文章目录
存储过程和函数
存储过程和函数是 事先经过编译并存储在数据库中的一段 SQL 语句的集合。
和视图不同,视图是虚拟表,通常不对底层数据表直接操作,而存储过程是程序化的 SQL,可以直接操作底层数据表。
存储过程和函数的区别在于函数必须有返回值,而存储过程没有。
有些公司对于大型项目要求使用存储过程,有些禁止使用。
优点:
- 一次编译多次使用,提升Sql的执行效率
- 减少开发工作量
- 安全性强
- 减少网络传输量
缺点:
- 可移植性差
- 调试困难
- 版本管理困难
- 不适合高并发场景
1.1.创建存储过程
CREATE PROCEDURE procedure_name ([proc_parameter[,...]])
begin
-- SQL语句
end ;
示例:
delimiter $
create procedure pro_test1()
begin
select 'Hello Mysql' ;
end$
delimiter ;
MySQL默认以";"为分隔符,如果没有声明分割符,则编译器会把存储过程当成SQL语句进行处理,因此编译过程会报错.
所以要事先用delimiter $
声明当前段分隔符。
delimiter ;
的意为把分隔符还原。
1.2 调用
call procedure_name() ;
1.3 查看存储过程
-- 查询db_name数据库中的所有的存储过程
select name from mysql.proc where db='db_name';
-- 查询存储过程的状态信息
show procedure status;
-- 查询某个存储过程的定义
show create procedure test.pro_test1 \G;
1.4 删除存储过程
DROP PROCEDURE [IF EXISTS] sp_name ;
1.5存储过程编程语法:
1.5.1 变量
- DECLARE:通过 DECLARE 可以定义一个局部变量,该变量的作用范围只能在 BEGIN…END 块中。
DECLARE var_name[,...] type [DEFAULT value]
delimiter $
create procedure pro_test2()
begin
declare num int default 5;
select num+ 10;
end$
delimiter ;
- SET
直接赋值使用 SET,可以赋常量或者赋表达式。
SET var_name = expr [, var_name = expr] ...
示例 :
DELIMITER $
CREATE PROCEDURE pro_test3()
BEGIN
DECLARE NAME VARCHAR(20);
SET NAME = 'MYSQL';
SELECT NAME ;
END$
DELIMITER ;
也可以通过select … into
DELIMITER $
CREATE PROCEDURE pro_test5()
BEGIN
declare countnum int;
select count(*) into countnum from city;
select countnum;
END$
DELIMITER ;
1.5.2 if条件判断
语法结构 :
if search_condition then statement_list
[elseif search_condition then statement_list] ...
[else statement_list]
end if;
根据定义的身高变量,判定当前身高的所属的身材类型
180 及以上 ----------> 身材高挑
170 - 180 ---------> 标准身材
170 以下 ----------> 一般身材
delimiter $
create procedure pro_test6()
begin
declare height int default 175;
declare description varchar(50);
if height >= 180 then
set description = '身材高挑';
elseif height >= 170 and height < 180 then
set description = '标准身材';
else
set description = '一般身材';
end if;
select description ;
end$
delimiter ;
1.5.3 传递参数
create procedure procedure_name([in/out/inout] 参数名 参数类型)
...
IN : 该参数可以作为输入,也就是需要调用方传入值 , 默认
OUT: 该参数作为输出,也就是该参数可以作为返回值
INOUT: 既可以作为输入参数,也可以作为输出参数
IN - 输入
根据定义的身高变量,判定当前身高的所属的身材类型:
delimiter $
create procedure pro_test5(in height int)
begin
declare description varchar(50) default '';
if height >= 180 then
set description='身材高挑';
elseif height >= 170 and height < 180 then
set description='标准身材';
else
set description='一般身材';
end if;
select concat('身高 ', height , '对应的身材类型为:',description);
end$
delimiter ;
OUT-输出
根据传入的身高变量,获取当前身高的所属的身材类型.
create procedure pro_test5(in height int , out description varchar(100))
begin
if height >= 180 then
set description='身材高挑';
elseif height >= 170 and height < 180 then
set description='标准身材';
else
set description='一般身材';
end if;
end$
call pro_test5(168, @description)$
select @description$
@description : 这种变量要在变量名称前面加上“@”符号,叫做用户会话变量,代表整个会话过程他都是有作用的,这个类似于全局变量一样。
@@global.sort_buffer_size : 这种在变量前加上 “@@” 符号, 叫做 系统变量
1.5.4 case结构
方式一 :
CASE case_value
WHEN when_value THEN statement_list
[WHEN when_value THEN statement_list] ...
[ELSE statement_list]
END CASE;
方式二 :
CASE
WHEN search_condition THEN statement_list
[WHEN search_condition THEN statement_list] ...
