文章目录
一、获取uC/OS-III源码
链接:https://pan.baidu.com/s/1Btj7foEXdXjjJWoZQsN-OQ
提取码:mleh
二、建立stm32 hal库工程
配置PA5和PA6为GPIO_Output,和配置串口1,
可根据LED现象作为我们是否移植成功的依据。
三、复制uC/OS-III文件到工程文件夹
1.在生成的keil工程文件夹f103c8_uCOSIII_1_test中新建一个 UCOSIII 的文件夹,将我们下载的源代码中三个文件夹: Uc-CPU、 uC-LIB、 Ucos-III 复制到我们新建的文件夹中:
2.在Src文件夹下新建一个OS文件夹
3.将刚才下载源码打开,将路径:\EvalBoards\Micrium\uC-Eval-STM32F107\uCOS-III 下的文件:
app.c 、 app_cfg.h 、 cpu_cfg.h 、 includes.h 、 lib_cfg.h 、 os_app_hooks.c 、os_app_hook.h、os_cfg.h、os_cfg_app.h复制到上一步建立的OS文件夹中,同时新建三个空白文件: bsp.c、bsp.h、app.h
四、添加工程组件和头文件路径
4.1 添加工程分组
打开f103c8_uCOSIII_1_test工程, 按照如图所示添加六个新的组: bsp、uCOSIII_CPU、 uCOSIII_LIB、 uCOSIII_Ports、 uCOSIII_Source、 OS_cfg
4.2 添加文件到分组
文件目录是: Src/OS,将其中 bsp.c 和 bsp.h文件添加至 bsp 组中,将 app.c 添加进 Application/User 组中
uCOSIII_CPU 组件, 点击 Add Files…按钮,将文件目录跳转至: UCOSIII/uC-CPU, 选择 ALL files 文件类型,将其中的三个文件点击 Add 添加, 然后再打开: ARM-Cortex-M3\RealView, 同样选择 ALL files 文件类型,将三个文件添加进 uCOSIII_CPU 组
添加 uCOSIII_LIB 组件文件:选择 uCOSIII_LIB 组,点击 Add Files…按钮, 将文件目录跳转至: UCOSIII/uCLIB,选择 ALL files 文件类型,将其中的九个文件添加进 uCOSIII_LIB 组;然后继续打开: Ports/ARM-Cortex-M3/Realview, 添加 lib_mem_a.asm 文件
选择 uCOSIII_Ports 组,点击 Add Files…按钮, 将文件目录调整至: UCOSIII/UcosIII/Ports/RAM-Cortex-M3/Generic/RealView。选择 ALL files 文件类型, 将其中三个文件添加进 uCOSIII_Ports 组
选择uCOSIII_Sourc组,点击Add Files…按钮, 将文件目录调整至: UCOSIII/UcosIII/Source。选择 ALL files 文件类型, 将其中二十个文件添加进 uCOSIII_Sourc 组。
选择 OS_cfg 组,点击 Add Files…按钮, 将文件目录调整至: Src/OS。选择 ALLfiles 文件类型, 将图中的八个文件添加进 uCOSIII_Sourc 组
4.3添加头文件路径
五、修改文件内容
1 .启动文件
改为下面:
2. app_cfg.h
第一处修改:
修改前:
#define APP_CFG_SERIAL_EN DEF_ENABLED
修改后
#define APP_CFG_SERIAL_EN DEF_DISABLED
第二处修改:
修改前
#define APP_TRACE BSP_Ser_Printf
修改后
#define APP_TRACE (void)
3. includes.h
第一处修改: 添加相关头文件
#include "gpio.h"
#include "app_cfg.h"
#include "app.h"
第二处修改: 添加HAL 库
修改前:
#include <stm32f10x_lib.h>
修改后:
#include "stm32f1xx_hal.h"
4. bsp.c和bsp.h
直接复制下面的代码:
// bsp.c
#include "includes.h"
#define DWT_CR *(CPU_REG32 *)0xE0001000
#define DWT_CYCCNT *(CPU_REG32 *)0xE0001004
#define DEM_CR *(CPU_REG32 *)0xE000EDFC
#define DBGMCU_CR *(CPU_REG32 *)0xE0042004
#define DEM_CR_TRCENA (1 << 24)
#define DWT_CR_CYCCNTENA (1 << 0)
CPU_INT32U BSP_CPU_ClkFreq (void)
{
return HAL_RCC_GetHCLKFreq();
}
void BSP_Tick_Init(void)
{
CPU_INT32U cpu_clk_freq;
CPU_INT32U cnts;
cpu_clk_freq = BSP_CPU_ClkFreq();
#if(OS_VERSION>=3000u)
cnts = cpu_clk_freq/(CPU_INT32U)OSCfg_TickRate_Hz;
#else
cnts = cpu_clk_freq/(CPU_INT32U)OS_TICKS_PER_SEC;
#endif
OS_CPU_SysTickInit(cnts);
}
void BSP_Init(void)
{
