深信服命令行
tcpdump -i vpntun host 10.50.0.200 and icmp -nn
tcpdump -i eth0 host 10.50.0.200 and icmp -nn
SG-6000# ll
SG-6000# show dp filter
SG-6000# show interface
SG-6000# debug dp filter dst-ip 172.16.25.2 proto icmp
assigned id: 1
SG-6000# show cpu de
SG-6000# debug dp ba
SG-6000[DBG]# debug dp dr
SG-6000[DBG]# debug dp snoop
SG-6000[DBG]# clear logging debug
SG-6000[DBG]# show logg debug
SG-6000[DBG]# show configuration interface ethernet0/1
SG-6000[DBG]# debug dp filter src-ip 172.16.25.2 proto icmp
SG-6000[DBG]# show dp filter
SG-6000[DBG]# clear logging debug
SG-6000[DBG]# show logg debug
SG-6000[DBG]# show logg debug | in
SG-6000[DBG]# show logg debug | include Packet
SG-6000[DBG]# show interface ethernet0/1
SG-6000[DBG]# undebug all
SG-6000# show logg debug
SG-6000# con
SG-6000(config)# ip vrouter trust-vr
SG-6000(config-vrouter)# ip route 0.0.0.0/0 172.16.25.1
SG-6000(config-vrouter)# ping 192.168.25.1
flow-statistics Port flow statistics
flowcontrol Set flowcontrol to interface
Switch(config-if-range)# channel-group ?
<1-55> Channel-group number
Switch(config-if-range)# channel-group ?
<1-55> Channel-group number
Switch(config-if-range)# channel-group 51 ?
mode Mode - channel mode commands
Switch(config-if-range)# channel-group 51 mode active
Switch(config-if-range)#
Switch(config-if-range)# do sh run int eth-0-45
Building configuration...
!
interface eth-0-45
channel-group 51 mode active
!
Switch(config-if-range)# port-?
Switch(config-if-range)# sw mo acc
% Cannot configure aggregator member
% Interface range command failed for eth-0-45, aborting
Switch(config)# int agg
Switch(config)# do sh ip int
Switch(config)# do sh int bri
Switch(config)# do sh int sum
Switch(config)# do sh run int agg51
Switch(config)# int agg51
Switch(config-if)# sw mo acc
Switch(config-if)# sw acc vlan 51
Switch(config-if)# no sh
Switch(config-if)# end
Switch# sh run
Switch# sh spanning-tree
Switch# sh ip route
Switch# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# ip route 0.0.0.0 0.0.0.0 10.51.0.1
Switch(config)# end
Switch# sh ip arp
Switch# sh ip int b
Switch# sh channel-group summary
Switch# sh channel-group 51 summary
Switch# sh channel-group 51 detail
Switch# sh int summary
Switch# sh ip int b
Switch# sh run int vlan 51
Switch# sh ip arp
Switch# copy run start
581
