Visual Studio, Microsoft Portable Executable and Common Object File Format Specification

Visual Studio, Microsoft Portable Executableand Common Object File Format Specification

Revision 9.3 – December 29, 2015

Abstract

This specification describes thestructure of executable (image) files and object files under the Windows®family of operating systems. These files are referred to as Portable Executable(PE) and Common Object File Format (COFF) files, respectively.

Note

This document is provided to aid in thedevelopment of tools and applications for Windows but is not guaranteed to be acomplete specification in all respects. Microsoft reserves the right to alterthis document without notice.

 

This revision of the Microsoft PortableExecutable and Common Object File Format Specification replaces all previousrevisions of this specification.

For the latest information, see:

        http://www.microsoft.com/whdc/system/platform/firmware/PECOFF.mspx

LegalNotice

MicrosoftPortable Executable and Common Object File Format Specification

Microsoft Corporation

Revision 9.3

 

Note:  Thisspecification is provided to aid in the development of certain developmenttools for the Microsoft Windows platform. However, Microsoft does not guarantee that it is a completespecification in all respects, and cannot guarantee the accuracy of anyinformation presented after the date of publication.  Microsoft reserves the right to alter this specificationwithout notice.

 

Microsoft will grant a royalty-freelicense, under reasonable and non-discriminatory terms and conditions, to anyMicrosoft patent claims (if any exist) that Microsoft deems necessary for thelimited purpose of implementing and complying with the required portions ofthis specification only in the software development tools known as compilers,linkers, and assemblers targeting Microsoft Windows.

 

Complying with all applicablecopyright laws is the responsibility of the user.  Without limiting the rights under copyright,no part of this specification may be reproduced, stored in or introduced into aretrieval system, modified or used in a derivative work, or transmitted in anyform or by any means (electronic, mechanical, photocopying, recording, orotherwise), or for any purpose, without the express written permission ofMicrosoft.

 

Microsoft may have intellectualproperty rights covering subject matter in this specification.  Except as expressly provided in any writtenlicense agreement from Microsoft, the furnishing of this specification does notgive you any license to any intellectual property rights, and no other rightsare granted by implication, estoppel, or otherwise.

 

© 2016 Microsoft Corporation.  All rights reserved.

 

This specification isprovided “AS IS.”  Microsoft makes norepresentations or warranties, express, implied, or statutory, as (1) to theinformation in this specification, including any warranties of merchantability,fitness for a particular purpose, non-infringement, or title; (2) that thecontents of this specification are suitable for any purpose; nor (3) that theimplementation of such contents will not infringe any third party patents,copyrights, trademarks, or other rights.

 

Microsoft will not beliable for any direct, indirect, special, incidental, or consequential damagesarising out of or relating to any use or distribution of this specification.

 

Microsoft, MS-DOS, MSDN, VisualStudio, Visual C++, Win32, Windows, Windows NT, Windows Server, and WindowsVista are either registered trademarks or trademarks of Microsoft Corporationin the United States and/or other countries. Other product and company names mentioned herein may be the trademarksof their respective owners.

 

The foregoing names and trademarks maynot be used in any manner, including advertising or publicity pertaining tothis specification or its contents without specific, written prior permissionfrom the respective owners.

 

Contents

1. General Concepts.5

2. Overview.6

3. File Headers.7

3.1. MS‑DOS Stub(Image Only)7

3.2. Signature(Image Only)7

3.3. COFF FileHeader (Object and Image)7

3.3.1. Machine Types.8

3.3.2.Characteristics.9

3.4. Optional Header(Image Only)10

3.4.1. OptionalHeader Standard Fields (Image Only)10

3.4.2. OptionalHeader Windows-Specific Fields (Image Only)11

3.4.3. OptionalHeader Data Directories (Image Only)14

4. Section Table(Section Headers)15

4.1. Section Flags.17

4.2. GroupedSections (Object Only)18

5. Other Contents ofthe File.19

5.1. Section Data.19

5.2. COFFRelocations (Object Only)19

5.2.1. TypeIndicators.20

5.3. COFF LineNumbers (Deprecated)28

5.4. COFF SymbolTable.29

5.4.1. Symbol NameRepresentation.30

5.4.2. SectionNumber Values.30

5.4.3. TypeRepresentation.31

5.4.4. Storage Class.32

5.5. AuxiliarySymbol Records.33

5.5.1. AuxiliaryFormat 1: Function Definitions.34

5.5.2. AuxiliaryFormat 2: .bf and .ef Symbols.34

5.5.3. AuxiliaryFormat 3: Weak Externals.34

5.5.4. AuxiliaryFormat 4: Files.35

5.5.5. AuxiliaryFormat 5: Section Definitions.35

5.5.6. COMDATSections (Object Only)36

5.5.7. CLR TokenDefinition (Object Only)37

5.6. COFF StringTable.37

5.7. The AttributeCertificate Table (Image Only)37

5.7.1. CertificateData.38

5.8. Delay-LoadImport Tables (Image Only)38

5.8.1. TheDelay-Load Directory Table.38

5.8.2. Attributes.39

5.8.3. Name.39

5.8.4. Module Handle.39

5.8.5. Delay ImportAddress Table.39

5.8.6. Delay ImportName Table.39

5.8.7. Delay BoundImport Address Table and Time Stamp.39

5.8.8. Delay UnloadImport Address Table.39

6. Special Sections.39

6.1. The .debugSection.42

6.1.1. DebugDirectory (Image Only)42

6.1.2. Debug Type.43

6.1.3. .debug$F(Object Only)43

6.1.4. .debug$S(Object Only)44

6.1.5. .debug$P(Object Only)44

6.1.6. .debug$T(Object Only)44

6.1.7. LinkerSupport for Microsoft Debug Information.44

6.2. The .drectveSection (Object Only)44

6.3. The .edataSection (Image Only)44

6.3.1. ExportDirectory Table.45

6.3.2. ExportAddress Table.46

6.3.3. Export NamePointer Table.46

6.3.4. ExportOrdinal Table.47

6.3.5. Export NameTable.47

6.4. The .idataSection.48

6.4.1. ImportDirectory Table.48

6.4.2. Import LookupTable.49

6.4.3. Hint/NameTable.49

6.4.4. ImportAddress Table.49

6.5. The .pdataSection.49

6.6. The .relocSection (Image Only)50

6.6.1. BaseRelocation Block.50

6.6.2. BaseRelocation Types.51

6.7. The .tlsSection.51

6.7.1. The TLSDirectory.53

6.7.2. TLS CallbackFunctions.53

6.8. The LoadConfiguration Structure (Image Only)54

6.8.1. Load ConfigurationDirectory.54

6.8.2. LoadConfiguration Layout54

6.9. The .rsrcSection.55

6.9.1. ResourceDirectory Table.56

6.9.2. ResourceDirectory Entries.57

6.9.3. ResourceDirectory String.57

6.9.4. Resource DataEntry.57

6.10. The .cormetaSection (Object Only)57

6.11. The .sxdataSection.57

7. Archive (Library)File Format58

7.1. Archive FileSignature.59

7.2. Archive MemberHeaders.59

7.3. First LinkerMember59

7.4. Second LinkerMember60

7.5. LongnamesMember61

8. Import LibraryFormat61

8.1. Import Header62

8.2. Import Type.62

8.3. Import NameType.62

Appendix A:Calculating Authenticode PE Image Hash.64

A.1 What is anAuthenticode PE Image Hash?.64

A.2 What is Coveredin an Authenticode PE Image Hash?.64

References.65

 

1 General Concepts

This document specifies the structure ofexecutable (image) files and object files under the Microsoft® Windows® familyof operating systems. These files are referred to as Portable Executable (PE)and Common Object File Format (COFF) files, respectively. The name “PortableExecutable” refers to the fact that the format is not architecture specific.

Certain concepts that appear throughoutthis specification are described in the following table:

Name	Description
attribute certificate	A certificate that is used to associate verifiable statements with an image. A number of different verifiable statements can be associated with a file; one of the most useful ones is a statement by a software manufacturer that indicates what the message digest of the image is expected to be. A message digest is similar to a checksum except that it is extremely difficult to forge. Therefore, it is very difficult to modify a file to have the same message digest as the original file. The statement can be verified as being made by the manufacturer by using public or private key cryptography schemes. This document describes details about attribute certificates other than to allow for their insertion into image files.
date/time stamp	A stamp that is used for different purposes in several places in a PE or COFF file. In most cases, the format of each stamp is the same as that used by the time functions in the C run-time library. For exceptions, see the descripton ofIMAGE_DEBUG_TYPE_REPRO (section 6.1.2). If the stamp value is 0 or 0xFFFFFFFF, it does not represent a real or meaningful date/time stamp.
file pointer	The location of an item within the file itself, before being processed by the linker (in the case of object files) or the loader (in the case of image files). In other words, this is a position within the file as stored on disk.
linker	A reference to the linker that is provided with Microsoft Visual Studio®.
object file	A file that is given as input to the linker. The linker produces an image file, which in turn is used as input by the loader. The term “object file” does not necessarily imply any connection to object-oriented programming.
reserved, must be 0	A description of a field that indicates that the value of the field must be zero for generators and consumers must ignore the field.
RVA	Relative virtual address. In an image file, the address of an item after it is loaded into memory, with the base address of the image file subtracted from it. The RVA of an item almost always differs from its position within the file on disk (file pointer). In an object file, an RVA is less meaningful because memory locations are not assigned. In this case, an RVA would be an address within a section (described later in this table), to which a relocation is later applied during linking. For simplicity, a compiler should just set the first RVA in each section to zero.
section	The basic unit of code or data within a PE or COFF file. For example, all code in an object file can be combined within a single section or (depending on compiler behavior) each function can occupy its own section. With more sections, there is more file overhead, but the linker is able to link in code more selectively. A section is similar to a segment in Intel 8086 architecture. All the raw data in a section must be loaded contiguously. In addition, an image file can contain a number of sections, such as .tls or .reloc, which have special purposes.
VA	virtual address. Same as RVA, except that the base address of the image file is not subtracted. The address is called a “VA” because Windows creates a distinct VA space for each process, independent of physical memory. For almost all purposes, a VA should be considered just an address. A VA is not as predictable as an RVA because the loader might not load the image at its preferred location.

2 Overview

Figure 1 illustrates the Microsoft PEexecutable format.

MS-DOS 2.0 Compatible EXE Header		Base of Image Header
unused
OEM Identifier OEM Information   Offset to PE Header		MS‑DOS 2.0 Section (for MS­‑DOS compatibility only)
MS‑DOS 2.0 Stub Program  and Relocation Table
unused
PE Header (aligned on 8-byte boundary)
Section Headers
Image Pages: import info export info base relocations resource info

Figure 1. Typical Portable EXE File Layout

Figure 2 illustrates the Microsoft COFFobject-module format:

Microsoft COFF Header
Section Headers
Raw Data: code data debug info relocations

Figure 2. Typical COFF Object Module Layout

3 File Headers

The PE file header consists of a MicrosoftMS‑DOS® stub, the PE signature, the COFF file header, and an optional header. ACOFF object file header consists of a COFF file header and an optional header.In both cases, the file headers are followed immediately by section headers.

3.1 MS‑DOSStub (Image Only)

The MS‑DOS stub is a valid applicationthat runs under MS‑DOS. It is placed at the front of the EXE image. The linkerplaces a default stub here, which prints out the message “This program cannotbe run in DOS mode” when the image is run in MS‑DOS. The user can specify adifferent stub by using the /STUB linker option.

At location 0x3c, the stub has the fileoffset to the PE signature. This information enables Windows to properlyexecute the image file, even though it has an MS‑DOS stub. This file offset isplaced at location 0x3c during linking.

3.2Signature (Image Only)

After the MS‑DOS stub, at the file offsetspecified at offset 0x3c, is a 4-byte signature that identifies the file as aPE format image file. This signature is “PE\0\0” (the letters “P” and “E”followed by two null bytes).

3.3 COFF File Header (Object and Image)

At the beginning of an object file, orimmediately after the signature of an image file, is a standard COFF file headerin the following format. Note that the Windows loader limits the number of sectionsto 96.

Offset	Size	Field	Description
0	2	Machine	The number that identifies the type of target machine. For more information, see section 3.3.1, “Machine Types.”
2	2	NumberOfSections	The number of sections. This indicates the size of the section table, which immediately follows the headers.
4	4	TimeDateStamp	The low 32 bits of the number of seconds since 00:00 January 1, 1970 (a C run-time time_t value), that indicates when the file was created.
8	4	PointerToSymbolTable	The file offset of the COFF symbol table, or zero if no COFF symbol table is present. This value should be zero for an image because COFF debugging information is deprecated.
12	4	NumberOfSymbols	The number of entries in the symbol table. This data can be used to locate the string table, which immediately follows the symbol table. This value should be zero for an image because COFF debugging information is deprecated.
16	2	SizeOfOptionalHeader	The size of the optional header, which is required for executable files but not for object files. This value should be zero for an object file. For a description of the header format, see section 3.4, “Optional Header (Image Only).”
18	2	Characteristics	The flags that indicate the attributes of the file. For specific flag values, see section 3.3.2, “Characteristics.”

3.3.1Machine Types

The Machine field has one of thefollowing values that specifies its CPU type. An image file can be run only onthe specified machine or on a system that emulates the specified machine.

Constant	Value	Description
IMAGE_FILE_MACHINE_UNKNOWN	0x0	The contents of this field are assumed to be applicable to any machine type
IMAGE_FILE_MACHINE_AM33	0x1d3	Matsushita AM33
IMAGE_FILE_MACHINE_AMD64	0x8664	x64
IMAGE_FILE_MACHINE_ARM	0x1c0	ARM little endian
IMAGE_FILE_MACHINE_ARMNT	0x1c4	ARM Thumb-2 little endian
IMAGE_FILE_MACHINE_EBC	0xebc	EFI byte code
IMAGE_FILE_MACHINE_I386	0x14c	Intel 386 or later processors and compatible processors
IMAGE_FILE_MACHINE_IA64	0x200	Intel Itanium processor family
IMAGE_FILE_MACHINE_M32R	0x9041	Mitsubishi M32R little endian
IMAGE_FILE_MACHINE_MIPS16	0x266	MIPS16
IMAGE_FILE_MACHINE_MIPSFPU	0x366	MIPS with FPU
IMAGE_FILE_MACHINE_MIPSFPU16	0x466	MIPS16 with FPU
IMAGE_FILE_MACHINE_POWERPC	0x1f0	Power PC little endian
IMAGE_FILE_MACHINE_POWERPCFP	0x1f1	Power PC with floating point support
IMAGE_FILE_MACHINE_R4000	0x166	MIPS little endian
IMAGE_FILE_MACHINE_RISCV32	0x5032	RISC-V 32-bit address space
IMAGE_FILE_MACHINE_RISCV64	0x5064	RISC-V 64-bit address space
IMAGE_FILE_MACHINE_RISCV128	0x5128	RISC-V 128-bit address space
IMAGE_FILE_MACHINE_SH3	0x1a2	Hitachi SH3
IMAGE_FILE_MACHINE_SH3DSP	0x1a3	Hitachi SH3 DSP
IMAGE_FILE_MACHINE_SH4	0x1a6	Hitachi SH4
IMAGE_FILE_MACHINE_SH5	0x1a8	Hitachi SH5
IMAGE_FILE_MACHINE_THUMB	0x1c2	Thumb
IMAGE_FILE_MACHINE_WCEMIPSV2	0x169	MIPS little-endian WCE v2

3.3.2Characteristics

The Characteristics field contains flagsthat indicate attributes of the object or image file. The following flags are currentlydefined:

Flag	Value	Description
IMAGE_FILE_RELOCS_STRIPPED	0x0001	Image only, Windows CE, and Microsoft Windows NT® and later. This indicates that the file does not contain base relocations and must therefore be loaded at its preferred base address. If the base address is not available, the loader reports an error. The default behavior of the linker is to strip base relocations from executable (EXE) files.
IMAGE_FILE_EXECUTABLE_IMAGE	0x0002	Image only. This indicates that the image file is valid and can be run. If this flag is not set, it indicates a linker error.
IMAGE_FILE_LINE_NUMS_STRIPPED	0x0004	COFF line numbers have been removed. This flag is deprecated and should be zero.
IMAGE_FILE_LOCAL_SYMS_STRIPPED	0x0008	COFF symbol table entries for local symbols have been removed. This flag is deprecated and should be zero.
IMAGE_FILE_AGGRESSIVE_WS_TRIM	0x0010	Obsolete. Aggressively trim working set. This flag is deprecated for Windows 2000 and later and must be zero.
IMAGE_FILE_LARGE_ADDRESS_ AWARE	0x0020	Application can handle > 2‑GB addresses.
	0x0040	This flag is reserved for future use.
IMAGE_FILE_BYTES_REVERSED_LO	0x0080	Little endian: the least significant bit (LSB) precedes the most significant bit (MSB) in memory. This flag is deprecated and should be zero.
IMAGE_FILE_32BIT_MACHINE	0x0100	Machine is based on a 32-bit-word architecture.
IMAGE_FILE_DEBUG_STRIPPED	0x0200	Debugging information is removed from the image file.
IMAGE_FILE_REMOVABLE_RUN_ FROM_SWAP	0x0400	If the image is on removable media, fully load it and copy it to the swap file.
IMAGE_FILE_NET_RUN_FROM_SWAP	0x0800	If the image is on network media, fully load it and copy it to the swap file.
IMAGE_FILE_SYSTEM	0x1000	The image file is a system file, not a user program.
IMAGE_FILE_DLL	0x2000	The image file is a dynamic-link library (DLL). Such files are considered executable files for almost all purposes, although they cannot be directly run.
IMAGE_FILE_UP_SYSTEM_ONLY	0x4000	The file should be run only on a uniprocessor machine.
IMAGE_FILE_BYTES_REVERSED_HI	0x8000	Big endian: the MSB precedes the LSB in memory. This flag is deprecated and should be zero.

3.4Optional Header (Image Only)

Every image file has an optional headerthat provides information to the loader. This header is optional in the sensethat some files (specifically, object files) do not have it. For image files,this header is required. An object file can have an optional header, butgenerally this header has no function in an object file except to increase its size.

Note that the size of the optional headeris not fixed. The SizeOfOptionalHeader field in the COFF header must be used tovalidate that a probe into the file for a particular data directory does not gobeyond SizeOfOptionalHeader. For more information, see section 3.3, “COFF FileHeader (Object and Image).”

