Centos 本地源挂载

首先添加开机挂载

写入/etc/fstab文件内

命令如下

[root@rserver ~]# echo "/dev/sr0 /mnt/cdrom iso9660 defaults 0 0 " >> /etc/fstab

重新加载挂载配置

[root@rserver ~]# mount /dev/sr0 /mnt/cdrom

查看是否已挂载

[root@rserver ~]# df -Th
文件系统                类型      容量  已用  可用 已用% 挂载点
devtmpfs                devtmpfs  475M     0  475M    0% /dev
tmpfs                   tmpfs     487M     0  487M    0% /dev/shm
tmpfs                   tmpfs     487M  7.7M  479M    2% /run
tmpfs                   tmpfs     487M     0  487M    0% /sys/fs/cgroup
/dev/mapper/centos-root xfs        17G  1.4G   16G    8% /
/dev/sr0                iso9660   9.5G  9.5G     0  100% /mnt/cdrom
/dev/sda1               xfs      1014M  138M  877M   14% /boot
tmpfs                   tmpfs      98M     0   98M    0% /run/user/0
[root@rserver ~]# 

进入镜像源文件路径，并创建bak文件，将yum移动到bak下

[root@rserver ~]# cd /etc/yum.repos.d/
[root@rserver yum.repos.d]# mkdir bak
[root@rserver yum.repos.d]# mv * bak

移动完成后将CentOS-Media.repo复制到yum目录下

[root@rserver yum.repos.d]# cp ./bak/CentOS-Media.repo ./

然后编辑配置文件

[root@rserver yum.repos.d]# vi CentOS-Media.repo
# CentOS-Media.repo
#
#  This repo can be used with mounted DVD media, verify the mount point for
#  CentOS-7.  You can use this repo and yum to install items directly off the
#  DVD ISO that we release.
#
# To use this repo, put in your DVD and use it with the other repos too:
#  yum --enablerepo=c7-media [command]
#
# or for ONLY the media repo, do this:
#
#  yum --disablerepo=\* --enablerepo=c7-media [command]

[c7-media]
name=CentOS-$releasever - Media
baseurl=file:///mnt/cdrom/ ---将这里改为/mnt/cdrom/
#        file:///media/cdrom/         ----这行注释
#        file:///media/cdrecorder/    ----这行注释
gpgcheck=1
enabled=1 -----这个改为1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
然后保存退出

清理yum源，重新加载

[root@rserver ~]# yum clean all
[root@rserver ~]# yum makecache