一、-- 声明游标CURSOR cursor_name IS select_statement
二、-- 游标类型
1、--For 循环游标
--(1)定义游标
--(2)定义游标变量
--(3)使用for循环来使用这个游标declare
--类型定义 cursor c_job is select empno,ename,job,sal from emp where job='MANAGER';
--定义一个游标变量v_cinfo c_emp%ROWTYPE ,该类型为游标c_emp中的一行数据类型
c_row c_job%rowtype;begin for c_row in c_job loop dbms_output.put_line(c_row.empno||'-'||c_row.ename||'-'||c_row.job||'-'||c_row.sal); end loop;end;
2、--Fetch游标--使用的时候必须要明确的打开和关闭declare
--类型定义 cursor c_job is select empno,ename,job,sal from emp where job='MANAGER';
--定义一个游标变量 c_row c_job%rowtype;begin open c_job; loop
--提取一行数据到c_row fetch c_job into c_row;
--判读是否提取到值,没取到值就退出
--取到值c_job%notfound 是false
--取不到值c_job%notfound 是true exit when c_job%notfound; dbms_output.put_line(c_row.empno||'-'||c_row.ename||'-'||c_row.job||'-'||c_row.sal); end loop;
--关闭游标 close c_job;end
;三、-- 游标使用
--1:任意执行一个update操作,用隐式游标sql的属性%found,%notfound,%rowcount,%isopen观察update语句的执行情况。 begin update emp set ENAME='ALEARK' WHERE EMPNO=7469; if sql%isopen then dbms_output.put_line('Openging'); else dbms_output.put_line('closing'); end if; if sql%found then dbms_output.put_line('游标指向了有效行')
;--判断游标是否指向有效行 else dbms_output.put_line('Sorry');
end if;
if sql%notfound then dbms_output.put_line('Also Sorry');
else dbms_output.put_line('Haha');
end if; dbms_output.put_line(sql%rowcount);
exception when no_data_found then dbms_output.put_line('Sorry No data');
when too_many_rows then dbms_output.put_line('Too Many rows');
end;declare empNumber emp.EMPNO%TYPE; empName emp.ENAME%TYPE;
begin if sql%isopen then dbms_output.put_line('Cursor is opinging');
else dbms_output.put_line('Cursor is Close');
end if; if sql%notfound then dbms_output.put_line('No Value'); else dbms_output.put_line(empNumber);
end if; dbms_output.put_line(sql%rowcount);
dbms_output.put_line('-------------');
select EMPNO,ENAME into empNumber,empName from emp where EMPNO=7499; dbms_output.put_line(sql%rowcount);
if sql%isopen then dbms_output.put_line('Cursor is opinging');
else dbms_output.put_line('Cursor is Closing');
end if; if sql%notfound then dbms_output.put_line('No Value'); else dbms_output.put_line(empNumber);
end if; exception when no_data_found then dbms_output.put_line('No Value');
when too_many_rows then bms_output.put_line('too many rows'); end;
--2,使用游标和loop循环来显示所有部门的名称--游标声明declare cursor csr_dept is
--select语句 select DNAME from Depth;
--指定行指针,这句话应该是指定和csr_dept行类型相同的变量 row_dept csr_dept%rowtype;begin
--for循环 for row_dept in csr_dept loop dbms_output.put_line('部门名称:'||row_dept.DNAME); end loop;end;
--3,使用游标和while循环来显示所有部门的的地理位置(用%found属性)declare
--游标声明 cursor csr_TestWhile is --select语句 select LOC from Depth;
--指定行指针 row_loc csr_TestWhile%rowtype;begin
--打开游标 open csr_TestWhile;
--给第一行喂数据 fetch csr_TestWhile into row_loc;
--测试是否有数据,并执行循环 while csr_TestWhile%found loop dbms_output.put_line('部门地点:'||row_loc.LOC);
--给下一行喂数据 fetch csr_TestWhile into row_loc; end loop; close csr_TestWhile;end; select * from emp
--4,接收用户输入的部门编号,用for循环和游标,打印出此部门的所有雇员的所有信息(使用循环游标)
--CURSOR cursor_name[(parameter[,parameter],...)] IS select_statement;
--定义参数的语法如下:
Parameter_name [IN] data_type[{:=|DEFAULT} value] declare CURSOR c_dept(p_deptNo number) is select * from emp where emp.depno=p_deptNo;
r_emp emp%rowtype;begin for r_emp in c_dept(20) loop dbms_output.put_line('员工号:'||r_emp.EMPNO||'员工名:'||r_emp.ENAME||' 工资:'||r_emp.SAL);
end loop;end;select * from emp
--5:向游标传递一个工种,显示此工种的所有雇员的所有信息(使用参数游标)declare cursor c_job(p_job nvarchar2) is select * from emp where JOB=p_job;
r_job emp%rowtype;begin for r_job in c_job('CLERK') loop dbms_output.put_line('员工号'||r_job.EMPNO||' '||'员工姓名'||r_job.ENAME);