The NumberOfRvaAndSizes field of the optionalheader should also be used to ensure that no probe for a particular data directoryentry goes beyond the optional header. In addition, it is important to validatethe optional header magic number for format compatibility.

The optional header magic numberdetermines whether an image is a PE32 or PE32+ executable.

Magic number	PE format
0x10b	PE32
0x20b	PE32+

 

PE32+ images allow for a 64-bit addressspace while limiting the image size to 2 gigabytes. Other PE32+modifications are addressed in their respective sections.

The optional header itself has threemajor parts.

Offset (PE32/PE32+)	Size (PE32/PE32+)	Header part	Description
0	28/24	Standard fields	Fields that are defined for all implementations of COFF, including UNIX.
28/24	68/88	Windows-specific fields	Additional fields to support specific features of Windows (for example, subsystems).
96/112	Variable	Data directories	Address/size pairs for special tables that are found in the image file and are used by the operating system (for example, the import table and the export table).

3.4.1OptionalHeader Standard Fields (Image Only)

The first eight fields of the optional headerare standard fields that are defined for every implementation of COFF. Thesefields contain general information that is useful for loading and running anexecutable file. They are unchanged for the PE32+ format.

Offset	Size	Field	Description
0	2	Magic	The unsigned integer that identifies the state of the image file. The most common number is 0x10B, which identifies it as a normal executable file. 0x107 identifies it as a ROM image, and 0x20B identifies it as a PE32+ executable.
2	1	MajorLinkerVersion	The linker major version number.
3	1	MinorLinkerVersion	The linker minor version number.
4	4	SizeOfCode	The size of the code (text) section, or the sum of all code sections if there are multiple sections.
8	4	SizeOfInitializedData	The size of the initialized data section, or the sum of all such sections if there are multiple data sections.
12	4	SizeOfUninitializedData	The size of the uninitialized data section (BSS), or the sum of all such sections if there are multiple BSS sections.
16	4	AddressOfEntryPoint	The address of the entry point relative to the image base when the executable file is loaded into memory. For program images, this is the starting address. For device drivers, this is the address of the initialization function. An entry point is optional for DLLs. When no entry point is present, this field must be zero.
20	4	BaseOfCode	The address that is relative to the image base of the beginning-of-code section when it is loaded into memory.

 

PE32 contains this additional field, whichis absent in PE32+, following BaseOfCode.

Offset	Size	Field	Description
24	4	BaseOfData	The address that is relative to the image base of the beginning-of-data section when it is loaded into memory.

3.4.2Optional Header Windows-Specific Fields (Image Only)

The next 21 fields are an extension tothe COFF optional header format. They contain additional information that isrequired by the linker and loader in Windows.

Offset (PE32/ PE32+)	Size (PE32/ PE32+)	Field	Description
28/24	4/8	ImageBase	The preferred address of the first byte of image when loaded into memory; must be a multiple of 64 K. The default for DLLs is 0x10000000. The default for Windows CE EXEs is 0x00010000. The default for Windows NT, Windows 2000, Windows XP, Windows 95, Windows 98, and Windows Me is 0x00400000.
32/32	4	SectionAlignment	The alignment (in bytes) of sections when they are loaded into memory. It must be greater than or equal to FileAlignment. The default is the page size for the architecture.
36/36	4	FileAlignment	The alignment factor (in bytes) that is used to align the raw data of sections in the image file. The value should be a power of 2 between 512 and 64 K, inclusive. The default is 512. If the SectionAlignment is less than the architecture’s page size, then FileAlignment must match SectionAlignment.
40/40	2	MajorOperatingSystemVersion	The major version number of the required operating system.
42/42	2	MinorOperatingSystemVersion	The minor version number of the required operating system.
44/44	2	MajorImageVersion	The major version number of the image.
46/46	2	MinorImageVersion	The minor version number of the image.
48/48	2	MajorSubsystemVersion	The major version number of the subsystem.
50/50	2	MinorSubsystemVersion	The minor version number of the subsystem.
52/52	4	Win32VersionValue	Reserved, must be zero.
56/56	4	SizeOfImage	The size (in bytes) of the image, including all headers, as the image is loaded in memory. It must be a multiple of SectionAlignment.
60/60	4	SizeOfHeaders	The combined size of an MS‑DOS stub, PE header, and section headers rounded up to a multiple of FileAlignment.
64/64	4	CheckSum	The image file checksum. The algorithm for computing the checksum is incorporated into IMAGHELP.DLL. The following are checked for validation at load time: all drivers, any DLL loaded at boot time, and any DLL that is loaded into a critical Windows process.
68/68	2	Subsystem	The subsystem that is required to run this image. For more information, see “Windows Subsystem” later in this specification.
70/70	2	DllCharacteristics	For more information, see “DLL Characteristics” later in this specification.
72/72	4/8	SizeOfStackReserve	The size of the stack to reserve. Only SizeOfStackCommit is committed; the rest is made available one page at a time until the reserve size is reached.
76/80	4/8	SizeOfStackCommit	The size of the stack to commit.
80/88	4/8	SizeOfHeapReserve	The size of the local heap space to reserve. Only SizeOfHeapCommit is committed; the rest is made available one page at a time until the reserve size is reached.
84/96	4/8	SizeOfHeapCommit	The size of the local heap space to commit.
88/104	4	LoaderFlags	Reserved, must be zero.
92/108	4	NumberOfRvaAndSizes	The number of data-directory entries in the remainder of the optional header. Each describes a location and size.

Windows Subsystem

The following values defined for theSubsystem field of the optional header determine which Windows subsystem (ifany) is required to run the image.

Constant	Value	Description
IMAGE_SUBSYSTEM_UNKNOWN	0	An unknown subsystem
IMAGE_SUBSYSTEM_NATIVE	1	Device drivers and native Windows processes
IMAGE_SUBSYSTEM_WINDOWS_GUI	2	The Windows graphical user interface (GUI) subsystem
IMAGE_SUBSYSTEM_WINDOWS_CUI	3	The Windows character subsystem
IMAGE_SUBSYSTEM_POSIX_CUI	7	The Posix character subsystem
IMAGE_SUBSYSTEM_WINDOWS_CE_GUI	9	Windows CE
IMAGE_SUBSYSTEM_EFI_APPLICATION	10	An Extensible Firmware Interface (EFI) application
IMAGE_SUBSYSTEM_EFI_BOOT_ SERVICE_DRIVER	11	An EFI driver with boot services
IMAGE_SUBSYSTEM_EFI_RUNTIME_ DRIVER	12	An EFI driver with run-time services
IMAGE_SUBSYSTEM_EFI_ROM	13	An EFI ROM image
IMAGE_SUBSYSTEM_XBOX	14	XBOX

DLL Characteristics

The following values are defined for theDllCharacteristics field of the optional header.

Constant	Value	Description
	0x0001	Reserved, must be zero.
	0x0002	Reserved, must be zero.
	0x0004	Reserved, must be zero.
	0x0008	Reserved, must be zero.
IMAGE_DLLCHARACTERISTICS_HIGH_ENTROPY_VA	0x0020	Image can handle a high entropy 64-bit virtual address space.
IMAGE_DLLCHARACTERISTICS_ DYNAMIC_BASE	0x0040	DLL can be relocated at load time.
IMAGE_DLLCHARACTERISTICS_ FORCE_INTEGRITY	0x0080	Code Integrity checks are enforced.
IMAGE_DLLCHARACTERISTICS_ NX_COMPAT	0x0100	Image is NX compatible.
IMAGE_DLLCHARACTERISTICS_ NO_ISOLATION	0x0200	Isolation aware, but do not isolate the image.
IMAGE_DLLCHARACTERISTICS_ NO_SEH	0x0400	Does not use structured exception (SE) handling. No SE handler may be called in this image.
IMAGE_DLLCHARACTERISTICS_ NO_BIND	0x0800	Do not bind the image.
IMAGE_DLLCHARACTERISTICS_APPCONTAINER	0x1000	Image must execute in an AppContainer.
IMAGE_DLLCHARACTERISTICS_ WDM_DRIVER	0x2000	A WDM driver.
IMAGE_DLLCHARACTERISTICS_GUARD_CF	0x4000	Image supports Control Flow Guard.
IMAGE_DLLCHARACTERISTICS_ TERMINAL_SERVER_AWARE	0x8000	Terminal Server aware.

3.4.3Optional Header Data Directories (Image Only)

Each data directory gives the addressand size of a table or string that Windows uses. These data directory entriesare all loaded into memory so that the system can use them at run time. A datadirectory is an 8‑byte field that has the following declaration:

typedef struct _IMAGE_DATA_DIRECTORY {

   DWORD   VirtualAddress;

   DWORD   Size;

} IMAGE_DATA_DIRECTORY,*PIMAGE_DATA_DIRECTORY;

 

The first field, VirtualAddress, isactually the RVA of the table. The RVA is the address of the table relative tothe base address of the image when the table is loaded. The second field givesthe size in bytes. The data directories, which form the last part of the optionalheader, are listed in the following table.

Note that the number of directories isnot fixed. Before looking for a specific directory, check the NumberOfRvaAndSizesfield in the optional header.

Also, do not assume that the RVAs inthis table point to the beginning of a section or that the sections that containspecific tables have specific names.

Offset (PE/PE32+)	Size	Field	Description
96/112	8	Export Table	The export table address and size. For more information see section 6.3, “The .edata Section (Image Only).”
104/120	8	Import Table	The import table address and size. For more information, see section 6.4, “The .idata Section.”
112/128	8	Resource Table	The resource table address and size. For more information, see section 6.9, “The .rsrc Section.”
120/136	8	Exception Table	The exception table address and size. For more information, see section 6.5, “The .pdata Section.”
128/144	8	Certificate Table	The attribute certificate table address and size. For more information, see section 5.7, “The Attribute Certificate Table (Image Only).”
136/152	8	Base Relocation Table	The base relocation table address and size. For more information, see section 6.6, "The .reloc Section (Image Only)."
144/160	8	Debug	The debug data starting address and size. For more information, see section 6.1, “The .debug Section.”
152/168	8	Architecture	Reserved, must be 0
160/176	8	Global Ptr	The RVA of the value to be stored in the global pointer register. The size member of this structure must be set to zero.
168/184	8	TLS Table	The thread local storage (TLS) table address and size. For more information, see section 6.7, “The .tls Section.”
176/192	8	Load Config Table	The load configuration table address and size. For more information, see section 6.8, “The Load Configuration Structure (Image Only).”
184/200	8	Bound Import	The bound import table address and size.
192/208	8	IAT	The import address table address and size. For more information, see section 6.4.4, “Import Address Table.”
200/216	8	Delay Import Descriptor	The delay import descriptor address and size. For more information, see section 5.8, “Delay-Load Import Tables (Image Only).”
208/224	8	CLR Runtime Header	The CLR runtime header address and size. For more information, see section 6.10, “The .cormeta Section (Object Only).”
216/232	8	Reserved, must be zero

 

The Certificate Table entry points to atable of attribute certificates. These certificates are not loaded into memoryas part of the image. As such, the first field of this entry, which is normallyan RVA, is a file pointer instead.

4 Section Table (Section Headers)

Each row of the section table is, ineffect, a section header. This table immediately follows the optional header,if any. This positioning is required because the file header does not contain adirect pointer to the section table. Instead, the location of the section tableis determined by calculating the location of the first byte after the headers. Makesure to use the size of the optional header as specified in the file header.

The number of entries in the section tableis given by the NumberOfSections field in the file header. Entries in the sectiontable are numbered starting from one (1). The code and data memory sectionentries are in the order chosen by the linker.

In an image file, the VAs for sectionsmust be assigned by the linker so that they are in ascending order and adjacent,and they must be a multiple of the SectionAlignment value in the optionalheader.

Each section header (section tableentry) has the following format, for a total of 40 bytes per entry.

Offset	Size	Field	Description
0	8	Name	An 8-byte, null-padded UTF-8 encoded string. If the string is exactly 8 characters long, there is no terminating null. For longer names, this field contains a slash (/) that is followed by an ASCII representation of a decimal number that is an offset into the string table. Executable images do not use a string table and do not support section names longer than 8 characters. Long names in object files are truncated if they are emitted to an executable file.
8	4	VirtualSize	The total size of the section when loaded into memory. If this value is greater than SizeOfRawData, the section is zero-padded. This field is valid only for executable images and should be set to zero for object files.
12	4	VirtualAddress	For executable images, the address of the first byte of the section relative to the image base when the section is loaded into memory. For object files, this field is the address of the first byte before relocation is applied; for simplicity, compilers should set this to zero. Otherwise, it is an arbitrary value that is subtracted from offsets during relocation.
16	4	SizeOfRawData	The size of the section (for object files) or the size of the initialized data on disk (for image files). For executable images, this must be a multiple of FileAlignment from the optional header. If this is less than VirtualSize, the remainder of the section is zero-filled. Because the SizeOfRawData field is rounded but the VirtualSize field is not, it is possible for SizeOfRawData to be greater than VirtualSize as well. When a section contains only uninitialized data, this field should be zero.
20	4	PointerToRawData	The file pointer to the first page of the section within the COFF file. For executable images, this must be a multiple of FileAlignment from the optional header. For object files, the value should be aligned on a 4‑byte boundary for best performance. When a section contains only uninitialized data, this field should be zero.
24	4	PointerToRelocations	The file pointer to the beginning of relocation entries for the section. This is set to zero for executable images or if there are no relocations.
28	4	PointerToLinenumbers	The file pointer to the beginning of line-number entries for the section. This is set to zero if there are no COFF line numbers. This value should be zero for an image because COFF debugging information is deprecated.
32	2	NumberOfRelocations	The number of relocation entries for the section. This is set to zero for executable images.
34	2	NumberOfLinenumbers	The number of line-number entries for the section. This value should be zero for an image because COFF debugging information is deprecated.
36	4	Characteristics	The flags that describe the characteristics of the section. For more information, see section 4.1, “Section Flags.”

4.1Section Flags

The section flags in the Characteristicsfield of the section header indicate characteristics of the section.

Flag	Value	Description
	0x00000000	Reserved for future use.
	0x00000001	Reserved for future use.
	0x00000002	Reserved for future use.
	0x00000004	Reserved for future use.
IMAGE_SCN_TYPE_NO_PAD	0x00000008	The section should not be padded to the next boundary. This flag is obsolete and is replaced by IMAGE_SCN_ALIGN_1BYTES. This is valid only for object files.
	0x00000010	Reserved for future use.
IMAGE_SCN_CNT_CODE	0x00000020	The section contains executable code.
IMAGE_SCN_CNT_INITIALIZED_DATA	0x00000040	The section contains initialized data.
IMAGE_SCN_CNT_UNINITIALIZED_ DATA	0x00000080	The section contains uninitialized data.
IMAGE_SCN_LNK_OTHER	0x00000100	Reserved for future use.
IMAGE_SCN_LNK_INFO	0x00000200	The section contains comments or other information. The .drectve section has this type. This is valid for object files only.
	0x00000400	Reserved for future use.
IMAGE_SCN_LNK_REMOVE	0x00000800	The section will not become part of the image. This is valid only for object files.
IMAGE_SCN_LNK_COMDAT	0x00001000	The section contains COMDAT data. For more information, see section 5.5.6, “COMDAT Sections (Object Only).” This is valid only for object files.
IMAGE_SCN_GPREL	0x00008000	The section contains data referenced through the global pointer (GP).
IMAGE_SCN_MEM_PURGEABLE	0x00020000	Reserved for future use.
IMAGE_SCN_MEM_16BIT	0x00020000	Reserved for future use.
IMAGE_SCN_MEM_LOCKED	0x00040000	Reserved for future use.
IMAGE_SCN_MEM_PRELOAD	0x00080000	Reserved for future use.
IMAGE_SCN_ALIGN_1BYTES	0x00100000	Align data on a 1-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_2BYTES	0x00200000	Align data on a 2-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_4BYTES	0x00300000	Align data on a 4-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_8BYTES	0x00400000	Align data on an 8-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_16BYTES	0x00500000	Align data on a 16-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_32BYTES	0x00600000	Align data on a 32-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_64BYTES	0x00700000	Align data on a 64-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_128BYTES	0x00800000	Align data on a 128-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_256BYTES	0x00900000	Align data on a 256-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_512BYTES	0x00A00000	Align data on a 512-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_1024BYTES	0x00B00000	Align data on a 1024-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_2048BYTES	0x00C00000	Align data on a 2048-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_4096BYTES	0x00D00000	Align data on a 4096-byte boundary. Valid only for object files.
IMAGE_SCN_ALIGN_8192BYTES	0x00E00000	Align data on an 8192-byte boundary. Valid only for object files.
IMAGE_SCN_LNK_NRELOC_OVFL	0x01000000	The section contains extended relocations.
IMAGE_SCN_MEM_DISCARDABLE	0x02000000	The section can be discarded as needed.
IMAGE_SCN_MEM_NOT_CACHED	0x04000000	The section cannot be cached.
IMAGE_SCN_MEM_NOT_PAGED	0x08000000	The section is not pageable.
IMAGE_SCN_MEM_SHARED	0x10000000	The section can be shared in memory.
IMAGE_SCN_MEM_EXECUTE	0x20000000	The section can be executed as code.
IMAGE_SCN_MEM_READ	0x40000000	The section can be read.
IMAGE_SCN_MEM_WRITE	0x80000000	The section can be written to.

 

IMAGE_SCN_LNK_NRELOC_OVFL indicates thatthe count of relocations for the section exceeds the 16 bits that are reservedfor it in the section header. If the bit is set and the NumberOfRelocationsfield in the section header is 0xffff, the actual relocation count is stored inthe 32-bit VirtualAddress field of the first relocation. It is an error ifIMAGE_SCN_LNK_NRELOC_OVFL is set and there are fewer than 0xffff relocations inthe section.

4.2Grouped Sections (Object Only)

The “$” character (dollar sign) has aspecial interpretation in section names in object files.

When determining the image section thatwill contain the contents of an object section, the linker discards the “$” andall characters that follow it. Thus, an object section named.text$Xactually contributes to the .text section in the image.

However, the characters following the “$”determine the ordering of the contributions to the image section. Allcontributions with the same object-section name are allocated contiguously inthe image, and the blocks of contributions are sorted in lexical order byobject-section name. Therefore, everything in object files with section name.text$Xends up together, after the .text$W contributions and before the.text$Ycontributions.

The section name in an image file nevercontains a “$” character.

