Prime Path(bfs+素数打表)

The ministers of the cabinet were quite upset by the message from the Chief of Security stating that they would all have to change the four-digit room numbers on their offices. 
— It is a matter of security to change such things every now and then, to keep the enemy in the dark. 
— But look, I have chosen my number 1033 for good reasons. I am the Prime minister, you know! 
— I know, so therefore your new number 8179 is also a prime. You will just have to paste four new digits over the four old ones on your office door. 
— No, it’s not that simple. Suppose that I change the first digit to an 8, then the number will read 8033 which is not a prime! 
— I see, being the prime minister you cannot stand having a non-prime number on your door even for a few seconds. 
— Correct! So I must invent a scheme for going from 1033 to 8179 by a path of prime numbers where only one digit is changed from one prime to the next prime. 

Now, the minister of finance, who had been eavesdropping, intervened. 
— No unnecessary expenditure, please! I happen to know that the price of a digit is one pound. 
— Hmm, in that case I need a computer program to minimize the cost. You don't know some very cheap software gurus, do you? 
— In fact, I do. You see, there is this programming contest going on... Help the prime minister to find the cheapest prime path between any two given four-digit primes! The first digit must be nonzero, of course. Here is a solution in the case above.

1033
1733
3733
3739
3779
8779
8179

The cost of this solution is 6 pounds. Note that the digit 1 which got pasted over in step 2 can not be reused in the last step – a new 1 must be purchased.

输入
 
 

One line with a positive number: the number of test cases (at most 100). Then for each test case, one line with two numbers separated by a blank. Both numbers are four-digit primes (without leading zeros).

输出
 
 

One line for each case, either with a number stating the minimal cost or containing the word Impossible.

样例输入
3
1033 8179
1373 8017
1033 1033
样例输出
6
7
0

问题很简单,就是问从startnum到endnum要变换多少次,每一次只能变一个位置上的数,并且变了之后的数一定要是素数和四位数。看了大神的直接打表bfs过就行了。

