mqtt.js源码3
由于代码过长博客不支持,故分为了三个部分,这里续接源码2
function basicToDigit(codePoint) {
if (codePoint - 48 < 10) {
return codePoint - 22;
}
if (codePoint - 65 < 26) {
return codePoint - 65;
}
if (codePoint - 97 < 26) {
return codePoint - 97;
}
return base;
}
/**
* Converts a digit/integer into a basic code point.
* @see `basicToDigit()`
* @private
* @param {Number} digit The numeric value of a basic code point.
* @returns {Number} The basic code point whose value (when used for
* representing integers) is `digit`, which needs to be in the range
* `0` to `base - 1`. If `flag` is non-zero, the uppercase form is
* used; else, the lowercase form is used. The behavior is undefined
* if `flag` is non-zero and `digit` has no uppercase form.
*/
function digitToBasic(digit, flag) {
// 0..25 map to ASCII a..z or A..Z
// 26..35 map to ASCII 0..9
return digit + 22 + 75 * (digit < 26) - ((flag != 0) << 5);
}
/**
* Bias adaptation function as per section 3.4 of RFC 3492.
* https://tools.ietf.org/html/rfc3492#section-3.4
* @private
*/
function adapt(delta, numPoints, firstTime) {
var k = 0;
delta = firstTime ? floor(delta / damp) : delta >> 1;
delta += floor(delta / numPoints);
for ( /* no initialization */ ; delta > baseMinusTMin * tMax >> 1; k += base) {
delta = floor(delta / baseMinusTMin);
}
return floor(k + (baseMinusTMin + 1) * delta / (delta + skew));
}
/**
* Converts a Punycode string of ASCII-only symbols to a string of Unicode
* symbols.
* @memberOf punycode
* @param {String} input The Punycode string of ASCII-only symbols.
* @returns {String} The resulting string of Unicode symbols.
*/
function decode(input) {
// Don't use UCS-2
var output = [],
inputLength = input.length,
out,
i = 0,
n = initialN,
bias = initialBias,
basic,
j,
index,
oldi,
w,
k,
digit,
t,
/** Cached calculation results */
baseMinusT;
// Handle the basic code points: let `basic` be the number of input code
// points before the last delimiter, or `0` if there is none, then copy
// the first basic code points to the output.
basic = input.lastIndexOf(delimiter);
if (basic < 0) {
basic = 0;
}
for (j = 0; j < basic; ++j) {
// if it's not a basic code point
if (input.charCodeAt(j) >= 0x80) {
error('not-basic');
}
output.push(input.charCodeAt(j));
}
// Main decoding loop: start just after the last delimiter if any basic code
// points were copied; start at the beginning otherwise.
for (index = basic > 0 ? basic + 1 : 0; index < inputLength; /* no final expression */ ) {
// `index` is the index of the next character to be consumed.
// Decode a generalized variable-length integer into `delta`,
// which gets added to `i`. The overflow checking is easier
// if we increase `i` as we go, then subtract off its starting
// value at the end to obtain `delta`.
for (oldi = i, w = 1, k = base; /* no condition */ ; k += base) {
if (index >= inputLength) {
error('invalid-input');
}
digit = basicToDigit(input.charCodeAt(index++));
if (digit >= base || digit > floor((maxInt - i) / w)) {
error('overflow');
}
i += digit * w;
t = k <= bias ? tMin : (k >= bias + tMax ? tMax : k - bias);
if (digit < t) {
break;
}
baseMinusT = base - t;
if (w > floor(maxInt / baseMinusT)) {
error('overflow');
}
w *= baseMinusT;
}
out = output.length + 1;
bias = adapt(i - oldi, out, oldi == 0);
// `i` was supposed to wrap around from `out` to `0`,
// incrementing `n` each time, so we'll fix that now:
if (floor(i / out) > maxInt - n) {
error('overflow');
}
n += floor(i / out);
i %= out;
// Insert `n` at position `i` of the output
output.splice(i++, 0, n);
}
return ucs2encode(output);
}
/**
* Converts a string of Unicode symbols (e.g. a domain name label) to a
* Punycode string of ASCII-only symbols.
* @memberOf punycode
* @param {String} input The string of Unicode symbols.
* @returns {String} The resulting Punycode string of ASCII-only symbols.
*/
function encode(input) {
var n,
delta,
handledCPCount,
basicLength,
bias,
j,
m,
q,
k,
t,
currentValue,
output = [],
/** `inputLength` will hold the number of code points in `input`. */
inputLength,
/** Cached calculation results */
handledCPCountPlusOne,
baseMinusT,
qMinusT;
// Convert the input in UCS-2 to Unicode
input = ucs2decode(input);
// Cache the length
inputLength = input.length;
// Initialize the state
n = initialN;
delta = 0;
bias = initialBias;
// Handle the basic code points
for (j = 0; j < inputLength; ++j) {
currentValue = input[j];
if (currentValue < 0x80) {
output.push(stringFromCharCode(currentValue));
}
}
handledCPCount = basicLength = output.length;
// `handledCPCount` is the number of code points that have been handled;
// `basicLength` is the number of basic code points.
// Finish the basic string - if it is not empty - with a delimiter
if (basicLength) {
output.push(delimiter);
}
// Main encoding loop:
while (handledCPCount < inputLength) {
// All non-basic code points < n have been handled already. Find the next
// larger one:
for (m = maxInt, j = 0; j < inputLength; ++j) {
currentValue = input[j];
if (currentValue >= n && currentValue < m) {
m = currentValue;
}
}
// Increase `delta` enough to advance the decoder's <n,i> state to <m,0>,
// but guard against overflow
handledCPCountPlusOne = handledCPCount + 1;
if (m - n > floor((maxInt - delta) / handledCPCountPlusOne)) {
error('overflow');
}
delta += (m - n) * handledCPCountPlusOne;
n = m;
for (j = 0; j < inputLength; ++j) {
currentValue = input[j];
if (currentValue < n && ++delta > maxInt) {
error('overflow');
}
if (currentValue == n) {
// Represent delta as a generalized variable-length integer
for (q = delta, k = base; /* no condition */ ; k += base) {
t = k <= bias ? tMin : (k >= bias + tMax ? tMax : k - bias);
if (q < t) {
break;
}
qMinusT = q - t;
baseMinusT = base - t;
output.push(
stringFromCharCode(digitToBasic(t + qMinusT % baseMinusT, 0))
);
q = floor(qMinusT / baseMinusT);
}
output.push(stringFromCharCode(digitToBasic(q, 0)));
bias = adapt(delta, handledCPCountPlusOne, handledCPCount == basicLength);
delta = 0;
++handledCPCount;
}
}
++delta;
++n;
}
return output.join('');
}
/**
* Converts a Punycode string representing a domain name or an email address
* to Unicode. Only the Punycoded parts of the input will be converted, i.e.
* it doesn't matter if you call it on a string that has already been
* converted to Unicode.
* @memberOf punycode
* @param {String} input The Punycoded domain name or email address to
* convert to Unicode.
* @returns {String} The Unicode representation of the given Punycode
* string.
*/
function toUnicode(input) {
return mapDomain(input, function (string) {
return regexPunycode.test(string) ?
decode(string.slice(4).toLowerCase()) :
string;
});
}
/**
* Converts a Unicode string representing a domain name or an email address to
* Punycode. Only the non-ASCII parts of the domain name will be converted,
* i.e. it doesn't matter if you call it with a domain that's already in
* ASCII.
* @memberOf punycode
* @param {String} input The domain name or email address to convert, as a
* Unicode string.
* @returns {String} The Punycode representation of the given domain name or
* email address.
*/
function toASCII(input) {
return mapDomain(input, function (string) {
return regexNonASCII.test(string) ?
'xn--' + encode(string) :
string;
});
}
/*--------------------------------------------------------------------------*/
/** Define the public API */
punycode = {
/**
* A string representing the current Punycode.js version number.
* @memberOf punycode
* @type String
*/
'version': '1.4.1',
/**
* An object of methods to convert from JavaScript's internal character
* representation (UCS-2) to Unicode code points, and back.
* @see <https://mathiasbynens.be/notes/javascript-encoding>
* @memberOf punycode
* @type Object
*/
'ucs2': {
'decode': ucs2decode,
'encode': ucs2encode
},
'decode': decode,
'encode': encode,
'toASCII': toASCII,
'toUnicode': toUnicode
};
/** Expose `punycode` */
// Some AMD build optimizers, like r.js, check for specific condition patterns
// like the following:
if (
typeof define == 'function' &&
typeof define.amd == 'object' &&
define.amd
) {
define('punycode', function () {
return punycode;
});
} else if (freeExports && freeModule) {
if (module.exports == freeExports) {
// in Node.js, io.js, or RingoJS v0.8.0+
freeModule.exports = punycode;
} else {
// in Narwhal or RingoJS v0.7.0-
for (key in punycode) {
punycode.hasOwnProperty(key) && (freeExports[key] = punycode[key]);
}
}
} else {
// in Rhino or a web browser
root.punycode = punycode;
}
}(this));
}).call(this, typeof global !== "undefined" ? global : typeof self !== "undefined" ? self : typeof window !== "undefined" ? window : {})
}, {}],
94: [function (require, module, exports) {
// Copyright Joyent, Inc. and other Node contributors.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to permit
// persons to whom the Software is furnished to do so, subject to the
// following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
// USE OR OTHER DEALINGS IN THE SOFTWARE.
'use strict';
// If obj.hasOwnProperty has been overridden, then calling
// obj.hasOwnProperty(prop) will break.
// See: https://github.com/joyent/node/issues/1707
function hasOwnProperty(obj, prop) {
return Object.prototype.hasOwnProperty.call(obj, prop);
}
module.exports = function (qs, sep, eq, options) {
sep = sep || '&';
eq = eq || '=';
var obj = {};
if (typeof qs !== 'string' || qs.length === 0) {
return obj;
}
var regexp = /\+/g;
qs = qs.split(sep);
var maxKeys = 1000;
if (options && typeof options.maxKeys === 'number') {
maxKeys = options.maxKeys;
}
var len = qs.length;
// maxKeys <= 0 means that we should not limit keys count
if (maxKeys > 0 && len > maxKeys) {
len = maxKeys;
}
for (var i = 0; i < len; ++i) {
var x = qs[i].replace(regexp, '%20'),
idx = x.indexOf(eq),
kstr, vstr, k, v;
if (idx >= 0) {
kstr = x.substr(0, idx);
vstr = x.substr(idx + 1);
} else {
kstr = x;
vstr = '';
}
k = decodeURIComponent(kstr);
v = decodeURIComponent(vstr);
if (!hasOwnProperty(obj, k)) {
obj[k] = v;
} else if (isArray(obj[k])) {
obj[k].push(v);
} else {
obj[k] = [obj[k], v];
}
}
return obj;
};
var isArray = Array.isArray || function (xs) {
return Object.prototype.toString.call(xs) === '[object Array]';
};
}, {}],
95: [function (require, module, exports) {
// Copyright Joyent, Inc. and other Node contributors.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to permit
// persons to whom the Software is furnished to do so, subject to the
// following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
// USE OR OTHER DEALINGS IN THE SOFTWARE.
'use strict';
var stringifyPrimitive = function (v) {
switch (typeof v) {
case 'string':
return v;
case 'boolean':
return v ? 'true' : 'false';
case 'number':
return isFinite(v) ? v : '';
default:
return '';
}
};
module.exports = function (obj, sep, eq, name) {
sep = sep || '&';
eq = eq || '=';
if (obj === null) {
obj = undefined;
}
if (typeof obj === 'object') {
return map(objectKeys(obj), function (k) {
var ks = encodeURIComponent(stringifyPrimitive(k)) + eq;
if (isArray(obj[k])) {
return map(obj[k], function (v) {
return ks + encodeURIComponent(stringifyPrimitive(v));
}).join(sep);
} else {
return ks + encodeURIComponent(stringifyPrimitive(obj[k]));
}
}).join(sep);
}
if (!name) return '';
return encodeURIComponent(stringifyPrimitive(name)) + eq +
encodeURIComponent(stringifyPrimitive(obj));
};
var isArray = Array.isArray || function (xs) {
return Object.prototype.toString.call(xs) === '[object Array]';
};
function map(xs, f) {
if (xs.map) return xs.map(f);
var res = [];
for (var i = 0; i < xs.length; i++) {
res.push(f(xs[i], i));
}
return res;
}
var objectKeys = Object.keys || function (obj) {
var res = [];
for (var key in obj) {
if (Object.prototype.hasOwnProperty.call(obj, key)) res.push(key);
}
return res;
};
}, {}],
96: [function (require, module, exports) {
'use strict';
exports.decode = exports.parse = require('./decode');
exports.encode = exports.stringify = require('./encode');
}, {
"./decode": 94,
"./encode": 95
}],
97: [function (require, module, exports) {
module.exports = require('./lib/_stream_duplex.js');
}, {
"./lib/_stream_duplex.js": 98
}],
98: [function (require, module, exports) {
// Copyright Joyent, Inc. and other Node contributors.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to permit
// persons to whom the Software is furnished to do so, subject to the
// following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
// USE OR OTHER DEALINGS IN THE SOFTWARE.
// a duplex stream is just a stream that is both readable and writable.
// Since JS doesn't have multiple prototypal inheritance, this class
// prototypally inherits from Readable, and then parasitically from
// Writable.
'use strict';
/*<replacement>*/
var pna = require('process-nextick-args');
/*</replacement>*/
/*<replacement>*/
var objectKeys = Object.keys || function (obj) {
var keys = [];
for (var key in obj) {
keys.push(key);
}
return keys;
};
/*</replacement>*/
module.exports = Duplex;
/*<replacement>*/
var util = require('core-util-is');
util.inherits = require('inherits');
/*</replacement>*/
var Readable = require('./_stream_readable');
var Writable = require('./_stream_writable');
util.inherits(Duplex, Readable);
{
// avoid scope creep, the keys array can then be collected
var keys = objectKeys(Writable.prototype);
for (var v = 0; v < keys.length; v++) {
var method = keys[v];
if (!Duplex.prototype[method]) Duplex.prototype[method] = Writable.prototype[method];
}
}
function Duplex(options) {
if (!(this instanceof Duplex)) return new Duplex(options);
Readable.call(this, options);
Writable.call(this, options);
if (options && options.readable === false) this.readable = false;
if (options && options.writable === false) this.writable = false;
this.allowHalfOpen = true;
if (options && options.allowHalfOpen === false) this.allowHalfOpen = false;
this.once('end', onend);
}
Object.defineProperty(Duplex.prototype, 'writableHighWaterMark', {
// making it explicit this property is not enumerable
// because otherwise some prototype manipulation in
// userland will fail
enumerable: false,
get: function () {
return this._writableState.highWaterMark;
}
});
// the no-half-open enforcer
function onend() {
// if we allow half-open state, or if the writable side ended,
// then we're ok.
if (this.allowHalfOpen || this._writableState.ended) return;
// no more data can be written.
// But allow more writes to happen in this tick.
pna.nextTick(onEndNT, this);
}
function onEndNT(self) {
self.end();
}
Object.defineProperty(Duplex.prototype, 'destroyed', {
get: function () {
if (this._readableState === undefined || this._writableState === undefined) {
return false;
}
return this._readableState.destroyed && this._writableState.destroyed;
},
set: function (value) {
// we ignore the value if the stream
// has not been initialized yet
if (this._readableState === undefined || this._writableState === undefined) {
return;
}
// backward compatibility, the user is explicitly
// managing destroyed
this._readableState.destroyed = value;
this._writableState.destroyed = value;
}
});
Duplex.prototype._destroy = function (err, cb) {
this.push(null);
this.end();
pna.nextTick(cb, err);
};
}, {
"./_stream_readable": 100,
"./_stream_writable": 102,
"core-util-is": 14,
"inherits": 80,
"process-nextick-args": 91
}],
99: [function (require, module, exports) {
// Copyright Joyent, Inc. and other Node contributors.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to permit
// persons to whom the Software is furnished to do so, subject to the
// following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
// USE OR OTHER DEALINGS IN THE SOFTWARE.
// a passthrough stream.
// basically just the most minimal sort of Transform stream.
// Every written chunk gets output as-is.