[ELSE statement_list]
END CASE;
给定一个月份, 然后计算出所在的季度:
delimiter $
create procedure pro_test9(month int)
begin
declare result varchar(20);
case
when month >= 1 and month <=3 then
set result = '第一季度';
when month >= 4 and month <=6 then
set result = '第二季度';
when month >= 7 and month <=9 then
set result = '第三季度';
when month >= 10 and month <=12 then
set result = '第四季度';
end case;
select concat('您输入的月份为 :', month , ' , 该月份为 : ' , result) as content ;
end$
delimiter ;
1.5.5 while循环
while search_condition do
statement_list
end while;
计算从1加到n的值:
delimiter $
create procedure pro_test8(n int)
begin
declare total int default 0;
declare num int default 1;
while num<=n do
set total = total + num;
set num = num + 1;
end while;
select total;
end$
delimiter ;
1.5.6 repeat结构
REPEAT
statement_list
UNTIL search_condition
END REPEAT;
计算从1加到n的值
delimiter $
create procedure pro_test10(n int)
begin
declare total int default 0;
repeat
set total = total + n;
set n = n - 1;
until n=0
end repeat;
select total ;
end$
delimiter ;
1.5.7 loop语句
LOOP 实现简单的循环,退出循环的条件需要使用其他的语句定义,通常可以使用 LEAVE 语句实现:
[begin_label:] LOOP
statement_list
END LOOP [end_label]
如果不在 statement_list 中增加退出循环的语句,那么 LOOP 语句可以用来实现简单的死循环。
1.5.8 leave语句
用来从标注的流程构造中退出,通常和 BEGIN … END 或者循环一起使用。下面是一个使用 LOOP 和 LEAVE 的简单例子 , 退出循环:
delimiter $
CREATE PROCEDURE pro_test11(n int)
BEGIN
declare total int default 0;
ins: LOOP
IF n <= 0 then
leave ins;
END IF;
set total = total + n;
set n = n - 1;
END LOOP ins;
select total;
END$
delimiter ;
1.5.9 游标/光标
游标是用来存储查询结果集的数据类型 , 在存储过程和函数中可以使用光标对结果集进行循环的处理。光标的使用包括光标的声明、OPEN、FETCH 和 CLOSE,其语法分别如下
声明光标:
DECLARE cursor_name CURSOR FOR select_statement ;
OPEN 光标:
OPEN cursor_name ;
FETCH 光标:
FETCH cursor_name INTO var_name [, var_name] ...
CLOSE 光标:
CLOSE cursor_name ;
使用示例:
1.初始化脚本:
create table emp(
id int(11) not null auto_increment ,
name varchar(50) not null comment '姓名',
age int(11) comment '年龄',
salary int(11) comment '薪水',
primary key(`id`)
)engine=innodb default charset=utf8 ;
insert into emp(id,name,age,salary) values(null,'金毛狮王',55,3800),(null,'白眉鹰
王',60,4000),(null,'青翼蝠王',38,2800),(null,'紫衫龙王',42,1800);
-- 查询emp表中数据, 并逐行获取进行展示
create procedure pro_test11()
begin
declare e_id int(11);
declare e_name varchar(50);
declare e_age int(11);
declare e_salary int(11);
declare emp_result cursor for select * from emp;
open emp_result;
fetch emp_result into e_id,e_name,e_age,e_salary;
select concat('id=',e_id , ', name=',e_name, ', age=', e_age, ', 薪资为:
',e_salary);
fetch emp_result into e_id,e_name,e_age,e_salary;
select concat('id=',e_id , ', name=',e_name, ', age=', e_age, ', 薪资为:
',e_salary);
fetch emp_result into e_id,e_name,e_age,e_salary;
select concat('id=',e_id , ', name=',e_name, ', age=', e_age, ', 薪资为:
',e_salary);
fetch emp_result into e_id,e_name,e_age,e_salary;
select concat('id=',e_id , ', name=',e_name, ', age=', e_age, ', 薪资为:
',e_salary);
fetch emp_result into e_id,e_name,e_age,e_salary;
select concat('id=',e_id , ', name=',e_name, ', age=', e_age, ', 薪资为:
',e_salary);
close emp_result;
end$
通过循环结构 , 获取游标中的数据:
DELIMITER $
create procedure pro_test12()
begin
DECLARE id int(11);
DECLARE name varchar(50);
DECLARE age int(11);
DECLARE salary int(11);
DECLARE has_data int default 1;
DECLARE emp_result CURSOR FOR select * from emp;
DECLARE EXIT HANDLER FOR NOT FOUND set has_data = 0;
open emp_result;
repeat
fetch emp_result into id , name , age , salary;
select concat('id为',id, ', name 为' ,name , ', age为 ' ,age , ', 薪水为: ',
salary);
until has_data = 0
end repeat;
close emp_result;
end$
DELIMITER ;
1.6 存储函数
CREATE FUNCTION function_name([param type ... ])
RETURNS type
BEGIN
...
END;
定义一个存储过程, 请求满足条件的总记录数 ;
delimiter $
create function count_city(countryId int)
returns int
begin
declare cnum int ;
select count(*) into cnum from city where country_id = countryId;
return cnum;
end$
delimiter ;
调用:
select count_city(1);
select count_city(2);