原文链接 https://www.cnblogs.com/excellencesy/p/8119694.html
- 进入初始化配置对话:
Continue with configuration dialog? [yes/no]: yes 这一步直接no就可以跳过
- 进入基本管理配置:
Would you like to enter basic management setup? [yes/no]: yes
- 输入路由器的名称:
Enter host name [Router]: r1
- 输入密码(加密显示):
Enter enable secret: 123456
- 输入密码(不加密显示):
Enter enable password: 123
- 输入虚拟终端密码(防止未经授权的用户通过console口以外的口访问路由器):
Enter virtual terminal password: 123
- 是否设置snmp(简单网络管理协议):
Configure SNMP Network Management? [no]:yes
- 输入要设置的接口:
management network from the above interface summary: fastethernet0/0
- 是否为这个端口配置ip:
Configure IP on this interface? [yes]: yes
- 输入ip地址:
IP address for this interface: 192.168.1.1
- 输入网关:
Subnet mask for this interface [255.255.255.0] : 255.255.0.0
[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.
选择2保存设置
Enter your selection [2]: 2
Press RETURN to get started!