#include<iostream>
#include<algorithm>
#include<algorithm>
#include<cmath>
#include<string>
#include<cstdio>
#include<cstring>
#include<ctime>
#include<queue>
using namespace std;
#define INT_MAX 2147483647
#define ll long long int
int prime[] = {
	1009,1013,1019,1021,1031,1033,1039,1049,1051,1061,1063,1069,1087,1091,1093,1097,
	1103,1109,1117,1123,1129,1151,1153,1163,1171,1181,1187,1193,1201,1213,1217,1223,
	1229,1231,1237,1249,1259,1277,1279,1283,1289,1291,1297,1301,1303,1307,1319,1321,
	1327,1361,1367,1373,1381,1399,1409,1423,1427,1429,1433,1439,1447,1451,1453,1459,
	1471,1481,1483,1487,1489,1493,1499,1511,1523,1531,1543,1549,1553,1559,1567,1571,
	1579,1583,1597,1601,1607,1609,1613,1619,1621,1627,1637,1657,1663,1667,1669,1693,
	1697,1699,1709,1721,1723,1733,1741,1747,1753,1759,1777,1783,1787,1789,1801,1811,
	1823,1831,1847,1861,1867,1871,1873,1877,1879,1889,1901,1907,1913,1931,1933,1949,
	1951,1973,1979,1987,1993,1997,1999,2003,2011,2017,2027,2029,2039,2053,2063,2069,
	2081,2083,2087,2089,2099,2111,2113,2129,2131,2137,2141,2143,2153,2161,2179,2203,
	2207,2213,2221,2237,2239,2243,2251,2267,2269,2273,2281,2287,2293,2297,2309,2311,
	2333,2339,2341,2347,2351,2357,2371,2377,2381,2383,2389,2393,2399,2411,2417,2423,
	2437,2441,2447,2459,2467,2473,2477,2503,2521,2531,2539,2543,2549,2551,2557,2579,
	2591,2593,2609,2617,2621,2633,2647,2657,2659,2663,2671,2677,2683,2687,2689,2693,
	2699,2707,2711,2713,2719,2729,2731,2741,2749,2753,2767,2777,2789,2791,2797,2801,
	2803,2819,2833,2837,2843,2851,2857,2861,2879,2887,2897,2903,2909,2917,2927,2939,
	2953,2957,2963,2969,2971,2999,3001,3011,3019,3023,3037,3041,3049,3061,3067,3079,
	3083,3089,3109,3119,3121,3137,3163,3167,3169,3181,3187,3191,3203,3209,3217,3221,
	3229,3251,3253,3257,3259,3271,3299,3301,3307,3313,3319,3323,3329,3331,3343,3347,
	3359,3361,3371,3373,3389,3391,3407,3413,3433,3449,3457,3461,3463,3467,3469,3491,
	3499,3511,3517,3527,3529,3533,3539,3541,3547,3557,3559,3571,3581,3583,3593,3607,
	3613,3617,3623,3631,3637,3643,3659,3671,3673,3677,3691,3697,3701,3709,3719,3727,
	3733,3739,3761,3767,3769,3779,3793,3797,3803,3821,3823,3833,3847,3851,3853,3863,
	3877,3881,3889,3907,3911,3917,3919,3923,3929,3931,3943,3947,3967,3989,4001,4003,
	4007,4013,4019,4021,4027,4049,4051,4057,4073,4079,4091,4093,4099,4111,4127,4129,
	4133,4139,4153,4157,4159,4177,4201,4211,4217,4219,4229,4231,4241,4243,4253,4259,
	4261,4271,4273,4283,4289,4297,4327,4337,4339,4349,4357,4363,4373,4391,4397,4409,
	4421,4423,4441,4447,4451,4457,4463,4481,4483,4493,4507,4513,4517,4519,4523,4547,
	4549,4561,4567,4583,4591,4597,4603,4621,4637,4639,4643,4649,4651,4657,4663,4673,
	4679,4691,4703,4721,4723,4729,4733,4751,4759,4783,4787,4789,4793,4799,4801,4813,
	4817,4831,4861,4871,4877,4889,4903,4909,4919,4931,4933,4937,4943,4951,4957,4967,
	4969,4973,4987,4993,4999,5003,5009,5011,5021,5023,5039,5051,5059,5077,5081,5087,
	5099,5101,5107,5113,5119,5147,5153,5167,5171,5179,5189,5197,5209,5227,5231,5233,
	5237,5261,5273,5279,5281,5297,5303,5309,5323,5333,5347,5351,5381,5387,5393,5399,
	5407,5413,5417,5419,5431,5437,5441,5443,5449,5471,5477,5479,5483,5501,5503,5507,
	5519,5521,5527,5531,5557,5563,5569,5573,5581,5591,5623,5639,5641,5647,5651,5653,
	5657,5659,5669,5683,5689,5693,5701,5711,5717,5737,5741,5743,5749,5779,5783,5791,
	5801,5807,5813,5821,5827,5839,5843,5849,5851,5857,5861,5867,5869,5879,5881,5897,
	5903,5923,5927,5939,5953,5981,5987,6007,6011,6029,6037,6043,6047,6053,6067,6073,
	6079,6089,6091,6101,6113,6121,6131,6133,6143,6151,6163,6173,6197,6199,6203,6211,
	6217,6221,6229,6247,6257,6263,6269,6271,6277,6287,6299,6301,6311,6317,6323,6329,
	6337,6343,6353,6359,6361,6367,6373,6379,6389,6397,6421,6427,6449,6451,6469,6473,
	6481,6491,6521,6529,6547,6551,6553,6563,6569,6571,6577,6581,6599,6607,6619,6637,
	6653,6659,6661,6673,6679,6689,6691,6701,6703,6709,6719,6733,6737,6761,6763,6779,
	6781,6791,6793,6803,6823,6827,6829,6833,6841,6857,6863,6869,6871,6883,6899,6907,
	6911,6917,6947,6949,6959,6961,6967,6971,6977,6983,6991,6997,7001,7013,7019,7027,
	7039,7043,7057,7069,7079,7103,7109,7121,7127,7129,7151,7159,7177,7187,7193,7207,
	7211,7213,7219,7229,7237,7243,7247,7253,7283,7297,7307,7309,7321,7331,7333,7349,
	7351,7369,7393,7411,7417,7433,7451,7457,7459,7477,7481,7487,7489,7499,7507,7517,
	7523,7529,7537,7541,7547,7549,7559,7561,7573,7577,7583,7589,7591,7603,7607,7621,
	7639,7643,7649,7669,7673,7681,7687,7691,7699,7703,7717,7723,7727,7741,7753,7757,
	7759,7789,7793,7817,7823,7829,7841,7853,7867,7873,7877,7879,7883,7901,7907,7919,
	7927,7933,7937,7949,7951,7963,7993,8009,8011,8017,8039,8053,8059,8069,8081,8087,
	8089,8093,8101,8111,8117,8123,8147,8161,8167,8171,8179,8191,8209,8219,8221,8231,
	8233,8237,8243,8263,8269,8273,8287,8291,8293,8297,8311,8317,8329,8353,8363,8369,
	8377,8387,8389,8419,8423,8429,8431,8443,8447,8461,8467,8501,8513,8521,8527,8537,
	8539,8543,8563,8573,8581,8597,8599,8609,8623,8627,8629,8641,8647,8663,8669,8677,
	8681,8689,8693,8699,8707,8713,8719,8731,8737,8741,8747,8753,8761,8779,8783,8803,
	8807,8819,8821,8831,8837,8839,8849,8861,8863,8867,8887,8893,8923,8929,8933,8941,
	8951,8963,8969,8971,8999,9001,9007,9011,9013,9029,9041,9043,9049,9059,9067,9091,
	9103,9109,9127,9133,9137,9151,9157,9161,9173,9181,9187,9199,9203,9209,9221,9227,
	9239,9241,9257,9277,9281,9283,9293,9311,9319,9323,9337,9341,9343,9349,9371,9377,
	9391,9397,9403,9413,9419,9421,9431,9433,9437,9439,9461,9463,9467,9473,9479,9491,
	9497,9511,9521,9533,9539,9547,9551,9587,9601,9613,9619,9623,9629,9631,9643,9649,
	9661,9677,9679,9689,9697,9719,9721,9733,9739,9743,9749,9767,9769,9781,9787,9791,
	9803,9811,9817,9829,9833,9839,9851,9857,9859,9871,9883,9887,9901,9907,9923,9929,
	9931,9941,9949,9967,9973
};