end loop;end;SELECT * FROM EMP
--6:用更新游标来为雇员加佣金:(用if实现,创建一个与emp表一摸一样的emp1表,对emp1表进行修改操作),并将更新前后的数据输出出来
--http://zheng12tian.iteye.com/blog/815770 create table emp1 as select * from emp;
declare cursor csr_Update is select * from emp1 for update OF SAL;
empInfo csr_Update%rowtype;
saleInfo emp1.SAL%TYPE;begin FOR empInfo IN csr_Update LOOP IF empInfo.SAL<1500 THEN saleInfo:=empInfo.SAL*1.2;
elsif empInfo.SAL<2000 THEN saleInfo:=empInfo.SAL*1.5;
elsif empInfo.SAL<3000 then="" saleinfo:="empInfo.SAL*2;"
end="" if=""
update="" emp1="" set="" sal="saleInfo"
where="" current="" of="" csr_update=""
end="" loop="" end="" --7:="" pl="" sql="" a="" s="" sal="" 10=""
emp1="" declare="declare" cursor="" csr_addsal="" is="" select="" from="" emp1=""
where="" ename="" like="" a="" or="" ename="" like="" s="" for="" update="" of="" sal=""
r_addsal="" csr_addsal="" rowtype="" saleinfo="" emp1=""
sal="" type="" begin="" for="" r_addsal="" in="" csr_addsal="" loop="" dbms_output="" put_line=""
r_addsal="" ename="" :="" r_addsal="" sal="" saleinfo:="r_AddSal.SAL*1.1;"
update="" emp1="" set="" sal="saleInfo" where="" current="" of="" csr_addsal="" end="" loop=""
end="" --8="" pl="" sql="" salesman="" comm="" 500="" declare="declare" cursor="" csr_addcomm="" p_job="" nvarchar2=""
is="" select="" from="" emp1="" where="" job="p_job" for="" update="" of="" comm="" r_addcomm="" emp1=""
rowtype="" comminfo="" emp1="" comm="" type="" begin="" for="" r_addcomm="" in="" csr_addcomm="" salesman="" loop=""
comminfo:="r_AddComm.COMM+500;" update="" emp1="" set="" comm="commInfo" where="" current="" of=""
csr_addcomm="" end="" loop="" end="" --9="" pl="" sql="" 2="" manager="" --="" declare="declare" cursor=""
crs_testcomput="" is="" select="" from="" emp1="" order="" by="" hiredate="" asc="" --="" top_two="" number:="2;"
r_testcomput="" crs_testcomput="" rowtype="" begin="" open="" crs_testcomput="" fetch="" crs_testcomput="" into="" r_testcomput=""
while="" top_two="">0 loop dbms_output.put_line('员工姓名:'||r_testComput.ENAME||' 工作时间:'||r_testComput.HIREDATE);
--计速器减
一 top_two:=top_two-1; FETCH crs_testComput INTO r_testComput; end loop; close crs_testComput;end;
--10:编写一个PL/SQL程序块,对所有雇员按他们的基本薪水(sal)的20%为他们加薪,
--如果增加的薪水大于300就取消加薪(对emp1表进行修改操作,并将更新前后的数据输出出来)
declare cursor crs_UpadateSal is select * from emp1 for update of SAL;
r_UpdateSal crs_UpadateSal%rowtype; salAdd emp1.sal%type;
salInfo emp1.sal%type;
begin for r_UpdateSal in crs_UpadateSal loop salAdd:= r_UpdateSal.SAL*0.2; if salAdd>300 then salInfo:=r_UpdateSal.SAL;
dbms_output.put_line(r_UpdateSal.ENAME||': 加薪失败。'||'薪水维持在:'||r_UpdateSal.SAL); else salInfo:=r_UpdateSal.SAL+salAdd;
dbms_output.put_line(r_UpdateSal.ENAME||': 加薪成功.'||'薪水变为:'||salInfo); end if; update emp1 set SAL=salInfo
where current of crs_UpadateSal; end loop;end;
--11:将每位员工工作了多少年零多少月零多少天输出出来 --近似 --CEIL(n)函数:取大于等于数值n的最小整数 --FLOOR(n)函数:取小于等于数值n的最大整数 --truc的用法 http://publish.it168.com/2005/1028/20051028034101.shtmldeclare cursor crs_WorkDay is select ENAME,HIREDATE,
trunc(months_between(sysdate, hiredate) / 12) AS SPANDYEARS, trunc(mod(months_between(sysdate, hiredate), 12)) AS months,
trunc(mod(mod(sysdate - hiredate, 365), 12)) as days from emp1;
r_WorkDay crs_WorkDay%rowtype;begin for r_WorkDay in crs_WorkDay
loop dbms_output.put_line(r_WorkDay.ENAME||'已经工作了'||r_WorkDay.SPANDYEARS||'年,零'||r_WorkDay.months||'月,零'||r_WorkDay.days||'天');
end loop;end;
--12:输入部门编号,按照下列加薪比例执行(用CASE实现,创建一个emp1表,修改emp1表的数据),并将更新前后的数据输出出来-- deptno raise(%)
-- 10 5%-- 20 10%-- 30 15%-- 40 20%
-- 加薪比例以现有的sal为标准--CASE expr WHEN comparison_expr THEN return_expr--[, WHEN comparison_expr THEN return_expr]...