5 Other Contents of the File

The data structures that were describedso far, up to and including the optional header, are all located at a fixedoffset from the beginning of the file (or from the PE header if the file is animage that contains an MS‑DOS stub).

The remainder of a COFF object or imagefile contains blocks of data that are not necessarily at any specific fileoffset. Instead, the locations are defined by pointers in the optional headeror a section header.

An exception is for images with aSectionAlignment value of less than the page size of the architecture (4 Kfor Intel x86 and for MIPS, and 8 K for Itanium). For a description ofSectionAlignment, see section 3.4, "Optional Header (Image Only)." Inthis case, there are constraints on the file offset of the section data, asdescribed in section 5.1, "Section Data." Another exception is thatattribute certificate and debug information must be placed at the very end ofan image file, with the attribute certificate table immediately preceding thedebug section, because the loader does not map these into memory. The rule aboutattribute certificate and debug information does not apply to object files,however.

5.1Section Data

Initialized data for a section consistsof simple blocks of bytes. However, for sections that contain all zeros, thesection data need not be included.

The data for each section is located atthe file offset that was given by the PointerToRawData field in the sectionheader. The size of this data in the file is indicated by the SizeOfRawDatafield. If SizeOfRawData is less than VirtualSize, the remainder is padded withzeros.

In an image file, the section data mustbe aligned on a boundary as specified by the FileAlignment field in the optionalheader. Section data must appear in order of the RVA values for thecorresponding sections (as do the individual section headers in the section table).

There are additional restrictions onimage files if the SectionAlignment value in the optional header is less thanthe page size of the architecture. For such files, the location of section datain the file must match its location in memory when the image is loaded, so thatthe physical offset for section data is the same as the RVA.

5.2 COFFRelocations (Object Only)

Object files contain COFF relocations,which specify how the section data should be modified when placed in the imagefile and subsequently loaded into memory.

Image files do not contain COFFrelocations because all referenced symbols have already been assigned addressesin a flat address space. An image contains relocation information in the formof base relocations in the .reloc section (unless the image has theIMAGE_FILE_RELOCS_STRIPPED attribute). For more information, see section 6.6,"The .reloc Section (Image Only)."

For each section in an object file, anarray of fixed-length records holds the section’s COFF relocations. Theposition and length of the array are specified in the section header. Eachelement of the array has the following format.

Offset	Size	Field	Description
0	4	VirtualAddress	The address of the item to which relocation is applied. This is the offset from the beginning of the section, plus the value of the section’s RVA/Offset field. See section 4, “Section Table (Section Headers).” For example, if the first byte of the section has an address of 0x10, the third byte has an address of 0x12.
4	4	SymbolTableIndex	A zero-based index into the symbol table. This symbol gives the address that is to be used for the relocation. If the specified symbol has section storage class, then the symbol’s address is the address with the first section of the same name.
8	2	Type	A value that indicates the kind of relocation that should be performed. Valid relocation types depend on machine type. See section 5.2.1, “Type Indicators.”

 

If the symbol referred to by theSymbolTableIndex field has the storage class IMAGE_SYM_CLASS_SECTION, thesymbol’s address is the beginning of the section. The section is usually in thesame file, except when the object file is part of an archive (library). In thatcase, the section can be found in any other object file in the archive that hasthe same archive-member name as the current object file. (The relationship withthe archive-member name is used in the linking of import tables, that is, the .idatasection.)

5.2.1 TypeIndicators

The Type field of the relocation recordindicates what kind of relocation should be performed. Different relocationtypes are defined for each type of machine.

x64 Processors

The following relocation type indicatorsare defined for x64 and compatible processors.

Constant	Value	Description
IMAGE_REL_AMD64_ABSOLUTE	0x0000	The relocation is ignored.
IMAGE_REL_AMD64_ADDR64	0x0001	The 64-bit VA of the relocation target.
IMAGE_REL_AMD64_ADDR32	0x0002	The 32-bit VA of the relocation target.
IMAGE_REL_AMD64_ADDR32NB	0x0003	The 32-bit address without an image base (RVA).
IMAGE_REL_AMD64_REL32	0x0004	The 32-bit relative address from the byte following the relocation.
IMAGE_REL_AMD64_REL32_1	0x0005	The 32-bit address relative to byte distance 1 from the relocation.
IMAGE_REL_AMD64_REL32_2	0x0006	The 32-bit address relative to byte distance 2 from the relocation.
IMAGE_REL_AMD64_REL32_3	0x0007	The 32-bit address relative to byte distance 3 from the relocation.
IMAGE_REL_AMD64_REL32_4	0x0008	The 32-bit address relative to byte distance 4 from the relocation.
IMAGE_REL_AMD64_REL32_5	0x0009	The 32-bit address relative to byte distance 5 from the relocation.
IMAGE_REL_AMD64_SECTION	0x000A	The 16-bit section index of the section that contains the target. This is used to support debugging information.
IMAGE_REL_AMD64_SECREL	0x000B	The 32-bit offset of the target from the beginning of its section. This is used to support debugging information and static thread local storage.
IMAGE_REL_AMD64_SECREL7	0x000C	A 7-bit unsigned offset from the base of the section that contains the target.
IMAGE_REL_AMD64_TOKEN	0x000D	CLR tokens.
IMAGE_REL_AMD64_SREL32	0x000E	A 32-bit signed span-dependent value emitted into the object.
IMAGE_REL_AMD64_PAIR	0x000F	A pair that must immediately follow every span-dependent value.
IMAGE_REL_AMD64_SSPAN32	0x0010	A 32-bit signed span-dependent value that is applied at link time.

ARM Processors

The following relocation type indicatorsare defined for ARM processors.

Constant	Value	Description
IMAGE_REL_ARM_ABSOLUTE	0x0000	The relocation is ignored.
IMAGE_REL_ARM_ADDR32	0x0001	The 32-bit VA of the target.
IMAGE_REL_ARM_ADDR32NB	0x0002	The 32-bit RVA of the target.
IMAGE_REL_ARM_BRANCH24	0x0003	The 24-bit relative displacement to the target.
IMAGE_REL_ARM_BRANCH11	0x0004	The reference to a subroutine call. The reference consists of two 16-bit instructions with 11-bit offsets.
IMAGE_REL_ARM_SECTION	0x000E	The 16-bit section index of the section that contains the target. This is used to support debugging information.
IMAGE_REL_ARM_SECREL	0x000F	The 32-bit offset of the target from the beginning of its section. This is used to support debugging information and static thread local storage.
IMAGE_REL_ARM_MOV32	0x0010	The 32-bit VA of the target. This relocation is applied using a MOVW instruction for the low 16 bits followed by a MOVT for the high 16 bits.
IMAGE_REL_THUMB_MOV32	0x0011	The 32-bit VA of the target. This relocation is applied using a MOVW instruction for the low 16 bits followed by a MOVT for the high 16 bits.
IMAGE_REL_THUMB_BRANCH20	0x0012	The instruction is fixed up with the 21-bit relative displacement to the 2-byte aligned target. The least significant bit of the displacement is always zero and is not stored. This relocation corresponds to a Thumb-2 32-bit conditional B instruction.
Unused	0x0013
IMAGE_REL_THUMB_BRANCH24	0x0014	The instruction is fixed up with the 25-bit relative displacement to the 2-byte aligned target. The least significant bit of the displacement is zero and is not stored.This relocation corresponds to a Thumb-2 B instruction.
IMAGE_REL_THUMB_BLX23	0x0015	The instruction is fixed up with the 25-bit relative displacement to the 4-byte aligned target. The low 2 bits of the displacement are zero and are not stored. This relocation corresponds to a Thumb-2 BLX instruction.
IMAGE_REL_ARM_PAIR	0x0016	The relocation is valid only when it immediately follows a ARM_REFHI or THUMB_REFHI. Its SymbolTableIndex contains a displacement and not an index into the symbol table.

Hitachi SuperH Processors

The following relocation type indicatorsare defined for SH3 and SH4 processors. SH5-specific relocations are noted asSHM (SH Media).

Constant	Value	Description
IMAGE_REL_SH3_ABSOLUTE	0x0000	The relocation is ignored.
IMAGE_REL_SH3_DIRECT16	0x0001	A reference to the 16-bit location that contains the VA of the target symbol.
IMAGE_REL_SH3_DIRECT32	0x0002	The 32-bit VA of the target symbol.
IMAGE_REL_SH3_DIRECT8	0x0003	A reference to the 8-bit location that contains the VA of the target symbol.
IMAGE_REL_SH3_DIRECT8_WORD	0x0004	A reference to the 8-bit instruction that contains the effective 16-bit VA of the target symbol.
IMAGE_REL_SH3_DIRECT8_LONG	0x0005	A reference to the 8-bit instruction that contains the effective 32-bit VA of the target symbol.
IMAGE_REL_SH3_DIRECT4	0x0006	A reference to the 8-bit location whose low 4 bits contain the VA of the target symbol.
IMAGE_REL_SH3_DIRECT4_WORD	0x0007	A reference to the 8-bit instruction whose low 4 bits contain the effective 16-bit VA of the target symbol.
IMAGE_REL_SH3_DIRECT4_LONG	0x0008	A reference to the 8-bit instruction whose low 4 bits contain the effective 32-bit VA of the target symbol.
IMAGE_REL_SH3_PCREL8_WORD	0x0009	A reference to the 8-bit instruction that contains the effective 16-bit relative offset of the target symbol.
IMAGE_REL_SH3_PCREL8_LONG	0x000A	A reference to the 8-bit instruction that contains the effective 32-bit relative offset of the target symbol.
IMAGE_REL_SH3_PCREL12_WORD	0x000B	A reference to the 16-bit instruction whose low 12 bits contain the effective 16-bit relative offset of the target symbol.
IMAGE_REL_SH3_STARTOF_SECTION	0x000C	A reference to a 32-bit location that is the VA of the section that contains the target symbol.
IMAGE_REL_SH3_SIZEOF_SECTION	0x000D	A reference to the 32-bit location that is the size of the section that contains the target symbol.
IMAGE_REL_SH3_SECTION	0x000E	The 16-bit section index of the section that contains the target. This is used to support debugging information.
IMAGE_REL_SH3_SECREL	0x000F	The 32-bit offset of the target from the beginning of its section. This is used to support debugging information and static thread local storage.
IMAGE_REL_SH3_DIRECT32_NB	0x0010	The 32-bit RVA of the target symbol.
IMAGE_REL_SH3_GPREL4_LONG	0x0011	GP relative.
IMAGE_REL_SH3_TOKEN	0x0012	CLR token.
IMAGE_REL_SHM_PCRELPT	0x0013	The offset from the current instruction in longwords. If the NOMODE bit is not set, insert the inverse of the low bit at bit 32 to select PTA or PTB.
IMAGE_REL_SHM_REFLO	0x0014	The low 16 bits of the 32-bit address.
IMAGE_REL_SHM_REFHALF	0x0015	The high 16 bits of the 32-bit address.
IMAGE_REL_SHM_RELLO	0x0016	The low 16 bits of the relative address.
IMAGE_REL_SHM_RELHALF	0x0017	The high 16 bits of the relative address.
IMAGE_REL_SHM_PAIR	0x0018	The relocation is valid only when it immediately follows a REFHALF, RELHALF, or RELLO relocation. The SymbolTableIndex field of the relocation contains a displacement and not an index into the symbol table.
IMAGE_REL_SHM_NOMODE	0x8000	The relocation ignores section mode.

IBM PowerPC Processors

The following relocation type indicatorsare defined for PowerPC processors.

Constant	Value	Description
IMAGE_REL_PPC_ABSOLUTE	0x0000	The relocation is ignored.
IMAGE_REL_PPC_ADDR64	0x0001	The 64-bit VA of the target.
IMAGE_REL_PPC_ADDR32	0x0002	The 32-bit VA of the target.
IMAGE_REL_PPC_ADDR24	0x0003	The low 24 bits of the VA of the target. This is valid only when the target symbol is absolute and can be sign-extended to its original value.
IMAGE_REL_PPC_ADDR16	0x0004	The low 16 bits of the target’s VA.
IMAGE_REL_PPC_ADDR14	0x0005	The low 14 bits of the target’s VA. This is valid only when the target symbol is absolute and can be sign-extended to its original value.
IMAGE_REL_PPC_REL24	0x0006	A 24-bit PC-relative offset to the symbol’s location.
IMAGE_REL_PPC_REL14	0x0007	A 14-bit PC-relative offset to the symbol’s location.
IMAGE_REL_PPC_ADDR32NB	0x000A	The 32-bit RVA of the target.
IMAGE_REL_PPC_SECREL	0x000B	The 32-bit offset of the target from the beginning of its section. This is used to support debugging information and static thread local storage.
IMAGE_REL_PPC_SECTION	0x000C	The 16-bit section index of the section that contains the target. This is used to support debugging information.
IMAGE_REL_PPC_SECREL16	0x000F	The 16-bit offset of the target from the beginning of its section. This is used to support debugging information and static thread local storage.
IMAGE_REL_PPC_REFHI	0x0010	The high 16 bits of the target’s 32-bit VA. This is used for the first instruction in a two-instruction sequence that loads a full address. This relocation must be immediately followed by a PAIR relocation whose SymbolTableIndex contains a signed 16-bit displacement that is added to the upper 16 bits that was taken from the location that is being relocated.
IMAGE_REL_PPC_REFLO	0x0011	The low 16 bits of the target’s VA.
IMAGE_REL_PPC_PAIR	0x0012	A relocation that is valid only when it immediately follows a REFHI or SECRELHI relocation. Its SymbolTableIndex contains a displacement and not an index into the symbol table.
IMAGE_REL_PPC_SECRELLO	0x0013	The low 16 bits of the 32-bit offset of the target from the beginning of its section.
IMAGE_REL_PPC_GPREL	0x0015	The 16-bit signed displacement of the target relative to the GP register.
IMAGE_REL_PPC_TOKEN	0x0016	The CLR token.

Intel 386 Processors

The following relocation type indicatorsare defined for Intel 386 and compatible processors.

Constant	Value	Description
IMAGE_REL_I386_ABSOLUTE	0x0000	The relocation is ignored.
IMAGE_REL_I386_DIR16	0x0001	Not supported.
IMAGE_REL_I386_REL16	0x0002	Not supported.
IMAGE_REL_I386_DIR32	0x0006	The target’s 32-bit VA.
IMAGE_REL_I386_DIR32NB	0x0007	The target’s 32-bit RVA.
IMAGE_REL_I386_SEG12	0x0009	Not supported.
IMAGE_REL_I386_SECTION	0x000A	The 16-bit section index of the section that contains the target. This is used to support debugging information.
IMAGE_REL_I386_SECREL	0x000B	The 32-bit offset of the target from the beginning of its section. This is used to support debugging information and static thread local storage.
IMAGE_REL_I386_TOKEN	0x000C	The CLR token.
IMAGE_REL_I386_SECREL7	0x000D	A 7-bit offset from the base of the section that contains the target.
IMAGE_REL_I386_REL32	0x0014	The 32-bit relative displacement to the target. This supports the x86 relative branch and call instructions.

Intel Itanium Processor Family (IPF)

The following relocation type indicatorsare defined for the Intel Itanium processor family and compatible processors. Notethat relocations oninstructions usethe bundle’s offset and slot number for the relocation offset.

Constant	Value	Description
IMAGE_REL_IA64_ABSOLUTE	0x0000	The relocation is ignored.
IMAGE_REL_IA64_IMM14	0x0001	The instruction relocation can be followed by an ADDEND relocation whose value is added to the target address before it is inserted into the specified slot in the IMM14 bundle. The relocation target must be absolute or the image must be fixed.
IMAGE_REL_IA64_IMM22	0x0002	The instruction relocation can be followed by an ADDEND relocation whose value is added to the target address before it is inserted into the specified slot in the IMM22 bundle. The relocation target must be absolute or the image must be fixed.
IMAGE_REL_IA64_IMM64	0x0003	The slot number of this relocation must be one (1). The relocation can be followed by an ADDEND relocation whose value is added to the target address before it is stored in all three slots of the IMM64 bundle.
IMAGE_REL_IA64_DIR32	0x0004	The target’s 32-bit VA. This is supported only for /LARGEADDRESSAWARE:NO images.
IMAGE_REL_IA64_DIR64	0x0005	The target’s 64-bit VA.
IMAGE_REL_IA64_PCREL21B	0x0006	The instruction is fixed up with the 25-bit relative displacement to the 16-bit aligned target. The low 4 bits of the displacement are zero and are not stored.
IMAGE_REL_IA64_PCREL21M	0x0007	The instruction is fixed up with the 25-bit relative displacement to the 16-bit aligned target. The low 4 bits of the displacement, which are zero, are not stored.
IMAGE_REL_IA64_PCREL21F	0x0008	The LSBs of this relocation’s offset must contain the slot number whereas the rest is the bundle address. The bundle is fixed up with the 25-bit relative displacement to the 16-bit aligned target. The low 4 bits of the displacement are zero and are not stored.
IMAGE_REL_IA64_GPREL22	0x0009	The instruction relocation can be followed by an ADDEND relocation whose value is added to the target address and then a 22-bit GP-relative offset that is calculated and applied to the GPREL22 bundle.
IMAGE_REL_IA64_LTOFF22	0x000A	The instruction is fixed up with the 22-bit GP-relative offset to the target symbol’s literal table entry. The linker creates this literal table entry based on this relocation and the ADDEND relocation that might follow.
IMAGE_REL_IA64_SECTION	0x000B	The 16-bit section index of the section contains the target. This is used to support debugging information.
IMAGE_REL_IA64_SECREL22	0x000C	The instruction is fixed up with the 22-bit offset of the target from the beginning of its section. This relocation can be followed immediately by an ADDEND relocation, whose Value field contains the 32-bit unsigned offset of the target from the beginning of the section.
IMAGE_REL_IA64_SECREL64I	0x000D	The slot number for this relocation must be one (1). The instruction is fixed up with the 64-bit offset of the target from the beginning of its section. This relocation can be followed immediately by an ADDEND relocation whose Value field contains the 32-bit unsigned offset of the target from the beginning of the section.
IMAGE_REL_IA64_SECREL32	0x000E	The address of data to be fixed up with the 32-bit offset of the target from the beginning of its section.
IMAGE_REL_IA64_DIR32NB	0x0010	The target’s 32-bit RVA.
IMAGE_REL_IA64_SREL14	0x0011	This is applied to a signed 14-bit immediate that contains the difference between two relocatable targets. This is a declarative field for the linker that indicates that the compiler has already emitted this value.
IMAGE_REL_IA64_SREL22	0x0012	This is applied to a signed 22-bit immediate that contains the difference between two relocatable targets. This is a declarative field for the linker that indicates that the compiler has already emitted this value.
IMAGE_REL_IA64_SREL32	0x0013	This is applied to a signed 32-bit immediate that contains the difference between two relocatable values. This is a declarative field for the linker that indicates that the compiler has already emitted this value.
IMAGE_REL_IA64_UREL32	0x0014	This is applied to an unsigned 32-bit immediate that contains the difference between two relocatable values. This is a declarative field for the linker that indicates that the compiler has already emitted this value.
IMAGE_REL_IA64_PCREL60X	0x0015	A 60-bit PC-relative fixup that always stays as a BRL instruction of an MLX bundle.
IMAGE_REL_IA64_PCREL60B	0x0016	A 60-bit PC-relative fixup. If the target displacement fits in a signed 25-bit field, convert the entire bundle to an MBB bundle with NOP.B in slot 1 and a 25-bit BR instruction (with the 4 lowest bits all zero and dropped) in slot 2.
IMAGE_REL_IA64_PCREL60F	0x0017	A 60-bit PC-relative fixup. If the target displacement fits in a signed 25-bit field, convert the entire bundle to an MFB bundle with NOP.F in slot 1 and a 25-bit (4 lowest bits all zero and dropped) BR instruction in slot 2.
IMAGE_REL_IA64_PCREL60I	0x0018	A 60-bit PC-relative fixup. If the target displacement fits in a signed 25-bit field, convert the entire bundle to an MIB bundle with NOP.I in slot 1 and a 25-bit (4 lowest bits all zero and dropped) BR instruction in slot 2.
IMAGE_REL_IA64_PCREL60M	0x0019	A 60-bit PC-relative fixup. If the target displacement fits in a signed 25-bit field, convert the entire bundle to an MMB bundle with NOP.M in slot 1 and a 25-bit (4 lowest bits all zero and dropped) BR instruction in slot 2.
IMAGE_REL_IA64_IMMGPREL64	0x001a	A 64-bit GP-relative fixup.
IMAGE_REL_IA64_TOKEN	0x001b	A CLR token.
IMAGE_REL_IA64_GPREL32	0x001c	A 32-bit GP-relative fixup.
IMAGE_REL_IA64_ADDEND	0x001F	The relocation is valid only when it immediately follows one of the following relocations: IMM14, IMM22, IMM64, GPREL22, LTOFF22, LTOFF64, SECREL22, SECREL64I, or SECREL32. Its value contains the addend to apply to instructions within a bundle, not for data.