'use strict';
module.exports = PassThrough;
var Transform = require('./_stream_transform');
/*<replacement>*/
var util = require('core-util-is');
util.inherits = require('inherits');
/*</replacement>*/
util.inherits(PassThrough, Transform);
function PassThrough(options) {
if (!(this instanceof PassThrough)) return new PassThrough(options);
Transform.call(this, options);
}
PassThrough.prototype._transform = function (chunk, encoding, cb) {
cb(null, chunk);
};
}, {
"./_stream_transform": 101,
"core-util-is": 14,
"inherits": 80
}],
100: [function (require, module, exports) {
(function (process, global) {
// Copyright Joyent, Inc. and other Node contributors.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to permit
// persons to whom the Software is furnished to do so, subject to the
// following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
// USE OR OTHER DEALINGS IN THE SOFTWARE.
'use strict';
/*<replacement>*/
var pna = require('process-nextick-args');
/*</replacement>*/
module.exports = Readable;
/*<replacement>*/
var isArray = require('isarray');
/*</replacement>*/
/*<replacement>*/
var Duplex;
/*</replacement>*/
Readable.ReadableState = ReadableState;
/*<replacement>*/
var EE = require('events').EventEmitter;
var EElistenerCount = function (emitter, type) {
return emitter.listeners(type).length;
};
/*</replacement>*/
/*<replacement>*/
var Stream = require('./internal/streams/stream');
/*</replacement>*/
/*<replacement>*/
var Buffer = require('safe-buffer').Buffer;
var OurUint8Array = global.Uint8Array || function () {};
function _uint8ArrayToBuffer(chunk) {
return Buffer.from(chunk);
}
function _isUint8Array(obj) {
return Buffer.isBuffer(obj) || obj instanceof OurUint8Array;
}
/*</replacement>*/
/*<replacement>*/
var util = require('core-util-is');
util.inherits = require('inherits');
/*</replacement>*/
/*<replacement>*/
var debugUtil = require('util');
var debug = void 0;
if (debugUtil && debugUtil.debuglog) {
debug = debugUtil.debuglog('stream');
} else {
debug = function () {};
}
/*</replacement>*/
var BufferList = require('./internal/streams/BufferList');
var destroyImpl = require('./internal/streams/destroy');
var StringDecoder;
util.inherits(Readable, Stream);
var kProxyEvents = ['error', 'close', 'destroy', 'pause', 'resume'];
function prependListener(emitter, event, fn) {
// Sadly this is not cacheable as some libraries bundle their own
// event emitter implementation with them.
if (typeof emitter.prependListener === 'function') return emitter.prependListener(event, fn);
// This is a hack to make sure that our error handler is attached before any
// userland ones. NEVER DO THIS. This is here only because this code needs
// to continue to work with older versions of Node.js that do not include
// the prependListener() method. The goal is to eventually remove this hack.
if (!emitter._events || !emitter._events[event]) emitter.on(event, fn);
else if (isArray(emitter._events[event])) emitter._events[event].unshift(fn);
else emitter._events[event] = [fn, emitter._events[event]];
}
function ReadableState(options, stream) {
Duplex = Duplex || require('./_stream_duplex');
options = options || {};
// Duplex streams are both readable and writable, but share
// the same options object.
// However, some cases require setting options to different
// values for the readable and the writable sides of the duplex stream.
// These options can be provided separately as readableXXX and writableXXX.
var isDuplex = stream instanceof Duplex;
// object stream flag. Used to make read(n) ignore n and to
// make all the buffer merging and length checks go away
this.objectMode = !!options.objectMode;
if (isDuplex) this.objectMode = this.objectMode || !!options.readableObjectMode;
// the point at which it stops calling _read() to fill the buffer
// Note: 0 is a valid value, means "don't call _read preemptively ever"
var hwm = options.highWaterMark;
var readableHwm = options.readableHighWaterMark;
var defaultHwm = this.objectMode ? 16 : 16 * 1024;
if (hwm || hwm === 0) this.highWaterMark = hwm;
else if (isDuplex && (readableHwm || readableHwm === 0)) this.highWaterMark = readableHwm;
else this.highWaterMark = defaultHwm;
// cast to ints.
this.highWaterMark = Math.floor(this.highWaterMark);
// A linked list is used to store data chunks instead of an array because the
// linked list can remove elements from the beginning faster than
// array.shift()
this.buffer = new BufferList();
this.length = 0;
this.pipes = null;
this.pipesCount = 0;
this.flowing = null;
this.ended = false;
this.endEmitted = false;
this.reading = false;
// a flag to be able to tell if the event 'readable'/'data' is emitted
// immediately, or on a later tick. We set this to true at first, because
// any actions that shouldn't happen until "later" should generally also
// not happen before the first read call.
this.sync = true;
// whenever we return null, then we set a flag to say
// that we're awaiting a 'readable' event emission.
this.needReadable = false;
this.emittedReadable = false;
this.readableListening = false;
this.resumeScheduled = false;
// has it been destroyed
this.destroyed = false;
// Crypto is kind of old and crusty. Historically, its default string
// encoding is 'binary' so we have to make this configurable.
// Everything else in the universe uses 'utf8', though.
this.defaultEncoding = options.defaultEncoding || 'utf8';
// the number of writers that are awaiting a drain event in .pipe()s
this.awaitDrain = 0;
// if true, a maybeReadMore has been scheduled
this.readingMore = false;
this.decoder = null;
this.encoding = null;
if (options.encoding) {
if (!StringDecoder) StringDecoder = require('string_decoder/').StringDecoder;
this.decoder = new StringDecoder(options.encoding);
this.encoding = options.encoding;
}
}
function Readable(options) {
Duplex = Duplex || require('./_stream_duplex');
if (!(this instanceof Readable)) return new Readable(options);
this._readableState = new ReadableState(options, this);
// legacy
this.readable = true;
if (options) {
if (typeof options.read === 'function') this._read = options.read;
if (typeof options.destroy === 'function') this._destroy = options.destroy;
}
Stream.call(this);
}
Object.defineProperty(Readable.prototype, 'destroyed', {
get: function () {
if (this._readableState === undefined) {
return false;
}
return this._readableState.destroyed;
},
set: function (value) {
// we ignore the value if the stream
// has not been initialized yet
if (!this._readableState) {
return;
}
// backward compatibility, the user is explicitly
// managing destroyed
this._readableState.destroyed = value;
}
});
Readable.prototype.destroy = destroyImpl.destroy;
Readable.prototype._undestroy = destroyImpl.undestroy;
Readable.prototype._destroy = function (err, cb) {
this.push(null);
cb(err);
};
// Manually shove something into the read() buffer.
// This returns true if the highWaterMark has not been hit yet,
// similar to how Writable.write() returns true if you should
// write() some more.
Readable.prototype.push = function (chunk, encoding) {
var state = this._readableState;
var skipChunkCheck;
if (!state.objectMode) {
if (typeof chunk === 'string') {
encoding = encoding || state.defaultEncoding;
if (encoding !== state.encoding) {
chunk = Buffer.from(chunk, encoding);
encoding = '';
}
skipChunkCheck = true;
}
} else {
skipChunkCheck = true;
}
return readableAddChunk(this, chunk, encoding, false, skipChunkCheck);
};
// Unshift should *always* be something directly out of read()
Readable.prototype.unshift = function (chunk) {
return readableAddChunk(this, chunk, null, true, false);
};
function readableAddChunk(stream, chunk, encoding, addToFront, skipChunkCheck) {
var state = stream._readableState;
if (chunk === null) {
state.reading = false;
onEofChunk(stream, state);
} else {
var er;
if (!skipChunkCheck) er = chunkInvalid(state, chunk);
if (er) {
stream.emit('error', er);
} else if (state.objectMode || chunk && chunk.length > 0) {
if (typeof chunk !== 'string' && !state.objectMode && Object.getPrototypeOf(chunk) !== Buffer.prototype) {
chunk = _uint8ArrayToBuffer(chunk);
}
if (addToFront) {
if (state.endEmitted) stream.emit('error', new Error('stream.unshift() after end event'));
else addChunk(stream, state, chunk, true);
} else if (state.ended) {
stream.emit('error', new Error('stream.push() after EOF'));
} else {
state.reading = false;
if (state.decoder && !encoding) {
chunk = state.decoder.write(chunk);
if (state.objectMode || chunk.length !== 0) addChunk(stream, state, chunk, false);
else maybeReadMore(stream, state);
} else {
addChunk(stream, state, chunk, false);
}
}
} else if (!addToFront) {
state.reading = false;
}
}
return needMoreData(state);
}
function addChunk(stream, state, chunk, addToFront) {
if (state.flowing && state.length === 0 && !state.sync) {
stream.emit('data', chunk);
stream.read(0);
} else {
// update the buffer info.
state.length += state.objectMode ? 1 : chunk.length;
if (addToFront) state.buffer.unshift(chunk);
else state.buffer.push(chunk);
if (state.needReadable) emitReadable(stream);
}
maybeReadMore(stream, state);
}
function chunkInvalid(state, chunk) {
var er;
if (!_isUint8Array(chunk) && typeof chunk !== 'string' && chunk !== undefined && !state.objectMode) {
er = new TypeError('Invalid non-string/buffer chunk');
}
return er;
}
// if it's past the high water mark, we can push in some more.
// Also, if we have no data yet, we can stand some
// more bytes. This is to work around cases where hwm=0,
// such as the repl. Also, if the push() triggered a
// readable event, and the user called read(largeNumber) such that
// needReadable was set, then we ought to push more, so that another
// 'readable' event will be triggered.
function needMoreData(state) {
return !state.ended && (state.needReadable || state.length < state.highWaterMark || state.length === 0);
}
Readable.prototype.isPaused = function () {
return this._readableState.flowing === false;
};
// backwards compatibility.
Readable.prototype.setEncoding = function (enc) {
if (!StringDecoder) StringDecoder = require('string_decoder/').StringDecoder;
this._readableState.decoder = new StringDecoder(enc);
this._readableState.encoding = enc;
return this;
};
// Don't raise the hwm > 8MB
var MAX_HWM = 0x800000;
function computeNewHighWaterMark(n) {
if (n >= MAX_HWM) {
n = MAX_HWM;
} else {
// Get the next highest power of 2 to prevent increasing hwm excessively in
// tiny amounts
n--;
n |= n >>> 1;
n |= n >>> 2;
n |= n >>> 4;
n |= n >>> 8;
n |= n >>> 16;
n++;
}
return n;
}
// This function is designed to be inlinable, so please take care when making
// changes to the function body.
function howMuchToRead(n, state) {
if (n <= 0 || state.length === 0 && state.ended) return 0;
if (state.objectMode) return 1;
if (n !== n) {
// Only flow one buffer at a time
if (state.flowing && state.length) return state.buffer.head.data.length;
else return state.length;
}
// If we're asking for more than the current hwm, then raise the hwm.
if (n > state.highWaterMark) state.highWaterMark = computeNewHighWaterMark(n);
if (n <= state.length) return n;
// Don't have enough
if (!state.ended) {
state.needReadable = true;
return 0;
}
return state.length;
}
// you can override either this method, or the async _read(n) below.
Readable.prototype.read = function (n) {
debug('read', n);
n = parseInt(n, 10);
var state = this._readableState;
var nOrig = n;
if (n !== 0) state.emittedReadable = false;
// if we're doing read(0) to trigger a readable event, but we
// already have a bunch of data in the buffer, then just trigger
// the 'readable' event and move on.
if (n === 0 && state.needReadable && (state.length >= state.highWaterMark || state.ended)) {
debug('read: emitReadable', state.length, state.ended);
if (state.length === 0 && state.ended) endReadable(this);
else emitReadable(this);
return null;
}
n = howMuchToRead(n, state);
// if we've ended, and we're now clear, then finish it up.
if (n === 0 && state.ended) {
if (state.length === 0) endReadable(this);
return null;
}
// All the actual chunk generation logic needs to be
// *below* the call to _read. The reason is that in certain
// synthetic stream cases, such as passthrough streams, _read
// may be a completely synchronous operation which may change
// the state of the read buffer, providing enough data when
// before there was *not* enough.
//
// So, the steps are:
// 1. Figure out what the state of things will be after we do
// a read from the buffer.
//
// 2. If that resulting state will trigger a _read, then call _read.
// Note that this may be asynchronous, or synchronous. Yes, it is
// deeply ugly to write APIs this way, but that still doesn't mean
// that the Readable class should behave improperly, as streams are
// designed to be sync/async agnostic.
// Take note if the _read call is sync or async (ie, if the read call
// has returned yet), so that we know whether or not it's safe to emit
// 'readable' etc.
//
// 3. Actually pull the requested chunks out of the buffer and return.
// if we need a readable event, then we need to do some reading.
var doRead = state.needReadable;
debug('need readable', doRead);
// if we currently have less than the highWaterMark, then also read some
if (state.length === 0 || state.length - n < state.highWaterMark) {
doRead = true;
debug('length less than watermark', doRead);
}
// however, if we've ended, then there's no point, and if we're already
// reading, then it's unnecessary.
if (state.ended || state.reading) {
doRead = false;
debug('reading or ended', doRead);
} else if (doRead) {
debug('do read');
state.reading = true;
state.sync = true;
// if the length is currently zero, then we *need* a readable event.
if (state.length === 0) state.needReadable = true;
// call internal read method
this._read(state.highWaterMark);
state.sync = false;
// If _read pushed data synchronously, then `reading` will be false,
// and we need to re-evaluate how much data we can return to the user.
if (!state.reading) n = howMuchToRead(nOrig, state);
}
var ret;
if (n > 0) ret = fromList(n, state);
else ret = null;
if (ret === null) {
state.needReadable = true;
n = 0;
} else {
state.length -= n;
}
if (state.length === 0) {
// If we have nothing in the buffer, then we want to know
// as soon as we *do* get something into the buffer.
if (!state.ended) state.needReadable = true;
// If we tried to read() past the EOF, then emit end on the next tick.
if (nOrig !== n && state.ended) endReadable(this);
}
if (ret !== null) this.emit('data', ret);
return ret;
};
function onEofChunk(stream, state) {
if (state.ended) return;
if (state.decoder) {
var chunk = state.decoder.end();
if (chunk && chunk.length) {
state.buffer.push(chunk);
state.length += state.objectMode ? 1 : chunk.length;
}
}
state.ended = true;
// emit 'readable' now to make sure it gets picked up.
emitReadable(stream);
}
// Don't emit readable right away in sync mode, because this can trigger
// another read() call => stack overflow. This way, it might trigger
// a nextTick recursion warning, but that's not so bad.
function emitReadable(stream) {
var state = stream._readableState;
state.needReadable = false;
if (!state.emittedReadable) {
debug('emitReadable', state.flowing);
state.emittedReadable = true;
if (state.sync) pna.nextTick(emitReadable_, stream);
else emitReadable_(stream);
}
}
function emitReadable_(stream) {
debug('emit readable');
stream.emit('readable');
flow(stream);
}
// at this point, the user has presumably seen the 'readable' event,
// and called read() to consume some data. that may have triggered
// in turn another _read(n) call, in which case reading = true if
// it's in progress.
// However, if we're not ended, or reading, and the length < hwm,
// then go ahead and try to read some more preemptively.
function maybeReadMore(stream, state) {
if (!state.readingMore) {
state.readingMore = true;
pna.nextTick(maybeReadMore_, stream, state);
}
}
function maybeReadMore_(stream, state) {
var len = state.length;
while (!state.reading && !state.flowing && !state.ended && state.length < state.highWaterMark) {
debug('maybeReadMore read 0');
stream.read(0);
if (len === state.length)
// didn't get any data, stop spinning.
break;
else len = state.length;
}
state.readingMore = false;
}
// abstract method. to be overridden in specific implementation classes.
// call cb(er, data) where data is <= n in length.
// for virtual (non-string, non-buffer) streams, "length" is somewhat
// arbitrary, and perhaps not very meaningful.
Readable.prototype._read = function (n) {
this.emit('error', new Error('_read() is not implemented'));
};
Readable.prototype.pipe = function (dest, pipeOpts) {
var src = this;
var state = this._readableState;
switch (state.pipesCount) {
case 0:
state.pipes = dest;
break;
case 1:
state.pipes = [state.pipes, dest];
break;
default:
state.pipes.push(dest);
break;
}
state.pipesCount += 1;
debug('pipe count=%d opts=%j', state.pipesCount, pipeOpts);
var doEnd = (!pipeOpts || pipeOpts.end !== false) && dest !== process.stdout && dest !== process.stderr;
var endFn = doEnd ? onend : unpipe;
if (state.endEmitted) pna.nextTick(endFn);
else src.once('end', endFn);
dest.on('unpipe', onunpipe);
function onunpipe(readable, unpipeInfo) {
debug('onunpipe');
if (readable === src) {
if (unpipeInfo && unpipeInfo.hasUnpiped === false) {
unpipeInfo.hasUnpiped = true;
cleanup();
}
}
}
function onend() {
debug('onend');
dest.end();
}
// when the dest drains, it reduces the awaitDrain counter
// on the source. This would be more elegant with a .once()
// handler in flow(), but adding and removing repeatedly is
// too slow.
var ondrain = pipeOnDrain(src);
dest.on('drain', ondrain);
var cleanedUp = false;
function cleanup() {
debug('cleanup');
// cleanup event handlers once the pipe is broken
dest.removeListener('close', onclose);
dest.removeListener('finish', onfinish);
dest.removeListener('drain', ondrain);
dest.removeListener('error', onerror);
dest.removeListener('unpipe', onunpipe);
src.removeListener('end', onend);
src.removeListener('end', unpipe);
src.removeListener('data', ondata);
cleanedUp = true;
// if the reader is waiting for a drain event from this
// specific writer, then it would cause it to never start
// flowing again.
