USB鼠标实现——设置配置和获取配置(六)

设置配置和获取配置

仓库地址

仓库地址

USB 鼠标阅读顺序

set configurationget configuration

主机在获取完 device qualifier 后,又单独获取了几次设备描述符和配置描述符等,描述符的返回这里不再赘述。

在这里插入图片描述

标准设备请求中有 set configurationget configuration

只有在收到非 0 的配置值之后才可以使能非 0 端点,否则要禁用非 0 端点

设置配置

bRequest 域为 0x09

USB 控制端点收到的数据

0x0 0x9 0x1 0x0 0x0 0x0 0x0 0x0
  • bmRequestType:0x00
    • 数据传输方向为 0,host-to-device
    • 标准请求
    • 请求的接收者为设备
  • bRequest:0x09
    • SET_CONFIGURATION 设置配置请求。
  • wValue:0x0001(LSB)
    • 低位:0x01 配置值低位为 0x01。
    • 高位:0x00 配置值高位为 0x00。
  • wIndex:0x0000(LSB)
    • 低位:0x00
    • 高位:0x00
  • wLength:0x00
    • 低位:0x00
    • 高位:0x00

无数据阶段

获取配置

bRequest 域为 0x08

USB 控制端点收到的数据

0x0 0x8 0x0 0x0 0x0 0x0 0x1 0x0
  • bmRequestType:0x00
    • 数据传输方向为 0,host-to-device
    • 标准请求
    • 请求的接收者为设备
  • bRequest:0x08
    • GET_CONFIGURATION 获取配置请求。
  • wValue:0x0000(LSB)
    • 低位:0x00
    • 高位:0x00
  • wIndex:0x0000(LSB)
    • 低位:0x00
    • 高位:0x00
  • wLength:0x01
    • 低位:0x01 数据长度为 1 个字节
    • 高位:0x00

在数据阶段返回 1 字节的 set configuration 设置的值即可

注意事项

  • 虽然枚举阶段可能没有用到 get configuration,但是在过 USB 认证的时候 CV test 会调用 set/get configuration 。所以最好还是实现这一对请求,不然后续会返回来查找 bug 。
  • 只有在收到非 0 的配置值之后才可以使能非 0 端点,否则要禁用非 0 端点。