MIPS Processors

The following relocation type indicatorsare defined for MIPS processors.

Constant	Value	Description
IMAGE_REL_MIPS_ABSOLUTE	0x0000	The relocation is ignored.
IMAGE_REL_MIPS_REFHALF	0x0001	The high 16 bits of the target’s 32-bit VA.
IMAGE_REL_MIPS_REFWORD	0x0002	The target’s 32-bit VA.
IMAGE_REL_MIPS_JMPADDR	0x0003	The low 26 bits of the target’s VA. This supports the MIPS J and JAL instructions.
IMAGE_REL_MIPS_REFHI	0x0004	The high 16 bits of the target’s 32-bit VA. This is used for the first instruction in a two-instruction sequence that loads a full address. This relocation must be immediately followed by a PAIR relocation whose SymbolTableIndex contains a signed 16-bit displacement that is added to the upper 16 bits that are taken from the location that is being relocated.
IMAGE_REL_MIPS_REFLO	0x0005	The low 16 bits of the target’s VA.
IMAGE_REL_MIPS_GPREL	0x0006	A 16-bit signed displacement of the target relative to the GP register.
IMAGE_REL_MIPS_LITERAL	0x0007	The same as IMAGE_REL_MIPS_GPREL.
IMAGE_REL_MIPS_SECTION	0x000A	The 16-bit section index of the section contains the target. This is used to support debugging information.
IMAGE_REL_MIPS_SECREL	0x000B	The 32-bit offset of the target from the beginning of its section. This is used to support debugging information and static thread local storage.
IMAGE_REL_MIPS_SECRELLO	0x000C	The low 16 bits of the 32-bit offset of the target from the beginning of its section.
IMAGE_REL_MIPS_SECRELHI	0x000D	The high 16 bits of the 32-bit offset of the target from the beginning of its section. An IMAGE_REL_MIPS_PAIR relocation must immediately follow this one. The SymbolTableIndex of the PAIR relocation contains a signed 16-bit displacement that is added to the upper 16 bits that are taken from the location that is being relocated.
IMAGE_REL_MIPS_JMPADDR16	0x0010	The low 26 bits of the target’s VA. This supports the MIPS16 JAL instruction.
IMAGE_REL_MIPS_REFWORDNB	0x0022	The target’s 32-bit RVA.
IMAGE_REL_MIPS_PAIR	0x0025	The relocation is valid only when it immediately follows a REFHI or SECRELHI relocation. Its SymbolTableIndex contains a displacement and not an index into the symbol table.

Mitsubishi M32R

The following relocation type indicatorsare defined for the Mitsubishi M32R processors.

Constant	Value	Description
IMAGE_REL_M32R_ABSOLUTE	0x0000	The relocation is ignored.
IMAGE_REL_M32R_ADDR32	0x0001	The target’s 32-bit VA.
IMAGE_REL_M32R_ADDR32NB	0x0002	The target’s 32-bit RVA.
IMAGE_REL_M32R_ADDR24	0x0003	The target’s 24-bit VA.
IMAGE_REL_M32R_GPREL16	0x0004	The target’s 16-bit offset from the GP register.
IMAGE_REL_M32R_PCREL24	0x0005	The target’s 24-bit offset from the program counter (PC), shifted left by 2 bits and sign-extended
IMAGE_REL_M32R_PCREL16	0x0006	The target’s 16-bit offset from the PC, shifted left by 2 bits and sign-extended
IMAGE_REL_M32R_PCREL8	0x0007	The target’s 8-bit offset from the PC, shifted left by 2 bits and sign-extended
IMAGE_REL_M32R_REFHALF	0x0008	The 16 MSBs of the target VA.
IMAGE_REL_M32R_REFHI	0x0009	The 16 MSBs of the target VA, adjusted for LSB sign extension. This is used for the first instruction in a two-instruction sequence that loads a full 32-bit address. This relocation must be immediately followed by a PAIR relocation whose SymbolTableIndex contains a signed 16-bit displacement that is added to the upper 16 bits that are taken from the location that is being relocated.
IMAGE_REL_M32R_REFLO	0x000A	The 16 LSBs of the target VA.
IMAGE_REL_M32R_PAIR	0x000B	The relocation must follow the REFHI relocation. Its SymbolTableIndex contains a displacement and not an index into the symbol table.
IMAGE_REL_M32R_SECTION	0x000C	The 16-bit section index of the section that contains the target. This is used to support debugging information.
IMAGE_REL_M32R_SECREL	0x000D	The 32-bit offset of the target from the beginning of its section. This is used to support debugging information and static thread local storage.
IMAGE_REL_M32R_TOKEN	0x000E	The CLR token.

5.3 COFFLine Numbers (Deprecated)

COFF line numbers are no longer producedand, in the future, will not be consumed.

COFF line numbers indicate therelationship between code and line numbers in source files. The Microsoftformat for COFF line numbers is similar to standard COFF, but it has been extendedto allow a single section to relate to line numbers in multiple source files.

COFF line numbers consist of an array offixed-length records. The location (file offset) and size of the array arespecified in the section header. Each line-number record is of the followingformat.

Offset	Size	Field	Description
0	4	Type (*)	This is a union of two fields: SymbolTableIndex and VirtualAddress. Whether SymbolTableIndex or RVA is used depends on the value of Linenumber.
4	2	Linenumber	When nonzero, this field specifies a one-based line number. When zero, the Type field is interpreted as a symbol table index for a function.

 

The Type field is a union of two 4‑bytefields: SymbolTableIndex and VirtualAddress.

Offset	Size	Field	Description
0	4	SymbolTableIndex	Used when Linenumber is zero: index to symbol table entry for a function. This format is used to indicate the function to which a group of line-number records refers.
0	4	VirtualAddress	Used when Linenumber is non-zero: the RVA of the executable code that corresponds to the source line indicated. In an object file, this contains the VA within the section.

 

A line-number record can either set theLinenumber field to zero and point to a function definition in the symbol tableor it can work as a standard line-number entry by giving a positive integer(line number) and the corresponding address in the object code.

A group of line-number entries alwaysbegins with the first format: the index of a function symbol. If this is thefirst line-number record in the section, then it is also the COMDAT symbol namefor the function if the section’s COMDAT flag is set. See section 5.5.6,“COMDAT Sections (Object Only).” The function’s auxiliary record in the symbol tablehas a pointer to the Linenumber field that points to this same line-numberrecord.

A record that identifies a function isfollowed by any number of line-number entries that give actual line-numberinformation (that is, entries with Linenumber greater than zero). These entriesare one-based, relative to the beginning of the function, and represent everysource line in the function except for the first line.

For example, the first line-numberrecord for the following example would specify the ReverseSign function(SymbolTableIndex of ReverseSign and Linenumber set to zero). Then records withLinenumber values of 1, 2, and 3 would follow, corresponding to source lines asshown:

// some code precedes ReverseSignfunction

    int ReverseSign(int i)

1:  {

2:     return-1 * i;

3:  }

 

5.4 COFFSymbol Table

The symbol table in this section isinherited from the traditional COFF format. It is distinct from Microsoft VisualC++® debug information. A file can contain both a COFF symbol table and VisualC++ debug information, and the two are kept separate. Some Microsoft tools usethe symbol table for limited but important purposes, such as communicatingCOMDAT information to the linker. Section names and file names, as well as codeand data symbols, are listed in the symbol table.

The location of the symbol table isindicated in the COFF header.

The symbol table is an array of records,each 18 bytes long. Each record is either a standard or auxiliary symbol-tablerecord. A standard record defines a symbol or name and has the following format.

Offset	Size	Field	Description
0	8	Name (*)	The name of the symbol, represented by a union of three structures. An array of 8 bytes is used if the name is not more than 8 bytes long. For more information, see section 5.4.1, “Symbol Name Representation.”
8	4	Value	The value that is associated with the symbol. The interpretation of this field depends on SectionNumber and StorageClass. A typical meaning is the relocatable address.
12	2	SectionNumber	The signed integer that identifies the section, using a one-based index into the section table. Some values have special meaning, as defined in section 5.4.2, “Section Number Values.”
14	2	Type	A number that represents type. Microsoft tools set this field to 0x20 (function) or 0x0 (not a function). For more information, see section 5.4.3, “Type Representation.”
16	1	StorageClass	An enumerated value that represents storage class. For more information, see section 5.4.4, “Storage Class.”
17	1	NumberOfAuxSymbols	The number of auxiliary symbol table entries that follow this record.

 

Zero or more auxiliary symbol-tablerecords immediately follow each standard symbol-table record. However,typically not more than one auxiliary symbol-table record follows a standardsymbol-table record (except for .file records with long file names). Eachauxiliary record is the same size as a standard symbol-table record (18 bytes),but rather than define a new symbol, the auxiliary record gives additionalinformation on the last symbol defined. The choice of which of several formatsto use depends on the StorageClass field. Currently-defined formats forauxiliary symbol table records are shown in section 5.5, “Auxiliary SymbolRecords.”

Tools that read COFF symbol tables mustignore auxiliary symbol records whose interpretation is unknown. This allows thesymbol table format to be extended to add new auxiliary records, withoutbreaking existing tools.

5.4.1 SymbolName Representation

The ShortName field in a symbol tableconsists of 8 bytes that contain the name itself, if it is not more than 8 byteslong, or the ShortName field gives an offset into the string table. Todetermine whether the name itself or an offset is given, test the first 4 bytesfor equality to zero.

By convention, the names are treated aszero-terminated UTF-8 encoded strings.

Offset	Size	Field	Description
0	8	ShortName	An array of 8 bytes. This array is padded with nulls on the right if the name is less than 8 bytes long.
0	4	Zeroes	A field that is set to all zeros if the name is longer than 8 bytes.
4	4	Offset	An offset into the string table.

5.4.2Section Number Values

Normally, the Section Value field in asymbol table entry is a one-based index into the section table. However, thisfield is a signed integer and can take negative values. The following values,less than one, have special meanings.

Constant	Value	Description
IMAGE_SYM_UNDEFINED	0	The symbol record is not yet assigned a section. A value of zero indicates that a reference to an external symbol is defined elsewhere. A value of non-zero is a common symbol with a size that is specified by the value.
IMAGE_SYM_ABSOLUTE	-1	The symbol has an absolute (non-relocatable) value and is not an address.
IMAGE_SYM_DEBUG	-2	The symbol provides general type or debugging information but does not correspond to a section. Microsoft tools use this setting along with .file records (storage class FILE).

5.4.3 TypeRepresentation

The Type field of a symbol table entrycontains 2 bytes, where each byte represents type information. The LSB representsthe simple (base) data type, and the MSB represents the complex type, if any:

MSB	LSB
Complex type: none, pointer, function, array.	Base type: integer, floating-point, and so on.

 

The following values are defined forbase type, although Microsoft tools generally do not use this field and set theLSB to 0. Instead, Visual C++ debug information is used to indicate types.However, the possible COFF values are listed here for completeness.

Constant	Value	Description
IMAGE_SYM_TYPE_NULL	0	No type information or unknown base type. Microsoft tools use this setting
IMAGE_SYM_TYPE_VOID	1	No valid type; used with void pointers and functions
IMAGE_SYM_TYPE_CHAR	2	A character (signed byte)
IMAGE_SYM_TYPE_SHORT	3	A 2-byte signed integer
IMAGE_SYM_TYPE_INT	4	A natural integer type (normally 4 bytes in Windows)
IMAGE_SYM_TYPE_LONG	5	A 4-byte signed integer
IMAGE_SYM_TYPE_FLOAT	6	A 4-byte floating-point number
IMAGE_SYM_TYPE_DOUBLE	7	An 8-byte floating-point number
IMAGE_SYM_TYPE_STRUCT	8	A structure
IMAGE_SYM_TYPE_UNION	9	A union
IMAGE_SYM_TYPE_ENUM	10	An enumerated type
IMAGE_SYM_TYPE_MOE	11	A member of enumeration (a specific value)
IMAGE_SYM_TYPE_BYTE	12	A byte; unsigned 1-byte integer
IMAGE_SYM_TYPE_WORD	13	A word; unsigned 2-byte integer
IMAGE_SYM_TYPE_UINT	14	An unsigned integer of natural size (normally, 4 bytes)
IMAGE_SYM_TYPE_DWORD	15	An unsigned 4-byte integer

 

The most significant byte specifieswhether the symbol is a pointer to, function returning, or array of the basetype that is specified in the LSB. Microsoft tools use this field only toindicate whether the symbol is a function, so that the only two resultingvalues are 0x0 and 0x20 for the Type field. However, other tools can use thisfield to communicate more information.

It is very important to specify thefunction attribute correctly. This information is required for incrementallinking to work correctly. For some architectures, the information may berequired for other purposes.

Constant	Value	Description
IMAGE_SYM_DTYPE_NULL	0	No derived type; the symbol is a simple scalar variable.
IMAGE_SYM_DTYPE_POINTER	1	The symbol is a pointer to base type.
IMAGE_SYM_DTYPE_FUNCTION	2	The symbol is a function that returns a base type.
IMAGE_SYM_DTYPE_ARRAY	3	The symbol is an array of base type.

5.4.4Storage Class

The StorageClass field of the symbol table indicates what kind ofdefinition a symbol represents. The following table shows possible values. Notethat the StorageClass field is an unsigned 1-byte integer. The special value -1should therefore be taken to mean its unsigned equivalent, 0xFF.

Although the traditional COFF format usesmany storage-class values, Microsoft tools rely on Visual C++ debug format formost symbolic information and generally use only four storage-class values:EXTERNAL (2), STATIC (3), FUNCTION (101), and STATIC (103). Except in thesecond column heading below, “Value” should be taken to mean the Value field ofthe symbol record (whose interpretation depends on the number found as thestorage class).

Constant	Value	Description/interpretation of the Value field
IMAGE_SYM_CLASS_END_OF_FUNCTION	-1 (0xFF)	A special symbol that represents the end of function, for debugging purposes.
IMAGE_SYM_CLASS_NULL	0	No assigned storage class.
IMAGE_SYM_CLASS_AUTOMATIC	1	The automatic (stack) variable. The Value field specifies the stack frame offset.
IMAGE_SYM_CLASS_EXTERNAL	2	A value that Microsoft tools use for external symbols. The Value field indicates the size if the section number is IMAGE_SYM_UNDEFINED (0). If the section number is not zero, then the Value field specifies the offset within the section.
IMAGE_SYM_CLASS_STATIC	3	The offset of the symbol within the section. If the Value field is zero, then the symbol represents a section name.
IMAGE_SYM_CLASS_REGISTER	4	A register variable. The Value field specifies the register number.
IMAGE_SYM_CLASS_EXTERNAL_DEF	5	A symbol that is defined externally.
IMAGE_SYM_CLASS_LABEL	6	A code label that is defined within the module. The Value field specifies the offset of the symbol within the section.
IMAGE_SYM_CLASS_UNDEFINED_LABEL	7	A reference to a code label that is not defined.
IMAGE_SYM_CLASS_MEMBER_OF_STRUCT	8	The structure member. The Value field specifies the nth member.
IMAGE_SYM_CLASS_ARGUMENT	9	A formal argument (parameter) of a function. The Value field specifies the nth argument.
IMAGE_SYM_CLASS_STRUCT_TAG	10	The structure tag-name entry.
IMAGE_SYM_CLASS_MEMBER_OF_UNION	11	A union member. The Value field specifies the nth member.
IMAGE_SYM_CLASS_UNION_TAG	12	The Union tag-name entry.
IMAGE_SYM_CLASS_TYPE_DEFINITION	13	A Typedef entry.
IMAGE_SYM_CLASS_UNDEFINED_STATIC	14	A static data declaration.
IMAGE_SYM_CLASS_ENUM_TAG	15	An enumerated type tagname entry.
IMAGE_SYM_CLASS_MEMBER_OF_ENUM	16	A member of an enumeration. The Value field specifies the nth member.
IMAGE_SYM_CLASS_REGISTER_PARAM	17	A register parameter.
IMAGE_SYM_CLASS_BIT_FIELD	18	A bit-field reference. The Value field specifies the nth bit in the bit field.
IMAGE_SYM_CLASS_BLOCK	100	A .bb (beginning of block) or .eb (end of block) record. The Value field is the relocatable address of the code location.
IMAGE_SYM_CLASS_FUNCTION	101	A value that Microsoft tools use for symbol records that define the extent of a function: begin function (.bf), end function (.ef), and lines in function (.lf). For .lf records, the Value field gives the number of source lines in the function. For .ef records, the Value field gives the size of the function code.
IMAGE_SYM_CLASS_END_OF_STRUCT	102	An end-of-structure entry.
IMAGE_SYM_CLASS_FILE	103	A value that Microsoft tools, as well as traditional COFF format, use for the source-file symbol record. The symbol is followed by auxiliary records that name the file.
IMAGE_SYM_CLASS_SECTION	104	A definition of a section (Microsoft tools use STATIC storage class instead).
IMAGE_SYM_CLASS_WEAK_EXTERNAL	105	A weak external. For more information, see section 5.5.3, “Auxiliary Format 3: Weak Externals.”
IMAGE_SYM_CLASS_CLR_TOKEN	107	A CLR token symbol. The name is an ASCII string that consists of the hexadecimal value of the token. For more information, see section 5.5.7, “CLR Token Definition (Object Only).”