// So, if this is awaiting a drain, then we just call it now.
// If we don't know, then assume that we are waiting for one.
if (state.awaitDrain && (!dest._writableState || dest._writableState.needDrain)) ondrain();
}
// If the user pushes more data while we're writing to dest then we'll end up
// in ondata again. However, we only want to increase awaitDrain once because
// dest will only emit one 'drain' event for the multiple writes.
// => Introduce a guard on increasing awaitDrain.
var increasedAwaitDrain = false;
src.on('data', ondata);
function ondata(chunk) {
debug('ondata');
increasedAwaitDrain = false;
var ret = dest.write(chunk);
if (false === ret && !increasedAwaitDrain) {
// If the user unpiped during `dest.write()`, it is possible
// to get stuck in a permanently paused state if that write
// also returned false.
// => Check whether `dest` is still a piping destination.
if ((state.pipesCount === 1 && state.pipes === dest || state.pipesCount > 1 && indexOf(state.pipes, dest) !== -1) && !cleanedUp) {
debug('false write response, pause', src._readableState.awaitDrain);
src._readableState.awaitDrain++;
increasedAwaitDrain = true;
}
src.pause();
}
}
// if the dest has an error, then stop piping into it.
// however, don't suppress the throwing behavior for this.
function onerror(er) {
debug('onerror', er);
unpipe();
dest.removeListener('error', onerror);
if (EElistenerCount(dest, 'error') === 0) dest.emit('error', er);
}
// Make sure our error handler is attached before userland ones.
prependListener(dest, 'error', onerror);
// Both close and finish should trigger unpipe, but only once.
function onclose() {
dest.removeListener('finish', onfinish);
unpipe();
}
dest.once('close', onclose);
function onfinish() {
debug('onfinish');
dest.removeListener('close', onclose);
unpipe();
}
dest.once('finish', onfinish);
function unpipe() {
debug('unpipe');
src.unpipe(dest);
}
// tell the dest that it's being piped to
dest.emit('pipe', src);
// start the flow if it hasn't been started already.
if (!state.flowing) {
debug('pipe resume');
src.resume();
}
return dest;
};
function pipeOnDrain(src) {
return function () {
var state = src._readableState;
debug('pipeOnDrain', state.awaitDrain);
if (state.awaitDrain) state.awaitDrain--;
if (state.awaitDrain === 0 && EElistenerCount(src, 'data')) {
state.flowing = true;
flow(src);
}
};
}
Readable.prototype.unpipe = function (dest) {
var state = this._readableState;
var unpipeInfo = {
hasUnpiped: false
};
// if we're not piping anywhere, then do nothing.
if (state.pipesCount === 0) return this;
// just one destination. most common case.
if (state.pipesCount === 1) {
// passed in one, but it's not the right one.
if (dest && dest !== state.pipes) return this;
if (!dest) dest = state.pipes;
// got a match.
state.pipes = null;
state.pipesCount = 0;
state.flowing = false;
if (dest) dest.emit('unpipe', this, unpipeInfo);
return this;
}
// slow case. multiple pipe destinations.
if (!dest) {
// remove all.
var dests = state.pipes;
var len = state.pipesCount;
state.pipes = null;
state.pipesCount = 0;
state.flowing = false;
for (var i = 0; i < len; i++) {
dests[i].emit('unpipe', this, unpipeInfo);
}
return this;
}
// try to find the right one.
var index = indexOf(state.pipes, dest);
if (index === -1) return this;
state.pipes.splice(index, 1);
state.pipesCount -= 1;
if (state.pipesCount === 1) state.pipes = state.pipes[0];
dest.emit('unpipe', this, unpipeInfo);
return this;
};
// set up data events if they are asked for
// Ensure readable listeners eventually get something
Readable.prototype.on = function (ev, fn) {
var res = Stream.prototype.on.call(this, ev, fn);
if (ev === 'data') {
// Start flowing on next tick if stream isn't explicitly paused
if (this._readableState.flowing !== false) this.resume();
} else if (ev === 'readable') {
var state = this._readableState;
if (!state.endEmitted && !state.readableListening) {
state.readableListening = state.needReadable = true;
state.emittedReadable = false;
if (!state.reading) {
pna.nextTick(nReadingNextTick, this);
} else if (state.length) {
emitReadable(this);
}
}
}
return res;
};
Readable.prototype.addListener = Readable.prototype.on;
function nReadingNextTick(self) {
debug('readable nexttick read 0');
self.read(0);
}
// pause() and resume() are remnants of the legacy readable stream API
// If the user uses them, then switch into old mode.
Readable.prototype.resume = function () {
var state = this._readableState;
if (!state.flowing) {
debug('resume');
state.flowing = true;
resume(this, state);
}
return this;
};
function resume(stream, state) {
if (!state.resumeScheduled) {
state.resumeScheduled = true;
pna.nextTick(resume_, stream, state);
}
}
function resume_(stream, state) {
if (!state.reading) {
debug('resume read 0');
stream.read(0);
}
state.resumeScheduled = false;
state.awaitDrain = 0;
stream.emit('resume');
flow(stream);
if (state.flowing && !state.reading) stream.read(0);
}
Readable.prototype.pause = function () {
debug('call pause flowing=%j', this._readableState.flowing);
if (false !== this._readableState.flowing) {
debug('pause');
this._readableState.flowing = false;
this.emit('pause');
}
return this;
};
function flow(stream) {
var state = stream._readableState;
debug('flow', state.flowing);
while (state.flowing && stream.read() !== null) {}
}
// wrap an old-style stream as the async data source.
// This is *not* part of the readable stream interface.
// It is an ugly unfortunate mess of history.
Readable.prototype.wrap = function (stream) {
var _this = this;
var state = this._readableState;
var paused = false;
stream.on('end', function () {
debug('wrapped end');
if (state.decoder && !state.ended) {
var chunk = state.decoder.end();
if (chunk && chunk.length) _this.push(chunk);
}
_this.push(null);
});
stream.on('data', function (chunk) {
debug('wrapped data');
if (state.decoder) chunk = state.decoder.write(chunk);
// don't skip over falsy values in objectMode
if (state.objectMode && (chunk === null || chunk === undefined)) return;
else if (!state.objectMode && (!chunk || !chunk.length)) return;
var ret = _this.push(chunk);
if (!ret) {
paused = true;
stream.pause();
}
});
// proxy all the other methods.
// important when wrapping filters and duplexes.
for (var i in stream) {
if (this[i] === undefined && typeof stream[i] === 'function') {
this[i] = function (method) {
return function () {
return stream[method].apply(stream, arguments);
};
}(i);
}
}
// proxy certain important events.
for (var n = 0; n < kProxyEvents.length; n++) {
stream.on(kProxyEvents[n], this.emit.bind(this, kProxyEvents[n]));
}
// when we try to consume some more bytes, simply unpause the
// underlying stream.
this._read = function (n) {
debug('wrapped _read', n);
if (paused) {
paused = false;
stream.resume();
}
};
return this;
};
Object.defineProperty(Readable.prototype, 'readableHighWaterMark', {
// making it explicit this property is not enumerable
// because otherwise some prototype manipulation in
// userland will fail
enumerable: false,
get: function () {
return this._readableState.highWaterMark;
}
});
// exposed for testing purposes only.
Readable._fromList = fromList;
// Pluck off n bytes from an array of buffers.
// Length is the combined lengths of all the buffers in the list.
// This function is designed to be inlinable, so please take care when making
// changes to the function body.
function fromList(n, state) {
// nothing buffered
if (state.length === 0) return null;
var ret;
if (state.objectMode) ret = state.buffer.shift();
else if (!n || n >= state.length) {
// read it all, truncate the list
if (state.decoder) ret = state.buffer.join('');
else if (state.buffer.length === 1) ret = state.buffer.head.data;
else ret = state.buffer.concat(state.length);
state.buffer.clear();
} else {
// read part of list
ret = fromListPartial(n, state.buffer, state.decoder);
}
return ret;
}
// Extracts only enough buffered data to satisfy the amount requested.
// This function is designed to be inlinable, so please take care when making
// changes to the function body.
function fromListPartial(n, list, hasStrings) {
var ret;
if (n < list.head.data.length) {
// slice is the same for buffers and strings
ret = list.head.data.slice(0, n);
list.head.data = list.head.data.slice(n);
} else if (n === list.head.data.length) {
// first chunk is a perfect match
ret = list.shift();
} else {
// result spans more than one buffer
ret = hasStrings ? copyFromBufferString(n, list) : copyFromBuffer(n, list);
}
return ret;
}
// Copies a specified amount of characters from the list of buffered data
// chunks.
// This function is designed to be inlinable, so please take care when making
// changes to the function body.
function copyFromBufferString(n, list) {
var p = list.head;
var c = 1;
var ret = p.data;
n -= ret.length;
while (p = p.next) {
var str = p.data;
var nb = n > str.length ? str.length : n;
if (nb === str.length) ret += str;
else ret += str.slice(0, n);
n -= nb;
if (n === 0) {
if (nb === str.length) {
++c;
if (p.next) list.head = p.next;
else list.head = list.tail = null;
} else {
list.head = p;
p.data = str.slice(nb);
}
break;
}
++c;
}
list.length -= c;
return ret;
}
// Copies a specified amount of bytes from the list of buffered data chunks.
// This function is designed to be inlinable, so please take care when making
// changes to the function body.
function copyFromBuffer(n, list) {
var ret = Buffer.allocUnsafe(n);
var p = list.head;
var c = 1;
p.data.copy(ret);
n -= p.data.length;
while (p = p.next) {
var buf = p.data;
var nb = n > buf.length ? buf.length : n;
buf.copy(ret, ret.length - n, 0, nb);
n -= nb;
if (n === 0) {
if (nb === buf.length) {
++c;
if (p.next) list.head = p.next;
else list.head = list.tail = null;
} else {
list.head = p;
p.data = buf.slice(nb);
}
break;
}
++c;
}
list.length -= c;
return ret;
}
function endReadable(stream) {
var state = stream._readableState;
// If we get here before consuming all the bytes, then that is a
// bug in node. Should never happen.
if (state.length > 0) throw new Error('"endReadable()" called on non-empty stream');
if (!state.endEmitted) {
state.ended = true;
pna.nextTick(endReadableNT, state, stream);
}
}
function endReadableNT(state, stream) {
// Check that we didn't get one last unshift.
if (!state.endEmitted && state.length === 0) {
state.endEmitted = true;
stream.readable = false;
stream.emit('end');
}
}
function indexOf(xs, x) {
for (var i = 0, l = xs.length; i < l; i++) {
if (xs[i] === x) return i;
}
return -1;
}
}).call(this, require('_process'), typeof global !== "undefined" ? global : typeof self !== "undefined" ? self : typeof window !== "undefined" ? window : {})
}, {
"./_stream_duplex": 98,
"./internal/streams/BufferList": 103,
"./internal/streams/destroy": 104,
"./internal/streams/stream": 105,
"_process": 92,
"core-util-is": 14,
"events": 13,
"inherits": 80,
"isarray": 106,
"process-nextick-args": 91,
"safe-buffer": 110,
"string_decoder/": 107,
"util": 11
}],
101: [function (require, module, exports) {
// Copyright Joyent, Inc. and other Node contributors.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to permit
// persons to whom the Software is furnished to do so, subject to the
// following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
// USE OR OTHER DEALINGS IN THE SOFTWARE.
// a transform stream is a readable/writable stream where you do
// something with the data. Sometimes it's called a "filter",
// but that's not a great name for it, since that implies a thing where
// some bits pass through, and others are simply ignored. (That would
// be a valid example of a transform, of course.)
//
// While the output is causally related to the input, it's not a
// necessarily symmetric or synchronous transformation. For example,
// a zlib stream might take multiple plain-text writes(), and then
// emit a single compressed chunk some time in the future.
//
// Here's how this works:
//
// The Transform stream has all the aspects of the readable and writable
// stream classes. When you write(chunk), that calls _write(chunk,cb)
// internally, and returns false if there's a lot of pending writes
// buffered up. When you call read(), that calls _read(n) until
// there's enough pending readable data buffered up.
//
// In a transform stream, the written data is placed in a buffer. When
// _read(n) is called, it transforms the queued up data, calling the
// buffered _write cb's as it consumes chunks. If consuming a single
// written chunk would result in multiple output chunks, then the first
// outputted bit calls the readcb, and subsequent chunks just go into
// the read buffer, and will cause it to emit 'readable' if necessary.
//
// This way, back-pressure is actually determined by the reading side,
// since _read has to be called to start processing a new chunk. However,
// a pathological inflate type of transform can cause excessive buffering
// here. For example, imagine a stream where every byte of input is
// interpreted as an integer from 0-255, and then results in that many
// bytes of output. Writing the 4 bytes {ff,ff,ff,ff} would result in
// 1kb of data being output. In this case, you could write a very small
// amount of input, and end up with a very large amount of output. In
// such a pathological inflating mechanism, there'd be no way to tell
// the system to stop doing the transform. A single 4MB write could
// cause the system to run out of memory.
//
// However, even in such a pathological case, only a single written chunk
// would be consumed, and then the rest would wait (un-transformed) until
// the results of the previous transformed chunk were consumed.
'use strict';
module.exports = Transform;
var Duplex = require('./_stream_duplex');
/*<replacement>*/
var util = require('core-util-is');
util.inherits = require('inherits');
/*</replacement>*/
util.inherits(Transform, Duplex);
function afterTransform(er, data) {
var ts = this._transformState;
ts.transforming = false;
var cb = ts.writecb;
if (!cb) {
return this.emit('error', new Error('write callback called multiple times'));
}
ts.writechunk = null;
ts.writecb = null;
if (data != null) // single equals check for both `null` and `undefined`
this.push(data);
cb(er);
var rs = this._readableState;
rs.reading = false;
if (rs.needReadable || rs.length < rs.highWaterMark) {
this._read(rs.highWaterMark);
}
}
function Transform(options) {
if (!(this instanceof Transform)) return new Transform(options);
Duplex.call(this, options);
this._transformState = {
afterTransform: afterTransform.bind(this),
needTransform: false,
transforming: false,
writecb: null,
writechunk: null,
writeencoding: null
};
// start out asking for a readable event once data is transformed.
this._readableState.needReadable = true;
// we have implemented the _read method, and done the other things
// that Readable wants before the first _read call, so unset the
// sync guard flag.
this._readableState.sync = false;
if (options) {
if (typeof options.transform === 'function') this._transform = options.transform;
if (typeof options.flush === 'function') this._flush = options.flush;
}
// When the writable side finishes, then flush out anything remaining.
this.on('prefinish', prefinish);
}
function prefinish() {
var _this = this;
if (typeof this._flush === 'function') {
this._flush(function (er, data) {
done(_this, er, data);
});
} else {
done(this, null, null);
}
}
Transform.prototype.push = function (chunk, encoding) {
this._transformState.needTransform = false;
return Duplex.prototype.push.call(this, chunk, encoding);
};
// This is the part where you do stuff!
// override this function in implementation classes.
// 'chunk' is an input chunk.
//
// Call `push(newChunk)` to pass along transformed output
// to the readable side. You may call 'push' zero or more times.
//
// Call `cb(err)` when you are done with this chunk. If you pass
// an error, then that'll put the hurt on the whole operation. If you
// never call cb(), then you'll never get another chunk.
Transform.prototype._transform = function (chunk, encoding, cb) {
throw new Error('_transform() is not implemented');
};
Transform.prototype._write = function (chunk, encoding, cb) {
var ts = this._transformState;
ts.writecb = cb;
ts.writechunk = chunk;
ts.writeencoding = encoding;
if (!ts.transforming) {
var rs = this._readableState;
if (ts.needTransform || rs.needReadable || rs.length < rs.highWaterMark) this._read(rs.highWaterMark);
}
};
// Doesn't matter what the args are here.