struct node
{
	int x, step;
	node(int X, int S)
	{
		x = X;
		step = S;
	}
	node() {}
};

int su[10005];
int len = 1061;
int visit[10005];
node start_num, end_num;
int n;
void inti()
{
	memset(su, 0, sizeof(su));
	memset(visit, 0, sizeof(visit));
	for (int i = 0; i < 1061; i++)
	{
		su[prime[i]] = 1;
	}

}




void bfs()
{
	queue<node>q;
	node temp;
	q.push(start_num);
	inti();
	visit[start_num.x] = 1;
	while (!q.empty())
	{
		node a = q.front();

		q.pop();

		if (a.x == end_num.x)
		{
			cout << a.step << endl;
			break;
		}
		if (a.x == 8117)
		{
			int p=0;
		}

		for (int i = 1; i <= 9; i++)
		{
			int num = i * 1000 + (a.x - a.x / 1000 * 1000);
			if (visit[num] == 0 && su[num] == 1)
			{
				q.push(node(num, a.step + 1));
				//cout << num << " " << a.step + 1 << endl;
				visit[num] = 1;
			}
		}


		for (int i = 0; i <= 9; i++)
		{
			int num = a.x/1000*1000+i*100+(a.x%100);
			if (visit[num] == 0 && su[num] == 1)
			{
				q.push(node(num, a.step + 1));
				//cout << num << " " << a.step + 1 << endl;
				visit[num] = 1;
			}
		}


		for (int i = 0; i <= 9; i++)
		{
			int num =  a.x / 100 * 100 + (a.x % 10)+i*10;
			if (visit[num] == 0 && su[num] == 1)
			{
				q.push(node(num, a.step + 1));
				//cout << num << " " << a.step + 1 << endl;
				visit[num] = 1;
			}
		}


		for (int i = 0; i <= 9; i++)
		{
			int num = a.x / 10 * 10  + i ;
			if (visit[num] == 0 && su[num] == 1)
			{
				q.push(node(num, a.step + 1));
				//cout << num << " " << a.step + 1 << endl;
				visit[num] = 1;
			}
		}

	}

}

int main()
{

	
	scanf("%d", &n);
	while (n--)
	{
		
		scanf("%d %d", &start_num.x, &end_num.x);
		start_num.step = 0;

		bfs();
	}
	return 0;
}

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
洛谷p1238是一个题目,具体要求是给定一个迷宫,求从起点到终点的最短路径。这个问题可以使用链表来表示迷宫,并使用广度优先搜索算法来求解最短路径。 以下是一个示例代码,演示了如何使用链表和广度优先搜索算法来解决洛谷p1238题目中的迷宫问题: ```python from collections import deque # 定义迷宫的链表节点类 class Node: def __init__(self, x, y, val): self.x = x self.y = y self.val = val self.next = None # 构建迷宫的链表 def build_maze(maze): m = len(maze) n = len(maze[0]) head = Node(0, 0, maze[0][0]) curr = head for i in range(m): for j in range(n): if i == 0 and j == 0: continue node = Node(i, j, maze[i][j]) curr.next = node curr = node return head # 广度优先搜索算法求解最短路径 def bfs(maze): m = len(maze) n = len(maze[0]) visited = [[False] * n for _ in range(m)] queue = deque([(0, 0, 0)]) # (x, y, step) visited[0][0] = True while queue: x, y, step = queue.popleft() if x == m - 1 and y == n - 1: return step for dx, dy in [(1, 0), (-1, 0), (0, 1), (0, -1)]: nx, ny = x + dx, y + dy if 0 <= nx < m and 0 <= ny < n and not visited[nx][ny] and maze[nx][ny] == 0: queue.append((nx, ny, step + 1)) visited[nx][ny] = True return -1 # 示例迷宫 maze = [ [0, 1, 0, 0, 0], [0, 1, 0, 1, 0], [0, 0, 0, 0, 0], [0, 1, 1, 1, 0], [0, 0, 0, 1, 0] ] # 构建迷宫的链表 maze_head = build_maze(maze) # 使用广度优先搜索算法求解最短路径 shortest_path = bfs(maze) print("最短路径长度为:", shortest_path) ```

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值