[ELSE else_expr] ENDdeclare cursor crs_caseTest is select * from emp1 for update of SAL;
r_caseTest crs_caseTest%rowtype;
salInfo emp1.sal%type; begin for r_caseTest in crs_caseTest loop case when r_caseTest.DEPNO=10 THEN salInfo:=r_caseTest.SAL*1.05;
when r_caseTest.DEPNO=20 THEN salInfo:=r_caseTest.SAL*1.1;
when r_caseTest.DEPNO=30 THEN salInfo:=r_caseTest.SAL*1.15; when r_caseTest.DEPNO=40 THEN salInfo:=r_caseTest.SAL*1.2;
end case; update emp1 set SAL=salInfo where current of crs_caseTest; end loop;end;
--13:对每位员工的薪水进行判断,如果该员工薪水高于其所在部门的平均薪水,则将其薪水减50元,输出更新前后的薪水,员工姓名,所在部门编号。
--AVG([distinct|all] expr) over (analytic_clause)---作用:
--按照analytic_clause中的规则求分组平均值。
--分析函数语法: --FUNCTION_NAME(,...)
--OVER
--() --PARTITION子句
--按照表达式分区(就是分组),如果省略了分区子句,则全部的结果集被看作是一个单一的组
select * from emp1DECLARE CURSOR crs_testAvg IS
select EMPNO,ENAME,JOB,SAL,DEPNO,AVG(SAL) OVER (PARTITION BY DEPNO ) AS DEP_AVG FROM EMP1 for update of SAL;
r_testAvg crs_testAvg%rowtype; salInfo emp1.sal%type; begin for r_testAvg in crs_testAvg loop if r_testAvg.SAL > r_testAvg.DEP_AVG then salInfo:=r_testAvg.SAL-50;
end if; update emp1 set SAL=salInfo where current of crs_testAvg; end loop;end;
一般利用fetch into 打开游标一定要注意close cursor,还要在exception中也做处理否则系统资源将会被占用。。。。直至。。。。。。利用for loop没有这样的问题--loop循环游标:
declarecursor empcur is select * from emp order by empno desc;emprow emp%rowtype;beginopen empcur;loopfetch empcur into emprow;
exit when empcur%notfound; //判断结束语句
dbms_output.put_line('empno is '||emprow.empno);end loop;dbms_output.put_line(empcur%rowcount);close empcur;end;/while
循环游标declarecursor empcur is select * from emp order by empno desc;emprow emp%rowtype;
beginopen empcur;fetch empcur into emprow;while empcur%foundloopdbms_output.put_line('empno is '||emprow.empno);
fetch empcur into emprow;end loop;
dbms_output.put_line(empcur%rowcount);close empcur;end;for循环游标declarecursor empcur is select * from emp order by empno desc;
--不需顶一行级变量。不需要显式打开关闭游标beginfor emprow in empcur loop
--隐式定义行级变量
emprowdbms_output.put_line('empno is '||emprow.empno);end loop;end;ref
游标declaretype refempcur is ref cursor;
--定义动态游标类型。empcur refempcur;
--动态游标属性列emprow emp%rowtype;flag int:=0;beginflag:=&flag;
--绑定变量用来指向不同的操作。
if flag=0 thenopen empcur for select * from emp where sal>1500;
elsif flag=1 thenopen empcur for select * from emp where sal<1500;else open empcur for
select * from emp;end if;fetch empcur into emprow; --while循环while empcur%found loop
--游标已经打开,获取游标内容
dbms_output.put_line('empno is :'||emprow.empno); fetch empcur into emprow; end loop;end;