// _transform does all the work.
// That we got here means that the readable side wants more data.
Transform.prototype._read = function (n) {
var ts = this._transformState;
if (ts.writechunk !== null && ts.writecb && !ts.transforming) {
ts.transforming = true;
this._transform(ts.writechunk, ts.writeencoding, ts.afterTransform);
} else {
// mark that we need a transform, so that any data that comes in
// will get processed, now that we've asked for it.
ts.needTransform = true;
}
};
Transform.prototype._destroy = function (err, cb) {
var _this2 = this;
Duplex.prototype._destroy.call(this, err, function (err2) {
cb(err2);
_this2.emit('close');
});
};
function done(stream, er, data) {
if (er) return stream.emit('error', er);
if (data != null) // single equals check for both `null` and `undefined`
stream.push(data);
// if there's nothing in the write buffer, then that means
// that nothing more will ever be provided
if (stream._writableState.length) throw new Error('Calling transform done when ws.length != 0');
if (stream._transformState.transforming) throw new Error('Calling transform done when still transforming');
return stream.push(null);
}
}, {
"./_stream_duplex": 98,
"core-util-is": 14,
"inherits": 80
}],
102: [function (require, module, exports) {
(function (process, global, setImmediate) {
// Copyright Joyent, Inc. and other Node contributors.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to permit
// persons to whom the Software is furnished to do so, subject to the
// following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
// USE OR OTHER DEALINGS IN THE SOFTWARE.
// A bit simpler than readable streams.
// Implement an async ._write(chunk, encoding, cb), and it'll handle all
// the drain event emission and buffering.
'use strict';
/*<replacement>*/
var pna = require('process-nextick-args');
/*</replacement>*/
module.exports = Writable;
/* <replacement> */
function WriteReq(chunk, encoding, cb) {
this.chunk = chunk;
this.encoding = encoding;
this.callback = cb;
this.next = null;
}
// It seems a linked list but it is not
// there will be only 2 of these for each stream
function CorkedRequest(state) {
var _this = this;
this.next = null;
this.entry = null;
this.finish = function () {
onCorkedFinish(_this, state);
};
}
/* </replacement> */
/*<replacement>*/
var asyncWrite = !process.browser && ['v0.10', 'v0.9.'].indexOf(process.version.slice(0, 5)) > -1 ? setImmediate : pna.nextTick;
/*</replacement>*/
/*<replacement>*/
var Duplex;
/*</replacement>*/
Writable.WritableState = WritableState;
/*<replacement>*/
var util = require('core-util-is');
util.inherits = require('inherits');
/*</replacement>*/
/*<replacement>*/
var internalUtil = {
deprecate: require('util-deprecate')
};
/*</replacement>*/
/*<replacement>*/
var Stream = require('./internal/streams/stream');
/*</replacement>*/
/*<replacement>*/
var Buffer = require('safe-buffer').Buffer;
var OurUint8Array = global.Uint8Array || function () {};
function _uint8ArrayToBuffer(chunk) {
return Buffer.from(chunk);
}
function _isUint8Array(obj) {
return Buffer.isBuffer(obj) || obj instanceof OurUint8Array;
}
/*</replacement>*/
var destroyImpl = require('./internal/streams/destroy');
util.inherits(Writable, Stream);
function nop() {}
function WritableState(options, stream) {
Duplex = Duplex || require('./_stream_duplex');
options = options || {};
// Duplex streams are both readable and writable, but share
// the same options object.
// However, some cases require setting options to different
// values for the readable and the writable sides of the duplex stream.
// These options can be provided separately as readableXXX and writableXXX.
var isDuplex = stream instanceof Duplex;
// object stream flag to indicate whether or not this stream
// contains buffers or objects.
this.objectMode = !!options.objectMode;
if (isDuplex) this.objectMode = this.objectMode || !!options.writableObjectMode;
// the point at which write() starts returning false
// Note: 0 is a valid value, means that we always return false if
// the entire buffer is not flushed immediately on write()
var hwm = options.highWaterMark;
var writableHwm = options.writableHighWaterMark;
var defaultHwm = this.objectMode ? 16 : 16 * 1024;
if (hwm || hwm === 0) this.highWaterMark = hwm;
else if (isDuplex && (writableHwm || writableHwm === 0)) this.highWaterMark = writableHwm;
else this.highWaterMark = defaultHwm;
// cast to ints.
this.highWaterMark = Math.floor(this.highWaterMark);
// if _final has been called
this.finalCalled = false;
// drain event flag.
this.needDrain = false;
// at the start of calling end()
this.ending = false;
// when end() has been called, and returned
this.ended = false;
// when 'finish' is emitted
this.finished = false;
// has it been destroyed
this.destroyed = false;
// should we decode strings into buffers before passing to _write?
// this is here so that some node-core streams can optimize string
// handling at a lower level.
var noDecode = options.decodeStrings === false;
this.decodeStrings = !noDecode;
// Crypto is kind of old and crusty. Historically, its default string
// encoding is 'binary' so we have to make this configurable.
// Everything else in the universe uses 'utf8', though.
this.defaultEncoding = options.defaultEncoding || 'utf8';
// not an actual buffer we keep track of, but a measurement
// of how much we're waiting to get pushed to some underlying
// socket or file.
this.length = 0;
// a flag to see when we're in the middle of a write.
this.writing = false;
// when true all writes will be buffered until .uncork() call
this.corked = 0;
// a flag to be able to tell if the onwrite cb is called immediately,
// or on a later tick. We set this to true at first, because any
// actions that shouldn't happen until "later" should generally also
// not happen before the first write call.
this.sync = true;
// a flag to know if we're processing previously buffered items, which
// may call the _write() callback in the same tick, so that we don't
// end up in an overlapped onwrite situation.
this.bufferProcessing = false;
// the callback that's passed to _write(chunk,cb)
this.onwrite = function (er) {
onwrite(stream, er);
};
// the callback that the user supplies to write(chunk,encoding,cb)
this.writecb = null;
// the amount that is being written when _write is called.
this.writelen = 0;
this.bufferedRequest = null;
this.lastBufferedRequest = null;
// number of pending user-supplied write callbacks
// this must be 0 before 'finish' can be emitted
this.pendingcb = 0;
// emit prefinish if the only thing we're waiting for is _write cbs
// This is relevant for synchronous Transform streams
this.prefinished = false;
// True if the error was already emitted and should not be thrown again
this.errorEmitted = false;
// count buffered requests
this.bufferedRequestCount = 0;
// allocate the first CorkedRequest, there is always
// one allocated and free to use, and we maintain at most two
this.corkedRequestsFree = new CorkedRequest(this);
}
WritableState.prototype.getBuffer = function getBuffer() {
var current = this.bufferedRequest;
var out = [];
while (current) {
out.push(current);
current = current.next;
}
return out;
};
(function () {
try {
Object.defineProperty(WritableState.prototype, 'buffer', {
get: internalUtil.deprecate(function () {
return this.getBuffer();
}, '_writableState.buffer is deprecated. Use _writableState.getBuffer ' + 'instead.', 'DEP0003')
});
} catch (_) {}
})();
// Test _writableState for inheritance to account for Duplex streams,
// whose prototype chain only points to Readable.
var realHasInstance;
if (typeof Symbol === 'function' && Symbol.hasInstance && typeof Function.prototype[Symbol.hasInstance] === 'function') {
realHasInstance = Function.prototype[Symbol.hasInstance];
Object.defineProperty(Writable, Symbol.hasInstance, {
value: function (object) {
if (realHasInstance.call(this, object)) return true;
if (this !== Writable) return false;
return object && object._writableState instanceof WritableState;
}
});
} else {
realHasInstance = function (object) {
return object instanceof this;
};
}
function Writable(options) {
Duplex = Duplex || require('./_stream_duplex');
// Writable ctor is applied to Duplexes, too.
// `realHasInstance` is necessary because using plain `instanceof`
// would return false, as no `_writableState` property is attached.
// Trying to use the custom `instanceof` for Writable here will also break the
// Node.js LazyTransform implementation, which has a non-trivial getter for
// `_writableState` that would lead to infinite recursion.
if (!realHasInstance.call(Writable, this) && !(this instanceof Duplex)) {
return new Writable(options);
}
this._writableState = new WritableState(options, this);
// legacy.
this.writable = true;
if (options) {
if (typeof options.write === 'function') this._write = options.write;
if (typeof options.writev === 'function') this._writev = options.writev;
if (typeof options.destroy === 'function') this._destroy = options.destroy;
if (typeof options.final === 'function') this._final = options.final;
}
Stream.call(this);
}
// Otherwise people can pipe Writable streams, which is just wrong.
Writable.prototype.pipe = function () {
this.emit('error', new Error('Cannot pipe, not readable'));
};
function writeAfterEnd(stream, cb) {
var er = new Error('write after end');
// TODO: defer error events consistently everywhere, not just the cb
stream.emit('error', er);
pna.nextTick(cb, er);
}
// Checks that a user-supplied chunk is valid, especially for the particular
// mode the stream is in. Currently this means that `null` is never accepted
// and undefined/non-string values are only allowed in object mode.
function validChunk(stream, state, chunk, cb) {
var valid = true;
var er = false;
if (chunk === null) {
er = new TypeError('May not write null values to stream');
} else if (typeof chunk !== 'string' && chunk !== undefined && !state.objectMode) {
er = new TypeError('Invalid non-string/buffer chunk');
}
if (er) {
stream.emit('error', er);
pna.nextTick(cb, er);
valid = false;
}
return valid;
}
Writable.prototype.write = function (chunk, encoding, cb) {
var state = this._writableState;
var ret = false;
var isBuf = !state.objectMode && _isUint8Array(chunk);
if (isBuf && !Buffer.isBuffer(chunk)) {
chunk = _uint8ArrayToBuffer(chunk);
}
if (typeof encoding === 'function') {
cb = encoding;
encoding = null;
}
if (isBuf) encoding = 'buffer';
else if (!encoding) encoding = state.defaultEncoding;
if (typeof cb !== 'function') cb = nop;
if (state.ended) writeAfterEnd(this, cb);
else if (isBuf || validChunk(this, state, chunk, cb)) {
state.pendingcb++;
ret = writeOrBuffer(this, state, isBuf, chunk, encoding, cb);
}
return ret;
};
Writable.prototype.cork = function () {
var state = this._writableState;
state.corked++;
};
Writable.prototype.uncork = function () {
var state = this._writableState;
if (state.corked) {
state.corked--;
if (!state.writing && !state.corked && !state.finished && !state.bufferProcessing && state.bufferedRequest) clearBuffer(this, state);
}
};
Writable.prototype.setDefaultEncoding = function setDefaultEncoding(encoding) {
// node::ParseEncoding() requires lower case.
if (typeof encoding === 'string') encoding = encoding.toLowerCase();
if (!(['hex', 'utf8', 'utf-8', 'ascii', 'binary', 'base64', 'ucs2', 'ucs-2', 'utf16le', 'utf-16le', 'raw'].indexOf((encoding + '').toLowerCase()) > -1)) throw new TypeError('Unknown encoding: ' + encoding);
this._writableState.defaultEncoding = encoding;
return this;
};
function decodeChunk(state, chunk, encoding) {
if (!state.objectMode && state.decodeStrings !== false && typeof chunk === 'string') {
chunk = Buffer.from(chunk, encoding);
}
return chunk;
}
Object.defineProperty(Writable.prototype, 'writableHighWaterMark', {
// making it explicit this property is not enumerable
// because otherwise some prototype manipulation in
// userland will fail
enumerable: false,
get: function () {
return this._writableState.highWaterMark;
}
});
// if we're already writing something, then just put this
// in the queue, and wait our turn. Otherwise, call _write
// If we return false, then we need a drain event, so set that flag.
function writeOrBuffer(stream, state, isBuf, chunk, encoding, cb) {
if (!isBuf) {
var newChunk = decodeChunk(state, chunk, encoding);
if (chunk !== newChunk) {
isBuf = true;
encoding = 'buffer';
chunk = newChunk;
}
}
var len = state.objectMode ? 1 : chunk.length;
state.length += len;
var ret = state.length < state.highWaterMark;
// we must ensure that previous needDrain will not be reset to false.
if (!ret) state.needDrain = true;
if (state.writing || state.corked) {
var last = state.lastBufferedRequest;
state.lastBufferedRequest = {
chunk: chunk,
encoding: encoding,
isBuf: isBuf,
callback: cb,
next: null
};
if (last) {
last.next = state.lastBufferedRequest;
} else {
state.bufferedRequest = state.lastBufferedRequest;
}
state.bufferedRequestCount += 1;
} else {
doWrite(stream, state, false, len, chunk, encoding, cb);
}
return ret;
}
function doWrite(stream, state, writev, len, chunk, encoding, cb) {
state.writelen = len;
state.writecb = cb;
state.writing = true;
state.sync = true;
if (writev) stream._writev(chunk, state.onwrite);
else stream._write(chunk, encoding, state.onwrite);
state.sync = false;
}
function onwriteError(stream, state, sync, er, cb) {
--state.pendingcb;
if (sync) {
// defer the callback if we are being called synchronously
// to avoid piling up things on the stack
pna.nextTick(cb, er);
// this can emit finish, and it will always happen
// after error
pna.nextTick(finishMaybe, stream, state);
stream._writableState.errorEmitted = true;
stream.emit('error', er);
} else {
// the caller expect this to happen before if
// it is async
cb(er);
stream._writableState.errorEmitted = true;
stream.emit('error', er);
// this can emit finish, but finish must
// always follow error
finishMaybe(stream, state);
}
}
function onwriteStateUpdate(state) {
state.writing = false;
state.writecb = null;
state.length -= state.writelen;
state.writelen = 0;
}
function onwrite(stream, er) {
var state = stream._writableState;
var sync = state.sync;
var cb = state.writecb;
onwriteStateUpdate(state);
if (er) onwriteError(stream, state, sync, er, cb);
else {
// Check if we're actually ready to finish, but don't emit yet
var finished = needFinish(state);
if (!finished && !state.corked && !state.bufferProcessing && state.bufferedRequest) {
clearBuffer(stream, state);
}
if (sync) {
/*<replacement>*/
asyncWrite(afterWrite, stream, state, finished, cb);
/*</replacement>*/
} else {
afterWrite(stream, state, finished, cb);
}
}
}
function afterWrite(stream, state, finished, cb) {
if (!finished) onwriteDrain(stream, state);
state.pendingcb--;
cb();
finishMaybe(stream, state);
}
// Must force callback to be called on nextTick, so that we don't
// emit 'drain' before the write() consumer gets the 'false' return
// value, and has a chance to attach a 'drain' listener.
function onwriteDrain(stream, state) {
if (state.length === 0 && state.needDrain) {
state.needDrain = false;
stream.emit('drain');
}
}
// if there's something in the buffer waiting, then process it
function clearBuffer(stream, state) {
state.bufferProcessing = true;
var entry = state.bufferedRequest;
if (stream._writev && entry && entry.next) {
// Fast case, write everything using _writev()
var l = state.bufferedRequestCount;
var buffer = new Array(l);
var holder = state.corkedRequestsFree;
holder.entry = entry;
var count = 0;
var allBuffers = true;
while (entry) {
buffer[count] = entry;
if (!entry.isBuf) allBuffers = false;
entry = entry.next;
count += 1;
}
buffer.allBuffers = allBuffers;
doWrite(stream, state, true, state.length, buffer, '', holder.finish);
// doWrite is almost always async, defer these to save a bit of time
// as the hot path ends with doWrite
state.pendingcb++;
state.lastBufferedRequest = null;
if (holder.next) {
state.corkedRequestsFree = holder.next;
holder.next = null;
} else {
state.corkedRequestsFree = new CorkedRequest(state);
}
state.bufferedRequestCount = 0;
} else {
// Slow case, write chunks one-by-one
while (entry) {
var chunk = entry.chunk;
var encoding = entry.encoding;
var cb = entry.callback;
var len = state.objectMode ? 1 : chunk.length;
doWrite(stream, state, false, len, chunk, encoding, cb);
entry = entry.next;
state.bufferedRequestCount--;
// if we didn't call the onwrite immediately, then
// it means that we need to wait until it does.
