全志V5智能编码处理器详细参数介绍

全志V5智能编码处理器,支持双目摄像,并加入最新一代HawkView 5.0图像处理器与4K Smart H.265 视频编码器,进一步提高运动相机、安防监控应用场景的画质水平,帮助客户打造更具市场竞争力的智能创新产品。  

                                                                

V5芯片参数介绍:

处理器
Quad-Core Cortex A7@1.5GHz
Neon acceleration, integrated FPU

视频处理
H.264 BP/MP/HP,H.265 Main Profile 编码
I/P Frame,Smart P frame reference
MJPEG/JPEG baseline 编码
Real-time multi-stream H.264/H.265 编码 capability:-3840x2160@30fps+VGA@30fps+ 3840x2160@1fps snapshot
Maximum JPEG snapshot performance of 3840x2160@30fps
Maximum H265/H264/MJEPG 解码 performance of 3840x2160@30fps
CBR,VBR modes
Encoding of eight ROIs
支持 Frame Buffer Uncompression

智能视频分析
集成 AIE, supporting various intelligent analysis applications such as motion detection,perimeter defense,video diagnosis and face detection

音频接口
集成 audio CODEC supporting 20-bit audio inputs and outputs
I2S interface for connecting to an external audio CODEC
Dual-channel differential MIC inputs for reducing background noises

安全引擎
AES, DES, and 3DES encryption and decryption algorithms implemented by using hardware
RSA1024/2048/4096 signature verification algorithm implemented by using hardware
Hash-SHA1/256 and HMAC_SHA1/256 tamper proofing algorithms implemented by using hardware
集成 1.5Kbit Efuse storage space

视频处理
Two sensor input,Main input support 4xLane MIPI/12xLane Sub-LVDS/4xLane HiSPi interface,second input support 4xLane MIPI/8xLane Sub-LVDS/4xLane HiSPi interface
Compatibility with mainstream HD CMOS sensors provided by Sony, Aptina, OmniVision,and Panasonic
支持 BT.601, BT.656, or BT.1120 interface

输出
One PAL/NTSC output for automatic load detection
One BT.1120/BT.656 output interface
One MIPI DSI output,Maximum support 1080P60fps
One RGB/LVDS output

音频编码/解码
Voice 编码/解码 complying with multiple protocols by using software
Compliance with the G.711, G.726 and ADPCM protocols
Audio 3A functions (AEC, ANR, and ALC)

外设接口
POR,External reset input
Internal RTC,集成 4-channel ADC
Six UART interfaces,Eight PWM interfaces
One USB2.0 OTG,One USB2.0 Host
RGMII/RMII in 10/100 Mbit/s full-/half-duplex mode and1000Mbit/s full-duplex mode

图像信号处理
2-channel independent ISP processing,ISP1 Maximum support 4224x3168@30fps,ISP2 Maximum support 3264x2560@30fps
Adjustable 3A functions (AE, AWB, and AF)
Highlight compensation, backlight compensation,gamma correction, and color enhancement
Defect pixel correction, 2D/3D denoising
支持 Sensor Build-In WDR、2F - Frame base/Line base WDR、Local Tone mapping
支持 4-channel 1/64~1x scale output,include 2-channel support Frame Buffer compression
OSD overlaying of eight regions before 编码
Picture mirroring and flipping
ISP tuning tools for the PC

视频处理
Lens distortion correction and fisheye correction
Binocular stitching(360° panorama,180° wide angle)
Picture rotation by 90°or 270°

GPU
2-Channel Video layer,Maximum support 4K@30fps
2-Channel UI layer,Maximum support 1080P@30fps
2-Channel Video layer overlying 2-Channel UI layer
支持 Screen color enhance

外部存储器接口
DDR3/DDR3L/LPDDR3/ DDR2/LPDDR2 interface
- 32bit LPDDR3 with the maximum frequency of 667 MHz
- 32bit DDR3/DDR3L with the maximum frequency of 800 MHz
SPI NOR flash interface,Maximum capacity of 32 MB
- 1-/2-/4-wire mode
- 3-byte or 4-byte address mode
SPI NAND flash interface, maximum capacity of 512 MB
eMMC 5.0 interface, maximum capacity of 2 TB
NAND flash interface,Components with 8 GB or larger capacity
- 8-bit data width
- 4-/8-/24-/40-/64-/80-bit ECC
Booting from the SPI NOR flash, SPI NAND flash, or NAND flash

物理参数
Power consumption
- TBD
- Multi-level power saving mode
Operating voltages
- 0.9 V core voltage
- 3.3 V I/O voltage and 3.6 V margin voltage
- 1.5 V, or 1.2V DDR3/3L/LPDDR3 SDRAM interface voltage
Package
- RoHS,TFBGA
- Body size of 17mm x 17mm,Lead pitch of 0.65mm


软件开发工具包
Linux-4.4-based SDK

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
在 React Router v5 中,获取路由参数的方式会略有不同。你可以通过以下步骤在类组件中获取路由参数: 1. 首先,确保你已经正确配置了 React Router,并在应用的根组件中包裹了 `<Router>` 组件。这样才能使路由参数在整个应用中可用。 2. 在类组件中,你可以通过 `this.props.match.params` 来访问路由参数。`match` 对象中的 `params` 属性是一个包含路由参数的对象。 下面是一个示例: ```jsx import React from 'react'; import { BrowserRouter as Router, Route, Link } from 'react-router-dom'; class MyComponent extends React.Component { render() { const { id } = this.props.match.params; // 获取名为 "id" 的路由参数 return ( <div> <h1>My Component</h1> <p>路由参数: {id}</p> </div> ); } } class App extends React.Component { render() { return ( <Router> <div> <h1>App</h1> <ul> <li> <Link to="/component/1">组件 1</Link> </li> <li> <Link to="/component/2">组件 2</Link> </li> </ul> <Route path="/component/:id" component={MyComponent} /> </div> </Router> ); } } export default App; ``` 在上面的示例中,我们定义了一个 `MyComponent` 类组件,它通过 `this.props.match.params` 获取名为 "id" 的路由参数。然后,我们在 `App` 组件中使用 `<Route>` 组件来将 `MyComponent` 组件与 `/component/:id` 路径匹配。 通过这种方式,当访问 `/component/1` 或 `/component/2` 路径时,`MyComponent` 组件会被渲染,并可以获取到对应的路由参数。 请注意,上述示例是使用了 React Router v5 的方式获取路由参数。如果你正在使用 React Router v6,请参考之前我提供的关于 v6 的回答。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值