new or exists invalid) //作业没绑定过线程,则绑定作业到具体线程 if (jobThread == null) { jobThread = XxlJobExecutor.registJobThread(triggerParam.getJobId(), jobHandler, removeOldReason); } // push data to queue 任务丢入线程处理 ReturnT<String> pushResult = jobThread.pushTriggerQueue(triggerParam); return pushResult; }
绑定作业到具体线程，启动线程
public static JobThread registJobThread(int jobId, IJobHandler handler, String removeOldReason){
JobThread newJobThread = new JobThread(jobId, handler);//启动新线程处理工作任务
newJobThread.start();
logger.info(">>>>>>>>>>> xxl-job regist JobThread success, jobId:{}, handler:{}", new Object[]{jobId, handler});
//存储jobId与绑定工作的线程
JobThread oldJobThread = jobThreadRepository.put(jobId, newJobThread); // putIfAbsent | oh my god, map's put method return the old value!!!
if (oldJobThread != null) {//中断并删除旧线程
oldJobThread.toStop(removeOldReason);
oldJobThread.interrupt();
}
return newJobThread;
}
任务丢入线程处理
public ReturnT<String> pushTriggerQueue(TriggerParam triggerParam) {
// avoid repeat 若包含，则说明重复执行
if (triggerLogIdSet.contains(triggerParam.getLogId())) {
logger.info(">>>>>>>>>>> repeate trigger job, logId:{}", triggerParam.getLogId());
return new ReturnT<String>(ReturnT.FAIL_CODE, "repeate trigger job, logId:" + triggerParam.getLogId());
}
triggerLogIdSet.add(triggerParam.getLogId());
triggerQueue.add(triggerParam);
return ReturnT.SUCCESS;
}
具体执行触发器逻辑
@Override
public void run() {
// init
try {
handler.init();//执行初始化任务
} catch (Throwable e) {
logger.error(e.getMessage(), e);
}
// execute
while(!toStop){
running = false;
idleTimes++;//统计空闲执行次数
TriggerParam triggerParam = null;
try {
// to check toStop signal, we need cycle, so wo cannot use queue.take(), instand of poll(timeout)
triggerParam = triggerQueue.poll(3L, TimeUnit.SECONDS); //获取触发器任务
if (triggerParam!=null) {
running = true;
idleTimes = 0;//空闲次数重置
triggerLogIdSet.remove(triggerParam.getLogId()); //删除logId主要用来判断是否重复执行
// log filename, like "logPath/yyyy-MM-dd/9999.log" 写入log文件
String logFileName = XxlJobFileAppender.makeLogFileName(new Date(triggerParam.getLogDateTime()), triggerParam.getLogId());
XxlJobContext xxlJobContext = new XxlJobContext(
triggerParam.getJobId(),
triggerParam.getExecutorParams(),
logFileName,
triggerParam.getBroadcastIndex(),
triggerParam.getBroadcastTotal());
// init job context
XxlJobContext.setXxlJobContext(xxlJobContext);
// execute
XxlJobHelper.log("<br>----------- xxl-job job execute start -----------<br>----------- Param:" + xxlJobContext.getJobParam());
//设置了超时就异步线程处理
if (triggerParam.getExecutorTimeout() > 0) {
// limit timeout
Thread futureThread = null;
try {
FutureTask<Boolean> futureTask = new FutureTask<Boolean>(new Callable<Boolean>() {
@Override
public Boolean call() throws Exception {
// init job context
XxlJobContext.setXxlJobContext(xxlJobContext);
handler.execute();
return true;
}
});
futureThread = new Thread(futureTask);
futureThread.start();
//异步线程处理并获取返回值
Boolean tempResult = futureTask.get(triggerParam.getExecutorTimeout(), TimeUnit.SECONDS);
} catch (TimeoutException e) {
XxlJobHelper.log("<br>----------- xxl-job job execute timeout");
XxlJobHelper.log(e);
// handle result
XxlJobHelper.handleTimeout("job execute timeout ");
} finally {
futureThread.interrupt();
}
} else {
// just execute 没设置超时时间，则立刻执行触发器
handler.execute();
}
// valid execute handle data
if (XxlJobContext.getXxlJobContext().getHandleCode() <= 0) {
XxlJobHelper.handleFail("job handle result lost.");
} else {
String tempHandleMsg = XxlJobContext.getXxlJobContext().getHandleMsg();
tempHandleMsg = (tempHandleMsg!=null&&tempHandleMsg.length()>50000)
?tempHandleMsg.substring(0, 50000).concat("...")