// also, that means that the chunk and cb are currently
// being processed, so move the buffer counter past them.
if (state.writing) {
break;
}
}
if (entry === null) state.lastBufferedRequest = null;
}
state.bufferedRequest = entry;
state.bufferProcessing = false;
}
Writable.prototype._write = function (chunk, encoding, cb) {
cb(new Error('_write() is not implemented'));
};
Writable.prototype._writev = null;
Writable.prototype.end = function (chunk, encoding, cb) {
var state = this._writableState;
if (typeof chunk === 'function') {
cb = chunk;
chunk = null;
encoding = null;
} else if (typeof encoding === 'function') {
cb = encoding;
encoding = null;
}
if (chunk !== null && chunk !== undefined) this.write(chunk, encoding);
// .end() fully uncorks
if (state.corked) {
state.corked = 1;
this.uncork();
}
// ignore unnecessary end() calls.
if (!state.ending && !state.finished) endWritable(this, state, cb);
};
function needFinish(state) {
return state.ending && state.length === 0 && state.bufferedRequest === null && !state.finished && !state.writing;
}
function callFinal(stream, state) {
stream._final(function (err) {
state.pendingcb--;
if (err) {
stream.emit('error', err);
}
state.prefinished = true;
stream.emit('prefinish');
finishMaybe(stream, state);
});
}
function prefinish(stream, state) {
if (!state.prefinished && !state.finalCalled) {
if (typeof stream._final === 'function') {
state.pendingcb++;
state.finalCalled = true;
pna.nextTick(callFinal, stream, state);
} else {
state.prefinished = true;
stream.emit('prefinish');
}
}
}
function finishMaybe(stream, state) {
var need = needFinish(state);
if (need) {
prefinish(stream, state);
if (state.pendingcb === 0) {
state.finished = true;
stream.emit('finish');
}
}
return need;
}
function endWritable(stream, state, cb) {
state.ending = true;
finishMaybe(stream, state);
if (cb) {
if (state.finished) pna.nextTick(cb);
else stream.once('finish', cb);
}
state.ended = true;
stream.writable = false;
}
function onCorkedFinish(corkReq, state, err) {
var entry = corkReq.entry;
corkReq.entry = null;
while (entry) {
var cb = entry.callback;
state.pendingcb--;
cb(err);
entry = entry.next;
}
if (state.corkedRequestsFree) {
state.corkedRequestsFree.next = corkReq;
} else {
state.corkedRequestsFree = corkReq;
}
}
Object.defineProperty(Writable.prototype, 'destroyed', {
get: function () {
if (this._writableState === undefined) {
return false;
}
return this._writableState.destroyed;
},
set: function (value) {
// we ignore the value if the stream
// has not been initialized yet
if (!this._writableState) {
return;
}
// backward compatibility, the user is explicitly
// managing destroyed
this._writableState.destroyed = value;
}
});
Writable.prototype.destroy = destroyImpl.destroy;
Writable.prototype._undestroy = destroyImpl.undestroy;
Writable.prototype._destroy = function (err, cb) {
this.end();
cb(err);
};
}).call(this, require('_process'), typeof global !== "undefined" ? global : typeof self !== "undefined" ? self : typeof window !== "undefined" ? window : {}, require("timers").setImmediate)
}, {
"./_stream_duplex": 98,
"./internal/streams/destroy": 104,
"./internal/streams/stream": 105,
"_process": 92,
"core-util-is": 14,
"inherits": 80,
"process-nextick-args": 91,
"safe-buffer": 110,
"timers": 112,
"util-deprecate": 115
}],
103: [function (require, module, exports) {
'use strict';
function _classCallCheck(instance, Constructor) {
if (!(instance instanceof Constructor)) {
throw new TypeError("Cannot call a class as a function");
}
}
var Buffer = require('safe-buffer').Buffer;
var util = require('util');
function copyBuffer(src, target, offset) {
src.copy(target, offset);
}
module.exports = function () {
function BufferList() {
_classCallCheck(this, BufferList);
this.head = null;
this.tail = null;
this.length = 0;
}
BufferList.prototype.push = function push(v) {
var entry = {
data: v,
next: null
};
if (this.length > 0) this.tail.next = entry;
else this.head = entry;
this.tail = entry;
++this.length;
};
BufferList.prototype.unshift = function unshift(v) {
var entry = {
data: v,
next: this.head
};
if (this.length === 0) this.tail = entry;
this.head = entry;
++this.length;
};
BufferList.prototype.shift = function shift() {
if (this.length === 0) return;
var ret = this.head.data;
if (this.length === 1) this.head = this.tail = null;
else this.head = this.head.next;
--this.length;
return ret;
};
BufferList.prototype.clear = function clear() {
this.head = this.tail = null;
this.length = 0;
};
BufferList.prototype.join = function join(s) {
if (this.length === 0) return '';
var p = this.head;
var ret = '' + p.data;
while (p = p.next) {
ret += s + p.data;
}
return ret;
};
BufferList.prototype.concat = function concat(n) {
if (this.length === 0) return Buffer.alloc(0);
if (this.length === 1) return this.head.data;
var ret = Buffer.allocUnsafe(n >>> 0);
var p = this.head;
var i = 0;
while (p) {
copyBuffer(p.data, ret, i);
i += p.data.length;
p = p.next;
}
return ret;
};
return BufferList;
}();
if (util && util.inspect && util.inspect.custom) {
module.exports.prototype[util.inspect.custom] = function () {
var obj = util.inspect({
length: this.length
});
return this.constructor.name + ' ' + obj;
};
}
}, {
"safe-buffer": 110,
"util": 11
}],
104: [function (require, module, exports) {
'use strict';
/*<replacement>*/
var pna = require('process-nextick-args');
/*</replacement>*/
// undocumented cb() API, needed for core, not for public API
function destroy(err, cb) {
var _this = this;
var readableDestroyed = this._readableState && this._readableState.destroyed;
var writableDestroyed = this._writableState && this._writableState.destroyed;
if (readableDestroyed || writableDestroyed) {
if (cb) {
cb(err);
} else if (err && (!this._writableState || !this._writableState.errorEmitted)) {
pna.nextTick(emitErrorNT, this, err);
}
return this;
}
// we set destroyed to true before firing error callbacks in order
// to make it re-entrance safe in case destroy() is called within callbacks
if (this._readableState) {
this._readableState.destroyed = true;
}
// if this is a duplex stream mark the writable part as destroyed as well
if (this._writableState) {
this._writableState.destroyed = true;
}
this._destroy(err || null, function (err) {
if (!cb && err) {
pna.nextTick(emitErrorNT, _this, err);
if (_this._writableState) {
_this._writableState.errorEmitted = true;
}
} else if (cb) {
cb(err);
}
});
return this;
}
function undestroy() {
if (this._readableState) {
this._readableState.destroyed = false;
this._readableState.reading = false;
this._readableState.ended = false;
this._readableState.endEmitted = false;
}
if (this._writableState) {
this._writableState.destroyed = false;
this._writableState.ended = false;
this._writableState.ending = false;
this._writableState.finished = false;
this._writableState.errorEmitted = false;
}
}
function emitErrorNT(self, err) {
self.emit('error', err);
}
module.exports = {
destroy: destroy,
undestroy: undestroy
};
}, {
"process-nextick-args": 91
}],
105: [function (require, module, exports) {
module.exports = require('events').EventEmitter;
}, {
"events": 13
}],
106: [function (require, module, exports) {
var toString = {}.toString;
module.exports = Array.isArray || function (arr) {
return toString.call(arr) == '[object Array]';
};
}, {}],
107: [function (require, module, exports) {
// Copyright Joyent, Inc. and other Node contributors.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to permit
// persons to whom the Software is furnished to do so, subject to the
// following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
// USE OR OTHER DEALINGS IN THE SOFTWARE.
'use strict';
/*<replacement>*/
var Buffer = require('safe-buffer').Buffer;
/*</replacement>*/
var isEncoding = Buffer.isEncoding || function (encoding) {
encoding = '' + encoding;
switch (encoding && encoding.toLowerCase()) {
case 'hex':
case 'utf8':
case 'utf-8':
case 'ascii':
case 'binary':
case 'base64':
case 'ucs2':
case 'ucs-2':
case 'utf16le':
case 'utf-16le':
case 'raw':
return true;
default:
return false;
}
};
function _normalizeEncoding(enc) {
if (!enc) return 'utf8';
var retried;
while (true) {
switch (enc) {
case 'utf8':
case 'utf-8':
return 'utf8';
case 'ucs2':
case 'ucs-2':
case 'utf16le':
case 'utf-16le':
return 'utf16le';
case 'latin1':
case 'binary':
return 'latin1';
case 'base64':
case 'ascii':
case 'hex':
return enc;
default:
if (retried) return; // undefined
enc = ('' + enc).toLowerCase();
retried = true;
}
}
};
// Do not cache `Buffer.isEncoding` when checking encoding names as some
// modules monkey-patch it to support additional encodings
function normalizeEncoding(enc) {
var nenc = _normalizeEncoding(enc);
if (typeof nenc !== 'string' && (Buffer.isEncoding === isEncoding || !isEncoding(enc))) throw new Error('Unknown encoding: ' + enc);
return nenc || enc;
}
// StringDecoder provides an interface for efficiently splitting a series of
// buffers into a series of JS strings without breaking apart multi-byte
// characters.
exports.StringDecoder = StringDecoder;
function StringDecoder(encoding) {
this.encoding = normalizeEncoding(encoding);
var nb;
switch (this.encoding) {
case 'utf16le':
this.text = utf16Text;
this.end = utf16End;
nb = 4;
break;
case 'utf8':
this.fillLast = utf8FillLast;
nb = 4;
break;
case 'base64':
this.text = base64Text;
this.end = base64End;
nb = 3;
break;
default:
this.write = simpleWrite;
this.end = simpleEnd;
return;
}
this.lastNeed = 0;
this.lastTotal = 0;
this.lastChar = Buffer.allocUnsafe(nb);
}
StringDecoder.prototype.write = function (buf) {
if (buf.length === 0) return '';
var r;
var i;
if (this.lastNeed) {
r = this.fillLast(buf);
if (r === undefined) return '';
i = this.lastNeed;
this.lastNeed = 0;
} else {
i = 0;
}
if (i < buf.length) return r ? r + this.text(buf, i) : this.text(buf, i);
return r || '';
};
StringDecoder.prototype.end = utf8End;
// Returns only complete characters in a Buffer
StringDecoder.prototype.text = utf8Text;
// Attempts to complete a partial non-UTF-8 character using bytes from a Buffer
StringDecoder.prototype.fillLast = function (buf) {
if (this.lastNeed <= buf.length) {
buf.copy(this.lastChar, this.lastTotal - this.lastNeed, 0, this.lastNeed);
return this.lastChar.toString(this.encoding, 0, this.lastTotal);
}
buf.copy(this.lastChar, this.lastTotal - this.lastNeed, 0, buf.length);
this.lastNeed -= buf.length;
};
// Checks the type of a UTF-8 byte, whether it's ASCII, a leading byte, or a
// continuation byte. If an invalid byte is detected, -2 is returned.
function utf8CheckByte(byte) {
if (byte <= 0x7F) return 0;
else if (byte >> 5 === 0x06) return 2;
else if (byte >> 4 === 0x0E) return 3;
else if (byte >> 3 === 0x1E) return 4;
return byte >> 6 === 0x02 ? -1 : -2;
}
// Checks at most 3 bytes at the end of a Buffer in order to detect an
// incomplete multi-byte UTF-8 character. The total number of bytes (2, 3, or 4)
// needed to complete the UTF-8 character (if applicable) are returned.
function utf8CheckIncomplete(self, buf, i) {
var j = buf.length - 1;
if (j < i) return 0;
var nb = utf8CheckByte(buf[j]);
if (nb >= 0) {
if (nb > 0) self.lastNeed = nb - 1;
return nb;
}
if (--j < i || nb === -2) return 0;
nb = utf8CheckByte(buf[j]);
if (nb >= 0) {
if (nb > 0) self.lastNeed = nb - 2;
return nb;
}
if (--j < i || nb === -2) return 0;
nb = utf8CheckByte(buf[j]);
if (nb >= 0) {
if (nb > 0) {
if (nb === 2) nb = 0;
else self.lastNeed = nb - 3;
}
return nb;
}
return 0;
}
// Validates as many continuation bytes for a multi-byte UTF-8 character as
// needed or are available. If we see a non-continuation byte where we expect
// one, we "replace" the validated continuation bytes we've seen so far with
// a single UTF-8 replacement character ('\ufffd'), to match v8's UTF-8 decoding
// behavior. The continuation byte check is included three times in the case
// where all of the continuation bytes for a character exist in the same buffer.
// It is also done this way as a slight performance increase instead of using a
// loop.
function utf8CheckExtraBytes(self, buf, p) {
if ((buf[0] & 0xC0) !== 0x80) {
self.lastNeed = 0;
return '\ufffd';
}
if (self.lastNeed > 1 && buf.length > 1) {
if ((buf[1] & 0xC0) !== 0x80) {
self.lastNeed = 1;
return '\ufffd';
}
if (self.lastNeed > 2 && buf.length > 2) {
if ((buf[2] & 0xC0) !== 0x80) {
self.lastNeed = 2;
return '\ufffd';
}
}
}
}
// Attempts to complete a multi-byte UTF-8 character using bytes from a Buffer.
function utf8FillLast(buf) {
var p = this.lastTotal - this.lastNeed;
var r = utf8CheckExtraBytes(this, buf, p);
if (r !== undefined) return r;
if (this.lastNeed <= buf.length) {
buf.copy(this.lastChar, p, 0, this.lastNeed);
return this.lastChar.toString(this.encoding, 0, this.lastTotal);
}
buf.copy(this.lastChar, p, 0, buf.length);
this.lastNeed -= buf.length;
}
// Returns all complete UTF-8 characters in a Buffer. If the Buffer ended on a
// partial character, the character's bytes are buffered until the required
// number of bytes are available.
function utf8Text(buf, i) {
var total = utf8CheckIncomplete(this, buf, i);
if (!this.lastNeed) return buf.toString('utf8', i);
this.lastTotal = total;
var end = buf.length - (total - this.lastNeed);
buf.copy(this.lastChar, 0, end);
return buf.toString('utf8', i, end);
}
// For UTF-8, a replacement character is added when ending on a partial
// character.
function utf8End(buf) {
var r = buf && buf.length ? this.write(buf) : '';
if (this.lastNeed) return r + '\ufffd';
return r;
}
// UTF-16LE typically needs two bytes per character, but even if we have an even
// number of bytes available, we need to check if we end on a leading/high
// surrogate. In that case, we need to wait for the next two bytes in order to
// decode the last character properly.
function utf16Text(buf, i) {
if ((buf.length - i) % 2 === 0) {
var r = buf.toString('utf16le', i);
if (r) {
var c = r.charCodeAt(r.length - 1);
if (c >= 0xD800 && c <= 0xDBFF) {
this.lastNeed = 2;
this.lastTotal = 4;
this.lastChar[0] = buf[buf.length - 2];
this.lastChar[1] = buf[buf.length - 1];
return r.slice(0, -1);
}
}
return r;
}
this.lastNeed = 1;
this.lastTotal = 2;
this.lastChar[0] = buf[buf.length - 1];
return buf.toString('utf16le', i, buf.length - 1);
}
// For UTF-16LE we do not explicitly append special replacement characters if we
// end on a partial character, we simply let v8 handle that.