5.5Auxiliary Symbol Records

Auxiliary symbol table records alwaysfollow, and apply to, some standard symbol table record. An auxiliary recordcan have any format that the tools can recognize, but 18 bytes must beallocated for them so that symbol table is maintained as an array of regularsize. Currently, Microsoft tools recognize auxiliary formats for the followingkinds of records: function definitions, function begin and end symbols (.bfand.ef), weak externals, file names, and section definitions.

The traditional COFF design also includesauxiliary-record formats for arrays and structures. Microsoft tools do not usethese, but instead place that symbolic information in Visual C++ debug formatin the debug sections.

5.5.1Auxiliary Format 1: Function Definitions

A symbol table record marks the beginningof a function definition if it has all of the following: a storage class of EXTERNAL(2), a Type value that indicates it is a function (0x20), and a section number thatis greater than zero. Note that a symbol table record that has a section numberof UNDEFINED (0) does not define the function and does not have an auxiliaryrecord. Function-definition symbol records are followed by an auxiliary record inthe format described below:

Offset	Size	Field	Description
0	4	TagIndex	The symbol-table index of the corresponding .bf (begin function) symbol record.
4	4	TotalSize	The size of the executable code for the function itself. If the function is in its own section, the SizeOfRawData in the section header is greater or equal to this field, depending on alignment considerations.
8	4	PointerToLinenumber	The file offset of the first COFF line-number entry for the function, or zero if none exists. For more information, see section 5.3, “COFF Line Numbers (Deprecated).”
12	4	PointerToNextFunction	The symbol-table index of the record for the next function. If the function is the last in the symbol table, this field is set to zero.
16	2	Unused

5.5.2Auxiliary Format 2: .bf and .ef Symbols

For each function definition in the symboltable, three items describe the beginning, ending, and number of lines. Each ofthese symbols has storage class FUNCTION (101):

·      A symbol record named.bf (begin function). The Value fieldis unused.

·      A symbol record named.lf (lines in function). The Valuefield gives the number of lines in the function.

·      A symbol record named.ef (end of function). The Value fieldhas the same number as the Total Size field in the function-definition symbolrecord.

 

The .bf and.ef symbolrecords (but not .lf records) are followed by an auxiliary record withthe following format:

Offset	Size	Field	Description
0	4	Unused
4	2	Linenumber	The actual ordinal line number (1, 2, 3, and so on) within the source file, corresponding to the .bf or .ef record.
6	6	Unused
12	4	PointerToNextFunction (.bf only)	The symbol-table index of the next .bf symbol record. If the function is the last in the symbol table, this field is set to zero. It is not used for .ef records.
16	2	Unused

5.5.3Auxiliary Format 3: Weak Externals

“Weak externals” are a mechanism forobject files that allows flexibility at link time. A module can contain anunresolved external symbol (sym1), but it can also include an auxiliary record thatindicates that if sym1 is not present at link time, another external symbol(sym2) is used to resolve references instead.

If a definition of sym1 is linked, thenan external reference to the symbol is resolved normally. If a definition ofsym1 is not linked, then all references to the weak external for sym1 refer tosym2 instead. The external symbol, sym2, must always be linked; typically, itis defined in the module that contains the weak reference to sym1.

Weak externals are represented by a symboltable record with EXTERNAL storage class, UNDEF section number, and a value of zero.The weak-external symbol record is followed by an auxiliary record with thefollowing format:

Offset	Size	Field	Description
0	4	TagIndex	The symbol-table index of sym2, the symbol to be linked if sym1 is not found.
4	4	Characteristics	A value of IMAGE_WEAK_EXTERN_SEARCH_NOLIBRARY indicates that no library search for sym1 should be performed. A value of IMAGE_WEAK_EXTERN_SEARCH_LIBRARY indicates that a library search for sym1 should be performed. A value of IMAGE_WEAK_EXTERN_SEARCH_ALIAS indicates that sym1 is an alias for sym2.
8	10	Unused

 

Note that the Characteristics field isnot defined in WINNT.H; instead, the Total Size field is used.

5.5.4Auxiliary Format 4: Files

This format follows a symbol-tablerecord with storage class FILE (103). The symbol name itself should be.file,and the auxiliary record that follows it gives the name of a source-code file.

Offset	Size	Field	Description
0	18	File Name	An ANSI string that gives the name of the source file. This is padded with nulls if it is less than the maximum length.

5.5.5Auxiliary Format 5: Section Definitions

This format follows a symbol-tablerecord that defines a section. Such a record has a symbol name that is the nameof a section (such as .text or .drectve) and has storage classSTATIC (3). The auxiliary record provides information about the section towhich it refers. Thus, it duplicates some of the information in the sectionheader.

Offset	Size	Field	Description
0	4	Length	The size of section data; the same as SizeOfRawData in the section header.
4	2	NumberOfRelocations	The number of relocation entries for the section.
6	2	NumberOfLinenumbers	The number of line-number entries for the section.
8	4	CheckSum	The checksum for communal data. It is applicable if the IMAGE_SCN_LNK_COMDAT flag is set in the section header. For more information, see section 5.5.6, “COMDAT Sections (Object Only).”
12	2	Number	One-based index into the section table for the associated section. This is used when the COMDAT selection setting is 5.
14	1	Selection	The COMDAT selection number. This is applicable if the section is a COMDAT section.
15	3	Unused

5.5.6 COMDATSections (Object Only)

The Selection field of the section definitionauxiliary format is applicable if the section is a COMDAT section. A COMDATsection is a section that can be defined by more than one object file. (Theflag IMAGE_SCN_LNK_COMDAT is set in the Section Flags field of the sectionheader.) The Selection field determines the way in which the linker resolvesthe multiple definitions of COMDAT sections.

The first symbol that has the sectionvalue of the COMDAT section must be the section symbol. This symbol has thename of the section, the Value field equal to zero, the section number of theCOMDAT section in question, the Type field equal to IMAGE_SYM_TYPE_NULL, the Classfield equal to IMAGE_SYM_CLASS_STATIC, and one auxiliary record. The secondsymbol is called “the COMDAT symbol” and is used by the linker in conjunctionwith the Selection field.

The values for the Selection field areshown below.

Constant	Value	Description
IMAGE_COMDAT_SELECT_NODUPLICATES	1	If this symbol is already defined, the linker issues a "multiply defined symbol" error.
IMAGE_COMDAT_SELECT_ANY	2	Any section that defines the same COMDAT symbol can be linked; the rest are removed.
IMAGE_COMDAT_SELECT_SAME_SIZE	3	The linker chooses an arbitrary section among the definitions for this symbol. If all definitions are not the same size, a "multiply defined symbol" error is issued.
IMAGE_COMDAT_SELECT_EXACT_MATCH	4	The linker chooses an arbitrary section among the definitions for this symbol. If all definitions do not match exactly, a "multiply defined symbol" error is issued.
IMAGE_COMDAT_SELECT_ASSOCIATIVE	5	The section is linked if a certain other COMDAT section is linked. This other section is indicated by the Number field of the auxiliary symbol record for the section definition. This setting is useful for definitions that have components in multiple sections (for example, code in one and data in another), but where all must be linked or discarded as a set. The other section with which this section is associated must be a COMDAT section; it cannot be another associative COMDAT section (that is, the other section cannot have IMAGE_COMDAT_SELECT_ASSOCIATIVE set).
IMAGE_COMDAT_SELECT_LARGEST	6	The linker chooses the largest definition from among all of the definitions for this symbol. If multiple definitions have this size, the choice between them is arbitrary.

5.5.7 CLR TokenDefinition (Object Only)

This auxiliary symbol generally followsthe IMAGE_SYM_CLASS_CLR_TOKEN. It is used to associate a token with the COFFsymbol table’s namespace.

Offset	Size	Field	Description
0	1	bAuxType	Must be IMAGE_AUX_SYMBOL_TYPE_TOKEN_DEF (1).
1	1	bReserved	Reserved, must be zero.
2	4	SymbolTableIndex	The symbol index of the COFF symbol to which this CLR token definition refers.
6	12		Reserved, must be zero.

5.6 COFFString Table

Immediately following the COFF symboltable is the COFF string table. The position of this table is found by takingthe symbol table address in the COFF header and adding the number of symbolsmultiplied by the size of a symbol.

At the beginning of the COFF string tableare 4 bytes that contain the total size (in bytes) of the rest of the stringtable. This size includes the size field itself, so that the value in thislocation would be 4 if no strings were present.

Following the size are null-terminatedstrings that are pointed to by symbols in the COFF symbol table.

5.7 TheAttribute Certificate Table (Image Only)

Attribute certificates can be associatedwith an image by adding an attribute certificate table. The attributecertificate table is composed of a set of contiguous, quadword-alignedattribute certificate entries. Zero padding is inserted between the originalend of the file and the beginning of the attribute certificate table to achievethis alignment. Each attribute certificate entry contains the following fields.

Offset	Size	Field	Description
0	4	dwLength	Specifies the length of the attribute certificate entry.
4	2	wRevision	Contains the certificate version number. For details, see the following text.
6	2	wCertificateType	Specifies the type of content in bCertificate. For details, see the following text.
8	See the following	bCertificate	Contains a certificate, such as an Authenticode signature. For details, see the following text.

 

The virtual address value from theCertificate Table entry in the Optional Header Data Directory is a file offsetto the first attribute certificate entry. Subsequent entries are accessed byadvancing that entry’s dwLength bytes, rounded up to an 8‑byte multiple, fromthe start of the current attribute certificate entry. This continues until the sumof the rounded dwLength values equals the Size value from the CertificatesTable entry in the Optional Header Data Directory. If the sum of the roundeddwLength values does not equal the Size value, then either the attributecertificate table or the Size field is corrupted.

For example, if the Optional Header DataDirectory’s Certificate Table Entry contains:

virtual address = 0x5000

size = 0x1000

 

The first certificate starts at offset0x5000 from the start of the file on disk. To advance through all the attributecertificate entries:

1.   Addthe first attribute certificate's dwLength value to the starting offset.

2.   Roundthe value from step 1 up to the nearest 8-byte multiple to find the offset ofthe second attribute certificate entry.

3.   Addthe offset value from step 2 to the second attribute certificate entry'sdwLength value and round up to the nearest 8-byte multiple to determine theoffset of the third attribute certificate entry.

4.   Repeatstep 3 for each successive certificate until the calculated offset equals0x6000 (0x5000 start + 0x1000 total size), which indicates that you’ve walkedthe entire table.

 

Alternatively, you can enumerate thecertificate entries by calling the Win32®ImageEnumerateCertificatesfunction in a loop. For a link to the function's reference page, see“References.”

Attribute certificate table entries cancontain any certificate type, as long as the entry has the correct dwLengthvalue, a unique wRevision value, and a unique wCertificateType value. The mostcommon type of certificate table entry is a WIN_CERTIFICATE structure, which isdocumented in Wintrust.h and discussed in the remainder of this section.

The options for the WIN_CERTIFICATEwRevision member include (but are notlimited to) the following.

Value	Name	Notes
0x0100	WIN_CERT_REVISION_1_0	Version 1, legacy version of the Win_Certificate structure. It is supported only for purposes of verifying legacy Authenticode signatures
0x0200	WIN_CERT_REVISION_2_0	Version 2 is the current version of the Win_Certificate structure.

 

The options for the WIN_CERTIFICATEwCertificateType member include (butare not limited to) the items in the following table. Note that some values arenot currently supported.

Value	Name	Notes
0x0001	WIN_CERT_TYPE_X509	bCertificate contains an X.509 Certificate Not Supported
0x0002	WIN_CERT_TYPE_PKCS_SIGNED_DATA	bCertificate contains a PKCS#7 SignedData structure
0x0003	WIN_CERT_TYPE_RESERVED_1	Reserved
0x0004	WIN_CERT_TYPE_TS_STACK_SIGNED	Terminal Server Protocol Stack Certificate signing Not Supported

 

The WIN_CERTIFICATE structure'sbCertificate member contains avariable-length byte array with the content type specified bywCertificateType. The type supported byAuthenticode is WIN_CERT_TYPE_PKCS_SIGNED_DATA, a PKCS#7SignedData structure. For details on the Authenticode digitalsignature format, see “Windows Authenticode Portable Executable SignatureFormat.”

If the bCertificate content does not end on a quadword boundary, theattribute certificate entry is padded with zeros, from the end ofbCertificate to the next quadwordboundary.

The dwLengthvalue is the length of the finalized WIN_CERTIFICATE structure and is computedas:

dwLength= offsetof(WIN_CERTIFICATE, bCertificate) + (size of the variable-length binaryarray contained within bCertificate)

This length should include the size ofany padding that is used to satisfy the requirement that each WIN_CERTIFICATEstructure is quadword aligned:

dwLength+= (8 – (dwLength & 7)) & 7;

The CertificateTable size—specified in theCertificatesTable entry in the Optional HeaderData Directory (section 3.4.3)—includes the padding.

 

For more information on using theImageHlp API to enumerate, add, and remove certificates from PE Files, see“ImageHlp Functions.”

5.7.1 Certificate Data

As stated in the preceding section, thecertificates in the attribute certificate table can contain any certificatetype. Certificates that ensure a PE file's integrity may include a PE imagehash.

A PE image hash (or file hash) is similarto a file checksum in that the hash algorithm produces a message digest that isrelated to the integrity of a file. However, a checksum is produced by a simplealgorithm and is used primarily to detect whether a block of memory on disk hasgone bad and the values stored there have become corrupted. A file hash issimilar to a checksum in that it also detects file corruption. However, unlikemost checksum algorithms, it is very difficult to modify a file withoutchanging the file hash from its original unmodified value. A file hash can thusbe used to detect intentional and even subtle modifications to a file, such asthose introduced by viruses, hackers, or Trojan horse programs.

When included in a certificate, the imagedigest must exclude certain fields in the PE Image, such as the Checksum andCertificate Table entry in Optional Header Data Directories. This is becausethe act of adding a Certificate changes these fields and would cause adifferent hash value to be calculated.

The Win32 ImageGetDigestStream function provides a data stream from a targetPE file with which to hash functions. This data stream remains consistent whencertificates are added to or removed from a PE file. Based on the parametersthat are passed toImageGetDigestStream,other data from the PE image can be omitted from the hash computation. For alink to the function's reference page, see ”References.”

5.8Delay-Load Import Tables (Image Only)

These tables were added to the image tosupport a uniform mechanism for applications to delay the loading of a DLLuntil the first call into that DLL. The layout of the tables matches that ofthe traditional import tables that are described in section 6.4, "The .idata Section." Only a few details are discussed here.

5.8.1 TheDelay-Load Directory Table

The delay-load directory table is thecounterpart to the import directory table. It can be retrieved through theDelay Import Descriptor entry in the optional header data directories list(offset 200). The table is arranged as follows:

Offset	Size	Field	Description
0	4	Attributes	Must be zero.
4	4	Name	The RVA of the name of the DLL to be loaded. The name resides in the read-only data section of the image.
8	4	Module Handle	The RVA of the module handle (in the data section of the image) of the DLL to be delay-loaded. It is used for storage by the routine that is supplied to manage delay-loading.
12	4	Delay Import Address Table	The RVA of the delay-load import address table. For more information, see section 5.8.5, "Delay Import Address Table (IAT)."
16	4	Delay Import Name Table	The RVA of the delay-load name table, which contains the names of the imports that might need to be loaded. This matches the layout of the import name table. For more information, see section 6.4.3, "Hint/Name Table."
20	4	Bound Delay Import Table	The RVA of the bound delay-load address table, if it exists.
24	4	Unload Delay Import Table	The RVA of the unload delay-load address table, if it exists. This is an exact copy of the delay import address table. If the caller unloads the DLL, this table should be copied back over the delay import address table so that subsequent calls to the DLL continue to use the thunking mechanism correctly.
28	4	Time Stamp	The timestamp of the DLL to which this image has been bound.

 

The tables that are referenced in this datastructure are organized and sorted just as their counterparts are fortraditional imports. For details, see section 6.4, "The .idataSection."

5.8.2Attributes

As yet, no attribute flags are defined. Thelinker sets this field to zero in the image. This field can be used to extendthe record by indicating the presence of new fields, or it can be used toindicate behaviors to the delay or unload helper functions.

5.8.3 Name

The name of the DLL to be delay-loadedresides in the read-only data section of the image. It is referenced through theszName field.

5.8.4 ModuleHandle

The handle of the DLL to be delay-loadedis in the data section of the image. The phmod field points to the handle. Thesupplied delay-load helper uses this location to store the handle to the loadedDLL.

5.8.5 DelayImport Address Table

The delay import address table (IAT) isreferenced by the delay import descriptor through the pIAT field. Thedelay-load helper updates these pointers with the real entry points so that thethunks are no longer in the calling loop. The function pointers are accessed byusing the expression pINT->u1.Function.

