1、环境介绍及准备:
1.1 物理机操作系统
物理机操作系统采用Centos7.3 64位,细节如下。
[root@localhost ~]# uname -a
Linux localhost.localdomain 3.10.0-514.6.1.el7.x86_64 #1 SMP Wed Jan 18 13:06:36 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
[root@localhost ~]# cat /etc/redhat-release
CentOS Linux release 7.3.1611 (Core)
1.2 主机信息
本文准备了三台机器用于部署k8s的运行环境,细节如下:
节点及功能 | 主机名 | IP |
Master、etcd、registry | K8s-master | 10.0.251.148 |
Node1 | K8s-node-1 | 10.0.251.153 |
Node2 | K8s-node-2 | 10.0.251.155 |
设置三台机器的主机名:
Master上执行:
[root@localhost ~]# hostnamectl --static set-hostname k8s-master
Node1上执行:
[root@localhost ~]# hostnamectl --static set-hostname k8s-node-1
Node2上执行:
[root@localhost ~]# hostnamectl --static set-hostname k8s-node-2
在三台机器上设置hosts,均执行如下命令:
echo '10.0.251.148 k8s-master
10.0.251.148 etcd
10.0.251.148 registry
10.0.251.153 k8s-node-1
10.0.251.155 k8s-node-2' >> /etc/hosts
1.3 关闭三台机器上的防火墙
systemctl disable firewalld.service
systemctl stop firewalld.service
2、部署etcd
k8s运行依赖etcd,需要先部署etcd,本文采用yum方式安装:
[root@localhost ~]# yum install etcd -y
yum安装的etcd默认配置文件在/etc/etcd/etcd.conf。编辑配置文件,更改以下带颜色部分信息:
[root@localhost ~]# vi /etc/etcd/etcd.conf
# [member]
ETCD_NAME=master
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_WAL_DIR=""
#ETCD_SNAPSHOT_COUNT="10000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
#ETCD_LISTEN_PEER_URLS="http://0.0.0.0:2380"
ETCD_LISTEN_CLIENT_URLS="http://0.0.0.0:2379,http://0.0.0.0:4001"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
#ETCD_CORS=""
#
#[cluster]
#ETCD_INITIAL_ADVERTISE_PEER_URLS="http://localhost:2380"
# if you use different ETCD_NAME (e.g. test), set ETCD_INITIAL_CLUSTER value for this name, i.e. "test=http://..."
#ETCD_INITIAL_CLUSTER="default=http://localhost:2380"
#ETCD_INITIAL_CLUSTER_STATE="new"
#ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="http://etcd:2379,http://etcd:4001"
#ETCD_DISCOVERY=""
#ETCD_DISCOVERY_SRV=""
#ETCD_DISCOVERY_FALLBACK="proxy"
#ETCD_DISCOVERY_PROXY=""
启动并验证状态
[root@localhost ~]# systemctl start etcd
[root@localhost ~]# systemctl enable etcd
[root@localhost ~]# etcdctl set testdir/testkey0 0 0 [root@localhost ~]# etcdctl get testdir/testkey0 0 [root@localhost ~]# etcdctl -C http://etcd:4001 cluster-health member 8e9e05c52164694d is healthy: got healthy result from http://0.0.0.0:2379 cluster is healthy [root@localhost ~]# etcdctl -C http://etcd:2379 cluster-health member 8e9e05c52164694d is healthy: got healthy result from http://0.0.0.0:2379 cluster is healthy
扩展:Etcd集群部署参见——http://www.cnblogs.com/zhenyuyaodidiao/p/6237019.html
3、部署master
3.1 安装Docker
[root@k8s-master ~]# yum install docker
配置Docker配置文件,使其允许从registry中拉取镜像。
[root@k8s-master ~]# vim /etc/sysconfig/docker
# /etc/sysconfig/docker
# Modify these options if you want to change the way the docker daemon runs
OPTIONS='--selinux-enabled --log-driver=journald --signature-verification=false'
if [ -z "${DOCKER_CERT_PATH}" ]; then
DOCKER_CERT_PATH=/etc/docker
fi
OPTIONS='--insecure-registry registry:5000'
设置开机自启动并开启服务
[root@k8s-master ~]# chkconfig docker on
[root@k8s-master ~]# service docker start
3.2 安装kubernets
[root@k8s-master ~]# yum install kubernetes
3.3 配置并启动kubernetes
在kubernetes master上需要运行以下组件:
Kubernets API Server
Kubernets Controller Manager
Kubernets Scheduler
相应的要更改以下几个配置中带颜色部分信息:
3.3.1 /etc/kubernetes/apiserver
[root@k8s-master ~]# vim /etc/kubernetes/apiserver
###
# kubernetes system config
#
# The following values are used to configure the kube-apiserver
#
# The address on the local server to listen to.
KUBE_API_ADDRESS="--insecure-bind-address=0.0.0.0"
# The port on the local server to listen on.
KUBE_API_PORT="--port=8080"
# Port minions listen on
# KUBELET_PORT="--kubelet-port=10250"
# Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd-servers=http://etcd:2379"
# Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"
# default admission control policies
#KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota"
KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ResourceQuota"
# Add your own!
KUBE_API_ARGS=""
3.3.2 /etc/kubernetes/config
[root@k8s-master ~]# vim /etc/kubernetes/config
###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
# kube-apiserver.service
# kube-controller-manager.service
# kube-scheduler.service
# kubelet.service
# kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"
# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"
# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"
# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://k8s-master:8080"
启动服务并设置开机自启动
[root@k8s-master ~]# systemctl enable kube-apiserver.service
[root@k8s-master ~]# systemctl start kube-apiserver.service
[root@k8s-master ~]# systemctl enable kube-controller-manager.service
[root@k8s-master ~]# systemctl start kube-controller-manager.service
[root@k8s-master ~]# systemctl enable kube-scheduler.service
[root@k8s-master ~]# systemctl start kube-scheduler.service
4、部署node
4.1 安装docker
参见3.1
4.2 安装kubernets
参见3.2
4.3 配置并启动kubernetes
在kubernetes node上需要运行以下组件:
Kubelet
Kubernets Proxy
相应的要更改以下几个配置文中带颜色部分信息:
4.3.1 /etc/kubernetes/config
[root@K8s-node-1 ~]# vim /etc/kubernetes/config
###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
# kube-apiserver.service
# kube-controller-manager.service
# kube-scheduler.service
# kubelet.service
# kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"
# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"
# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"
# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://k8s-master:8080"
4.3.2 /etc/kubernetes/kubelet
[root@K8s-node-1 ~]# vim /etc/kubernetes/kubelet
###
# kubernetes kubelet (minion) config
# The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=0.0.0.0"
# The port for the info server to serve on
# KUBELET_PORT="--port=10250"
# You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=k8s-node-1"
# location of the api-server
KUBELET_API_SERVER="--api-servers=http://k8s-master:8080"
# pod infrastructure container
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest"
# Add your own!
KUBELET_ARGS=""
启动服务并设置开机自启动
[root@k8s-master ~]# systemctl enable kubelet.service
[root@k8s-master ~]# systemctl start kubelet.service
[root@k8s-master ~]# systemctl enable kube-proxy.service
[root@k8s-master ~]# systemctl start kube-proxy.service
4.4 查看状态
在master上查看集群中节点及节点状态
[root@k8s-master ~]# kubectl -s http://k8s-master:8080 get node
NAME STATUS AGE
k8s-node-1 Ready 3m
k8s-node-2 Ready 16s
[root@k8s-master ~]# kubectl get nodes
NAME STATUS AGE
k8s-node-1 Ready 3m
k8s-node-2 Ready 43s
至此,已经搭建了一个kubernetes集群,但目前该集群还不能很好的工作,请继续后续的步骤。
5、创建覆盖网络——Flannel
5.1 安装Flannel
在master、node上均执行如下命令,进行安装
[root@k8s-master ~]# yum install flannel
版本为0.0.5
5.2 配置Flannel
master、node上均编辑/etc/sysconfig/flanneld,修改红色部分
[root@k8s-master ~]# vi /etc/sysconfig/flanneld
# Flanneld configuration options
# etcd url location. Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="http://etcd:2379"
# etcd config key. This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/atomic.io/network"
# Any additional options that you want to pass
#FLANNEL_OPTIONS=""
5.3 配置etcd中关于flannel的key
Flannel使用Etcd进行配置,来保证多个Flannel实例之间的配置一致性,所以需要在etcd上进行如下配置:(‘/atomic.io/network/config’这个key与上文/etc/sysconfig/flannel中的配置项FLANNEL_ETCD_PREFIX是相对应的,错误的话启动就会出错)
[root@k8s-master ~]# etcdctl mk /atomic.io/network/config '{ "Network": "10.0.0.0/16" }'
{ "Network": "10.0.0.0/16" }
5.4 启动
启动Flannel之后,需要依次重启docker、kubernete。
在master执行:
systemctl enable flanneld.service
systemctl start flanneld.service
service docker restart
systemctl restart kube-apiserver.service
systemctl restart kube-controller-manager.service
systemctl restart kube-scheduler.service
在node上执行:
systemctl enable flanneld.service
systemctl start flanneld.service
service docker restart
systemctl restart kubelet.service
systemctl restart kube-proxy.service