function utf16End(buf) {
var r = buf && buf.length ? this.write(buf) : '';
if (this.lastNeed) {
var end = this.lastTotal - this.lastNeed;
return r + this.lastChar.toString('utf16le', 0, end);
}
return r;
}
function base64Text(buf, i) {
var n = (buf.length - i) % 3;
if (n === 0) return buf.toString('base64', i);
this.lastNeed = 3 - n;
this.lastTotal = 3;
if (n === 1) {
this.lastChar[0] = buf[buf.length - 1];
} else {
this.lastChar[0] = buf[buf.length - 2];
this.lastChar[1] = buf[buf.length - 1];
}
return buf.toString('base64', i, buf.length - n);
}
function base64End(buf) {
var r = buf && buf.length ? this.write(buf) : '';
if (this.lastNeed) return r + this.lastChar.toString('base64', 0, 3 - this.lastNeed);
return r;
}
// Pass bytes on through for single-byte encodings (e.g. ascii, latin1, hex)
function simpleWrite(buf) {
return buf.toString(this.encoding);
}
function simpleEnd(buf) {
return buf && buf.length ? this.write(buf) : '';
}
}, {
"safe-buffer": 110
}],
108: [function (require, module, exports) {
exports = module.exports = require('./lib/_stream_readable.js');
exports.Stream = exports;
exports.Readable = exports;
exports.Writable = require('./lib/_stream_writable.js');
exports.Duplex = require('./lib/_stream_duplex.js');
exports.Transform = require('./lib/_stream_transform.js');
exports.PassThrough = require('./lib/_stream_passthrough.js');
}, {
"./lib/_stream_duplex.js": 98,
"./lib/_stream_passthrough.js": 99,
"./lib/_stream_readable.js": 100,
"./lib/_stream_transform.js": 101,
"./lib/_stream_writable.js": 102
}],
109: [function (require, module, exports) {
'use strict'
function ReInterval(callback, interval, args) {
var self = this;
this._callback = callback;
this._args = args;
this._interval = setInterval(callback, interval, this._args);
this.reschedule = function (interval) {
// if no interval entered, use the interval passed in on creation
if (!interval)
interval = self._interval;
if (self._interval)
clearInterval(self._interval);
self._interval = setInterval(self._callback, interval, self._args);
};
this.clear = function () {
if (self._interval) {
clearInterval(self._interval);
self._interval = undefined;
}
};
this.destroy = function () {
if (self._interval) {
clearInterval(self._interval);
}
self._callback = undefined;
self._interval = undefined;
self._args = undefined;
};
}
function reInterval() {
if (typeof arguments[0] !== 'function')
throw new Error('callback needed');
if (typeof arguments[1] !== 'number')
throw new Error('interval needed');
var args;
if (arguments.length > 0) {
args = new Array(arguments.length - 2);
for (var i = 0; i < args.length; i++) {
args[i] = arguments[i + 2];
}
}
return new ReInterval(arguments[0], arguments[1], args);
}
module.exports = reInterval;
}, {}],
110: [function (require, module, exports) {
/* eslint-disable node/no-deprecated-api */
var buffer = require('buffer')
var Buffer = buffer.Buffer
// alternative to using Object.keys for old browsers
function copyProps(src, dst) {
for (var key in src) {
dst[key] = src[key]
}
}
if (Buffer.from && Buffer.alloc && Buffer.allocUnsafe && Buffer.allocUnsafeSlow) {
module.exports = buffer
} else {
// Copy properties from require('buffer')
copyProps(buffer, exports)
exports.Buffer = SafeBuffer
}
function SafeBuffer(arg, encodingOrOffset, length) {
return Buffer(arg, encodingOrOffset, length)
}
// Copy static methods from Buffer
copyProps(Buffer, SafeBuffer)
SafeBuffer.from = function (arg, encodingOrOffset, length) {
if (typeof arg === 'number') {
throw new TypeError('Argument must not be a number')
}
return Buffer(arg, encodingOrOffset, length)
}
SafeBuffer.alloc = function (size, fill, encoding) {
if (typeof size !== 'number') {
throw new TypeError('Argument must be a number')
}
var buf = Buffer(size)
if (fill !== undefined) {
if (typeof encoding === 'string') {
buf.fill(fill, encoding)
} else {
buf.fill(fill)
}
} else {
buf.fill(0)
}
return buf
}
SafeBuffer.allocUnsafe = function (size) {
if (typeof size !== 'number') {
throw new TypeError('Argument must be a number')
}
return Buffer(size)
}
SafeBuffer.allocUnsafeSlow = function (size) {
if (typeof size !== 'number') {
throw new TypeError('Argument must be a number')
}
return buffer.SlowBuffer(size)
}
}, {
"buffer": 12
}],
111: [function (require, module, exports) {
module.exports = shift
function shift(stream) {
var rs = stream._readableState
if (!rs) return null
return rs.objectMode ? stream.read() : stream.read(getStateLength(rs))
}
function getStateLength(state) {
if (state.buffer.length) {
// Since node 6.3.0 state.buffer is a BufferList not an array
if (state.buffer.head) {
return state.buffer.head.data.length
}
return state.buffer[0].length
}
return state.length
}
}, {}],
112: [function (require, module, exports) {
(function (setImmediate, clearImmediate) {
var nextTick = require('process/browser.js').nextTick;
var apply = Function.prototype.apply;
var slice = Array.prototype.slice;
var immediateIds = {};
var nextImmediateId = 0;
// DOM APIs, for completeness
exports.setTimeout = function () {
return new Timeout(apply.call(setTimeout, window, arguments), clearTimeout);
};
exports.setInterval = function () {
return new Timeout(apply.call(setInterval, window, arguments), clearInterval);
};
exports.clearTimeout =
exports.clearInterval = function (timeout) {
timeout.close();
};
function Timeout(id, clearFn) {
this._id = id;
this._clearFn = clearFn;
}
Timeout.prototype.unref = Timeout.prototype.ref = function () {};
Timeout.prototype.close = function () {
this._clearFn.call(window, this._id);
};
// Does not start the time, just sets up the members needed.
exports.enroll = function (item, msecs) {
clearTimeout(item._idleTimeoutId);
item._idleTimeout = msecs;
};
exports.unenroll = function (item) {
clearTimeout(item._idleTimeoutId);
item._idleTimeout = -1;
};
exports._unrefActive = exports.active = function (item) {
clearTimeout(item._idleTimeoutId);
var msecs = item._idleTimeout;
if (msecs >= 0) {
item._idleTimeoutId = setTimeout(function onTimeout() {
if (item._onTimeout)
item._onTimeout();
}, msecs);
}
};
// That's not how node.js implements it but the exposed api is the same.
exports.setImmediate = typeof setImmediate === "function" ? setImmediate : function (fn) {
var id = nextImmediateId++;
var args = arguments.length < 2 ? false : slice.call(arguments, 1);
immediateIds[id] = true;
nextTick(function onNextTick() {
if (immediateIds[id]) {
// fn.call() is faster so we optimize for the common use-case
// @see http://jsperf.com/call-apply-segu
if (args) {
fn.apply(null, args);
} else {
fn.call(null);
}
// Prevent ids from leaking
exports.clearImmediate(id);
}
});
return id;
};
exports.clearImmediate = typeof clearImmediate === "function" ? clearImmediate : function (id) {
delete immediateIds[id];
};
}).call(this, require("timers").setImmediate, require("timers").clearImmediate)
}, {
"process/browser.js": 92,
"timers": 112
}],
113: [function (require, module, exports) {
// Copyright Joyent, Inc. and other Node contributors.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to permit
// persons to whom the Software is furnished to do so, subject to the
// following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
// USE OR OTHER DEALINGS IN THE SOFTWARE.
'use strict';
var punycode = require('punycode');
var util = require('./util');
exports.parse = urlParse;
exports.resolve = urlResolve;
exports.resolveObject = urlResolveObject;
exports.format = urlFormat;
exports.Url = Url;
function Url() {
this.protocol = null;
this.slashes = null;
this.auth = null;
this.host = null;
this.port = null;
this.hostname = null;
this.hash = null;
this.search = null;
this.query = null;
this.pathname = null;
this.path = null;
this.href = null;
}
// Reference: RFC 3986, RFC 1808, RFC 2396
// define these here so at least they only have to be
// compiled once on the first module load.
var protocolPattern = /^([a-z0-9.+-]+:)/i,
portPattern = /:[0-9]*$/,
// Special case for a simple path URL
simplePathPattern = /^(\/\/?(?!\/)[^\?\s]*)(\?[^\s]*)?$/,
// RFC 2396: characters reserved for delimiting URLs.
// We actually just auto-escape these.
delims = ['<', '>', '"', '`', ' ', '\r', '\n', '\t'],
// RFC 2396: characters not allowed for various reasons.
unwise = ['{', '}', '|', '\\', '^', '`'].concat(delims),
// Allowed by RFCs, but cause of XSS attacks. Always escape these.
autoEscape = ['\''].concat(unwise),
// Characters that are never ever allowed in a hostname.
// Note that any invalid chars are also handled, but these
// are the ones that are *expected* to be seen, so we fast-path
// them.
nonHostChars = ['%', '/', '?', ';', '#'].concat(autoEscape),
hostEndingChars = ['/', '?', '#'],
hostnameMaxLen = 255,
hostnamePartPattern = /^[+a-z0-9A-Z_-]{0,63}$/,
hostnamePartStart = /^([+a-z0-9A-Z_-]{0,63})(.*)$/,
// protocols that can allow "unsafe" and "unwise" chars.
unsafeProtocol = {
'javascript': true,
'javascript:': true
},
// protocols that never have a hostname.
hostlessProtocol = {
'javascript': true,
'javascript:': true
},
// protocols that always contain a // bit.
slashedProtocol = {
'http': true,
'https': true,
'ftp': true,
'gopher': true,
'file': true,
'http:': true,
'https:': true,
'ftp:': true,
'gopher:': true,
'file:': true
},
querystring = require('querystring');
function urlParse(url, parseQueryString, slashesDenoteHost) {
if (url && util.isObject(url) && url instanceof Url) return url;
var u = new Url;
u.parse(url, parseQueryString, slashesDenoteHost);
return u;
}
Url.prototype.parse = function (url, parseQueryString, slashesDenoteHost) {
if (!util.isString(url)) {
throw new TypeError("Parameter 'url' must be a string, not " + typeof url);
}
// Copy chrome, IE, opera backslash-handling behavior.
// Back slashes before the query string get converted to forward slashes
// See: https://code.google.com/p/chromium/issues/detail?id=25916
var queryIndex = url.indexOf('?'),
splitter =
(queryIndex !== -1 && queryIndex < url.indexOf('#')) ? '?' : '#',
uSplit = url.split(splitter),
slashRegex = /\\/g;
uSplit[0] = uSplit[0].replace(slashRegex, '/');
url = uSplit.join(splitter);
var rest = url;
// trim before proceeding.
// This is to support parse stuff like " http://foo.com \n"
rest = rest.trim();
if (!slashesDenoteHost && url.split('#').length === 1) {
// Try fast path regexp
var simplePath = simplePathPattern.exec(rest);
if (simplePath) {
this.path = rest;
this.href = rest;
this.pathname = simplePath[1];
if (simplePath[2]) {
this.search = simplePath[2];
if (parseQueryString) {
this.query = querystring.parse(this.search.substr(1));
} else {
this.query = this.search.substr(1);
}
} else if (parseQueryString) {
this.search = '';
this.query = {};
}
return this;
}
}
var proto = protocolPattern.exec(rest);
if (proto) {
proto = proto[0];
var lowerProto = proto.toLowerCase();
this.protocol = lowerProto;
rest = rest.substr(proto.length);
}
// figure out if it's got a host
// user@server is *always* interpreted as a hostname, and url
// resolution will treat //foo/bar as host=foo,path=bar because that's
// how the browser resolves relative URLs.
if (slashesDenoteHost || proto || rest.match(/^\/\/[^@\/]+@[^@\/]+/)) {
var slashes = rest.substr(0, 2) === '//';
if (slashes && !(proto && hostlessProtocol[proto])) {
rest = rest.substr(2);
this.slashes = true;
}
}
if (!hostlessProtocol[proto] &&
(slashes || (proto && !slashedProtocol[proto]))) {
// there's a hostname.
// the first instance of /, ?, ;, or # ends the host.
//
// If there is an @ in the hostname, then non-host chars *are* allowed
// to the left of the last @ sign, unless some host-ending character
// comes *before* the @-sign.
// URLs are obnoxious.
//
// ex:
// http://a@b@c/ => user:a@b host:c
// http://a@b?@c => user:a host:c path:/?@c
// v0.12 TODO(isaacs): This is not quite how Chrome does things.
// Review our test case against browsers more comprehensively.
// find the first instance of any hostEndingChars
var hostEnd = -1;
for (var i = 0; i < hostEndingChars.length; i++) {
var hec = rest.indexOf(hostEndingChars[i]);
if (hec !== -1 && (hostEnd === -1 || hec < hostEnd))
hostEnd = hec;
}
// at this point, either we have an explicit point where the
// auth portion cannot go past, or the last @ char is the decider.
var auth, atSign;
if (hostEnd === -1) {
// atSign can be anywhere.
atSign = rest.lastIndexOf('@');
} else {
// atSign must be in auth portion.
// http://a@b/c@d => host:b auth:a path:/c@d
atSign = rest.lastIndexOf('@', hostEnd);
}
// Now we have a portion which is definitely the auth.
// Pull that off.
if (atSign !== -1) {
auth = rest.slice(0, atSign);
rest = rest.slice(atSign + 1);
this.auth = decodeURIComponent(auth);
}
// the host is the remaining to the left of the first non-host char
hostEnd = -1;
for (var i = 0; i < nonHostChars.length; i++) {
var hec = rest.indexOf(nonHostChars[i]);
if (hec !== -1 && (hostEnd === -1 || hec < hostEnd))
hostEnd = hec;
}
// if we still have not hit it, then the entire thing is a host.
if (hostEnd === -1)
hostEnd = rest.length;
this.host = rest.slice(0, hostEnd);
rest = rest.slice(hostEnd);
// pull out port.
this.parseHost();
// we've indicated that there is a hostname,
// so even if it's empty, it has to be present.
this.hostname = this.hostname || '';
// if hostname begins with [ and ends with ]
// assume that it's an IPv6 address.
var ipv6Hostname = this.hostname[0] === '[' &&
this.hostname[this.hostname.length - 1] === ']';
// validate a little.
if (!ipv6Hostname) {
var hostparts = this.hostname.split(/\./);
for (var i = 0, l = hostparts.length; i < l; i++) {
var part = hostparts[i];
if (!part) continue;
if (!part.match(hostnamePartPattern)) {
var newpart = '';
for (var j = 0, k = part.length; j < k; j++) {
if (part.charCodeAt(j) > 127) {
// we replace non-ASCII char with a temporary placeholder
// we need this to make sure size of hostname is not
// broken by replacing non-ASCII by nothing
newpart += 'x';
} else {
newpart += part[j];
}
}
// we test again with ASCII char only
if (!newpart.match(hostnamePartPattern)) {
var validParts = hostparts.slice(0, i);
var notHost = hostparts.slice(i + 1);
var bit = part.match(hostnamePartStart);
if (bit) {
validParts.push(bit[1]);
notHost.unshift(bit[2]);
}
if (notHost.length) {
rest = '/' + notHost.join('.') + rest;
}
this.hostname = validParts.join('.');
break;
}
}
}
}
if (this.hostname.length > hostnameMaxLen) {
this.hostname = '';
} else {
// hostnames are always lower case.
this.hostname = this.hostname.toLowerCase();
}
if (!ipv6Hostname) {
// IDNA Support: Returns a punycoded representation of "domain".
// It only converts parts of the domain name that
// have non-ASCII characters, i.e. it doesn't matter if
// you call it with a domain that already is ASCII-only.
this.hostname = punycode.toASCII(this.hostname);
}
var p = this.port ? ':' + this.port : '';
var h = this.hostname || '';
this.host = h + p;
this.href += this.host;
// strip [ and ] from the hostname
// the host field still retains them, though
if (ipv6Hostname) {
this.hostname = this.hostname.substr(1, this.hostname.length - 2);
if (rest[0] !== '/') {
rest = '/' + rest;
}
}
}
// now rest is set to the post-host stuff.
// chop off any delim chars.
if (!unsafeProtocol[lowerProto]) {
// First, make 100% sure that any "autoEscape" chars get
// escaped, even if encodeURIComponent doesn't think they
// need to be.
for (var i = 0, l = autoEscape.length; i < l; i++) {
var ae = autoEscape[i];
if (rest.indexOf(ae) === -1)
continue;
var esc = encodeURIComponent(ae);
if (esc === ae) {
esc = escape(ae);
}
rest = rest.split(ae).join(esc);
}
}
// chop off from the tail first.
var hash = rest.indexOf('#');
if (hash !== -1) {
// got a fragment string.
this.hash = rest.substr(hash);
rest = rest.slice(0, hash);
}
var qm = rest.indexOf('?');
if (qm !== -1) {
this.search = rest.substr(qm);
this.query = rest.substr(qm + 1);
if (parseQueryString) {
this.query = querystring.parse(this.query);
}
rest = rest.slice(0, qm);
} else if (parseQueryString) {
// no query string, but parseQueryString still requested
this.search = '';
this.query = {};
}
if (rest) this.pathname = rest;
if (slashedProtocol[lowerProto] &&
this.hostname && !this.pathname) {
this.pathname = '/';
}
//to support http.request
if (this.pathname || this.search) {
var p = this.pathname || '';
var s = this.search || '';
this.path = p + s;
}
// finally, reconstruct the href based on what has been validated.
this.href = this.format();
return this;
};
// format a parsed object into a url string
function urlFormat(obj) {
// ensure it's an object, and not a string url.
