java并发中CountDownLatch的使用

46 篇文章 1 订阅


java并发中CountDownLatch的使用

在java并发中,控制共享变量的访问非常重要,有时候我们也想控制并发线程的执行顺序,比如:等待所有线程都执行完毕之后再执行另外的线程,或者等所有线程都准备好了才开始所有线程的执行等。

这个时候我们就可以使用到CountDownLatch。

简单点讲,CountDownLatch存有一个放在QueuedSynchronizer中的计数器。当调用countdown() 方法时,该计数器将会减一。然后再调用await()来等待计数器归零。


private static final class Sync extends AbstractQueuedSynchronizer {
    ...
}

private final Sync sync;

    public void countDown() {
        sync.releaseShared(1);
    }
    public void await() throws InterruptedException {
        sync.acquireSharedInterruptibly(1);
    }

    public boolean await(long timeout, TimeUnit unit)
        throws InterruptedException {
        return sync.tryAcquireSharedNanos(1, unit.toNanos(timeout));
    }

下面我们举两个使用的例子:

主线程等待子线程全都结束之后再开始运行

这里我们定义子线程类,在子线程类里面,我们传入一个CountDownLatch用来计数,然后在子线程结束之前,调用该CountDownLatch的countDown方法。最后在主线程中调用await()方法来等待子线程结束执行。

@Slf4j
public class MainThreadWaitUsage implements Runnable {

    private List<String> outputScraper;
    private CountDownLatch countDownLatch;

    public MainThreadWaitUsage(List<String> outputScraper, CountDownLatch countDownLatch) {
        this.outputScraper = outputScraper;
        this.countDownLatch = countDownLatch;
    }

    @Override
    public void run() {
        outputScraper.add("Counted down");
        countDownLatch.countDown();
    }
}

看下怎么调用:

    @Test
    public void testCountDownLatch()
            throws InterruptedException {

        List<String> outputScraper = Collections.synchronizedList(new ArrayList<>());
        CountDownLatch countDownLatch = new CountDownLatch(5);
        List<Thread> workers = Stream
                .generate(() -> new Thread(new MainThreadWaitUsage(outputScraper, countDownLatch)))
                .limit(5)
                .collect(toList());

        workers.forEach(Thread::start);
        countDownLatch.await();
        outputScraper.add("Latch released");
        log.info(outputScraper.toString());

    }

执行结果如下:

07:37:27.388 [main] INFO MainThreadWaitUsageTest - [Counted down, Counted down, Counted down, Counted down, Counted down, Latch released]

等待所有线程都准备好再一起执行

上面的例子中,我们是主线程等待子线程,那么在这个例子中,我们将会看看怎么子线程一起等待到准备好的状态,再一起执行。

思路也很简单,在子线程开始之后,将等待的子线程计数器减一,在主线程中await该计数器,等计数器归零之后,主线程再通知子线程运行。

public class ThreadWaitThreadUsage implements Runnable {

    private List<String> outputScraper;
    private CountDownLatch readyThreadCounter;
    private CountDownLatch callingThreadBlocker;
    private CountDownLatch completedThreadCounter;

    public ThreadWaitThreadUsage(
            List<String> outputScraper,
            CountDownLatch readyThreadCounter,
            CountDownLatch callingThreadBlocker,
            CountDownLatch completedThreadCounter) {

        this.outputScraper = outputScraper;
        this.readyThreadCounter = readyThreadCounter;
        this.callingThreadBlocker = callingThreadBlocker;
        this.completedThreadCounter = completedThreadCounter;
    }

    @Override
    public void run() {
        readyThreadCounter.countDown();
        try {
            callingThreadBlocker.await();
            outputScraper.add("Counted down");
        } catch (InterruptedException e) {
            e.printStackTrace();
        } finally {
            completedThreadCounter.countDown();
        }
    }
}

看下怎么调用:

    @Test
    public void testCountDownLatch()
            throws InterruptedException {

        List<String> outputScraper = Collections.synchronizedList(new ArrayList<>());
        CountDownLatch readyThreadCounter = new CountDownLatch(5);
        CountDownLatch callingThreadBlocker = new CountDownLatch(1);
        CountDownLatch completedThreadCounter = new CountDownLatch(5);
        List<Thread> workers = Stream
                .generate(() -> new Thread(new ThreadWaitThreadUsage(
                        outputScraper, readyThreadCounter, callingThreadBlocker, completedThreadCounter)))
                .limit(5)
                .collect(toList());

        workers.forEach(Thread::start);
        readyThreadCounter.await();
        outputScraper.add("Workers ready");
        callingThreadBlocker.countDown();
        completedThreadCounter.await();
        outputScraper.add("Workers complete");

        log.info(outputScraper.toString());

    }

输出结果如下:

07:41:47.861 [main] INFO ThreadWaitThreadUsageTest - [Workers ready, Counted down, Counted down, Counted down, Counted down, Counted down, Workers complete]

停止CountdownLatch的await

如果我们调用await()方法,该方法将会等待一直到count=0才结束。但是如果在线程执行过程中出现了异常,可能导致countdown方法执行不了。那么await()方法可能会出现无限等待的情况。

这个时候我们可以使用:

    public boolean await(long timeout, TimeUnit unit)
        throws InterruptedException {
        return sync.tryAcquireSharedNanos(1, unit.toNanos(timeout));
    }

本文的例子可以参考https://github.com/ddean2009/learn-java-concurrency/tree/master/CountDownLatch

更多精彩内容且看:

更多教程请参考 flydean的博客

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

flydean程序那些事

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值