:tempHandleMsg;
XxlJobContext.getXxlJobContext().setHandleMsg(tempHandleMsg);
}
XxlJobHelper.log("<br>----------- xxl-job job execute end(finish) -----------<br>----------- Result: handleCode="
+ XxlJobContext.getXxlJobContext().getHandleCode()
+ ", handleMsg = "
+ XxlJobContext.getXxlJobContext().getHandleMsg()
);
} else {
if (idleTimes > 30) { //空闲执行次数超过30次,且队列没任务,则删除并终止线程
if(triggerQueue.size() == 0) { // avoid concurrent trigger causes jobId-lost
XxlJobExecutor.removeJobThread(jobId, "excutor idel times over limit.");
}
}
}
} catch (Throwable e) {
if (toStop) {
XxlJobHelper.log("<br>----------- JobThread toStop, stopReason:" + stopReason);
}
// handle result
StringWriter stringWriter = new StringWriter();
e.printStackTrace(new PrintWriter(stringWriter));
String errorMsg = stringWriter.toString();
XxlJobHelper.handleFail(errorMsg);
XxlJobHelper.log("<br>----------- JobThread Exception:" + errorMsg + "<br>----------- xxl-job job execute end(error) -----------");
} finally {
if(triggerParam != null) {
// callback handler info
if (!toStop) {
// commonm 加入回调队列
TriggerCallbackThread.pushCallBack(new HandleCallbackParam(
triggerParam.getLogId(),
triggerParam.getLogDateTime(),
XxlJobContext.getXxlJobContext().getHandleCode(),
XxlJobContext.getXxlJobContext().getHandleMsg() )
);
} else {
// is killed
TriggerCallbackThread.pushCallBack(new HandleCallbackParam(
triggerParam.getLogId(),
triggerParam.getLogDateTime(),
XxlJobContext.HANDLE_COCE_FAIL,
stopReason + " [job running, killed]" )
);
}
}
}
}
// callback trigger request in queue
while(triggerQueue !=null && triggerQueue.size()>0){
TriggerParam triggerParam = triggerQueue.poll();
if (triggerParam!=null) {
// is killed 加入回调队列
TriggerCallbackThread.pushCallBack(new HandleCallbackParam(
triggerParam.getLogId(),
triggerParam.getLogDateTime(),
XxlJobContext.HANDLE_COCE_FAIL,
stopReason + " [job not executed, in the job queue, killed.]")
);
}
}
// destroy
try { //销毁,执行调度器设置的销毁方法
handler.destroy();
} catch (Throwable e) {
logger.error(e.getMessage(), e);
}
logger.info(">>>>>>>>>>> xxl-job JobThread stoped, hashCode:{}", Thread.currentThread());
}
4）3：客户端回调服务端
当服务端调用客户端执行后，会直接返回
com.xxl.job.core.biz.impl.ExecutorBizImpl#run
public ReturnT<String> pushTriggerQueue(TriggerParam triggerParam) {
// avoid repeat 若包含，则说明重复执行
if (triggerLogIdSet.contains(triggerParam.getLogId())) {
logger.info(">>>>>>>>>>> repeate trigger job, logId:{}", triggerParam.getLogId());
return new ReturnT<String>(ReturnT.FAIL_CODE, "repeate trigger job, logId:" + triggerParam.getLogId());
}
triggerLogIdSet.add(triggerParam.getLogId());
triggerQueue.add(triggerParam);
return ReturnT.SUCCESS;
}
服务端接收响应
随后封装成这样返回
这里xxl_job_log表trigger_code，200标识调用客户端成功,500标识调用失败(获取不到客户端地址)
当客户端执行完成后，会将处理回调参数任务加入触发器回调处理线程
com.xxl.job.core.thread.JobThread#run
com.xxl.job.core.thread.TriggerCallbackThread#start
调用服务端回调
private void doCallback(List<HandleCallbackParam> callbackParamList){
boolean callbackRet = false;
// callback, will retry if error 获取admin地址
for (AdminBiz adminBiz: XxlJobExecutor.getAdminBizList()) {
try { //回调admin,返回执行结果
ReturnT<String> callbackResult = adminBiz.callback(callbackParamList);
if (callbackResult!=null && ReturnT.SUCCESS_CODE == callbackResult.getCode()) {
callbackLog(callbackParamList, "<br>----------- xxl-job job callback finish.");
