设置FreeSWITCH bridge超时的参数

如题，但不是一个参数，是一系列参数。

今天读到一篇文章，开眼界了，抄录如下（不翻译了，保持原味）：

• originate_timeout

How long to wait for any response to from the remote peer (100 TRYING, 180 RINGING, etc).

This is useful for knowing when to give up and try a different peer as this peer is dead.

• originate_retries

How many times to retransmit the INVITE if no 100 TRYING / 180 RINGING is received.

Like originate_timeout, this is handy for giving up sooner when a peer is dead and moving onto others.

• progress_timeout

How long we wait between sending the SIP INVITE before we get a 180/183 before we give up.

This is handy to find out if the remote end isn’t able to reach the endpoint you’re after (page the UE in a cellular context).

• bridge_answer_timeout

How long do we wait between the INVITE and a 200 OK (Including RINGING) – This is useful for “no answer” timeouts.

If you want to know why a bridge failed, ie no answer timeout reached, error on the remote end, etc, we can see why with the following variable:

variable_last_bridge_hangup_cause: [PROGRESS_TIMEOUT]
Which will allow you to tell if it’s no answer or progress timeout to blame.
 

参考链接：

https://nickvsnetworking.com/freeswitch-bridge-timers-101/