5.8.6 DelayImport Name Table

The delay import name table (INT) containsthe names of the imports that might require loading. They are ordered in thesame fashion as the function pointers in the IAT. They consist of the samestructures as the standard INT and are accessed by using the expression pINT->u1.AddressOfData->Name[0].

5.8.7 DelayBound Import Address Table and Time Stamp

The delay bound import address table (BIAT)is an optional table of IMAGE_THUNK_DATA items that is used along with thetimestamp field of the delay-load directory table by a post-process bindingphase.

5.8.8 DelayUnload Import Address Table

The delay unload import address table (UIAT)is an optional table of IMAGE_THUNK_DATA items that the unload code uses tohandle an explicit unload request. It consists of initialized data in the read-onlysection that is an exact copy of the original IAT that referred the code to thedelay-load thunks. On the unload request, the library can be freed, the *phmodcleared, and the UIAT written over the IAT to restore everything to its preloadstate.

6 Special Sections

Typical COFF sections contain code ordata that linkers and Microsoft Win32® loaders process without specialknowledge of the section contents. The contents are relevant only to theapplication that is being linked or executed.

However, some COFF sections have specialmeanings when found in object files or image files. Tools and loaders recognizethese sections because they have special flags set in the section header,because special locations in the image optional header point to them, orbecause the section name itself indicates a special function of the section. (Evenif the section name itself does not indicate a special function of the section,the section name is dictated by convention, so the authors of this specificationcan refer to a section name in all cases.)

The reserved sections and theirattributes are described in the table below, followed by detailed descriptionsfor the section types that are persisted into executables and the section typesthat contain metadata for extensions.

Section Name	Content	Characteristics
.bss	Uninitialized data (free format)	IMAGE_SCN_CNT_UNINITIALIZED_DATA | IMAGE_SCN_MEM_READ |                 IMAGE_SCN_MEM_WRITE
.cormeta	CLR metadata that indicates that the object file contains managed code	IMAGE_SCN_LNK_INFO
.data	Initialized data (free format)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |          IMAGE_SCN_MEM_WRITE
.debug$F	Generated FPO debug information (object only, x86 architecture only, and now obsolete)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |          IMAGE_SCN_MEM_DISCARDABLE
.debug$P	Precompiled debug types (object only)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |          IMAGE_SCN_MEM_DISCARDABLE
.debug$S	Debug symbols (object only)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |          IMAGE_SCN_MEM_DISCARDABLE
.debug$T	Debug types (object only)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |          IMAGE_SCN_MEM_DISCARDABLE
.drective	Linker options	IMAGE_SCN_LNK_INFO
.edata	Export tables	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ
.idata	Import tables	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ | IMAGE_SCN_MEM_WRITE
.idlsym	Includes registered SEH (image only) to support IDL attributes. For information, see "IDL Attributes" in "References" at the end of this specification.	IMAGE_SCN_LNK_INFO
.pdata	Exception information	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ
.rdata	Read-only initialized data	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ
.reloc	Image relocations	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |                IMAGE_SCN_MEM_DISCARDABLE
.rsrc	Resource directory	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ
.sbss	GP-relative uninitialized data (free format)	IMAGE_SCN_CNT_UNINITIALIZED_DATA | IMAGE_SCN_MEM_READ |                 IMAGE_SCN_MEM_WRITE |                IMAGE _SCN_GPREL The IMAGE_SCN_GPREL flag should be set for IA64 architectures only; this flag is not valid for other architectures. The IMAGE_SCN_GPREL flag is for object files only; when this section type appears in an image file, the IMAGE_SCN_GPREL flag must not be set.
.sdata	GP-relative initialized data (free format)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |                IMAGE_SCN_MEM_WRITE |                IMAGE _SCN_GPREL The IMAGE_SCN_GPREL flag should be set for IA64 architectures only; this flag is not valid for other architectures. The IMAGE_SCN_GPREL flag is for object files only; when this section type appears in an image file, the IMAGE_SCN_GPREL flag must not be set.
.srdata	GP-relative read-only data (free format)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |                IMAGE _SCN_GPREL The IMAGE_SCN_GPREL flag should be set for IA64 architectures only; this flag is not valid for other architectures. The IMAGE_SCN_GPREL flag is for object files only; when this section type appears in an image file, the IMAGE_SCN_GPREL flag must not be set.
.sxdata	Registered exception handler data (free format and x86/object only)	IMAGE_SCN_LNK_INFO Contains the symbol index of each of the exception handlers being referred to by the code in that object file. The symbol can be for an UNDEF symbol or one that is defined in that module.
.text	Executable code (free format)	IMAGE_SCN_CNT_CODE | IMAGE_SCN_MEM_EXECUTE |                 IIMAGE_SCN_MEM_READ
.tls	Thread-local storage (object  only)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |                IMAGE_SCN_MEM_WRITE
.tls$	Thread-local storage (object only)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |                IMAGE_SCN_MEM_WRITE
.vsdata	GP-relative initialized data (free format and for ARM, SH4, and Thumb architectures only)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ |                IMAGE_SCN_MEM_WRITE
.xdata	Exception information (free format)	IMAGE_SCN_CNT_INITIALIZED_DATA | IMAGE_SCN_MEM_READ

 

Some of the sections listed here aremarked “object only” or “image only” to indicate that their special semanticsare relevant only for object files or image files, respectively. A section thatis marked “image only” might still appear in an object file as a way of gettinginto the image file, but the section has no special meaning to the linker, onlyto the image file loader.

6.1 The.debug Section

The .debug section is used inobject files to contain compiler-generated debug information and in image filesto contain all of the debug information that is generated. This sectiondescribes the packaging of debug information in object and image files.

The next section describes the format ofthe debug directory, which can be anywhere in the image. Subsequent sectionsdescribe the “groups” in object files that contain debug information.

The default for the linker is that debuginformation is not mapped into the address space of the image. A .debugsection exists only when debug information is mapped in the address space.

6.1.1 DebugDirectory (Image Only)

Image files contain an optional debugdirectory that indicates what form of debug information is present and where itis. This directory consists of an array of debug directory entries whoselocation and size are indicated in the image optional header.

The debug directory can be in adiscardable.debug section (if one exists), or it can be included in anyother section in the image file, or not be in a section at all.

Each debug directory entry identifies thelocation and size of a block of debug information. The specified RVA can be zeroif the debug information is not covered by a section header (that is, itresides in the image file and is not mapped into the run-time address space).If it is mapped, the RVA is its address.

A debug directory entry has thefollowing format:

Offset	Size	Field	Description
0	4	Characteristics	Reserved, must be zero.
4	4	TimeDateStamp	The time and date that the debug data was created.
8	2	MajorVersion	The major version number of the debug data format.
10	2	MinorVersion	The minor version number of the debug data format.
12	4	Type	The format of debugging information. This field enables support of multiple debuggers. For more information, see section 6.1.2, “Debug Type.”
16	4	SizeOfData	The size of the debug data (not including the debug directory itself).
20	4	AddressOfRawData	The address of the debug data when loaded, relative to the image base.
24	4	PointerToRawData	The file pointer to the debug data.

6.1.2 DebugType

The following values are defined for theType field of the debug directory entry:

Constant	Value	Description
IMAGE_DEBUG_TYPE_UNKNOWN	0	An unknown value that is ignored by all tools.
IMAGE_DEBUG_TYPE_COFF	1	The COFF debug information (line numbers, symbol table, and string table). This type of debug information is also pointed to by fields in the file headers.
IMAGE_DEBUG_TYPE_CODEVIEW	2	The Visual C++ debug information.
IMAGE_DEBUG_TYPE_FPO	3	The frame pointer omission (FPO) information. This information tells the debugger how to interpret nonstandard stack frames, which use the EBP register for a purpose other than as a frame pointer.
IMAGE_DEBUG_TYPE_MISC	4	The location of DBG file.
IMAGE_DEBUG_TYPE_EXCEPTION	5	A copy of .pdata section.
IMAGE_DEBUG_TYPE_FIXUP	6	Reserved.
IMAGE_DEBUG_TYPE_OMAP_TO_SRC	7	The mapping from an RVA in image to an RVA in source image.
IMAGE_DEBUG_TYPE_OMAP_FROM_SRC	8	The mapping from an RVA in source image to an RVA in image.
IMAGE_DEBUG_TYPE_BORLAND	9	Reserved for Borland.
IMAGE_DEBUG_TYPE_RESERVED10	10	Reserved.
IMAGE_DEBUG_TYPE_CLSID	11	Reserved.
IMAGE_DEBUG_TYPE_REPRO	16	PE determinism or reproducibility.

 

If the Type field is set toIMAGE_DEBUG_TYPE_FPO, the debug raw data is an array in which each memberdescribes the stack frame of a function. Not every function in the image file musthave FPO information defined for it, even though debug type is FPO. Thosefunctions that do not have FPO information are assumed to have normal stackframes. The format for FPO information is as follows:

#define FRAME_FPO   0

#define FRAME_TRAP  1

#define FRAME_TSS   2

 

typedef struct _FPO_DATA {

    DWORD       ulOffStart;            // offset 1^st byte offunction code

    DWORD       cbProcSize;            // # bytes in function

    DWORD       cdwLocals;             // # bytes in locals/4

    WORD        cdwParams;             // # bytes in params/4

 

    WORD        cbProlog : 8;          // # bytes in prolog

    WORD        cbRegs  : 3;          // # regs saved

    WORD        fHasSEH : 1;          // TRUE if SEH infunc

    WORD        fUseBP  : 1;          // TRUE if EBP hasbeen allocated

    WORD        reserved : 1;          // reserved for future use

    WORD        cbFrame : 2;          // frame type

} FPO_DATA;

 

The presence of an entry of type IMAGE_DEBUG_TYPE_REPROindicates the PE file is built in a way to achieve determinism orreproducibility. If the input does not change, the output PE file is guaranteedto be bit-for-bit identical no matter when or where the PE is produced. Variousdate/time stamp fields in the PE file are filled with part or all the bits froma calculated hash value that uses PE file content as input, and therefore nolonger represent the actual date and time when a PE file or related specificdata within the PE is produced. The raw data of this debug entry may be empty,or may contain a calculated hash value preceded by a four-byte value thatrepresents the hash value length.

6.1.3.debug$F (Object Only)

The data in this section has been supersededin Visual C++ version 7.0 and later by a more extensive set of data that isemitted into a.debug$S subsection.

Object files can contain.debug$F sectionswhose contents are one or more FPO_DATA records (frame pointer omission information).See “IMAGE_DEBUG_TYPE_FPO” in section 6.1.2, "Debug Type."

The linker recognizes these.debug$Frecords. If debug information is being generated, the linker sorts the FPO_DATArecords by procedure RVA and generates a debug directory entry for them.

The compiler should not generate FPOrecords for procedures that have a standard frame format.

6.1.4.debug$S (Object Only)

This section contains Visual C++ debuginformation (symbolic information).

6.1.5.debug$P (Object Only)

This section contains Visual C++ debuginformation (precompiled information). These are shared types among all of theobjects that were compiled by using the precompiled header that was generatedwith this object.

6.1.6.debug$T (Object Only)

This section contains Visual C++ debuginformation (type information).

6.1.7 LinkerSupport for Microsoft Debug Information

To support debug information, thelinker:

·      Gathers all relevant debug datafrom the.debug$F, debug$S, .debug$P, and.debug$T sections.

·      Processes that data along withthe linker-generated debugging information into the PDB file, and creates adebug directory entry to refer to it.

6.2The.drectve Section (Object Only)

A section is a directive section if ithas the IMAGE_SCN_LNK_INFO flag set in the section header and has the .drectve section name. The linker removes a.drectvesection after processing the information, so the section does not appear in theimage file that is being linked.

A .drectve section consists of astring of text that can be encoded as ANSI or UTF‑8. If the UTF‑8 byte ordermarker (BOM, a three-byte prefix that consists of 0xEF, 0xBB, and 0xBF) is notpresent, the directive string is interpreted as ANSI. The directive string is aseries of linker options that are separated by spaces. Each option contains a hyphen,the option name, and any appropriate attribute. If an option contains spaces,the option must be enclosed in quotes. The .drectve section must nothave relocations or line numbers.

6.3 The.edata Section (Image Only)

The export data section, named.edata,contains information about symbols that other images can access through dynamiclinking. Exported symbols are generally found in DLLs, but DLLs can also importsymbols.

An overview of the general structure ofthe export section is described below. The tables described are usually contiguousin the file in the order shown (though this is not required). Only the export directorytable and export address table are required to export symbols as ordinals. (Anordinal is an export that is accessed directly by its export address tableindex.) The name pointer table, ordinal table, and export name table all existto support use of export names.

Table Name	Description
Export directory table	A table with just one row (unlike the debug directory). This table indicates the locations and sizes of the other export tables.
Export address table	An array of RVAs of exported symbols. These are the actual addresses of the exported functions and data within the executable code and data sections. Other image files can import a symbol by using an index to this table (an ordinal) or, optionally, by using the public name that corresponds to the ordinal if a public name is defined.
Name pointer table	An array of pointers to the public export names, sorted in ascending order.
Ordinal table	An array of the ordinals that correspond to members of the name pointer table. The correspondence is by position; therefore, the name pointer table and the ordinal table must have the same number of members. Each ordinal is an index into the export address table.
Export name table	A series of null-terminated ASCII strings. Members of the name pointer table point into this area. These names are the public names through which the symbols are imported and exported; they are not necessarily the same as the private names that are used within the image file.

 

When another image file imports a symbol by name, the Win32 loadersearches the name pointer table for a matching string. If a matching string isfound, the associated ordinal is identified by looking up the correspondingmember in the ordinal table (that is, the member of the ordinal table with thesame index as the string pointer found in the name pointer table). Theresulting ordinal is an index into the export address table, which gives theactual location of the desired symbol. Every export symbol can be accessed byan ordinal.

When another image file imports a symbolby ordinal, it is unnecessary to search the name pointer table for a matchingstring. Direct use of an ordinal is therefore more efficient. However, anexport name is easier to remember and does not require the user to know thetable index for the symbol.

6.3.1 ExportDirectory Table

The export symbol information beginswith the export directory table, which describes the remainder of the export symbolinformation. The export directory table contains address information that isused to resolve imports to the entry points within this image.

Offset	Size	Field	Description
0	4	Export Flags	Reserved, must be 0.
4	4	Time/Date Stamp	The time and date that the export data was created.
8	2	Major Version	The major version number. The major and minor version numbers can be set by the user.
10	2	Minor Version	The minor version number.
12	4	Name RVA	The address of the ASCII string that contains the name of the DLL. This address is relative to the image base.
16	4	Ordinal Base	The starting ordinal number for exports in this image. This field specifies the starting ordinal number for the export address table. It is usually set to 1.
20	4	Address Table Entries	The number of entries in the export address table.
24	4	Number of Name Pointers	The number of entries in the name pointer table. This is also the number of entries in the ordinal table.
28	4	Export Address Table RVA	The address of the export address table, relative to the image base.
32	4	Name Pointer RVA	The address of the export name pointer table, relative to the image base. The table size is given by the Number of Name Pointers field.
36	4	Ordinal Table RVA	The address of the ordinal table, relative to the image base.

6.3.2 ExportAddress Table

The export address table contains theaddress of exported entry points and exported data and absolutes. An ordinalnumber is used as an index into the export address table.

Each entry in the export address tableis a field that uses one of two formats in the following table. If the addressspecified isnot within the exportsection (as defined by the address and length that are indicated in the optionalheader), the field is an export RVA, which is an actual address in code ordata. Otherwise, the field is a forwarder RVA, which names a symbol in anotherDLL.

Offset	Size	Field	Description
0	4	Export RVA	The address of the exported symbol when loaded into memory, relative to the image base. For example, the address of an exported function.
0	4	Forwarder RVA	The pointer to a null-terminated ASCII string in the export section. This string must be within the range that is given by the export table data directory entry. See section 3.4.3, "Optional Header Data Directories (Image Only)." This string gives the DLL name and the name of the export (for example, “MYDLL.expfunc”) or the DLL name and the ordinal number of the export (for example, “MYDLL.#27”).

 

A forwarder RVA exports a definition fromsome other image, making it appear as if it were being exported by the currentimage. Thus, the symbol is simultaneously imported and exported.

For example, in Kernel32.dll in Windows XP,the export named “HeapAlloc” is forwarded to the string “NTDLL.RtlAllocateHeap.”This allows applications to use the Windows XP–specific module Ntdll.dllwithout actually containing import references to it. The application’s importtable refers only to Kernel32.dll. Therefore, the application is not specificto Windows XP and can run on any Win32 system.

6.3.3 ExportName Pointer Table

The export name pointer table is an arrayof addresses (RVAs) into the export name table. The pointers are 32 bits eachand are relative to the image base. The pointers are ordered lexically to allowbinary searches.

An export name is defined only if the exportname pointer table contains a pointer to it.

6.3.4 ExportOrdinal Table

The export ordinal table is an array of16-bit indexes into the export address table. The ordinals are biased by theOrdinal Base field of the export directory table. In other words, the ordinal basemust be subtracted from the ordinals to obtain true indexes into the export addresstable.

The export name pointer table and the exportordinal table form two parallel arrays that are separated to allow naturalfield alignment. These two tables, in effect, operate as one table, in whichthe Export Name Pointer column points to a public (exported) name and theExport Ordinal column gives the corresponding ordinal for that public name. Amember of the export name pointer table and a member of the export ordinal tableare associated by having the same position (index) in their respective arrays.

Thus, when the export name pointer tableis searched and a matching string is found at positioni, the algorithm for finding the symbol’s address is:

i = Search_ExportNamePointerTable(ExportName);

ordinal = ExportOrdinalTable [i];

SymbolRVA = ExportAddressTable [ordinal- OrdinalBase];

6.3.5 ExportName Table

The export name table contains the actualstring data that was pointed to by the export name pointer table. The stringsin this table are public names that other images can use to import the symbols.These public export names are not necessarily the same as the private symbolnames that the symbols have in their own image file and source code, althoughthey can be.

Every exported symbol has an ordinalvalue, which is just the index into the export address table (plus the OrdinalBase value). Use of export names, however, is optional. Some, all, or none ofthe exported symbols can have export names. For exported symbols that do haveexport names, corresponding entries in the export name pointer table and exportordinal table work together to associate each name with an ordinal.

The structure of the export name table isa series of null-terminated ASCII strings of variable length.