callbackRet = true;
break;
} else {
callbackLog(callbackParamList, "<br>----------- xxl-job job callback fail, callbackResult:" + callbackResult);
}
} catch (Exception e) {
callbackLog(callbackParamList, "<br>----------- xxl-job job callback error, errorMsg:" + e.getMessage());
}
}
if (!callbackRet) {
appendFailCallbackFile(callbackParamList);
}
}
public ReturnT<String> callback(List<HandleCallbackParam> callbackParamList) {
return XxlJobRemotingUtil.postBody(addressUrl+"api/callback", accessToken, timeout, callbackParamList, String.class);
}
com.xxl.job.admin.controller.JobApiController#api
public ReturnT<String> callback(List<HandleCallbackParam> callbackParamList) {
callbackThreadPool.execute(new Runnable() {
@Override
public void run() {
for (HandleCallbackParam handleCallbackParam: callbackParamList) {
ReturnT<String> callbackResult = callback(handleCallbackParam);
logger.debug(">>>>>>>>> JobApiController.callback {}, handleCallbackParam={}, callbackResult={}",
(callbackResult.getCode()== ReturnT.SUCCESS_CODE?"success":"fail"), handleCallbackParam, callbackResult);
}
}
});
return ReturnT.SUCCESS;
}
private ReturnT<String> callback(HandleCallbackParam handleCallbackParam) {
// valid log item 加载log
XxlJobLog log = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().load(handleCallbackParam.getLogId());
if (log == null) { //日志没找到返回异常
return new ReturnT<String>(ReturnT.FAIL_CODE, "log item not found.");
}
if (log.getHandleCode() > 0) { //说明重复执行
return new ReturnT<String>(ReturnT.FAIL_CODE, "log repeate callback."); // avoid repeat callback, trigger child job etc
}
// handle msg
StringBuffer handleMsg = new StringBuffer();
if (log.getHandleMsg()!=null) {
handleMsg.append(log.getHandleMsg()).append("<br>");
}
if (handleCallbackParam.getHandleMsg() != null) {
handleMsg.append(handleCallbackParam.getHandleMsg());
}
// success, save log 更改
log.setHandleTime(new Date());
log.setHandleCode(handleCallbackParam.getHandleCode()); //更改处理状态,200正常,500错误
log.setHandleMsg(handleMsg.toString());
XxlJobCompleter.updateHandleInfoAndFinish(log);
return ReturnT.SUCCESS;
}
4）3) 1：执行子任务
public static int updateHandleInfoAndFinish(XxlJobLog xxlJobLog) {
// finish 若父任务正常结束，则终止子任务,以及设置Childmsg
finishJob(xxlJobLog);
// text最大64kb 避免长度过长 截断超过长度限制字符
if (xxlJobLog.getHandleMsg().length() > 15000) {
xxlJobLog.setHandleMsg( xxlJobLog.getHandleMsg().substring(0, 15000) );
}
// fresh handle 更新joblog
return XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().updateHandleInfo(xxlJobLog);
}
private static void finishJob(XxlJobLog xxlJobLog){
// 1、handle success, to trigger child job
String triggerChildMsg = null;
if (XxlJobContext.HANDLE_COCE_SUCCESS == xxlJobLog.getHandleCode()) {
XxlJobInfo xxlJobInfo = XxlJobAdminConfig.getAdminConfig().getXxlJobInfoDao().loadById(xxlJobLog.getJobId());
if (xxlJobInfo!=null && xxlJobInfo.getChildJobId()!=null && xxlJobInfo.getChildJobId().trim().length()>0) {
triggerChildMsg = "<br><br><span style=\"color:#00c0ef;\" > >>>>>>>>>>>"+ I18nUtil.getString("jobconf_trigger_child_run") +"<<<<<<<<<<< </span><br>";
//获取子任务id
String[] childJobIds = xxlJobInfo.getChildJobId().split(",");
for (int i = 0; i < childJobIds.length; i++) {
int childJobId = (childJobIds[i]!=null && childJobIds[i].trim().length()>0 && isNumeric(childJobIds[i]))?Integer.valueOf(childJobIds[i]):-1;