BSP_Tick_Init();
MX_GPIO_Init();
}
#if (CPU_CFG_TS_TMR_EN == DEF_ENABLED)
void CPU_TS_TmrInit (void)
{
CPU_INT32U cpu_clk_freq_hz;
DEM_CR |= (CPU_INT32U)DEM_CR_TRCENA; /* Enable Cortex-M3's DWT CYCCNT reg. */
DWT_CYCCNT = (CPU_INT32U)0u;
DWT_CR |= (CPU_INT32U)DWT_CR_CYCCNTENA;
cpu_clk_freq_hz = BSP_CPU_ClkFreq();
CPU_TS_TmrFreqSet(cpu_clk_freq_hz);
}
#endif
#if (CPU_CFG_TS_TMR_EN == DEF_ENABLED)
CPU_TS_TMR CPU_TS_TmrRd (void)
{
return ((CPU_TS_TMR)DWT_CYCCNT);
}
#endif
#if (CPU_CFG_TS_32_EN == DEF_ENABLED)
CPU_INT64U CPU_TS32_to_uSec (CPU_TS32 ts_cnts)
{
CPU_INT64U ts_us;
CPU_INT64U fclk_freq;
fclk_freq = BSP_CPU_ClkFreq();
ts_us = ts_cnts / (fclk_freq / DEF_TIME_NBR_uS_PER_SEC);
return (ts_us);
}
#endif
#if (CPU_CFG_TS_64_EN == DEF_ENABLED)
CPU_INT64U CPU_TS64_to_uSec (CPU_TS64 ts_cnts)
{
CPU_INT64U ts_us;
CPU_INT64U fclk_freq;
fclk_freq = BSP_CPU_ClkFreq();
ts_us = ts_cnts / (fclk_freq / DEF_TIME_NBR_uS_PER_SEC);
return (ts_us);
}
#endif
// bsp.h
#ifndef __BSP_H__
#define __BSP_H__
#include "stm32f1xx_hal.h"
void BSP_Init(void);
#endif
5. app.c和app.h
// app.c
#include <includes.h>
// app.h
#ifndef __APP_H__
#define __APP_H__
#include <includes.h>
#endif /* __APP_H__ */
6. lib_cfg.h
这里需要将堆空间改小一点,我改成了5K
#define LIB_MEM_CFG_HEAP_SIZE 5u * 1024u
7.配置
8. main.c
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "gpio.h"
#include "usart.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include <includes.h>
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */
/* USER CODE END PTD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* 任务优先级 */
#define Led1_TASK_PRIO 3
#define Led2_TASK_PRIO 4
#define MSG_TASK_PRIO 5
/* 任务堆栈大小 */
#define Led1_STK_SIZE 64
#define Led2_STK_SIZE 64
#define MSG_STK_SIZE 64//任务堆大小过大会报错,可以试着改小一点
//任务控制块
static OS_TCB AppTaskStartTCB;
static OS_TCB Led1TaskTCB;
static OS_TCB Led2TaskTCB;
static OS_TCB MsgTaskTCB;
//任务堆栈
static CPU_STK AppTaskStartStk[APP_TASK_START_STK_SIZE];
static CPU_STK Led1_TASK_STK[Led1_STK_SIZE];
static CPU_STK Led2_TASK_STK[Led2_STK_SIZE];
static CPU_STK MSG_TASK_STK[MSG_STK_SIZE];
/* 私有函数原形 --------------------------------------------------------------*/
static void AppTaskCreate(void);
static void AppObjCreate(void);
static void AppTaskStart(void *p_arg);
static void Led1(void *p_arg);
static void Led2(void *p_arg);
static void send_msg(void *p_arg);
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
{
Error_Handler();
}
}
/* USER CODE END 0 */
/**
* @brief The application entry point.
