Figure 1/H.323 - Interoperability of H.323 terminals
Figure 2/H.323 - Mixed multipoint conference
Figure 3/H.323 - Zone
Figure 4/H.323 - H.323 terminal equipment
Figure 5/H.323 - H.323 gateway configurations
Figure 6/H.323 - Possible locations of MC and MP in H.323 system
Figure 7/H.323 - Auto Discovery
Figure 8/H.323 - Registration
Figure 9/H.323 - Gatekeeper routed call signalling
Figure 10/H.323 - Direct endpoint call signalling
Figure 11/H.323 - Direct H.245 control channel connection between endpoints
Figure 12/H.323 - Gatekeeper routed H.245 control
Figure 13/H.323 - Basic call set-up, no Gatekeepers
Figure 14/H.323 - Both endpoints registered, same Gatekeeper - Direct call signalling
Figure 15/H.323 - Both endpoints registered, same Gatekeeper - Gatekeeper routed call signalling
Figure 16/H.323 - Only calling endpoint registered - Direct call signalling
Figure 17/H.323 - Only calling endpoint registered - Gatekeeper routed call signalling
Figure 18/H.323 - Only called endpoint registered - Direct call signalling
Figure 19/H.323 - Only called endpoint registered - Gatekeeper routed call signalling
Figure 20/H.323 - Both endpoints registered - Both gatekeepers direct call signalling
Figure 21/H.323 - Both endpoint registered - Direct/routed call signalling
Figure 22/H.323 - Both endpoint registered - Routed/direct call signalling
Figure 23/H.323 - Both endpoint registered - Both Gatekeepers routing call signalling
Figure 24/H.323 Optional Called Endpoint Signalling
Figure 25/H.323 - Bandwidth change request - Transmitter change
Figure 26/H.323 - Bandwidth change request - Receiver change
Figure 27/H.323 - MC invite signalling
Figure 28/H.323 - Non-MC invite signalling
Figure 29/H.323 - MC join signalling
Figure 30/H.323 - Non-MC join signalling
Figure 31/H.323 - Gatekeeper routed invite signalling
Figure 32/H.323 - Gatekeeper routed join signalling
Figure 33/H.323 - Endpoint initiated call clearing
Figure 34/H.323 - Gatekeeper initiated call clearing
Figure 35/H.323 - Loop back
Figure B.1/H.323 - Model with layered video
Figure B.2/H.323 - Endpoints attach to one or more layers according to bandwidth
Figure B.3/H.323 - Endpoints attach to single Layer according to bandwidth
Figure C.1/H.323 - Architecture for H.323 on ATM-AAL5
Figure C.2/H.323 - H.323 call establishment showing ATM effect. ATM VC's used unidirectionally
Figure C.3/H.323 - H.323 call establishment showing ATM effect. ATM VC's used bidirectionally
Figure II.1/H.323 - Resource reservation for a point-to-point connection
Figure II.2/H.323 - Resource reservation for a point-to-multipoint connection
Figure II.3/H.323 - Message sequence for opening a unicast logical channel with RSVP
Figure II.4/H.323 - Message sequence for opening a multicast logical channel with RSVP
Figure III.1/H.323 - Example of User Location using H.225/Q.931 Signalling (RAS signalling not shown for clarity)
Figure III.2/H.323 - Example of User Location using H.225/Q.931 Signalling (RAS signalling not shown for clarity)
Figure 2/H.323 - Mixed multipoint conference
Figure 3/H.323 - Zone
Figure 4/H.323 - H.323 terminal equipment
Figure 5/H.323 - H.323 gateway configurations
Figure 6/H.323 - Possible locations of MC and MP in H.323 system
Figure 7/H.323 - Auto Discovery
Figure 8/H.323 - Registration
Figure 9/H.323 - Gatekeeper routed call signalling
Figure 10/H.323 - Direct endpoint call signalling
Figure 11/H.323 - Direct H.245 control channel connection between endpoints
Figure 12/H.323 - Gatekeeper routed H.245 control
Figure 13/H.323 - Basic call set-up, no Gatekeepers
Figure 14/H.323 - Both endpoints registered, same Gatekeeper - Direct call signalling
Figure 15/H.323 - Both endpoints registered, same Gatekeeper - Gatekeeper routed call signalling
Figure 16/H.323 - Only calling endpoint registered - Direct call signalling
Figure 17/H.323 - Only calling endpoint registered - Gatekeeper routed call signalling
Figure 18/H.323 - Only called endpoint registered - Direct call signalling
Figure 19/H.323 - Only called endpoint registered - Gatekeeper routed call signalling
Figure 20/H.323 - Both endpoints registered - Both gatekeepers direct call signalling
Figure 21/H.323 - Both endpoint registered - Direct/routed call signalling
Figure 22/H.323 - Both endpoint registered - Routed/direct call signalling
Figure 23/H.323 - Both endpoint registered - Both Gatekeepers routing call signalling
Figure 24/H.323 Optional Called Endpoint Signalling
Figure 25/H.323 - Bandwidth change request - Transmitter change
Figure 26/H.323 - Bandwidth change request - Receiver change
Figure 27/H.323 - MC invite signalling
Figure 28/H.323 - Non-MC invite signalling
Figure 29/H.323 - MC join signalling
Figure 30/H.323 - Non-MC join signalling
Figure 31/H.323 - Gatekeeper routed invite signalling
Figure 32/H.323 - Gatekeeper routed join signalling
Figure 33/H.323 - Endpoint initiated call clearing
Figure 34/H.323 - Gatekeeper initiated call clearing
Figure 35/H.323 - Loop back
Figure B.1/H.323 - Model with layered video
Figure B.2/H.323 - Endpoints attach to one or more layers according to bandwidth
Figure B.3/H.323 - Endpoints attach to single Layer according to bandwidth
Figure C.1/H.323 - Architecture for H.323 on ATM-AAL5
Figure C.2/H.323 - H.323 call establishment showing ATM effect. ATM VC's used unidirectionally
Figure C.3/H.323 - H.323 call establishment showing ATM effect. ATM VC's used bidirectionally
Figure II.1/H.323 - Resource reservation for a point-to-point connection
Figure II.2/H.323 - Resource reservation for a point-to-multipoint connection
Figure II.3/H.323 - Message sequence for opening a unicast logical channel with RSVP
Figure II.4/H.323 - Message sequence for opening a multicast logical channel with RSVP
Figure III.1/H.323 - Example of User Location using H.225/Q.931 Signalling (RAS signalling not shown for clarity)
Figure III.2/H.323 - Example of User Location using H.225/Q.931 Signalling (RAS signalling not shown for clarity)