- 博客(1)
- 资源 (6)
- 收藏
- 关注
翻译 ADAMS shortcut
T+左键 平动模型R+左键 旋转模型Z+左键 动态缩放 F或Ctrl+F 以最大比例全面显示模型S+左键 沿着垂直于屏幕的轴线旋转W+左键 将屏幕的一部分放大C+左键 定制旋转中心 E+左键 将某构件的XY平面作为观察面G 切换工作格栅的隐藏与显示V
2017-12-09 12:14:20 446
NMEA到KMZ Ver 3.16
把nema数据如GPGGA等转换为kmz文件,直接导入google erath
1.固定的时间逆转的措施的错误在CSV时读取。
2.现在可以识别扩展名为“.txt”的CSV文件。
2018-09-14
计算机外围设备
7.1 外围设备概述
7.2 磁盘存储设备
7.3 磁盘存储设备的技术发展
7.4 磁带存储设备
7.5 光盘和磁光盘存储设备
7.6 显示设备
7.7 输入设备和打印设备
2018-05-30
Shell脚本编程基础知识
Shell脚本编程基础知识:
掌握创建 shell 脚本的基本步骤
学会使用条件测试
掌握 if 条件结构与 case 选择结构
掌握 for 循环、while 循环和 until 循环结构
学会 shift 命令的使用
学会 shell 脚本的调试
2018-03-14
汇编软件winall
Where to start?
Click code examples and select Hello, world. A code example with many comments should open. All comments are green and they take up about 90% of all text, so don't be scared by this tiny "Hello Word" code. The compiled executable is only about 100 bytes long, because it uses no interrupts and has only one loop for color highlighting the text. All other code is straight-forward and writes directly to video memory.
To run this example in the emulator, click emulate (or press F5). The program then attmepts to assemble and save the executable to c:\emu8086\MyBuild. If the assembler succeeds in creating the file, the emulator will also automatically load it into memory.
You can then click single step (or press F8) to step through the code one instruction at a time, observing changes in registers and the emulator screen. You can also click step back (or press F6) to see what happens when reversing those changes.
There are many ways to print "Hello,World" in assembly language, and this certainly isn't the shortest way. If you click examples and browse c:\emu8086\examples, you'll find HelloWorld.asm which assembles into only a 30-byte executable. Unlike the previous example which carries out each step by itself, this one is much smaller because it uses a built-in interrupt function of the operating system to write to the display.
2015-12-02
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人