* @retval int
*/
int main(void)
{
/* USER CODE BEGIN 1 */
OS_ERR err;
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
// HAL_Init();
/* USER CODE BEGIN Init */
/* USER CODE END Init */
/* Configure the system clock */
// SystemClock_Config();
/* USER CODE BEGIN SysInit */
OSInit(&err);
/* USER CODE END SysInit */
/* Initialize all configured peripherals */
// MX_GPIO_Init();
/* USER CODE BEGIN 2 */
MX_USART1_UART_Init();
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
/* 创建任务 */
OSTaskCreate((OS_TCB *)&AppTaskStartTCB, /* Create the start task */
(CPU_CHAR *)"App Task Start",
(OS_TASK_PTR ) AppTaskStart,
(void *) 0,
(OS_PRIO ) APP_TASK_START_PRIO,
(CPU_STK *)&AppTaskStartStk[0],
(CPU_STK_SIZE) APP_TASK_START_STK_SIZE / 10,
(CPU_STK_SIZE) APP_TASK_START_STK_SIZE,
(OS_MSG_QTY ) 0,
(OS_TICK ) 0,
(void *) 0,
(OS_OPT )(OS_OPT_TASK_STK_CHK | OS_OPT_TASK_STK_CLR),
(OS_ERR *)&err);
/* 启动多任务系统,控制权交给uC/OS-III */
OSStart(&err); /* Start multitasking (i.e. give control to uC/OS-III). */
}
/**
* 函数功能: 启动任务函数体。
* 输入参数: p_arg 是在创建该任务时传递的形参
* 返 回 值: 无
* 说 明:无
*/
static void AppTaskStart (void *p_arg)
{
OS_ERR err;
CPU_SR_ALLOC();
p_arg = p_arg;
/* YangJie add 2021.05.20*/
BSP_Init(); /* Initialize BSP functions */
//CPU_Init();
//Mem_Init(); /* Initialize Memory Management Module */
#if OS_CFG_STAT_TASK_EN > 0u
OSStatTaskCPUUsageInit(&err); //统计任务
#endif
#ifdef CPU_CFG_INT_DIS_MEAS_EN //如果使能了测量中断关闭时间
CPU_IntDisMeasMaxCurReset();
#endif
#if OS_CFG_SCHED_ROUND_ROBIN_EN //当使用时间片轮转的时候
//使能时间片轮转调度功能,时间片长度为1个系统时钟节拍,既1*5=5ms
OSSchedRoundRobinCfg(DEF_ENABLED,1,&err);
#endif
OS_CRITICAL_ENTER(); //进入临界区
/* 创建LED1任务 */
OSTaskCreate((OS_TCB * )&Led1TaskTCB,
(CPU_CHAR * )"Led1_A5",
(OS_TASK_PTR )Led1,
(void * )0,
(OS_PRIO )Led1_TASK_PRIO,
(CPU_STK * )&Led1_TASK_STK[0],
(CPU_STK_SIZE)Led1_STK_SIZE/10,
(CPU_STK_SIZE)Led1_STK_SIZE,
(OS_MSG_QTY )0,
(OS_TICK )0,
(void * )0,
(OS_OPT )OS_OPT_TASK_STK_CHK|OS_OPT_TASK_STK_CLR,
(OS_ERR * )&err);
/* 创建LED2任务 */
OSTaskCreate((OS_TCB * )&Led2TaskTCB,
(CPU_CHAR * )"Led2_A6",
(OS_TASK_PTR )Led2,
(void * )0,
(OS_PRIO )Led2_TASK_PRIO,
(CPU_STK * )&Led2_TASK_STK[0],
(CPU_STK_SIZE)Led2_STK_SIZE/10,
(CPU_STK_SIZE)Led2_STK_SIZE,
(OS_MSG_QTY )0,
(OS_TICK )0,
(void * )0,
(OS_OPT )OS_OPT_TASK_STK_CHK|OS_OPT_TASK_STK_CLR,
(OS_ERR * )&err);
/* 创建Send任务 */
OSTaskCreate((OS_TCB * )&MsgTaskTCB,
(CPU_CHAR * )"send_msg",
(OS_TASK_PTR )send_msg,
(void * )0,
(OS_PRIO )MSG_TASK_PRIO,
(CPU_STK * )&MSG_TASK_STK[0],
(CPU_STK_SIZE)MSG_STK_SIZE/10,
(CPU_STK_SIZE)MSG_STK_SIZE,
(OS_MSG_QTY )0,
(OS_TICK )0,
(void * )0,
(OS_OPT )OS_OPT_TASK_STK_CHK|OS_OPT_TASK_STK_CLR,
