mke2fs.conf

NAME
       mke2fs.conf - Configuration file for mke2fs

DESCRIPTION
       mke2fs.conf  is	the configuration file for mke2fs(8).  It controls the
       default parameters used by mke2fs(8) when it is creating ext2  or  ext3
       filesystems.

       The  mke2fs.conf	 file uses an INI-style format.	 Stanzas, or top-level
       sections, are delimited by square braces: [ ].	Within	each  section,
       each  line  defines  a  relation, which assigns tags to values, or to a
       subsection, which contains further relations or subsections.  An	 exam-
       ple  of	the  INI-style	format used by this configuration file follows
       below:

	    [section1]

		 tag1 = value_a

		 tag1 = value_b

		 tag2 = value_c

	    [section 2]

		 tag3 = {

		      subtag1 = subtag_value_a

		      subtag1 = subtag_value_b

		      subtag2 = subtag_value_c

		 }

		 tag1 = value_d

		 tag2 = value_e

	    }

       Comments are delimited by a semicolon (';') or a hash  ('#')  character
       at  the beginning of the comment, and are terminated by the end of line
       character.

       Tags and values must be quoted using  double  quotes  if	 they  contain
       spaces.	Within a quoted string, the standard backslash interpretations
       apply: "\n" (for the newline character), "\t" (for the tab  character),
       "\b" (for the backspace character), and "\\" (for the backslash charac-
       ter).

       The following stanzas are used in the mke2fs.conf file.	They  will  be
       described in more detail in future sections of this document.

       [defaults]
	      Contains	relations  which define the default parameters used by
	      mke2fs(8).  In general, these defaults may be  overridden	 by  a
	      definition  in the fs_types stanza, or by an command-line option
	      provided by the user.

       [fs_types]
	      Contains relations which define defaults that should be used for
	      specific filesystem types.  The filesystem type can be specified
	      explicitly using the -T option to mke2fs(8).  If	no  filesystem
	      type is specified, mke2fs(8) will use the filesystem type floppy
	      if the filesystem size is less than or equal to 3 megabytes.  If
	      the  filesystem size is greater than 3 but less than or equal to
	      512 megabytes, mke2fs(8) will use the filesystem small.	Other-
	      wise, mke2fs(8) will use the default filesystem type default.

THE [defaults] STANZA

       The following relations are defined in the [defaults] stanza.

       base_features

	      This  relation  specifies	 the  filesystems  features  which are
	      enabled in newly created filesystems.  It may be	overridden  by
	      the base_features relation found in the filesystem-type-specific
	      subsection of the [fs_types] stanza.

       default_features
	      This relation specifies a set of features that should  be	 added
	      or removed to the features listed in the base_features relation.
	      It may be overridden by the filesystem-specific default_features
	      in  the  filesystem-type subsection of [fs_types], and by the -O
	      command-line option to mke2fs(8).

       blocksize
	      This relation specifies the default blocksize if the  user  does
	      not specify a blocksize on the command line, and the filesystem-
	      type specific section of the configuration file does not specify
	      a blocksize.

       inode_ratio
	      This relation specifies the default inode ratio if the user does
	      not specify one on the command  line,  and  the  filesystem-type
	      specific	section	 of  the configuration file does not specify a
	      default inode ratio.

THE [fs_types] STANZA

       Each tag in the [fs_types] stanza names a filesystem type which can  be
       specified  via  the  -T option to mke2fs(8).  The value of the tag is a
       subsection where the relations in that subsection define	 the  defaults
       for that filesystem type. For example:

       [fs_types]

	    small = {

		 blocksize = 1024

		 inode_ratio = 4096

	    }

	    floppy = {

		 blocksize = 1024

	    }

       For  each  filesystem  type,  the  following  tags  may be used in that
       fs_type's subsection:

       base_features

	      This relation specifies the features which are enabled for  this
	      filesystem type.

       default_features

	      This  relation specifies set of features which should be enabled
	      or disabled to the features listed in  the  base_features	 rela-
	      tion.   It  may  be  overridden by the -O command-line option to
	      mke2fs(8).

       blocksize

	      This relation specifies the default blocksize if the  user  does
	      not specify a blocksize on the command line.

       inode_ratio

	      This relation specifies the default inode ratio if the user does
	      not specify one on the command line.

FILES
      /etc/mke2fs.conf      The configuration file for mke2fs(8).