附 STM32 枚举日志

HID 鼠标枚举日志如下

suspend int
bus reset int
enum done int
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x0 0x1 0x0 0x0 0x40 0x0 
dcd xfer
input ep int 
d->h :0x12 0x1 0x0 0x2 0x0 0x0 0x0 0x40 0xfe 0xca 0x8 0x40 0x0 0x1 0x1 0x2 0x3 0x1 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
bus reset int
output ep int 
send xfer complete event
enum done int
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x0 0x5 0x5 0x0 0x0 0x0 0x0 0x0 
dcd xfer
input ep int 
edpt int send xfer complete event
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x0 0x1 0x0 0x0 0x12 0x0 
dcd xfer
input ep int 
d->h :0x12 0x1 0x0 0x2 0x0 0x0 0x0 0x40 0xfe 0xca 0x8 0x40 0x0 0x1 0x1 0x2 0x3 0x1 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
output ep int 
send xfer complete event
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x0 0x2 0x0 0x0 0xff 0x0 
dcd xfer
input ep int 
d->h :0x9 0x2 0x22 0x0 0x1 0x1 0x0 0xa0 0x32 0x9 0x4 0x0 0x0 0x1 0x3 0x1 0x2 0x0 0x9 0x21 0x11 0x1 0x0 0x1 0x22 0x4d 0x0 0x7 0x5 0x81 0x3 0x8 0x0 0xa 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x3 0x3 0x9 0x4 0xff 0x0 
send xfer complete event
dcd xfer
input ep int 
d->h :0xe 0x3 0x31 0x0 0x32 0x0 0x33 0x0 0x34 0x0 0x35 0x0 0x36 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x0 0x3 0x0 0x0 0xff 0x0 
send xfer complete event
dcd xfer
input ep int 
d->h :0x4 0x3 0x9 0x4 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x2 0x3 0x9 0x4 0xff 0x0 
send xfer complete event
dcd xfer
input ep int 
d->h :0x1e 0x3 0x74 0x0 0x79 0x0 0x75 0x0 0x73 0x0 0x74 0x0 0x6c 0x0 0x69 0x0 0x20 0x0 0x44 0x0 0x65 0x0 0x76 0x0 0x69 0x0 0x63 0x0 0x65 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x0 0x6 0x0 0x0 0xa 0x0 
send xfer complete event
get device qualifier
stall ep0
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x0 0x1 0x0 0x0 0x12 0x0 
dcd xfer
input ep int 
d->h :0x12 0x1 0x0 0x2 0x0 0x0 0x0 0x40 0xfe 0xca 0x8 0x40 0x0 0x1 0x1 0x2 0x3 0x1 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x0 0x2 0x0 0x0 0x9 0x0 
send xfer complete event
dcd xfer
input ep int 
d->h :0x9 0x2 0x22 0x0 0x1 0x1 0x0 0xa0 0x32 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x0 0x2 0x0 0x0 0x22 0x0 
send xfer complete event
dcd xfer
input ep int 
d->h :0x9 0x2 0x22 0x0 0x1 0x1 0x0 0xa0 0x32 0x9 0x4 0x0 0x0 0x1 0x3 0x1 0x2 0x0 0x9 0x21 0x11 0x1 0x0 0x1 0x22 0x4d 0x0 0x7 0x5 0x81 0x3 0x8 0x0 0xa 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x0 0x9 0x1 0x0 0x0 0x0 0x0 0x0 
send xfer complete event
edpt open
dcd xfer
input ep int 
edpt int send xfer complete event
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x21 0xa 0x0 0x0 0x0 0x0 0x0 0x0 
dcd xfer
input ep int 
edpt int send xfer complete event
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x81 0x6 0x0 0x22 0x0 0x0 0x8d 0x0 
dcd xfer
input ep int 
d->h :0x5 0x1 0x9 0x2 0xa1 0x1 0x9 0x1 0xa1 0x0 0x5 0x9 0x19 0x1 0x29 0x5 0x15 0x0 0x25 0x1 0x95 0x5 0x75 0x1 0x81 0x2 0x95 0x1 0x75 0x3 0x81 0x1 0x5 0x1 0x9 0x30 0x9 0x31 0x15 0x81 0x25 0x7f 0x95 0x2 0x75 0x8 0x81 0x6 0x9 0x38 0x15 0x81 0x25 0x7f 0x95 0x1 0x75 0x8 0x81 0x6 0x5 0xc 0xa 0x38 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
input ep int 
d->h :0x2 0x15 0x81 0x25 0x7f 0x95 0x1 0x75 0x8 0x81 0x6 0xc0 0xc0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
output ep int 
send xfer complete event
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x0 0x3 0x0 0x0 0xff 0x0 
dcd xfer
input ep int 
d->h :0x4 0x3 0x9 0x4 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x0 0x3 0x0 0x0 0xff 0x0 
send xfer complete event
dcd xfer
input ep int 
d->h :0x4 0x3 0x9 0x4 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x1 0x3 0x9 0x4 0xff 0x0 
send xfer complete event
dcd xfer
input ep int 
d->h :0x10 0x3 0x74 0x0 0x79 0x0 0x75 0x0 0x73 0x0 0x74 0x0 0x6c 0x0 0x69 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x1 0x3 0x9 0x4 0xff 0x0 
send xfer complete event
dcd xfer
input ep int 
d->h :0x10 0x3 0x74 0x0 0x79 0x0 0x75 0x0 0x73 0x0 0x74 0x0 0x6c 0x0 0x69 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x2 0x3 0x9 0x4 0xff 0x0 
send xfer complete event
dcd xfer
input ep int 
d->h :0x1e 0x3 0x74 0x0 0x79 0x0 0x75 0x0 0x73 0x0 0x74 0x0 0x6c 0x0 0x69 0x0 0x20 0x0 0x44 0x0 0x65 0x0 0x76 0x0 0x69 0x0 0x63 0x0 0x65 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
setup packed recvd
setup packed done
output ep int 
h->d: 0x80 0x6 0x2 0x3 0x9 0x4 0xff 0x0 
send xfer complete event
dcd xfer
input ep int 
d->h :0x1e 0x3 0x74 0x0 0x79 0x0 0x75 0x0 0x73 0x0 0x74 0x0 0x6c 0x0 0x69 0x0 0x20 0x0 0x44 0x0 0x65 0x0 0x76 0x0 0x69 0x0 0x63 0x0 0x65 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
rxflvl int
output ep int 
send xfer complete event
dcd xfer
0x0 0x5 0x5 0x0 0x0 
input ep int 
d->h :0x0 0x5 0x5 0x0 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
0x0 0x5 0x5 0x0 0x0 
input ep int 
d->h :0x0 0x5 0x5 0x0 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
0x0 0x5 0x5 0x0 0x0 
input ep int 
d->h :0x0 0x5 0x5 0x0 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
0x0 0x5 0x5 0x0 0x0 
input ep int 
d->h :0x0 0x5 0x5 0x0 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
0x0 0x5 0x5 0x0 0x0 
input ep int 
d->h :0x0 0x5 0x5 0x0 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
0x0 0x5 0x5 0x0 0x0 
input ep int 
d->h :0x0 0x5 0x5 0x0 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
0x0 0x5 0x5 0x0 0x0 
input ep int 
d->h :0x0 0x5 0x5 0x0 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
0x0 0x5 0x5 0x0 0x0 
input ep int 
d->h :0x0 0x5 0x5 0x0 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
0x0 0x5 0x5 0x0 0x0 
input ep int 
d->h :0x0 0x5 0x5 0x0 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
dcd xfer
0x0 0x5 0x5 0x0 0x0 
input ep int 
d->h :0x0 0x5 0x5 0x0 0x0 
turn off txfe
input ep int 
edpt int send xfer complete event
  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值