6.4 The .idata Section

All image files that import symbols,including virtually all executable (EXE) files, have an.idata section.A typical file layout for the import information follows:

Directory Table

Null Directory Entry

 

DLL1 Import Lookup Table

Null

 

DLL2 Import Lookup Table

Null

 

DLL3 Import Lookup Table

Null

 

Hint-Name Table

Figure 3. Typical Import Section Layout

6.4.1 ImportDirectory Table

The import information begins with the importdirectory table, which describes the remainder of the import information. The importdirectory table contains address information that is used to resolve fixupreferences to the entry points within a DLL image. The import directory tableconsists of an array of import directory entries, one entry for each DLL towhich the image refers. The last directory entry is empty (filled with nullvalues), which indicates the end of the directory table.

Each import directory entry has thefollowing format:

Offset	Size	Field	Description
0	4	Import Lookup Table RVA (Characteristics)	The RVA of the import lookup table. This table contains a name or ordinal for each import. (The name “Characteristics” is used in Winnt.h, but no longer describes this field.)
4	4	Time/Date Stamp	The stamp that is set to zero until the image is bound. After the image is bound, this field is set to the time/data stamp of the DLL.
8	4	Forwarder Chain	The index of the first forwarder reference.
12	4	Name RVA	The address of an ASCII string that contains the name of the DLL. This address is relative to the image base.
16	4	Import Address Table RVA (Thunk Table)	The RVA of the import address table. The contents of this table are identical to the contents of the import lookup table until the image is bound.

6.4.2 ImportLookup Table

An import lookup table is an array of32-bit numbers for PE32 or an array of 64-bit numbers for PE32+. Each entryuses the bit-field format that is described in the following table. In thisformat, bit 31 is the most significant bit for PE32 and bit 63 is the mostsignificant bit for PE32+. The collection of these entries describes allimports from a given DLL. The last entry is set to zero (NULL) to indicate the endof the table.

Bit(s)	Size	Bit field	Description
31/63	1	Ordinal/Name Flag	If this bit is set, import by ordinal. Otherwise, import by name. Bit is masked as 0x80000000 for PE32, 0x8000000000000000 for PE32+.
15-0	16	Ordinal Number	A 16-bit ordinal number. This field is used only if the Ordinal/Name Flag bit field is 1 (import by ordinal). Bits 30-15 or 62-15 must be 0.
30–0	31	Hint/Name Table RVA	A 31-bit RVA of a hint/name table entry. This field is used only if the Ordinal/Name Flag bit field is 0 (import by name). For PE32+ bits 62-31 must be zero.

 

6.4.3 Hint/Name Table

One hint/name table suffices for theentire import section. Each entry in the hint/name table has the followingformat:

Offset	Size	Field	Description
0	2	Hint	An index into the export name pointer table. A match is attempted first with this value. If it fails, a binary search is performed on the DLL’s export name pointer table.
2	variable	Name	An ASCII string that contains the name to import. This is the string that must be matched to the public name in the DLL. This string is case sensitive and terminated by a null byte.
*	0 or 1	Pad	A trailing zero-pad byte that appears after the trailing null byte, if necessary, to align the next entry on an even boundary.

6.4.4 Import Address Table

The structure and content of the import addresstable are identical to those of the import lookup table, until the file isbound. During binding, the entries in the import address table are overwrittenwith the 32-bit (for PE32) or 64-bit (for PE32+) addresses of the symbols thatare being imported. These addresses are the actual memory addresses of thesymbols, although technically they are still called “virtual addresses.” The loadertypically processes the binding.

6.5 The.pdata Section

The .pdatasection contains an array of function table entries that are used for exceptionhandling. It is pointed to by the exception table entry in the image datadirectory. The entries must be sorted according to the function addresses (thefirst field in each structure) before being emitted into the final image. Thetarget platform determines which of the three function table entry format variationsdescribed below is used.

For 32-bit MIPS images, function tableentries have the following format:

Offset	Size	Field	Description
0	4	Begin Address	The VA of the corresponding function.
4	4	End Address	The VA of the end of the function.
8	4	Exception Handler	The pointer to the exception handler to be executed.
12	4	Handler Data	The pointer to additional information to be passed to the handler.
16	4	Prolog End Address	The VA of the end of the function’s prolog.

 

For the ARM, PowerPC, SH3 and SH4Windows CE platforms, function table entries have the following format:

Offset	Size	Field	Description
0	4	Begin Address	The VA of the corresponding function.
4	8 bits	Prolog Length	The number of instructions in the function’s prolog.
4	22 bits	Function Length	The number of instructions in the function.
4	1 bit	32-bit Flag	If set, the function consists of 32-bit instructions. If clear, the function consists of 16-bit instructions.
4	1 bit	Exception Flag	If set, an exception handler exists for the function. Otherwise, no exception handler exists.

 

For x64 and Itanium platforms, functiontable entries have the following format:

Offset	Size	Field	Description
0	4	Begin Address	The RVA of the corresponding function.
4	4	End Address	The RVA of the end of the function.
8	4	Unwind Information	The RVA of the unwind information.

6.6 The.reloc Section (Image Only)

The base relocation table containsentries for all base relocations in the image. The Base Relocation Table field inthe optional header data directories gives the number of bytes in the baserelocation table. For more information, see section 3.4.3, "OptionalHeader Data Directories (Image Only)." The base relocation table is dividedinto blocks. Each block represents the base relocations for a 4K page. Eachblock must start on a 32-bit boundary.

The loader is not required to process baserelocations that are resolved by the linker, unless the load image cannot beloaded at the image base that is specified in the PE header.

6.6.1 BaseRelocation Block

Each base relocation block starts withthe following structure:

Offset	Size	Field	Description
0	4	Page RVA	The image base plus the page RVA is added to each offset to create the VA where the base relocation must be applied.
4	4	Block Size	The total number of bytes in the base relocation block, including the Page RVA and Block Size fields and the Type/Offset fields that follow.

 

The Block Size field is then followed byany number of Type or Offset field entries. Each entry is a WORD (2 bytes) andhas the following structure:

Offset	Size	Field	Description
0	4 bits	Type	Stored in the high 4 bits of the WORD, a value that indicates the type of base relocation to be applied. For more information, see section 6.6.2, “Base Relocation Types.”
0	12 bits	Offset	Stored in the remaining 12 bits of the WORD, an offset from the starting address that was specified in the Page RVA field for the block. This offset specifies where the base relocation is to be applied.

 

To apply a base relocation, thedifference is calculated between the preferred base address and the base wherethe image is actually loaded. If the image is loaded at its preferred base, thedifference is zero and thus the base relocations do not have to be applied.

6.6.2 BaseRelocation Types

Constant	Value	Description
IMAGE_REL_BASED_ABSOLUTE	0	The base relocation is skipped. This type can be used to pad a block.
IMAGE_REL_BASED_HIGH	1	The base relocation adds the high 16 bits of the difference to the 16-bit field at offset. The 16-bit field represents the high value of a 32-bit word.
IMAGE_REL_BASED_LOW	2	The base relocation adds the low 16 bits of the difference to the 16-bit field at offset. The 16-bit field represents the low half of a 32-bit word.
IMAGE_REL_BASED_HIGHLOW	3	The base relocation applies all 32 bits of the difference to the 32-bit field at offset.
IMAGE_REL_BASED_HIGHADJ	4	The base relocation adds the high 16 bits of the difference to the 16-bit field at offset. The 16-bit field represents the high value of a 32-bit word. The low 16 bits of the 32-bit value are stored in the 16-bit word that follows this base relocation. This means that this base relocation occupies two slots.
IMAGE_REL_BASED_MIPS_JMPADDR	5	The relocation interpretation is dependent on the machine type. When the machine type is MIPS, the base relocation applies to a MIPS jump instruction.
IMAGE_REL_BASED_ARM_MOV32	5	This relocation is meaningfull only when the machine type is ARM or Thumb. The base relocation applies the 32-bit address of a symbol across a consecutive MOVW/MOVT instruction pair.
IMAGE_REL_BASED_RISCV_HIGH20	5	This relocation is only meaningful when the machine type is RISC-V. The base relocation applies to the high 20 bits of a 32-bit absolute address.
	6	Reserved, must be zero.
IMAGE_REL_BASED_THUMB_MOV32	7	This relocation is meaningful only when the machine type is Thumb. The base relocation applies the 32-bit address of a symbol to a consecutive MOVW/MOVT instruction pair.
IMAGE_REL_BASED_RISCV_LOW12I	7	This relocation is only meaningful when the machine type is RISC-V. The base relocation applies to the low 12 bits of a 32-bit absolute address formed in RISC-V I-type instruction format.
IMAGE_REL_BASED_RISCV_LOW12S	8	This relocation is only meaningful when the machine type is RISC-V. The base relocation applies to the low 12 bits of a 32-bit absolute address formed in RISC-V S-type instruction format.
IMAGE_REL_BASED_MIPS_JMPADDR16	9	The relocation is only meaningful when the machine type is MIPS. The base relocation applies to a MIPS16 jump instruction.
IMAGE_REL_BASED_DIR64	10	The base relocation applies the difference to the 64-bit field at offset.

6.7 The.tls Section

The .tls section provides directPE and COFF support for static thread local storage (TLS). TLS is a specialstorage class that Windows supports in which a data object is not an automatic(stack) variable, yet is local to each individual thread that runs the code.Thus, each thread can maintain a different value for a variable declared by usingTLS.

Note that any amount of TLS data can besupported by using the API callsTlsAlloc, TlsFree, TlsSetValue,andTlsGetValue. The PE or COFF implementation is an alternativeapproach to using the API and has the advantage of being simpler from thehigh-level-language programmer’s viewpoint. This implementation enables TLSdata to be defined and initialized similarly to ordinary static variables in aprogram. For example, in Visual C++, a static TLS variable can be defined asfollows, without using the Windows API:

__declspec (thread) int tlsFlag = 1;

 

To support this programming construct,the PE and COFF.tls section specifies the following information:initialization data, callback routines for per-thread initialization andtermination, and the TLS index, which are explained in the following discussion.

Note

Statically declared TLS data objects can beused only in statically loaded image files. This fact makes it unreliable touse static TLS data in a DLL unless you know that the DLL, or anythingstatically linked with it, will never be loaded dynamically with the LoadLibraryAPI function.

 

Executable code accesses a static TLSdata object through the following steps:

1.   Atlink time, the linker sets the Address of Index field of the TLS directory.This field points to a location where the program expects to receive the TLSindex.

The Microsoft run-time libraryfacilitates this process by defining a memory image of the TLS directory andgiving it the special name “__tls_used” (Intel x86 platforms) or “_tls_used”(other platforms). The linker looks for this memory image and uses the datathere to create the TLS directory. Other compilers that support TLS and workwith the Microsoft linker must use this same technique.

2.   Whena thread is created, the loader communicates the address of the thread’s TLSarray by placing the address of the thread environment block (TEB) in the FSregister. A pointer to the TLS array is at the offset of 0x2C from thebeginning of TEB. This behavior is Intel x86-specific.

3.   Theloader assigns the value of the TLS index to the place that was indicated bythe Address of Index field.

4.   Theexecutable code retrieves the TLS index and also the location of the TLS array.

5.   The code uses the TLS index and the TLS arraylocation (multiplying the index by 4 and using it as an offset to the array) toget the address of the TLS data area for the given program and module. Eachthread has its own TLS data area, but this is transparent to the program, whichdoes not need to know how data is allocated for individual threads.

6.   Anindividual TLS data object is accessed as some fixed offset into the TLS dataarea.

 

The TLS array is an array of addressesthat the system maintains for each thread. Each address in this array gives thelocation of TLS data for a given module (EXE or DLL) within the program. TheTLS index indicates which member of the array to use. The index is a number(meaningful only to the system) that identifies the module.

6.7.1 TheTLS Directory

The TLS directory has the followingformat:

Offset (PE32/ PE32+)	Size (PE32/ PE32+)	Field	Description
0	4/8	Raw Data Start VA	The starting address of the TLS template. The template is a block of data that is used to initialize TLS data. The system copies all of this data each time a thread is created, so it must not be corrupted. Note that this address is not an RVA; it is an address for which there should be a base relocation in the .reloc section.
4/8	4/8	Raw Data End VA	The address of the last byte of the TLS, except for the zero fill. As with the Raw Data Start VA field, this is a VA, not an RVA.
8/16	4/8	Address of Index	The location to receive the TLS index, which the loader assigns. This location is in an ordinary data section, so it can be given a symbolic name that is accessible to the program.
12/24	4/8	Address of Callbacks	The pointer to an array of TLS callback functions. The array is null-terminated, so if no callback function is supported, this field points to 4 bytes set to zero. For information about the prototype for these functions, see section 6.7.2, “TLS Callback Functions.”
16/32	4	Size of Zero Fill	The size in bytes of the template, beyond the initialized data delimited by the Raw Data Start VA and Raw Data End VA fields. The total template size should be the same as the total size of TLS data in the image file. The zero fill is the amount of data that comes after the initialized nonzero data.
20/36	4	Characteristics	The four bits [23:20] describe alignment info.  Possible values are those defined as IMAGE_SCN_ALIGN_*, which are also used to describe alignment of section in object files.  The other 28 bits are reserved for future use.

6.7.2 TLSCallback Functions

The program can provide one or more TLScallback functions to support additional initialization and termination for TLSdata objects. A typical use for such a callback function would be to callconstructors and destructors for objects.

Although there is typically no more thanone callback function, a callback is implemented as an array to make itpossible to add additional callback functions if desired. If there is more thanone callback function, each function is called in the order in which itsaddress appears in the array. A null pointer terminates the array. It isperfectly valid to have an empty list (no callback supported), in which casethe callback array has exactly one member—a null pointer.

The prototype for a callback function(pointed to by a pointer of type PIMAGE_TLS_CALLBACK) has the same parametersas a DLL entry-point function:

typedef VOID

(NTAPI *PIMAGE_TLS_CALLBACK) (

    PVOID DllHandle,

    DWORD Reason,

    PVOID Reserved

    );

 

The Reserved parameter should be set to zero.The Reason parameter can take the following values:

Setting	Value	Description
DLL_PROCESS_ATTACH	1	A new process has started, including the first thread.
DLL_THREAD_ATTACH	2	A new thread has been created. This notification sent for all but the first thread.
DLL_THREAD_DETACH	3	A thread is about to be terminated. This notification sent for all but the first thread.
DLL_PROCESS_DETACH	0	A process is about to terminate, including the original thread.

6.8 TheLoad Configuration Structure (Image Only)

The load configuration structure(IMAGE_LOAD_CONFIG_DIRECTORY) was formerly used in very limited cases in the WindowsNT operating system itself to describe various features too difficult or too largeto describe in the file header or optional header of the image. Currentversions of the Microsoft linker and Windows XP and later versions ofWindows use a new version of this structure for 32-bit x86-based systems thatinclude reserved SEH technology. This provides a list of safe structuredexception handlers that the operating system uses during exception dispatching.If the handler address resides in an image’s VA range and is marked as reservedSEH-aware (that is, IMAGE_DLLCHARACTERISTICS_NO_SEH is clear in theDllCharacteristics field of the optional header, as described earlier), thenthe handler must be in the list of known safe handlers for that image. Otherwise,the operating system terminates the application. This helps prevent the “x86exception handler hijacking” exploit that has been used in the past to takecontrol of the operating system.

The Microsoft linker automaticallyprovides a default load configuration structure to include the reserved SEH data.If the user code already provides a load configuration structure, it mustinclude the new reserved SEH fields. Otherwise, the linker cannot include the reservedSEH data and the image is not marked as containing reserved SEH.

6.8.1 LoadConfiguration Directory

The data directory entry for a pre-reservedSEH load configuration structure must specify a particular size of the loadconfiguration structure because the operating system loader always expects itto be a certain value. In that regard, the size is really only a version check.For compatibility with Windows XP and earlier versions of Windows, the sizemust be 64 for x86 images.

6.8.2 LoadConfiguration Layout

The load configuration structure has thefollowing layout for 32-bit and 64-bit PE files:

Offset	Size	Field	Description
0	4	Characteristics	Flags that indicate attributes of the file, currently unused.
4	4	TimeDateStamp	Date and time stamp value. The value is represented in the number of seconds that have elapsed since midnight (00:00:00), January 1, 1970, Universal Coordinated Time, according to the system clock. The time stamp can be printed by using the C runtime (CRT) time function.
8	2	MajorVersion	Major version number.
10	2	MinorVersion	Minor version number.
12	4	GlobalFlagsClear	The global loader flags to clear for this process as the loader starts the process.
16	4	GlobalFlagsSet	The global loader flags to set for this process as the loader starts the process.
20	4	CriticalSectionDefaultTimeout	The default timeout value to use for this process’s critical sections that are abandoned.
24	4/8	DeCommitFreeBlockThreshold	Memory that must be freed before it is returned to the system, in bytes.
28/32	4/8	DeCommitTotalFreeThreshold	Total amount of free memory, in bytes.
32/40	4/8	LockPrefixTable	[x86 only] The VA of a list of addresses where the LOCK prefix is used so that they can be replaced with NOP on single processor machines.
36/48	4/8	MaximumAllocationSize	Maximum allocation size, in bytes.
40/56	4/8	VirtualMemoryThreshold	Maximum virtual memory size, in bytes.
44/64	4/8	ProcessAffinityMask	Setting this field to a non-zero value is equivalent to calling SetProcessAffinityMask with this value during process startup (.exe only)
48/72	4	ProcessHeapFlags	Process heap flags that correspond to the first argument of the HeapCreate function. These flags apply to the process heap that is created during process startup.
52/76	2	CSDVersion	The service pack version identifier.
54/78	2	Reserved	Must be zero.
56/80	4/8	EditList	Reserved for use by the system.
60/88	4/8	SecurityCookie	A pointer to a cookie that is used by Visual C++ or GS implementation.
64/96	4/8	SEHandlerTable	[x86 only] The VA of the sorted table of RVAs of each valid, unique SE handler in the image.
68/104	4/8	SEHandlerCount	[x86 only] The count of unique handlers in the table.
72/112	4/8	GuardCFCheckFunctionPointer	The VA where Control Flow Guard check-function pointer is stored.
76/120	4/8	GuardCFDispatchFunctionPointer	The VA where Control Flow Guard  dispatch-function pointer is stored.
80/128	4/8	GuardCFFunctionTable	The VA of the sorted table of RVAs of each Control Flow Guard function in the image.
84/136	4/8	GuardCFFunctionCount	The count of unique RVAs in the above table.
88/144	4	GuardFlags	Control Flow Guard related flags.