if (childJobId > 0) {
//触发子任务
JobTriggerPoolHelper.trigger(childJobId, TriggerTypeEnum.PARENT, -1, null, null, null);
ReturnT<String> triggerChildResult = ReturnT.SUCCESS;
// add msg
triggerChildMsg += MessageFormat.format(I18nUtil.getString("jobconf_callback_child_msg1"),
(i+1),
childJobIds.length,
childJobIds[i],
(triggerChildResult.getCode()==ReturnT.SUCCESS_CODE?I18nUtil.getString("system_success"):I18nUtil.getString("system_fail")),
triggerChildResult.getMsg());
} else {
triggerChildMsg += MessageFormat.format(I18nUtil.getString("jobconf_callback_child_msg2"),
(i+1),
childJobIds.length,
childJobIds[i]);
}
}
}
}
if (triggerChildMsg != null) {
xxlJobLog.setHandleMsg( xxlJobLog.getHandleMsg() + triggerChildMsg );
}
// 2、fix_delay trigger next
// on the way
}
4）3) 2：针对超时任务设置返回值
com.xxl.job.admin.core.thread.JobCompleteHelper#start
// for monitor
monitorThread = new Thread(new Runnable() {
@Override
public void run() {
// wait for JobTriggerPoolHelper-init
try {
TimeUnit.MILLISECONDS.sleep(50);
} catch (InterruptedException e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
// monitor
while (!toStop) {
try {
// 任务结果丢失处理：调度记录停留在 "运行中" 状态超过10min，且对应执行器心跳注册失败不在线，则将本地调度主动标记失败；
Date losedTime = DateUtil.addMinutes(new Date(), -10);
//调度日志表： 用于保存XXL-JOB任务调度的历史信息，如调度结果、执行结果、调度入参、调度机器和执行器等等；
List<Long> losedJobIds = XxlJobAdminConfig.getAdminConfig().getXxlJobLogDao().findLostJobIds(losedTime);
if (losedJobIds!=null && losedJobIds.size()>0) {
for (Long logId: losedJobIds) {
XxlJobLog jobLog = new XxlJobLog();
jobLog.setId(logId);
jobLog.setHandleTime(new Date());
jobLog.setHandleCode(ReturnT.FAIL_CODE);
jobLog.setHandleMsg( I18nUtil.getString("joblog_lost_fail") );
//更改处理状态
XxlJobCompleter.updateHandleInfoAndFinish(jobLog);
}
}
} catch (Exception e) {
if (!toStop) {
logger.error(">>>>>>>>>>> xxl-job, job fail monitor thread error:{}", e);
}
}
try {
TimeUnit.SECONDS.sleep(60);
} catch (Exception e) {
if (!toStop) {
logger.error(e.getMessage(), e);
}
}
}
logger.info(">>>>>>>>>>> xxl-job, JobLosedMonitorHelper stop");
}
});
monitorThread.setDaemon(true);
monitorThread.setName("xxl-job, admin JobLosedMonitorHelper");
monitorThread.start();
- 被动触发 todo
============
时间轮机制
-
设计模式
======= -
1：策略模式
com.xxl.job.admin.core.trigger.XxlJobTrigger#processTrigger
路由策略：当执行器集群部署时，提供丰富的路由策略，包括；
FIRST（第一个）：固定选择第一个机器；
LAST（最后一个）：固定选择最后一个机器；
ROUND（轮询）：；
RANDOM（随机）：随机选择在线的机器；
CONSISTENT_HASH（一致性HASH）：每个任务按照Hash算法固定选择某一台机器，且所有任务均匀散列在不同机器上。
LEAST_FREQUENTLY_USED（最不经常使用）：使用频率最低的机器优先被选举；
LEAST_RECENTLY_USED（最近最久未使用）：最久未使用的机器优先被选举；
FAILOVER（故障转移）：按照顺序依次进行心跳检测，第一个心跳检测成功的机器选定为目标执行器并发起调度；
BUSYOVER（忙碌转移）：按照顺序依次进行空闲检测，第一个空闲检测成功的机器选定为目标执行器并发起调度；
SHARDING_BROADCAST(分片广播)：广播触发对应集群中所有机器执行一次任务，同时系统自动传递分片参数；可根据分片参数开发分片任务；
public class ExecutorRouteFirst extends ExecutorRouter {
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList){
return new ReturnT<String>(addressList.get(0));
}
}
- 2：单例
private static TriggerCallbackThread instance = new TriggerCallbackThread();
public static TriggerCallbackThread getInstance(){
return instance;
}
-
亮瞎眼的设计
========= -
1：路由策略
路由策略：当执行器集群部署时，提供丰富的路由策略，包括；
FIRST（第一个）：固定选择第一个机器；
LAST（最后一个）：固定选择最后一个机器；
ROUND（轮询）：；
RANDOM（随机）：随机选择在线的机器；
CONSISTENT_HASH（一致性HASH）：每个任务按照Hash算法固定选择某一台机器，且所有任务均匀散列在不同机器上。
LEAST_FREQUENTLY_USED（最不经常使用）：使用频率最低的机器优先被选举；