(OS_ERR * )&err);
OS_TaskSuspend((OS_TCB*)&AppTaskStart,&err); //挂起开始任务
OS_CRITICAL_EXIT(); //进入临界区
}
static void Led1 (void *p_arg)
{
OS_ERR err;
(void)p_arg;
BSP_Init(); /* Initialize BSP functions */
CPU_Init();
Mem_Init(); /* Initialize Memory Management Module */
#if OS_CFG_STAT_TASK_EN > 0u
OSStatTaskCPUUsageInit(&err); /* Compute CPU capacity with no task running */
#endif
CPU_IntDisMeasMaxCurReset();
AppTaskCreate(); /* Create Application Tasks */
AppObjCreate(); /* Create Application Objects */
while (DEF_TRUE)
{
HAL_GPIO_WritePin(LED0_GPIO_Port,LED0_Pin, GPIO_PIN_RESET);
OSTimeDlyHMSM(0, 0, 2, 0,
OS_OPT_TIME_HMSM_STRICT,
&err);
HAL_GPIO_WritePin(LED0_GPIO_Port,LED0_Pin, GPIO_PIN_SET);
OSTimeDlyHMSM(0, 0, 2, 0,
OS_OPT_TIME_HMSM_STRICT,
&err);
}
/* USER CODE END 3 */
}
static void Led2 (void *p_arg)
{
OS_ERR err;
(void)p_arg;
BSP_Init(); /* Initialize BSP functions */
CPU_Init();
Mem_Init(); /* Initialize Memory Management Module */
#if OS_CFG_STAT_TASK_EN > 0u
OSStatTaskCPUUsageInit(&err); /* Compute CPU capacity with no task running */
#endif
CPU_IntDisMeasMaxCurReset();
AppTaskCreate(); /* Create Application Tasks */
AppObjCreate(); /* Create Application Objects */
while (DEF_TRUE)
{
HAL_GPIO_WritePin(LED1_GPIO_Port,LED1_Pin, GPIO_PIN_RESET);
OSTimeDlyHMSM(0, 0, 3, 0,
OS_OPT_TIME_HMSM_STRICT,
&err);
HAL_GPIO_WritePin(LED1_GPIO_Port,LED1_Pin, GPIO_PIN_SET);
OSTimeDlyHMSM(0, 0, 3, 0,
OS_OPT_TIME_HMSM_STRICT,
&err);
}
/* USER CODE END 3 */
}
static void send_msg (void *p_arg)
{
OS_ERR err;
(void)p_arg;
BSP_Init(); /* Initialize BSP functions */
CPU_Init();
Mem_Init(); /* Initialize Memory Management Module */
#if OS_CFG_STAT_TASK_EN > 0u
OSStatTaskCPUUsageInit(&err); /* Compute CPU capacity with no task running */
#endif
CPU_IntDisMeasMaxCurReset();
while (DEF_TRUE)
{
printf("hello uc/OS! 欢迎来到RTOS多任务环境\r\n");
//延时2秒
OSTimeDlyHMSM(0, 0, 2, 0,
OS_OPT_TIME_HMSM_STRICT,
&err);
}
}
/* USER CODE BEGIN 4 */
/**
* 函数功能: 创建应用任务
* 输入参数: p_arg 是在创建该任务时传递的形参
* 返 回 值: 无
* 说 明:无
*/
static void AppTaskCreate (void)
{
}
/**
* 函数功能: uCOSIII内核对象创建
* 输入参数: 无
* 返 回 值: 无
* 说 明:无
*/
static void AppObjCreate (void)
{
}
/* USER CODE END 4 */
/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
/* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
六、实现三个任务
其中两个task分别以1s和3s周期对LED等进行点亮-熄灭的控制;另外一个task以2s周期通过串口发送“hello uc/OS! 欢迎来到RTOS多任务环境!”(上述代码已经实现)
创建三个任务:
/* 创建LED1任务 */
OSTaskCreate((OS_TCB * )&Led1TaskTCB,
(CPU_CHAR * )"Led1_A5",
(OS_TASK_PTR )Led1,
(void * )0,
(OS_PRIO )Led1_TASK_PRIO,
(CPU_STK * )&Led1_TASK_STK[0],
(CPU_STK_SIZE)Led1_STK_SIZE/10,
(CPU_STK_SIZE)Led1_STK_SIZE,