 

6.9 The.rsrc Section

Resources are indexed by a multiple-levelbinary-sorted tree structure. The general design can incorporate 2**31 levels.By convention, however, Windows uses three levels:

Type

Name

Language

 

A series of resource directory tablesrelates all of the levels in the following way: Each directory table isfollowed by a series of directory entries that give the name or identifier (ID)for that level (Type, Name, or Language level) and an address of either a datadescription or another directory table. If the address points to a datadescription, then the data is a leaf in the tree. If the address points to anotherdirectory table, then that table lists directory entries at the next leveldown.

A leaf’s Type, Name, and Language IDs aredetermined by the path that is taken through directory tables to reach theleaf. The first table determines Type ID, the second table (pointed to by thedirectory entry in the first table) determines Name ID, and the third tabledetermines Language ID.

The general structure of the.rsrc section is:

Data	Description
Resource Directory Tables (and Resource Directory Entries)	A series of tables, one for each group of nodes in the tree. All top-level (Type) nodes are listed in the first table. Entries in this table point to second-level tables. Each second-level tree has the same Type ID but different Name IDs. Third-level trees have the same Type and Name IDs but different Language IDs. Each individual table is immediately followed by directory entries, in which each entry has a name or numeric identifier and a pointer to a data description or a table at the next lower level.
Resource Directory Strings	Two-byte-aligned Unicode strings, which serve as string data that is pointed to by directory entries.
Resource Data Description	An array of records, pointed to by tables, that describe the actual size and location of the resource data. These records are the leaves in the resource-description tree.
Resource Data	Raw data of the resource section. The size and location information in the Resource Data Descriptions field delimit the individual regions of resource data.

6.9.1Resource Directory Table

Each resource directory table has thefollowing format. This data structure should be considered the heading of atable because the table actually consists of directory entries (described in section6.9.2, "Resource Directory Entries") and this structure:

Offset	Size	Field	Description
0	4	Characteristics	Resource flags. This field is reserved for future use. It is currently set to zero.
4	4	Time/Date Stamp	The time that the resource data was created by the resource compiler.
8	2	Major Version	The major version number, set by the user.
10	2	Minor Version	The minor version number, set by the user.
12	2	Number of Name Entries	The number of directory entries immediately following the table that use strings to identify Type, Name, or Language entries (depending on the level of the table).
14	2	Number of ID Entries	The number of directory entries immediately following the Name entries that use numeric IDs for Type, Name, or Language entries.

6.9.2Resource Directory Entries

The directory entries make up the rowsof a table. Each resource directory entry has the following format. Whether theentry is a Name or ID entry is indicated by the resource directory table, whichindicates how many Name and ID entries follow it (remember that all the Nameentries precede all the ID entries for the table). All entries for the tableare sorted in ascending order: the Name entries by case-sensitive string andthe ID entries by numeric value.  Offsetsare relative to the address in the IMAGE_DIRECTORY_ENTRY_RESOURCEDataDirectory.

Offset	Size	Field	Description
0	4	Name Offset	The offset of a string that gives the Type, Name, or Language ID entry, depending on level of table.
0	4	Integer ID	A 32-bit integer that identifies the Type, Name, or Language ID entry.
4	4	Data Entry Offset	High bit 0. Address of a Resource Data entry (a leaf).
4	4	Subdirectory Offset	High bit 1. The lower 31 bits are the address of another resource directory table (the next level down).

6.9.3Resource Directory String

The resource directory string areaconsists of Unicode strings, which are word-aligned. These strings are storedtogether after the last Resource Directory entry and before the first ResourceData entry. This minimizes the impact of these variable-length strings on thealignment of the fixed-size directory entries. Each resource directory stringhas the following format:

Offset	Size	Field	Description
0	2	Length	The size of the string, not including length field itself.
2	variable	Unicode String	The variable-length Unicode string data, word-aligned.

6.9.4Resource Data Entry

Each Resource Data entry describes anactual unit of raw data in the Resource Data area. A Resource Data entry hasthe following format:

Offset	Size	Field	Description
0	4	Data RVA	The address of a unit of resource data in the Resource Data area.
4	4	Size	The size, in bytes, of the resource data that is pointed to by the Data RVA field.
8	4	Codepage	The code page that is used to decode code point values within the resource data. Typically, the code page would be the Unicode code page.
12	4	Reserved, must be 0.

6.10The.cormeta Section (Object Only)

CLR metadata is stored in this section.It is used to indicate that the object file contains managed code. The formatof the metadata is not documented, but can be handed to the CLR interfaces forhandling metadata.

6.11The .sxdata Section

The valid exception handlers of an objectare listed in the .sxdata section of that object. Thesection is marked IMAGE_SCN_LNK_INFO. It contains the COFF symbol index of eachvalid handler, using 4 bytes per index.

Additionally, the compiler marks a COFFobject as registered SEH by emitting the absolute symbol “@feat.00” with the LSBof the value field set to 1. A COFF object with no registered SEH handlerswould have the “@feat.00” symbol, but no .sxdatasection.

7Archive (Library) File Format

The COFF archive format provides astandard mechanism for storing collections of object files. These collectionsare commonly called libraries in programming documentation.

The first 8 bytes of an archiveconsist of the file signature. The rest of the archive consists of a series ofarchive members, as follows:

·      The first and second membersare “linker members.” Each of these members has its own format as described in section8.3, "Import Name Type." Typically, a linker places information intothese archive members. The linker members contain the directory of the archive.

·      The third member is the "longnames"member. This member consists of a series of null-terminated ASCII strings inwhich each string is the name of another archive member.

·      The rest of the archiveconsists of standard (object-file) members. Each of these members contains thecontents of one object file in its entirety.

 

An archive member header precedes eachmember. The following figure shows the general structure of an archive:

Signature :”!<arch>\n”

 

Header

1st Linker Member

 

Header

2nd Linker Member

 

Header

Longnames Member

 

Header

Contents of OBJ File 1 (COFF format)

 

Header

Contents of OBJ File 2 (COFF format)

.

.

.

Header

Contents of OBJ File N (COFF format)

Figure 4. Archive File Structure

7.1Archive File Signature

The archive file signature identifiesthe file type. Any utility (for example, a linker) that takes an archive fileas input can check the file type by reading this signature. The signatureconsists of the following ASCII characters, in which each character below isrepresented literally, except for the newline (\n) character:

!<arch>\n

7.2Archive Member Headers

Each member (linker, longnames, orobject-file member) is preceded by a header. An archive member header has thefollowing format, in which each field is an ASCII text string that is left justifiedand padded with spaces to the end of the field. There is no terminating nullcharacter in any of these fields.

Each member header starts on the firsteven address after the end of the previous archive member.

Offset	Size	Field	Description
0	16	Name	The name of the archive member, with a slash (/) appended to terminate the name. If the first character is a slash, the name has a special interpretation, as described in the following table.
16	12	Date	The date and time that the archive member was created: This is the ASCII decimal representation of the number of seconds since 1/1/1970 UCT.
28	6	User ID	An ASCII decimal representation of the user ID. This field does not contain a meaningful value on Windows platforms because Microsoft tools emit all blanks.
34	6	Group ID	An ASCII decimal representation of the group ID. This field does not contain a meaningful value on Windows platforms because Microsoft tools emit all blanks.
40	8	Mode	An ASCII octal representation of the member’s file mode. This is the ST_MODE value from the C run-time function _wstat.
48	10	Size	An ASCII decimal representation of the total size of the archive member, not including the size of the header.
58	2	End of Header	The two bytes in the C string “‘\n” (0x60 0x0A).

 

The Name field has one of the formatsshown in the following table. As mentioned earlier, each of these strings isleft justified and padded with trailing spaces within a field of 16 bytes:

Contents of Name field	Description
name/	The name of the archive member.
/	The archive member is one of the two linker members. Both of the linker members have this name.
//	The archive member is the longnames member, which consists of a series of null-terminated ASCII strings. The longnames member is the third archive member and must always be present even if the contents are empty.
/n	The name of the archive member is located at offset n within the longnames member. The number n is the decimal representation of the offset. For example: “/26” indicates that the name of the archive member is located 26 bytes beyond the beginning of the longnames member contents.

7.3 FirstLinker Member

The name of the first linker member is“\”. The first linker member is included for backward compatibility. It is notused by current linkers, but its format must be correct. This linker memberprovides a directory of symbol names, as does the second linker member. Foreach symbol, the information indicates where to find the archive member thatcontains the symbol.

The first linker member has thefollowing format. This information appears after the header:

Offset	Size	Field	Description
0	4	Number of Symbols	Unsigned long that contains the number of indexed symbols. This number is stored in big-endian format. Each object-file member typically defines one or more external symbols.
4	4 * n	Offsets	An array of file offsets to archive member headers, in which n is equal to the Number of Symbols field. Each number in the array is an unsigned long stored in big-endian format. For each symbol that is named in the string table, the corresponding element in the offsets array gives the location of the archive member that contains the symbol.
*	*	String Table	A series of null-terminated strings that name all the symbols in the directory. Each string begins immediately after the null character in the previous string. The number of strings must be equal to the value of the Number of Symbols field.

 

The elements in the offsets array must bearranged in ascending order. This fact implies that the symbols in the string tablemust be arranged according to the order of archive members. For example, allthe symbols in the first object-file member would have to be listed before thesymbols in the second object file.

7.4 SecondLinker Member

The second linker member has the name “\”as does the first linker member. Although both linker members provide adirectory of symbols and archive members that contain them, the second linkermember is used in preference to the first by all current linkers. The secondlinker member includes symbol names in lexical order, which enables fastersearching by name.

The second member has the followingformat. This information appears after the header:

Offset	Size	Field	Description
0	4	Number of Members	An unsigned long that contains the number of archive members.
4	4 * m	Offsets	An array of file offsets to archive member headers, arranged in ascending order. Each offset is an unsigned long. The number m is equal to the value of the Number of Members field.
*	4	Number of Symbols	An unsigned long that contains the number of symbols indexed. Each object-file member typically defines one or more external symbols.
*	2 * n	Indices	An array of 1-based indexes (unsigned short) that map symbol names to archive member offsets. The number n is equal to the Number of Symbols field. For each symbol that is named in the string table, the corresponding element in the Indices array gives an index into the offsets array. The offsets array, in turn, gives the location of the archive member that contains the symbol.
*	*	String Table	A series of null-terminated strings that name all of the symbols in the directory. Each string begins immediately after the null byte in the previous string. The number of strings must be equal to the value of the Number of Symbols field. This table lists all the symbol names in ascending lexical order.

7.5Longnames Member

The name of the longnames member is “\\”.The longnames member is a series of strings of archive member names. A nameappears here only when there is insufficient room in the Name field (16 bytes).The longnames member can be empty, though its header must appear.

The strings are null-terminated. Eachstring begins immediately after the null byte in the previous string.

8 Import Library Format

Traditional import libraries, that is,libraries that describe the exports from one image for use by another,typically follow the layout described in section 7, "Archive (Library)File Format."The primary difference is that importlibrary members contain pseudo-object files instead of real ones, in which eachmember includes the section contributions that are required to build the importtables that are described in section 6.4, "The .idataSection." The linker generates this archive while building the exportingapplication.

The section contributions for an importcan be inferred from a small set of information. The linker can either generatethe complete, verbose information into the import library for each member atthe time of the library’s creation or write only the canonical information tothe library and let the application that later uses it generate the necessarydata on the fly.

In an import library with the longformat, a single member contains the following information:

       Archivemember header

       File header

       Section headers

       Data that corresponds to each ofthe section headers

       COFF symbol table

       Strings

In contrast, a short import library iswritten as follows:

       Archivemember header     

       Import header

       Null-terminated import name string

       Null-terminated DLL name string

This is sufficient information to accurately reconstruct the entire contents ofthe member at the time of its use.

8.1 ImportHeader

The import header contains the followingfields and offsets:

Offset	Size	Field	Description
0	2	Sig1	Must be IMAGE_FILE_MACHINE_UNKNOWN. For more information, see section 3.3.1, “Machine Types.”
2	2	Sig2	Must be 0xFFFF.
4	2	Version	The structure version.
6	2	Machine	The number that identifies the type of target machine. For more information, see section 3.3.1, “Machine Types.”
8	4	Time-Date Stamp	The time and date that the file was created.
12	4	Size Of Data	The size of the strings that follow the header.
16	2	Ordinal/Hint	Either the ordinal or the hint for the import, determined by the value in the Name Type field.
18	2 bits	Type	The import type. For specific values and descriptions, see section 8.2, "Import Type."
	3 bits	Name Type	The import name type. For specific values and descriptions, see section 8.3. Import Name Type."
	11 bits	Reserved	Reserved, must be 0.

 

Thisstructure is followed by two null-terminated strings that describe the importedsymbol’s name and the DLL from which it came.

8.2 Import Type

The following values are defined for theType field in the import header:

Constant	Value	Description
IMPORT_CODE	0	Executable code.
IMPORT_DATA	1	Data.
IMPORT_CONST	2	Specified as CONST in the .def file.

 

These values are used to determine whichsection contributions must be generated by the tool that uses the library if itmust access that data.

8.3 Import Name Type

The null-terminated import symbol nameimmediately follows its associated import header. The following values aredefined for the Name Type field in the import header. They indicate how thename is to be used to generate the correct symbols the represent the import:

Constant	Value	Description
IMPORT_ORDINAL	0	The import is by ordinal. This indicates that the value in the Ordinal/Hint field of the import header is the import’s ordinal. If this constant is not specified, then the Ordinal/Hint field should always be interpreted as the import’s hint.
IMPORT_NAME	1	The import name is identical to the public symbol name.
IMPORT_NAME_NOPREFIX	2	The import name is the public symbol name, but skipping the leading ?, @, or optionally _.
IMPORT_NAME_UNDECORATE	3	The import name is the public symbol name, but skipping the leading ?, @, or optionally _, and truncating at the first @.

Appendix A: CalculatingAuthenticode PE Image Hash

Several attribute certificates areexpected to be used to verify the integrity of the images. However, the mostcommon is Authenticode signature. An Authenticode signature can be used toverify that the relevant sections of a PE image file have not been altered inany way from the file’s original form. To accomplish this task, Authenticodesignatures contain something called a PE image hash.

A.1 What is an Authenticode PEImage Hash?

The Authenticode PE image hash, or filehash for short, is similar to a file checksum in that it produces a small valuethat relates to the integrity of a file. A checksum is produced by a simplealgorithm and is used primarily to detect memory failures. That is, it is usedto detect whether a block of memory on disk has gone bad and the values storedthere have become corrupted. A file hash is similar to a checksum in that italso detects file corruption. However, unlike most checksum algorithms, it isvery difficult to modify a file so that it has the same file hash as itsoriginal (unmodified) form. That is, a checksum is intended to detect simplememory failures that lead to corruption, but a file hash can be used to detectintentional and even subtle modifications to a file, such as those introducedby viruses, hackers, or Trojan horse programs.

In an Authenticode signature, the filehash is digitally signed by using a private key known only to the signer of thefile. A software consumer can verify the integrity of the file by calculatingthe hash value of the file and comparing it to the value of signed hashcontained in the Authenticode digital signature. If the file hashes do notmatch, part of the file covered by the PE image hash has been modified.  

A.2 What is Covered in anAuthenticode PE Image Hash?

It is not possible or desirable toinclude all image file data in the calculation of the PE image hash. Sometimes itsimply presents undesirable characteristics (for example, debugging informationcannot be removed from publicly released files); sometimes it is simplyimpossible. For example, it is not possible to include all information withinan image file in an Authenticode signature, then insert the Authenticodesignature that contains that PE image hash into the PE image, and later be ableto generate an identical PE image hash by including all image file data in thecalculation again, because the file now contains the Authenticode signature thatwas not originally there.

This appendix illustrates how a PE imagehash is calculated and what parts of the PE image can be modified withoutinvalidating the Authenticode signature.

It is worth noting that the PE image hashfor a specific file can be included in a separate catalog file withoutincluding an attribute certificate within the hashed file. This is relevant,because it becomes possible to invalidate the PE image hash in an Authenticode-signedcatalog file by modifying a PE image that does not actually contain anAuthenticode signature.

Process for Generating the Authenticode PE Image Hash

All data in sections of the PE image thatare specified in the section table are hashed in their entirety except for thefollowing exclusion ranges:

·      The fileCheckSum field of the Windows-specific fields of the optional header. This checksum includes the entire file (including any attributecertificates in the file). In all likelihood, the checksum will be differentthan the original value after inserting the Authenticode signature.

·      Informationrelated to attribute certificates. The areas ofthe PE image that are related to the Authenticode signature are not included inthe calculation of the PE image hash because Authenticode signatures can beadded to or removed from an image without affecting the overall integrity ofthe image. This is not a problem, because there are user scenarios that dependon re-signing PE images or adding a time stamp. Authenticode excludes thefollowing information from the hash calculation:

The Certificate Table field of theoptional header data directories.

The Certificate Table andcorresponding certificates that are pointed to by the Certificate Table fieldlisted immediately above.

 

To calculate the PE image hash,Authenticode orders the sections that are specified in the section table byaddress range, then hashes the resulting sequence of bytes, passing over theexclusion ranges.

·      Informationpast of the end of the last section. The area past the last section (defined by highest offset)is not hashed. This area commonly contains debug information. Debug informationcan generally be considered advisory to debuggers; it does not affect theactual integrity of the executable program. It is quite literally possible toremove debug information from an image after a product has been delivered andnot affect the functionality of the program. In fact, this is sometimes done asa disk-saving measure. It is worth noting that debug information containedwithin the specified sections of the PE Image cannot be removed withoutinvaliding the Authenticode signature.

 

You can use the makecert and signtooltools provided in the Windows Platform SDK to experiment with creating andverifying Authenticode signatures. For more information, see"References" at the end of this specification.

References

IDL Attributes

http://msdn2.microsoft.com/en-US/library/8tesw2eh.aspx

Creating, Viewing, and Managing Certificates

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/seccrypto/security/creating_viewing_and_managing_certificates.asp 

Makecert

http://windowssdk.msdn.microsoft.com/library/en-us/seccrypto/security/makecert.asp

SignTool

http://windowssdk.msdn.microsoft.com/library/en-us/seccrypto/security/signtool.asp

Windows Server R2 2003 Platform SDK

http://www.microsoft.com/downloads/details.aspx?FamilyId=0BAF2B35-C656-4969-ACE8-E4C0C0716ADB&displaylang=en