VMware 配置solaris连接网络

http://www.chinaunix.net 作者:Benajmin  发表于：2005-09-27 23:35:14

I find there are many guys don't know how to setup files to connected to internet and ask the same question again and again. So, I post my configuration file here for those who need reference for internet set up. Hopefully this can help some one a little.

OK, basicly there are 4 file you have to config at Solaris to go to internet:

1.  /etc/hosts or /etc/inet/hosts
2.  /etc/resolv.conf 
3. /etc/nsswitch.conf
4. /etc/defaultrouter

What i have to say is that the files  /etc/resolv.conf and  /etc/defaultrouter are not existed by default system installation. you have to create that 2 file when you need setup internet.

The following are my configuration file: (192.168.0.3 is my solaris 9 system and 192.168.0.1 is the machine of Windows 2000/XP which has 2 network interfice, one connected to internet by 24.101.186.193 and one connected to solaris9 by interfice 192.168.0.1. You have to choose to share internet for the interface that connected to internet at windows as you have)

Cat  /etc/hosts

127.0.0.1                     localhost
192.168.0.3                 lion            loghost
192.168.0.1                 router

---------------------------------------------

 vi   /etc/resolv.conf

nameserver       192.168.0.1

-----------------------------------------------
vi   /etc/nsswitch.conf

hosts:   files   dns

-----------------------------------------------

vi    /etc/defaultrouter

192.168.0.1

------------------------------------------------

 

最后，网卡进行重新启动。

无效 ifconfig hme1 down

有效 ifconfig hme1 up

其中hme1是网卡的名字。 使用ifconfig -a可以看到网卡的信息。

之后还是无法上网，但是可以ping通虚拟网关

手动加路由操作

route -p add default 192.168.0.1 -ifp net0

之后可以ping通外网