// If it's an obj, this is a no-op.
// this way, you can call url_format() on strings
// to clean up potentially wonky urls.
if (util.isString(obj)) obj = urlParse(obj);
if (!(obj instanceof Url)) return Url.prototype.format.call(obj);
return obj.format();
}
Url.prototype.format = function () {
var auth = this.auth || '';
if (auth) {
auth = encodeURIComponent(auth);
auth = auth.replace(/%3A/i, ':');
auth += '@';
}
var protocol = this.protocol || '',
pathname = this.pathname || '',
hash = this.hash || '',
host = false,
query = '';
if (this.host) {
host = auth + this.host;
} else if (this.hostname) {
host = auth + (this.hostname.indexOf(':') === -1 ?
this.hostname :
'[' + this.hostname + ']');
if (this.port) {
host += ':' + this.port;
}
}
if (this.query &&
util.isObject(this.query) &&
Object.keys(this.query).length) {
query = querystring.stringify(this.query);
}
var search = this.search || (query && ('?' + query)) || '';
if (protocol && protocol.substr(-1) !== ':') protocol += ':';
// only the slashedProtocols get the //. Not mailto:, xmpp:, etc.
// unless they had them to begin with.
if (this.slashes ||
(!protocol || slashedProtocol[protocol]) && host !== false) {
host = '//' + (host || '');
if (pathname && pathname.charAt(0) !== '/') pathname = '/' + pathname;
} else if (!host) {
host = '';
}
if (hash && hash.charAt(0) !== '#') hash = '#' + hash;
if (search && search.charAt(0) !== '?') search = '?' + search;
pathname = pathname.replace(/[?#]/g, function (match) {
return encodeURIComponent(match);
});
search = search.replace('#', '%23');
return protocol + host + pathname + search + hash;
};
function urlResolve(source, relative) {
return urlParse(source, false, true).resolve(relative);
}
Url.prototype.resolve = function (relative) {
return this.resolveObject(urlParse(relative, false, true)).format();
};
function urlResolveObject(source, relative) {
if (!source) return relative;
return urlParse(source, false, true).resolveObject(relative);
}
Url.prototype.resolveObject = function (relative) {
if (util.isString(relative)) {
var rel = new Url();
rel.parse(relative, false, true);
relative = rel;
}
var result = new Url();
var tkeys = Object.keys(this);
for (var tk = 0; tk < tkeys.length; tk++) {
var tkey = tkeys[tk];
result[tkey] = this[tkey];
}
// hash is always overridden, no matter what.
// even href="" will remove it.
result.hash = relative.hash;
// if the relative url is empty, then there's nothing left to do here.
if (relative.href === '') {
result.href = result.format();
return result;
}
// hrefs like //foo/bar always cut to the protocol.
if (relative.slashes && !relative.protocol) {
// take everything except the protocol from relative
var rkeys = Object.keys(relative);
for (var rk = 0; rk < rkeys.length; rk++) {
var rkey = rkeys[rk];
if (rkey !== 'protocol')
result[rkey] = relative[rkey];
}
//urlParse appends trailing / to urls like http://www.example.com
if (slashedProtocol[result.protocol] &&
result.hostname && !result.pathname) {
result.path = result.pathname = '/';
}
result.href = result.format();
return result;
}
if (relative.protocol && relative.protocol !== result.protocol) {
// if it's a known url protocol, then changing
// the protocol does weird things
// first, if it's not file:, then we MUST have a host,
// and if there was a path
// to begin with, then we MUST have a path.
// if it is file:, then the host is dropped,
// because that's known to be hostless.
// anything else is assumed to be absolute.
if (!slashedProtocol[relative.protocol]) {
var keys = Object.keys(relative);
for (var v = 0; v < keys.length; v++) {
var k = keys[v];
result[k] = relative[k];
}
result.href = result.format();
return result;
}
result.protocol = relative.protocol;
if (!relative.host && !hostlessProtocol[relative.protocol]) {
var relPath = (relative.pathname || '').split('/');
while (relPath.length && !(relative.host = relPath.shift()));
if (!relative.host) relative.host = '';
if (!relative.hostname) relative.hostname = '';
if (relPath[0] !== '') relPath.unshift('');
if (relPath.length < 2) relPath.unshift('');
result.pathname = relPath.join('/');
} else {
result.pathname = relative.pathname;
}
result.search = relative.search;
result.query = relative.query;
result.host = relative.host || '';
result.auth = relative.auth;
result.hostname = relative.hostname || relative.host;
result.port = relative.port;
// to support http.request
if (result.pathname || result.search) {
var p = result.pathname || '';
var s = result.search || '';
result.path = p + s;
}
result.slashes = result.slashes || relative.slashes;
result.href = result.format();
return result;
}
var isSourceAbs = (result.pathname && result.pathname.charAt(0) === '/'),
isRelAbs = (
relative.host ||
relative.pathname && relative.pathname.charAt(0) === '/'
),
mustEndAbs = (isRelAbs || isSourceAbs ||
(result.host && relative.pathname)),
removeAllDots = mustEndAbs,
srcPath = result.pathname && result.pathname.split('/') || [],
relPath = relative.pathname && relative.pathname.split('/') || [],
psychotic = result.protocol && !slashedProtocol[result.protocol];
// if the url is a non-slashed url, then relative
// links like ../.. should be able
// to crawl up to the hostname, as well. This is strange.
// result.protocol has already been set by now.
// Later on, put the first path part into the host field.
if (psychotic) {
result.hostname = '';
result.port = null;
if (result.host) {
if (srcPath[0] === '') srcPath[0] = result.host;
else srcPath.unshift(result.host);
}
result.host = '';
if (relative.protocol) {
relative.hostname = null;
relative.port = null;
if (relative.host) {
if (relPath[0] === '') relPath[0] = relative.host;
else relPath.unshift(relative.host);
}
relative.host = null;
}
mustEndAbs = mustEndAbs && (relPath[0] === '' || srcPath[0] === '');
}
if (isRelAbs) {
// it's absolute.
result.host = (relative.host || relative.host === '') ?
relative.host : result.host;
result.hostname = (relative.hostname || relative.hostname === '') ?
relative.hostname : result.hostname;
result.search = relative.search;
result.query = relative.query;
srcPath = relPath;
// fall through to the dot-handling below.
} else if (relPath.length) {
// it's relative
// throw away the existing file, and take the new path instead.
if (!srcPath) srcPath = [];
srcPath.pop();
srcPath = srcPath.concat(relPath);
result.search = relative.search;
result.query = relative.query;
} else if (!util.isNullOrUndefined(relative.search)) {
// just pull out the search.
// like href='?foo'.
// Put this after the other two cases because it simplifies the booleans
if (psychotic) {
result.hostname = result.host = srcPath.shift();
//occationaly the auth can get stuck only in host
//this especially happens in cases like
//url.resolveObject('mailto:local1@domain1', 'local2@domain2')
var authInHost = result.host && result.host.indexOf('@') > 0 ?
result.host.split('@') : false;
if (authInHost) {
result.auth = authInHost.shift();
result.host = result.hostname = authInHost.shift();
}
}
result.search = relative.search;
result.query = relative.query;
//to support http.request
if (!util.isNull(result.pathname) || !util.isNull(result.search)) {
result.path = (result.pathname ? result.pathname : '') +
(result.search ? result.search : '');
}
result.href = result.format();
return result;
}
if (!srcPath.length) {
// no path at all. easy.
// we've already handled the other stuff above.
result.pathname = null;
//to support http.request
if (result.search) {
result.path = '/' + result.search;
} else {
result.path = null;
}
result.href = result.format();
return result;
}
// if a url ENDs in . or .., then it must get a trailing slash.
// however, if it ends in anything else non-slashy,
// then it must NOT get a trailing slash.
var last = srcPath.slice(-1)[0];
var hasTrailingSlash = (
(result.host || relative.host || srcPath.length > 1) &&
(last === '.' || last === '..') || last === '');
// strip single dots, resolve double dots to parent dir
// if the path tries to go above the root, `up` ends up > 0
var up = 0;
for (var i = srcPath.length; i >= 0; i--) {
last = srcPath[i];
if (last === '.') {
srcPath.splice(i, 1);
} else if (last === '..') {
srcPath.splice(i, 1);
up++;
} else if (up) {
srcPath.splice(i, 1);
up--;
}
}
// if the path is allowed to go above the root, restore leading ..s
if (!mustEndAbs && !removeAllDots) {
for (; up--; up) {
srcPath.unshift('..');
}
}
if (mustEndAbs && srcPath[0] !== '' &&
(!srcPath[0] || srcPath[0].charAt(0) !== '/')) {
srcPath.unshift('');
}
if (hasTrailingSlash && (srcPath.join('/').substr(-1) !== '/')) {
srcPath.push('');
}
var isAbsolute = srcPath[0] === '' ||
(srcPath[0] && srcPath[0].charAt(0) === '/');
// put the host back
if (psychotic) {
result.hostname = result.host = isAbsolute ? '' :
srcPath.length ? srcPath.shift() : '';
//occationaly the auth can get stuck only in host
//this especially happens in cases like
//url.resolveObject('mailto:local1@domain1', 'local2@domain2')
var authInHost = result.host && result.host.indexOf('@') > 0 ?
result.host.split('@') : false;
if (authInHost) {
result.auth = authInHost.shift();
result.host = result.hostname = authInHost.shift();
}
}
mustEndAbs = mustEndAbs || (result.host && srcPath.length);
if (mustEndAbs && !isAbsolute) {
srcPath.unshift('');
}
if (!srcPath.length) {
result.pathname = null;
result.path = null;
} else {
result.pathname = srcPath.join('/');
}
//to support request.http
if (!util.isNull(result.pathname) || !util.isNull(result.search)) {
result.path = (result.pathname ? result.pathname : '') +
(result.search ? result.search : '');
}
result.auth = relative.auth || result.auth;
result.slashes = result.slashes || relative.slashes;
result.href = result.format();
return result;
};
Url.prototype.parseHost = function () {
var host = this.host;
var port = portPattern.exec(host);
if (port) {
port = port[0];
if (port !== ':') {
this.port = port.substr(1);
}
host = host.substr(0, host.length - port.length);
}
if (host) this.hostname = host;
};
}, {
"./util": 114,
"punycode": 93,
"querystring": 96
}],
114: [function (require, module, exports) {
'use strict';
module.exports = {
isString: function (arg) {
return typeof (arg) === 'string';
},
isObject: function (arg) {
return typeof (arg) === 'object' && arg !== null;
},
isNull: function (arg) {
return arg === null;
},
isNullOrUndefined: function (arg) {
return arg == null;
}
};
}, {}],
115: [function (require, module, exports) {
(function (global) {
/**
* Module exports.
*/
module.exports = deprecate;
/**
* Mark that a method should not be used.
* Returns a modified function which warns once by default.
*
* If `localStorage.noDeprecation = true` is set, then it is a no-op.
*
* If `localStorage.throwDeprecation = true` is set, then deprecated functions
* will throw an Error when invoked.
*
* If `localStorage.traceDeprecation = true` is set, then deprecated functions
* will invoke `console.trace()` instead of `console.error()`.
*
* @param {Function} fn - the function to deprecate
* @param {String} msg - the string to print to the console when `fn` is invoked
* @returns {Function} a new "deprecated" version of `fn`
* @api public
*/
function deprecate(fn, msg) {
if (config('noDeprecation')) {
return fn;
}
var warned = false;
function deprecated() {
if (!warned) {
if (config('throwDeprecation')) {
throw new Error(msg);
} else if (config('traceDeprecation')) {
console.trace(msg);
} else {
console.warn(msg);
}
warned = true;
}
return fn.apply(this, arguments);
}
return deprecated;
}
/**
* Checks `localStorage` for boolean values for the given `name`.
*
* @param {String} name
* @returns {Boolean}
* @api private
*/
function config(name) {
// accessing global.localStorage can trigger a DOMException in sandboxed iframes
try {
if (!global.localStorage) return false;
} catch (_) {
return false;
}
var val = global.localStorage[name];
if (null == val) return false;
return String(val).toLowerCase() === 'true';
}
}).call(this, typeof global !== "undefined" ? global : typeof self !== "undefined" ? self : typeof window !== "undefined" ? window : {})
}, {}],
116: [function (require, module, exports) {
module.exports = function isBuffer(arg) {
return arg && typeof arg === 'object' &&
typeof arg.copy === 'function' &&
typeof arg.fill === 'function' &&
typeof arg.readUInt8 === 'function';
}
}, {}],
117: [function (require, module, exports) {
(function (process, global) {
// Copyright Joyent, Inc. and other Node contributors.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the
// "Software"), to deal in the Software without restriction, including
// without limitation the rights to use, copy, modify, merge, publish,
// distribute, sublicense, and/or sell copies of the Software, and to permit
// persons to whom the Software is furnished to do so, subject to the
// following conditions:
//
// The above copyright notice and this permission notice shall be included
// in all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
// NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
// DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
// OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
// USE OR OTHER DEALINGS IN THE SOFTWARE.
var formatRegExp = /%[sdj%]/g;
exports.format = function (f) {
if (!isString(f)) {
var objects = [];
for (var i = 0; i < arguments.length; i++) {
objects.push(inspect(arguments[i]));
}
return objects.join(' ');
}
var i = 1;
var args = arguments;
var len = args.length;
var str = String(f).replace(formatRegExp, function (x) {
if (x === '%%') return '%';
if (i >= len) return x;
switch (x) {
case '%s':
return String(args[i++]);
case '%d':
return Number(args[i++]);
case '%j':
try {
return JSON.stringify(args[i++]);
} catch (_) {
return '[Circular]';
}
default:
return x;
}
});
for (var x = args[i]; i < len; x = args[++i]) {
if (isNull(x) || !isObject(x)) {
str += ' ' + x;
} else {
str += ' ' + inspect(x);
}
}
return str;
};
// Mark that a method should not be used.
// Returns a modified function which warns once by default.
// If --no-deprecation is set, then it is a no-op.
exports.deprecate = function (fn, msg) {
// Allow for deprecating things in the process of starting up.
if (isUndefined(global.process)) {
return function () {
return exports.deprecate(fn, msg).apply(this, arguments);
};
}
if (process.noDeprecation === true) {
return fn;
}
var warned = false;
function deprecated() {
if (!warned) {
if (process.throwDeprecation) {
throw new Error(msg);
} else if (process.traceDeprecation) {
console.trace(msg);
} else {
console.error(msg);
}
warned = true;
}
return fn.apply(this, arguments);
}
return deprecated;
};
var debugs = {};
var debugEnviron;
exports.debuglog = function (set) {
if (isUndefined(debugEnviron))
debugEnviron = process.env.NODE_DEBUG || '';
set = set.toUpperCase();
if (!debugs[set]) {
if (new RegExp('\\b' + set + '\\b', 'i').test(debugEnviron)) {
var pid = process.pid;
debugs[set] = function () {
var msg = exports.format.apply(exports, arguments);
console.error('%s %d: %s', set, pid, msg);
};
} else {
debugs[set] = function () {};
}
}
return debugs[set];
};
/**
* Echos the value of a value. Trys to print the value out
* in the best way possible given the different types.
*
* @param {Object} obj The object to print out.
* @param {Object} opts Optional options object that alters the output.
*/
/* legacy: obj, showHidden, depth, colors*/
function inspect(obj, opts) {
// default options
var ctx = {
seen: [],
stylize: stylizeNoColor
};
// legacy...
if (arguments.length >= 3) ctx.depth = arguments[2];
if (arguments.length >= 4) ctx.colors = arguments[3];
if (isBoolean(opts)) {
// legacy...
ctx.showHidden = opts;
} else if (opts) {
// got an "options" object
exports._extend(ctx, opts);
}
// set default options
if (isUndefined(ctx.showHidden)) ctx.showHidden = false;
if (isUndefined(ctx.depth)) ctx.depth = 2;
if (isUndefined(ctx.colors)) ctx.colors = false;
if (isUndefined(ctx.customInspect)) ctx.customInspect = true;
if (ctx.colors) ctx.stylize = stylizeWithColor;
return formatValue(ctx, obj, ctx.depth);
}
exports.inspect = inspect;
// http://en.wikipedia.org/wiki/ANSI_escape_code#graphics
inspect.colors = {
'bold': [1, 22],
'italic': [3, 23],
'underline': [4, 24],
'inverse': [7, 27],
'white': [37, 39],
'grey': [90, 39],
'black': [30, 39],
'blue': [34, 39],
'cyan': [36, 39],
'green': [32, 39],
'magenta': [35, 39],
'red': [31, 39],
'yellow': [33, 39]
};
// Don't use 'blue' not visible on cmd.exe
inspect.styles = {
'special': 'cyan',
'number': 'yellow',
'boolean': 'yellow',
'undefined': 'grey',
'null': 'bold',
'string': 'green',
'date': 'magenta',
// "name": intentionally not styling
'regexp': 'red'
};
function stylizeWithColor(str, styleType) {
var style = inspect.styles[styleType];
if (style) {
return '\u001b[' + inspect.colors[style][0] + 'm' + str +
'\u001b[' + inspect.colors[style][1] + 'm';
} else {
return str;
}
}
function stylizeNoColor(str, styleType) {
return str;
}
function arrayToHash(array) {
var hash = {};
array.forEach(function (val, idx) {
hash[val] = true;
});
return hash;
}
function formatValue(ctx, value, recurseTimes) {
// Provide a hook for user-specified inspect functions.
