一、定义:
linux/include/linux/device.h
二、作用: 用于描述设备相关的信息设备之间的层次关系,以及设备与总线、驱动的关系。 三、详解: 1、struct klist klist_children; struct klist被定义在linux/include/linux/klist.h中,原型是:
可见它是对struct list_head的扩展,在此它的作用是连接设备列表中的孩子列表。 2、struct klist_node knode_parent; /* node in sibling list */ struct klist_node被定义在linux/include/linux/klist.h,原型是:
在此它的作用是表示它的兄弟节点。 3、struct klist_node knode_driver; 表示它的驱动节点。 4、struct klist_node knode_bus; 表示总线节点。 5、struct device *parent; 指向其父设备。 6、struct kobject kobj; 这里http://blog.chinaunix.net/u1/55599/showart.php?id=1086478 有对kobject的解释,此处它是内嵌的一个kobject对象。 7、char bus_id[BUS_ID_SIZE]; bus_id表示其在父总线上的位置。BUS_ID_SIZE被定义为:
所以表示位置的字符串长度不能超过20。 8、struct device_type *type; 被定义在/linux/include/linux/device.h中,原型是:
device_type结构表示设备的类型。一个设备类或者总线可以包含不同类型的设备,例如“分区”和“磁盘” , “鼠标”和“事件” 。device_type就可以标识某个设备类型和该设备的特有信息,它就等同于kobject结构中的kobj_type一样。如果name数据成员被指定,那么uevent成员函数就会把它包含在DEVTYPE变量中。 9、unsigned is_registered:1; 标识该设备是否已经被注册过。is_registered:1这样的形式表示is_registered这个变量只有一位。在32位linux系统下,unsigned是4字节32位,而经过is_registered:1这样的限制后,变量is_registered只有一位,其取值只能是1或者0,相当于声明了一个boolean类型的变量。在此种用法中,后面指定数据宽度的值只能大于0且小于本身的数据宽度。 10、struct bus_type * bus; 指向所连接总线的指针。 11、struct device_driver *driver; 指向被分配到该设备的设备驱动。 12、u64 *dma_mask; /*指向设备DMA屏蔽字。*/ u64 coherent_dma_mask;/*设备一致性DMA的屏蔽字。*/ struct list_head dma_pools; /*聚集的DMA缓冲池。*/ struct dma_coherent_mem *dma_mem; /*指向设备所使用的一致性DMA存储器描述符的指针*/ 13、spinlock_t devres_lock; 定义一个设备自旋锁,用于互斥访问设备。关于自旋锁的详细讲解参考: http://www.deansys.com/doc/ldd3/ch05s05.html 14、void (*release)(struct device * dev); 释放设备描述符的回调函数。 四、操作: linux内核系统了一系列完整的对device操作的函数。 1、其中device_register()函数用来将一个新的device对象插入设备模型。它在linux/drivers/base/core.c中被实现:
该函数首先是调用device_initialize()初始化device结构,具体是初始化嵌入的kobject结构dev->kobj,初始化列表中的孩子列表kobj->klist_children,初始化DMA缓冲池dev->dma_pools,初始化自旋锁dev->devres_lock等。接下来device_add()函数才真正将该device对象dev插入设备模型中。device_add()函数首先是通过kboject_add()函数将它添加到kobject层次,再把它添加都全局和兄弟链表中,最后添加到其他相关的子系统的驱动程序模型,完成device对象的注册。 2、device_unregister()完成相反的过程:/linux/drivers/base/core.c
它会先以KERN_DEBUG级别打印注销设备的信息,然后才真正删除设备,减少设备对象的引用计数。 3、get_device()和put_device()分别是增加和减少设备对象的引用计数。这两个函数都定义在:/linux/drivers/base/core.c中。具体是应用在注册device对象时,device_add()函数会调用get_device()增加对该device对象的引用计数。在注销设备对象时,device_unregister()函数直接调用put_device()函数减少对该device对象的引用计数。 |