Chain INPUT (policy ACCEPT)
target prot opt source destination
target prot opt source destination
target prot opt source destination
target prot opt source destination
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 255
ACCEPT esp -- 0.0.0.0/0 0.0.0.0/0
ACCEPT ah -- 0.0.0.0/0 0.0.0.0/0
ACCEPT udp -- 0.0.0.0/0 224.0.0.251 udp dpt:5353
ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:631
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80
ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25
REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
可以看出我在安装linux时,选择了有防火墙,并且开放了22,80,25端口.
Chain INPUT (policy ACCEPT)
target prot opt source destination
target prot opt source destination
target prot opt source destination
[root@tp ~]# iptables -X 清除预设表filter中使用者自定链中的规则
Chain INPUT (policy ACCEPT)
target prot opt source destination
target prot opt source destination
target prot opt source destination
上面的意思是,当超出了IPTABLES里filter表里的两个链规则(INPUT,FORWARD)时,不在这两个规则里的数据包怎么处理呢,那就是DROP(放弃).应该说这样配置是很安全的.我们要控制流入数据包
如果做了邮件服务器,开启25,110端口.
[root@tp ~]# iptables -A INPUT -p tcp --dport 25 -j ACCEPT
如果做了FTP服务器,开启21端口
iptables -A INPUT -p udp --sport 53 -j ACCEPT
iptables -A OUTPUT -p udp --dport 53 -j ACCEPT
iptables -A INPUT -p udp --dport 53 -j ACCEPT
iptables -A OUTPUT -p udp --sport 53 -j ACCEPT
IPTABLES -A OUTPUT -o lo -p all -j ACCEPT(如果是OUTPUT DROP)
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
target prot opt source destination
SNAT all -- 192.168.0.0/24 anywhere to:211.101.46.235
target prot opt source destination
[root@tp sysconfig]# iptables -t nat -A PREROUTING -i eth0 -s 172.16.0.0/12 -j DROP
[root@tp sysconfig]# iptables -t nat -A PREROUTING -i eth0 -s 192.168.0.0/16 -j DROP
如果我们想,比如阻止MSN,QQ,BT等的话,需要找到它们所用的端口或者IP,(个人认为没有太大必要)
[root@tp ~]# iptables -A INPUT -m state --state INVALID -j DROP
[root@tp ~]# iptables -A OUTPUT -m state --state INVALID -j DROP
[root@tp ~]# iptables-A FORWARD -m state --state INVALID -j DROP
允许所有已经建立的和相关的连接
[root@tp ~]# iptables-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
[root@tp ~]# iptables-A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
[root@tp ~]# /etc/rc.d/init.d/iptables save
这样就可以写到/etc/sysconfig/iptables文件里了.写入后记得把防火墙重起一下,才能起作用.
[root@tp ~]# service iptables restart
别忘了保存,不行就写一部保存一次.你可以一边保存,一边做实验,看看是否达到你的要求,
上面的所有规则我都试过,没有问题.
写这篇文章,用了我将近1个月的时间.查找资料,自己做实验,希望对大家有所帮助.如有不全及不完善的地方还请提出.
因为本篇文章以配置为主.关于IPTABLES的基础知识及指令命令说明等我会尽快传上,当然你可以去网上搜索一下,还是很多的.
开放不连续端口(包括单个):
iptables -A INPUT -p tcp -m multiport --dport 21,20 -j ACCEPT
其他都关闭:
iptables -A INPUT -p tcp -j REJECT --reject-with tcp-reset
开放连续端口:
iptables -A RH-Firewall-1-INPUT -m state --state NEW -m udp -p udp --dport 8001:8140 -j ACCEPT
iptables -L列出所有规则
还可以直接修改/etc/sysconfig/iptables,如何写,参考已开端口,或者按照上面的命令填写即可
重新启动iptables
service iptables restart
但是我们在配置服务器时候往往是只打开某个端口,其他的端口全部 iptables -L iptables -L -n |