(OS_MSG_QTY )0,
(OS_TICK )0,
(void * )0,
(OS_OPT )OS_OPT_TASK_STK_CHK|OS_OPT_TASK_STK_CLR,
(OS_ERR * )&err);
/* 创建LED2任务 */
OSTaskCreate((OS_TCB * )&Led2TaskTCB,
(CPU_CHAR * )"Led2_A6",
(OS_TASK_PTR )Led2,
(void * )0,
(OS_PRIO )Led2_TASK_PRIO,
(CPU_STK * )&Led2_TASK_STK[0],
(CPU_STK_SIZE)Led2_STK_SIZE/10,
(CPU_STK_SIZE)Led2_STK_SIZE,
(OS_MSG_QTY )0,
(OS_TICK )0,
(void * )0,
(OS_OPT )OS_OPT_TASK_STK_CHK|OS_OPT_TASK_STK_CLR,
(OS_ERR * )&err);
/* 创建Send任务 */
OSTaskCreate((OS_TCB * )&MsgTaskTCB,
(CPU_CHAR * )"send_msg",
(OS_TASK_PTR )send_msg,
(void * )0,
(OS_PRIO )MSG_TASK_PRIO,
(CPU_STK * )&MSG_TASK_STK[0],
(CPU_STK_SIZE)MSG_STK_SIZE/10,
(CPU_STK_SIZE)MSG_STK_SIZE,
(OS_MSG_QTY )0,
(OS_TICK )0,
(void * )0,
(OS_OPT )OS_OPT_TASK_STK_CHK|OS_OPT_TASK_STK_CLR,
(OS_ERR * )&err);
函数功能实现:
static void Led1 (void *p_arg)
{
OS_ERR err;
(void)p_arg;
BSP_Init(); /* Initialize BSP functions */
CPU_Init();
Mem_Init(); /* Initialize Memory Management Module */
#if OS_CFG_STAT_TASK_EN > 0u
OSStatTaskCPUUsageInit(&err); /* Compute CPU capacity with no task running */
#endif
CPU_IntDisMeasMaxCurReset();
AppTaskCreate(); /* Create Application Tasks */
AppObjCreate(); /* Create Application Objects */
while (DEF_TRUE)
{
HAL_GPIO_WritePin(LED0_GPIO_Port,LED0_Pin, GPIO_PIN_RESET);
OSTimeDlyHMSM(0, 0, 2, 0,
OS_OPT_TIME_HMSM_STRICT,
&err);
HAL_GPIO_WritePin(LED0_GPIO_Port,LED0_Pin, GPIO_PIN_SET);
OSTimeDlyHMSM(0, 0, 2, 0,
OS_OPT_TIME_HMSM_STRICT,
&err);
}
/* USER CODE END 3 */
}
static void Led2 (void *p_arg)
{
OS_ERR err;
(void)p_arg;
BSP_Init(); /* Initialize BSP functions */
CPU_Init();
Mem_Init(); /* Initialize Memory Management Module */
#if OS_CFG_STAT_TASK_EN > 0u
OSStatTaskCPUUsageInit(&err); /* Compute CPU capacity with no task running */
#endif
CPU_IntDisMeasMaxCurReset();
AppTaskCreate(); /* Create Application Tasks */
AppObjCreate(); /* Create Application Objects */
while (DEF_TRUE)
{
HAL_GPIO_WritePin(LED1_GPIO_Port,LED1_Pin, GPIO_PIN_RESET);
OSTimeDlyHMSM(0, 0, 3, 0,
OS_OPT_TIME_HMSM_STRICT,
&err);
HAL_GPIO_WritePin(LED1_GPIO_Port,LED1_Pin, GPIO_PIN_SET);
OSTimeDlyHMSM(0, 0, 3, 0,
OS_OPT_TIME_HMSM_STRICT,
&err);
}
/* USER CODE END 3 */
}
static void send_msg (void *p_arg)
{
OS_ERR err;
(void)p_arg;
BSP_Init(); /* Initialize BSP functions */
CPU_Init();
Mem_Init(); /* Initialize Memory Management Module */
#if OS_CFG_STAT_TASK_EN > 0u
OSStatTaskCPUUsageInit(&err); /* Compute CPU capacity with no task running */
#endif
CPU_IntDisMeasMaxCurReset();
while (DEF_TRUE)
{
printf("hello uc/OS! 欢迎来到RTOS多任务环境\r\n");
//延时2秒
OSTimeDlyHMSM(0, 0, 2, 0,
OS_OPT_TIME_HMSM_STRICT,
&err);
}
}
实现效果: