安装kafka_2.13-2.5.0

最新推荐文章于 2024-07-29 14:21:11 发布

有瘾~

最新推荐文章于 2024-07-29 14:21:11 发布

阅读量1.3k

点赞数

分类专栏：安装部署文章标签： kafka

本文链接：https://blog.csdn.net/qq_40852251/article/details/106075182

版权

安装部署专栏收录该内容

5 篇文章 1 订阅

订阅专栏

安装kafka-2.5.0

安装环境介绍

c8-1 10.1.1.100 centos8.1
c8-2 10.1.1.101 centos8.1
c8-3 10.1.1.102 centos8.1
zookeeper已经安装好了，版本apache-zookeeper-3.6.0-bin.tar.gz
jdk版本 —jdk1.8.0_241

安装包下载链接：kafka_2.13-2.5.0
下载完之后就准备rz上传安装包

开始安装

#解压上传的kafka安装包
[root@c8-1 opt]# tar xf kafka_2.13-2.5.0.tgz
[root@c8-1 opt]# ll
total 0
drwxrwxr-x. 7 root root 245 Dec 11 05:39 jdk1.8.0_241
drwxr-xr-x. 6 root root  89 Apr  7 21:18 kafka_2.13-2.5.0
drwxr-xr-x. 9 root root 168 May 13 00:35 zookeeper

#配置JAVA环境并修改目录权限
[root@c8-1 opt]# vim /root/.bash_profile
[root@c8-1 opt]# cat /root/.bash_profile
# .bash_profile

# Get the aliases and functions
if [ -f ~/.bashrc ]; then
	. ~/.bashrc
fi

# User specific environment and startup programs

PATH=$PATH:$HOME/bin:$JAVA_HOME/bin:
export JAVA_HOME=/opt/jdk1.8.0_241
export PATH
[root@c8-1 opt]#
[root@c8-1 opt]# source /root/.bash_profile
[root@c8-1 opt]# jps
4963 Jps
4648 QuorumPeerMain
[root@c8-1 opt]# scp /root/.bash_profile root@c8-2:/root/
.bash_profile                                                          100%  226   268.2KB/s   00:00
[root@c8-2 bin]# source /root/.bash_profile
[root@c8-2 bin]# jps
4288 Jps
4002 QuorumPeerMain
[root@c8-1 opt]# scp /root/.bash_profile root@c8-3:/root/
.bash_profile                                                          100%  226    86.3KB/s   00:00
[root@c8-3 bin]# source /root/.bash_profile
[root@c8-3 bin]# jps
4196 QuorumPeerMain
4461 Jps
[root@c8-1 opt]# chmod -R  775 /opt/kafka_2.13-2.5.0/bin/ *

#修改配置文件并scp给其他主机
[root@c8-1 opt]# ls
jdk1.8.0_241   kafka_2.13-2.5.0  zookeeper
[root@c8-1 opt]# cd kafka_2.13-2.5.0/
[root@c8-1 kafka_2.13-2.5.0]# ll
total 56
drwxr-xr-x. 3 root root  4096 Apr  7 21:18 bin
drwxr-xr-x. 2 root root  4096 Apr  7 21:18 config
drwxr-xr-x. 2 root root  8192 May 13 00:39 libs
-rw-r--r--. 1 root root 32216 Apr  7 21:13 LICENSE
-rw-r--r--. 1 root root   337 Apr  7 21:13 NOTICE
drwxr-xr-x. 2 root root    44 Apr  7 21:18 site-docs
[root@c8-1 kafka_2.13-2.5.0]# cd config/
[root@c8-1 config]# ll
total 72
-rw-r--r--. 1 root root  906 Apr  7 21:13 connect-console-sink.properties
-rw-r--r--. 1 root root  909 Apr  7 21:13 connect-console-source.properties
-rw-r--r--. 1 root root 5321 Apr  7 21:13 connect-distributed.properties
-rw-r--r--. 1 root root  883 Apr  7 21:13 connect-file-sink.properties
-rw-r--r--. 1 root root  881 Apr  7 21:13 connect-file-source.properties
-rw-r--r--. 1 root root 2247 Apr  7 21:13 connect-log4j.properties
-rw-r--r--. 1 root root 2540 Apr  7 21:13 connect-mirror-maker.properties
-rw-r--r--. 1 root root 2262 Apr  7 21:13 connect-standalone.properties
-rw-r--r--. 1 root root 1221 Apr  7 21:13 consumer.properties
-rw-r--r--. 1 root root 4675 Apr  7 21:13 log4j.properties
-rw-r--r--. 1 root root 1925 Apr  7 21:13 producer.properties
-rw-r--r--. 1 root root 6849 Apr  7 21:13 server.properties
-rw-r--r--. 1 root root 1032 Apr  7 21:13 tools-log4j.properties
-rw-r--r--. 1 root root 1169 Apr  7 21:13 trogdor.conf
-rw-r--r--. 1 root root 1205 Apr  7 21:13 zookeeper.properties
[root@c8-1 config]# vim server.properties   ---需要注意broker.id这个编号，按照主机顺序0、1、2.......依次填写。
[root@c8-1 config]# more server.properties
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# see kafka.server.KafkaConfig for additional details and defaults

############################# Server Basics #############################

# The id of the broker. This must be set to a unique integer for each broker.
broker.id=0	

############################# Socket Server Settings #############################

# The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
#   FORMAT:
#     listeners = listener_name://host_name:port
#   EXAMPLE:
#     listeners = PLAINTEXT://your.host.name:9092
#listeners=PLAINTEXT://:9092
host.name=c8-1
port=9092
# Hostname and port the broker will advertise to producers and consumers. If not set,
# it uses the value for "listeners" if configured.  Otherwise, it will use the value
# returned from java.net.InetAddress.getCanonicalHostName().
#advertised.listeners=PLAINTEXT://your.host.name:9092

# Maps listener names to security protocols, the default is for them to be the same. See the config docum
entation for more details
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_S
SL

# The number of threads that the server uses for receiving requests from the network and sending response
s to the network
num.network.threads=2

# The number of threads that the server uses for processing requests, which may include disk I/O
num.io.threads=2

# The send buffer (SO_SNDBUF) used by the socket server
socket.send.buffer.bytes=102400

# The receive buffer (SO_RCVBUF) used by the socket server
socket.receive.buffer.bytes=102400

# The maximum size of a request that the socket server will accept (protection against OOM)
socket.request.max.bytes=104857600


############################# Log Basics #############################

# A comma separated list of directories under which to store log files
log.dirs=/opt/kafka_2.13-2.5.0/log/kafka

# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
num.partitions=4

# The number of threads per data directory to be used for log recovery at startup and flushing at shutdow
n.
# This value is recommended to be increased for installations with data dirs located in RAID array.
num.recovery.threads.per.data.dir=1

############################# Internal Topic Settings  #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_s
tate"
# For anything other than development testing, a value greater than 1 is recommended to ensure availabili
ty such as 3.
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1

############################# Log Flush Policy #############################

# Messages are immediately written to the filesystem but by default we only fsync() to sync
# the OS cache lazily. The following configurations control the flush of data to disk.
# There are a few important trade-offs here:
#    1. Durability: Unflushed data may be lost if you are not using replication.
#    2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there
 will be a lot of data to flush.
#    3. Throughput: The flush is generally the most expensive operation, and a small flush interval may l
ead to excessive seeks.
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.

# The number of messages to accept before forcing a flush of data to disk
#log.flush.interval.messages=10000

# The maximum amount of time a message can sit in a log before we force a flush
#log.flush.interval.ms=1000

############################# Log Retention Policy #############################

# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.

# The minimum age of a log file to be eligible for deletion due to age
log.retention.hours=72

# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
#log.retention.bytes=1073741824

# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=1073741824

# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.retention.check.interval.ms=300000

############################# Zookeeper #############################

# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
zookeeper.connect=c8-1:2181,c8-2:2181,c8-3:2181

# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=18000


############################# Group Coordinator Settings #############################

# The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay t
he initial consumer rebalance.
# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members j
oin the group, up to a maximum of max.poll.interval.ms.
# The default value for this is 3 seconds.
# We override this to 0 here as it makes for a better out-of-the-box experience for development and testi
ng.
# However, in production environments the default value of 3 seconds is more suitable as this will help t
o avoid unnecessary, and potentially expensive, rebalances during application startup.
group.initial.rebalance.delay.ms=0
[root@c8-1 bin]#
[root@c8-1 bin]# more kafka-server-start.sh
#!/bin/bash
export KAFKA_HEAP_OPTS="-Xmx2G -Xms2G"
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

if [ $# -lt 1 ];
then
	echo "USAGE: $0 [-daemon] server.properties [--override property=value]*"
	exit 1
fi
base_dir=$(dirname $0)

if [ "x$KAFKA_LOG4J_OPTS" = "x" ]; then
    export KAFKA_LOG4J_OPTS="-Dlog4j.configuration=file:$base_dir/../config/log4j.propertie
s"
fi

if [ "x$KAFKA_HEAP_OPTS" = "x" ]; then
    export KAFKA_HEAP_OPTS="-Xmx1G -Xms1G"
fi

EXTRA_ARGS=${EXTRA_ARGS-'-name kafkaServer -loggc'}

COMMAND=$1
case $COMMAND in
  -daemon)
    EXTRA_ARGS="-daemon "$EXTRA_ARGS
    shift
    ;;
  *)
    ;;
esac

exec $base_dir/kafka-run-class.sh $EXTRA_ARGS kafka.Kafka "$@"
[root@c8-2 bin]#

[root@c8-1 bin]#scp -r /opt/kafka_2.13-2.5.0 root@c8-2:/opt/	将config文件中的broker.id=0修改为broker.id=1
[root@c8-1 bin]#scp -r /opt/kafka_2.13-2.5.0 root@c8-3:/opt/	将config文件中的broker.id=0修改为broker.id=2

启动kafka进程

[root@c8-1 kafka_2.13-2.5.0]# cd bin/
[root@c8-1 bin]# ./kafka-server-start.sh -daemon /opt/kafka_2.13-2.5.0/config/server.properties
[root@c8-1 bin]# jps
7559 Jps
4648 QuorumPeerMain
7517 Kafka	---启动成功
[root@c8-1 bin]#
[root@c8-2 bin]# ./kafka-server-start.sh -daemon /opt/kafka_2.13-2.5.0/config/server.properties
[root@c8-2 bin]# jps
4002 QuorumPeerMain
6868 Kafka	---启动成功
6885 Jps
[root@c8-3 bin]# ./kafka-server-start.sh -daemon /opt/kafka_2.13-2.5.0/config/server.properties
[root@c8-3 bin]# jps
5824 Jps
5809 Kafka	---启动成功
4196 QuorumPeerMain

先停kafka，再停zookeeper,先启动zookeeper，再启动kafka。
查看日志可以tail -f server.log
##停止kafka
[root@c8-1 bin]# ./kafka-server-stop.sh
[root@c8-1 bin]# jps
7747 Jps
4648 QuorumPeerMain
[root@c8-1 bin]#

备注：安装过于简单，欢迎来交流指点。