LEAST_RECENTLY_USED（最近最久未使用）：最久未使用的机器优先被选举；
FAILOVER（故障转移）：按照顺序依次进行心跳检测，第一个心跳检测成功的机器选定为目标执行器并发起调度；
BUSYOVER（忙碌转移）：按照顺序依次进行空闲检测，第一个空闲检测成功的机器选定为目标执行器并发起调度；
SHARDING_BROADCAST(分片广播)：广播触发对应集群中所有机器执行一次任务，同时系统自动传递分片参数；可根据分片参数开发分片任务；
- 子任务：每个任务都拥有一个唯一的任务ID(任务ID可以从任务列表获取)，当本任务执行结束并且执行成功时，将会触发子任务ID所对应的任务的一次主动调度。
public enum ExecutorRouteStrategyEnum {
FIRST(I18nUtil.getString("jobconf_route_first"), new ExecutorRouteFirst()), //（第一个）固定选择第一个机器
LAST(I18nUtil.getString("jobconf_route_last"), new ExecutorRouteLast()), //（最后一个）固定选择最后一个机器
ROUND(I18nUtil.getString("jobconf_route_round"), new ExecutorRouteRound()), //（轮询）轮询
RANDOM(I18nUtil.getString("jobconf_route_random"), new ExecutorRouteRandom()), //（随机）随机选择在线的机器；
CONSISTENT_HASH(I18nUtil.getString("jobconf_route_consistenthash"), new ExecutorRouteConsistentHash()), //（一致性HASH）每个任务按照Hash算法固定选择某一台机器，且所有任务均匀散列在不同机器上。
LEAST_FREQUENTLY_USED(I18nUtil.getString("jobconf_route_lfu"), new ExecutorRouteLFU()), //（最不经常使用）使用频率最低的机器优先被选举；
LEAST_RECENTLY_USED(I18nUtil.getString("jobconf_route_lru"), new ExecutorRouteLRU()), //（最近最久未使用）最久未使用的机器优先被选举；
FAILOVER(I18nUtil.getString("jobconf_route_failover"), new ExecutorRouteFailover()), //（故障转移）按照顺序依次进行心跳检测，第一个心跳检测成功的机器选定为目标执行器并发起调度；
BUSYOVER(I18nUtil.getString("jobconf_route_busyover"), new ExecutorRouteBusyover()), //（忙碌转移）按照顺序依次进行空闲检测，第一个空闲检测成功的机器选定为目标执行器并发起调度；
SHARDING_BROADCAST(I18nUtil.getString("jobconf_route_shard"), null); //(分片广播)广播触发对应集群中所有机器执行一次任务，同时系统自动传递分片参数；可根据分片参数开发分片任务；
}
7) 1）1： FIRST & LAST
public class ExecutorRouteFirst extends ExecutorRouter {
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList){
return new ReturnT<String>(addressList.get(0));
}
}
public class ExecutorRouteLast extends ExecutorRouter {
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
return new ReturnT<String>(addressList.get(addressList.size()-1));
}
}
7) 1）2： 轮询 & 随机
public class ExecutorRouteRound extends ExecutorRouter {
private static ConcurrentMap<Integer, AtomicInteger> routeCountEachJob = new ConcurrentHashMap<>();
private static long CACHE_VALID_TIME = 0;
private static int count(int jobId) {
// cache clear
//当超过缓存时间，则清除缓存,这里存储内存中
if (System.currentTimeMillis() > CACHE_VALID_TIME) {
routeCountEachJob.clear();
//缓存有效时间一天
CACHE_VALID_TIME = System.currentTimeMillis() + 1000*60*60*24;
}
AtomicInteger count = routeCountEachJob.get(jobId);
if (count == null || count.get() > 1000000) {
// 初始化时主动Random一次，缓解首次压力
// 将首次寻址分担到每个addressList上
count = new AtomicInteger(new Random().nextInt(100));
} else {
// count++
count.addAndGet(1);
}
routeCountEachJob.put(jobId, count);
return count.get();
}
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
String address = addressList.get(count(triggerParam.getJobId())%addressList.size());
return new ReturnT<String>(address);
}
}
public class ExecutorRouteRandom extends ExecutorRouter {
private static Random localRandom = new Random();
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
String address = addressList.get(localRandom.nextInt(addressList.size()));
return new ReturnT<String>(address);
}
}
7) 1）3： 一致性HASH
每个任务按照Hash算法固定选择某一台机器，且所有任务均匀散列在不同机器上。
7) 1）4： LFU & LRU
/**
* 单个JOB对应的每个执行器，使用频率最低的优先被选举
* a(*)、LFU(Least Frequently Used)：最不经常使用，频率/次数
* b、LRU(Least Recently Used)：最近最久未使用，时间
*
* Created by xuxueli on 17/3/10.