// Check that value is an object with an inspect function on it
if (ctx.customInspect &&
value &&
isFunction(value.inspect) &&
// Filter out the util module, it's inspect function is special
value.inspect !== exports.inspect &&
// Also filter out any prototype objects using the circular check.
!(value.constructor && value.constructor.prototype === value)) {
var ret = value.inspect(recurseTimes, ctx);
if (!isString(ret)) {
ret = formatValue(ctx, ret, recurseTimes);
}
return ret;
}
// Primitive types cannot have properties
var primitive = formatPrimitive(ctx, value);
if (primitive) {
return primitive;
}
// Look up the keys of the object.
var keys = Object.keys(value);
var visibleKeys = arrayToHash(keys);
if (ctx.showHidden) {
keys = Object.getOwnPropertyNames(value);
}
// IE doesn't make error fields non-enumerable
// http://msdn.microsoft.com/en-us/library/ie/dww52sbt(v=vs.94).aspx
if (isError(value) &&
(keys.indexOf('message') >= 0 || keys.indexOf('description') >= 0)) {
return formatError(value);
}
// Some type of object without properties can be shortcutted.
if (keys.length === 0) {
if (isFunction(value)) {
var name = value.name ? ': ' + value.name : '';
return ctx.stylize('[Function' + name + ']', 'special');
}
if (isRegExp(value)) {
return ctx.stylize(RegExp.prototype.toString.call(value), 'regexp');
}
if (isDate(value)) {
return ctx.stylize(Date.prototype.toString.call(value), 'date');
}
if (isError(value)) {
return formatError(value);
}
}
var base = '',
array = false,
braces = ['{', '}'];
// Make Array say that they are Array
if (isArray(value)) {
array = true;
braces = ['[', ']'];
}
// Make functions say that they are functions
if (isFunction(value)) {
var n = value.name ? ': ' + value.name : '';
base = ' [Function' + n + ']';
}
// Make RegExps say that they are RegExps
if (isRegExp(value)) {
base = ' ' + RegExp.prototype.toString.call(value);
}
// Make dates with properties first say the date
if (isDate(value)) {
base = ' ' + Date.prototype.toUTCString.call(value);
}
// Make error with message first say the error
if (isError(value)) {
base = ' ' + formatError(value);
}
if (keys.length === 0 && (!array || value.length == 0)) {
return braces[0] + base + braces[1];
}
if (recurseTimes < 0) {
if (isRegExp(value)) {
return ctx.stylize(RegExp.prototype.toString.call(value), 'regexp');
} else {
return ctx.stylize('[Object]', 'special');
}
}
ctx.seen.push(value);
var output;
if (array) {
output = formatArray(ctx, value, recurseTimes, visibleKeys, keys);
} else {
output = keys.map(function (key) {
return formatProperty(ctx, value, recurseTimes, visibleKeys, key, array);
});
}
ctx.seen.pop();
return reduceToSingleString(output, base, braces);
}
function formatPrimitive(ctx, value) {
if (isUndefined(value))
return ctx.stylize('undefined', 'undefined');
if (isString(value)) {
var simple = '\'' + JSON.stringify(value).replace(/^"|"$/g, '')
.replace(/'/g, "\\'")
.replace(/\\"/g, '"') + '\'';
return ctx.stylize(simple, 'string');
}
if (isNumber(value))
return ctx.stylize('' + value, 'number');
if (isBoolean(value))
return ctx.stylize('' + value, 'boolean');
// For some reason typeof null is "object", so special case here.
if (isNull(value))
return ctx.stylize('null', 'null');
}
function formatError(value) {
return '[' + Error.prototype.toString.call(value) + ']';
}
function formatArray(ctx, value, recurseTimes, visibleKeys, keys) {
var output = [];
for (var i = 0, l = value.length; i < l; ++i) {
if (hasOwnProperty(value, String(i))) {
output.push(formatProperty(ctx, value, recurseTimes, visibleKeys,
String(i), true));
} else {
output.push('');
}
}
keys.forEach(function (key) {
if (!key.match(/^\d+$/)) {
output.push(formatProperty(ctx, value, recurseTimes, visibleKeys,
key, true));
}
});
return output;
}
function formatProperty(ctx, value, recurseTimes, visibleKeys, key, array) {
var name, str, desc;
desc = Object.getOwnPropertyDescriptor(value, key) || {
value: value[key]
};
if (desc.get) {
if (desc.set) {
str = ctx.stylize('[Getter/Setter]', 'special');
} else {
str = ctx.stylize('[Getter]', 'special');
}
} else {
if (desc.set) {
str = ctx.stylize('[Setter]', 'special');
}
}
if (!hasOwnProperty(visibleKeys, key)) {
name = '[' + key + ']';
}
if (!str) {
if (ctx.seen.indexOf(desc.value) < 0) {
if (isNull(recurseTimes)) {
str = formatValue(ctx, desc.value, null);
} else {
str = formatValue(ctx, desc.value, recurseTimes - 1);
}
if (str.indexOf('\n') > -1) {
if (array) {
str = str.split('\n').map(function (line) {
return ' ' + line;
}).join('\n').substr(2);
} else {
str = '\n' + str.split('\n').map(function (line) {
return ' ' + line;
}).join('\n');
}
}
} else {
str = ctx.stylize('[Circular]', 'special');
}
}
if (isUndefined(name)) {
if (array && key.match(/^\d+$/)) {
return str;
}
name = JSON.stringify('' + key);
if (name.match(/^"([a-zA-Z_][a-zA-Z_0-9]*)"$/)) {
name = name.substr(1, name.length - 2);
name = ctx.stylize(name, 'name');
} else {
name = name.replace(/'/g, "\\'")
.replace(/\\"/g, '"')
.replace(/(^"|"$)/g, "'");
name = ctx.stylize(name, 'string');
}
}
return name + ': ' + str;
}
function reduceToSingleString(output, base, braces) {
var numLinesEst = 0;
var length = output.reduce(function (prev, cur) {
numLinesEst++;
if (cur.indexOf('\n') >= 0) numLinesEst++;
return prev + cur.replace(/\u001b\[\d\d?m/g, '').length + 1;
}, 0);
if (length > 60) {
return braces[0] +
(base === '' ? '' : base + '\n ') +
' ' +
output.join(',\n ') +
' ' +
braces[1];
}
return braces[0] + base + ' ' + output.join(', ') + ' ' + braces[1];
}
// NOTE: These type checking functions intentionally don't use `instanceof`
// because it is fragile and can be easily faked with `Object.create()`.
function isArray(ar) {
return Array.isArray(ar);
}
exports.isArray = isArray;
function isBoolean(arg) {
return typeof arg === 'boolean';
}
exports.isBoolean = isBoolean;
function isNull(arg) {
return arg === null;
}
exports.isNull = isNull;
function isNullOrUndefined(arg) {
return arg == null;
}
exports.isNullOrUndefined = isNullOrUndefined;
function isNumber(arg) {
return typeof arg === 'number';
}
exports.isNumber = isNumber;
function isString(arg) {
return typeof arg === 'string';
}
exports.isString = isString;
function isSymbol(arg) {
return typeof arg === 'symbol';
}
exports.isSymbol = isSymbol;
function isUndefined(arg) {
return arg === void 0;
}
exports.isUndefined = isUndefined;
function isRegExp(re) {
return isObject(re) && objectToString(re) === '[object RegExp]';
}
exports.isRegExp = isRegExp;
function isObject(arg) {
return typeof arg === 'object' && arg !== null;
}
exports.isObject = isObject;
function isDate(d) {
return isObject(d) && objectToString(d) === '[object Date]';
}
exports.isDate = isDate;
function isError(e) {
return isObject(e) &&
(objectToString(e) === '[object Error]' || e instanceof Error);
}
exports.isError = isError;
function isFunction(arg) {
return typeof arg === 'function';
}
exports.isFunction = isFunction;
function isPrimitive(arg) {
return arg === null ||
typeof arg === 'boolean' ||
typeof arg === 'number' ||
typeof arg === 'string' ||
typeof arg === 'symbol' || // ES6 symbol
typeof arg === 'undefined';
}
exports.isPrimitive = isPrimitive;
exports.isBuffer = require('./support/isBuffer');
function objectToString(o) {
return Object.prototype.toString.call(o);
}
function pad(n) {
return n < 10 ? '0' + n.toString(10) : n.toString(10);
}
var months = ['Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun', 'Jul', 'Aug', 'Sep',
'Oct', 'Nov', 'Dec'
];
// 26 Feb 16:19:34
function timestamp() {
var d = new Date();
var time = [pad(d.getHours()),
pad(d.getMinutes()),
pad(d.getSeconds())
].join(':');
return [d.getDate(), months[d.getMonth()], time].join(' ');
}
// log is just a thin wrapper to console.log that prepends a timestamp
exports.log = function () {
console.log('%s - %s', timestamp(), exports.format.apply(exports, arguments));
};
/**
* Inherit the prototype methods from one constructor into another.
*
* The Function.prototype.inherits from lang.js rewritten as a standalone
* function (not on Function.prototype). NOTE: If this file is to be loaded
* during bootstrapping this function needs to be rewritten using some native
* functions as prototype setup using normal JavaScript does not work as
* expected during bootstrapping (see mirror.js in r114903).
*
* @param {function} ctor Constructor function which needs to inherit the
* prototype.
* @param {function} superCtor Constructor function to inherit prototype from.
*/
exports.inherits = require('inherits');
exports._extend = function (origin, add) {
// Don't do anything if add isn't an object
if (!add || !isObject(add)) return origin;
var keys = Object.keys(add);
var i = keys.length;
while (i--) {
origin[keys[i]] = add[keys[i]];
}
return origin;
};
function hasOwnProperty(obj, prop) {
return Object.prototype.hasOwnProperty.call(obj, prop);
}
}).call(this, require('_process'), typeof global !== "undefined" ? global : typeof self !== "undefined" ? self : typeof window !== "undefined" ? window : {})
}, {
"./support/isBuffer": 116,
"_process": 92,
"inherits": 80
}],
118: [function (require, module, exports) {
(function (process, global) {
'use strict'
var Transform = require('readable-stream').Transform
var duplexify = require('duplexify')
var WS = require('ws')
var Buffer = require('safe-buffer').Buffer
module.exports = WebSocketStream
function buildProxy(options, socketWrite, socketEnd) {
var proxy = new Transform({
objectMode: options.objectMode
})
proxy._write = socketWrite
proxy._flush = socketEnd
return proxy
}
function WebSocketStream(target, protocols, options) {
var stream, socket
var isBrowser = process.title === 'browser'
var isNative = !!global.WebSocket
var socketWrite = isBrowser ? socketWriteBrowser : socketWriteNode
if (protocols && !Array.isArray(protocols) && 'object' === typeof protocols) {
// accept the "options" Object as the 2nd argument
options = protocols
protocols = null
if (typeof options.protocol === 'string' || Array.isArray(options.protocol)) {
protocols = options.protocol;
}
}
if (!options) options = {}
if (options.objectMode === undefined) {
options.objectMode = !(options.binary === true || options.binary === undefined)
}
var proxy = buildProxy(options, socketWrite, socketEnd)
if (!options.objectMode) {
proxy._writev = writev
}
// browser only: sets the maximum socket buffer size before throttling
var bufferSize = options.browserBufferSize || 1024 * 512
// browser only: how long to wait when throttling
var bufferTimeout = options.browserBufferTimeout || 1000
// use existing WebSocket object that was passed in
if (typeof target === 'object') {
socket = target
// otherwise make a new one
} else {
// special constructor treatment for native websockets in browsers, see
// https://github.com/maxogden/websocket-stream/issues/82
if (isNative && isBrowser) {
socket = new WS(target, protocols)
} else {
socket = new WS(target, protocols, options)
}
socket.binaryType = 'arraybuffer'
}
// was already open when passed in
if (socket.readyState === socket.OPEN) {
stream = proxy
} else {
stream = duplexify.obj()
socket.onopen = onopen
}
stream.socket = socket
socket.onclose = onclose
socket.onerror = onerror
socket.onmessage = onmessage
proxy.on('close', destroy)
var coerceToBuffer = !options.objectMode
function socketWriteNode(chunk, enc, next) {
// avoid errors, this never happens unless
// destroy() is called
if (socket.readyState !== socket.OPEN) {
next()
return
}
if (coerceToBuffer && typeof chunk === 'string') {
chunk = Buffer.from(chunk, 'utf8')
}
socket.send(chunk, next)
}
function socketWriteBrowser(chunk, enc, next) {
if (socket.bufferedAmount > bufferSize) {
setTimeout(socketWriteBrowser, bufferTimeout, chunk, enc, next)
return
}
if (coerceToBuffer && typeof chunk === 'string') {
chunk = Buffer.from(chunk, 'utf8')
}
try {
socket.send(chunk)
} catch (err) {
return next(err)
}
next()
}
function socketEnd(done) {
socket.close()
done()
}
function onopen() {
stream.setReadable(proxy)
stream.setWritable(proxy)
stream.emit('connect')
}
function onclose() {
stream.end()
stream.destroy()
}
function onerror(err) {
stream.destroy(err)
}
function onmessage(event) {
var data = event.data
if (data instanceof ArrayBuffer) data = Buffer.from(data)
else data = Buffer.from(data, 'utf8')
proxy.push(data)
}
function destroy() {
socket.close()
}
// this is to be enabled only if objectMode is false
function writev(chunks, cb) {
var buffers = new Array(chunks.length)
for (var i = 0; i < chunks.length; i++) {
if (typeof chunks[i].chunk === 'string') {
buffers[i] = Buffer.from(chunks[i], 'utf8')
} else {
buffers[i] = chunks[i].chunk
}
}
this._write(Buffer.concat(buffers), 'binary', cb)
}
return stream
}
}).call(this, require('_process'), typeof global !== "undefined" ? global : typeof self !== "undefined" ? self : typeof window !== "undefined" ? window : {})
}, {
"_process": 92,
"duplexify": 17,
"readable-stream": 108,
"safe-buffer": 110,
"ws": 119
}],
119: [function (require, module, exports) {
var ws = null
if (typeof WebSocket !== 'undefined') {
ws = WebSocket
} else if (typeof MozWebSocket !== 'undefined') {
ws = MozWebSocket
} else if (typeof window !== 'undefined') {
ws = window.WebSocket || window.MozWebSocket
}
module.exports = ws
}, {}],
120: [function (require, module, exports) {
// Returns a wrapper function that returns a wrapped callback
// The wrapper function should do some stuff, and return a
// presumably different callback function.
// This makes sure that own properties are retained, so that
// decorations and such are not lost along the way.
module.exports = wrappy
function wrappy(fn, cb) {
if (fn && cb) return wrappy(fn)(cb)
if (typeof fn !== 'function')
throw new TypeError('need wrapper function')
Object.keys(fn).forEach(function (k) {
wrapper[k] = fn[k]
})
return wrapper
function wrapper() {
var args = new Array(arguments.length)
for (var i = 0; i < args.length; i++) {
args[i] = arguments[i]
}
var ret = fn.apply(this, args)
var cb = args[args.length - 1]
if (typeof ret === 'function' && ret !== cb) {
Object.keys(cb).forEach(function (k) {
ret[k] = cb[k]
})
}
return ret
}
}
}, {}],
121: [function (require, module, exports) {
module.exports = extend
var hasOwnProperty = Object.prototype.hasOwnProperty;
function extend() {
var target = {}
for (var i = 0; i < arguments.length; i++) {
var source = arguments[i]
for (var key in source) {
if (hasOwnProperty.call(source, key)) {
target[key] = source[key]
}
}
}
return target
}
}, {}]
}, {}, [9])(9)
});