xiaomi 3G ssh ptp52

• 开ssh

        www1.miwifi.com/miwifi_open.html
        http://d.miwifi.com/rom/ssh

1. 请将下载的工具包bin文件复制到U盘（FAT/FAT32格式）的根目录下，保证文件名为miwifi_ssh.bin；
2. 断开小米路由器的电源，将U盘插入USB接口；
3. 按住reset按钮之后重新接入电源，指示灯变为黄色闪烁状态即可松开reset键；
4. 等待3-5秒后安装完成之后，小米路由器会自动重启，之后您就可以尽情折腾啦 ：）
   

• https://router-sh.ptpt52.com/rom/
  

        Installation through telnet/ssh:

copy lede-ramips-mt7621-mir3g-squashfs-kernel1.bin and lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin to usb disk or wget it from LEDE download site to /tmp
switch to /extdisks/sda1/ (if copied to USB drive) or to /tmp if wgetted from LEDE download site
run: mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1
run: mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0
run: nvram set flag_try_sys1_failed=1
run: nvram commit
run: reboot

• 安装web界面

   opkg install luci luci-i18n-base-zh-cn

  
  

• 安装磁盘查看

  opkg install fdisk e2fsprogs

  
  

• usb相关   

  opkg install kmod-usb-corekmod-usb-ohci kmod-usb-uhci kmod-usb2 usbutilskmod-usb3

  
  

• usb存储相关opkg install kmod-usb-storage kmod-fs-ext4kmod-usb-storage kmod-usb-storage-extras block-mountkmod-scsi-core kmod-usb-storage-uas kmod-scsi-generickmod-usb-ledtrig-usbport

• transmission安装配置

opkg install transmission-daemon-mbedtls transmission-web luci-app-transmission

• frpc initd脚本配置

#!/bin/sh /etc/rc.common
# Copyright (C) 2010-2012 OpenWrt.org

START=99

start() {
        /root/frp/frpc -c /root/frp/frpc.ini &
}

stop() {
        killall frpc}

ln -s /root/frp/frpcini /etc/init.d/frpc