*/
public class ExecutorRouteLFU extends ExecutorRouter {
private static ConcurrentMap<Integer, HashMap<String, Integer>> jobLfuMap = new ConcurrentHashMap<Integer, HashMap<String, Integer>>();
private static long CACHE_VALID_TIME = 0;
public String route(int jobId, List<String> addressList) {
// cache clear 超过一天，则清除缓存
if (System.currentTimeMillis() > CACHE_VALID_TIME) {
jobLfuMap.clear();
CACHE_VALID_TIME = System.currentTimeMillis() + 1000*60*60*24;
}
// lfu item init
// Key排序可以用TreeMap+构造入参Compare；Value排序暂时只能通过ArrayList；
HashMap<String, Integer> lfuItemMap = jobLfuMap.get(jobId);
if (lfuItemMap == null) {
//说明第一次进来,则新建
lfuItemMap = new HashMap<String, Integer>();
// 避免重复覆盖
jobLfuMap.putIfAbsent(jobId, lfuItemMap);
}
// put new
//存储新的地址,同时随机设置访问次数,缓解第一次访问第一个元素的压力
for (String address: addressList) {
if (!lfuItemMap.containsKey(address) || lfuItemMap.get(address) >1000000 ) {
// 初始化时主动Random一次，缓解首次压力
lfuItemMap.put(address, new Random().nextInt(addressList.size()));
}
}
// remove old
//删除不存在的address
List<String> delKeys = new ArrayList<>();
for (String existKey: lfuItemMap.keySet()) {
if (!addressList.contains(existKey)) {
delKeys.add(existKey);
}
}
if (delKeys.size() > 0) {
for (String delKey: delKeys) {
lfuItemMap.remove(delKey);
}
}
// load least userd count address
//排序次数,降序排序
List<Map.Entry<String, Integer>> lfuItemList = new ArrayList<Map.Entry<String, Integer>>(lfuItemMap.entrySet());
Collections.sort(lfuItemList, new Comparator<Map.Entry<String, Integer>>() {
@Override
public int compare(Map.Entry<String, Integer> o1, Map.Entry<String, Integer> o2) {
return o1.getValue().compareTo(o2.getValue());
}
});
//获取最少访问次数的元素
Map.Entry<String, Integer> addressItem = lfuItemList.get(0);
String minAddress = addressItem.getKey();
//访问次数+1
addressItem.setValue(addressItem.getValue() + 1);
return addressItem.getKey();
}
@Override
public ReturnT<String> route(TriggerParam triggerParam, List<String> addressList) {
String address = route(triggerParam.getJobId(), addressList);
return new ReturnT<String>(address);
}
}
package com.xxl.job.admin.core.route.strategy;
import com.xxl.job.admin.core.route.ExecutorRouter;
import com.xxl.job.core.biz.model.ReturnT;
import com.xxl.job.core.biz.model.TriggerParam;
import java.util.ArrayList;
import java.util.LinkedHashMap;
import java.util.List;
import java.util.concurrent.ConcurrentHashMap;
import java.util.concurrent.ConcurrentMap;
/**
* 单个JOB对应的每个执行器，最久为使用的优先被选举
* a、LFU(Least Frequently Used)：最不经常使用，频率/次数
* b(*)、LRU(Least Recently Used)：最近最久未使用，时间
3187
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
