2021-09-15

华为CE6820交换机堆叠配置
交换机A配置
system-view
stack #进入堆叠模式
stack member 1 domain 10 #ID默认为1,域为10，,优先级默认100，越大越优
quit
commit #提交
interface stack-port 1/1 #进入堆叠口
port member-group interface 10GE 1/0/47 to 1/0/48 #物理接口加入堆叠口
quit
commit
return
save #保存
配置完成需重启

交换机B配置
system-view
stack
stack member 1 renumber 2 #修改默认ID，修改完须重启才能生效
commit #提交
save
stack member 2 priority 80 #修改优先级
stack member 2 domain 10 #加入域为10
quit
commit
interface stack-port 2/1 #进入堆叠口
port member-group interface 10GE 1/0/47 to 1/0/48 #加入物理接口
quit
commit
reboot #配置完成需要重启生效

华为S12700E，S7706系列堆叠配置
交换机A配置
system-view
[HUAWEI] sysname Switch1
[Switch1] set css id 1
[Switch1] set css priority 150 //框1的集群优先级配置为150
[Switch1] interface css-port 1
[Switch1-css-port1] port interface xgigabitethernet 4/0/1 to xgigabitethernet 4/0/2 enable
[Switch1-css-port1] quit
[Switch1] interface css-port 2
[Switch1-css-port2] port interface xgigabitethernet 5/0/1 to xgigabitethernet 5/0/2 enable
[Switch1-css-port2] quit
[Switch1] display css status saved //查看集群配置是否正确
[Switch1] css enable //集群配置确认正确后，使能集群，重启设备，为保证框ID成为主交换机，先重启Switch1
Warning: The CSS configuration will take effect only after the system is rebooted. The next CSS mode is CSS card. Reboot now? [Y/N]:y
交换机B配置
system-view
[HUAWEI] sysname Switch2
[Switch2] set css id 2 //框2的集群优先级使用缺省值，不需要配置。
[Switch2] interface css-port 1
[Switch2-css-port1] port interface xgigabitethernet 4/0/1 to xgigabitethernet 4/0/2 enable
[Switch2-css-port1] quit
[Switch2] interface css-port 2
[Switch2-css-port2] port interface xgigabitethernet 5/0/1 to xgigabitethernet 5/0/2 enable
[Switch2-css-port2] quit
[Switch2] display css status saved //查看集群配置是否正确
CSS port media-type: SFP+
[Switch2] css enable //集群配置确认正确后，使能集群，重启设备