CentOS 使用二进制部署 Kubernetes 1.13集群

最新推荐文章于 2021-06-23 09:49:39 发布
最新推荐文章于 2021-06-23 09:49:39 发布
阅读量868 收藏 1
点赞数

参考：https://www.kubernetes.org.cn/4963.html部份错误已更改

 

 

1、安装环境准备：

部署节点说明

IP地址	         主机名      	CPU	内存	磁盘
192.168.136.150	master	4C	4G	50G
192.168.136.151	node1	4C	4G	50G
192.168.136.152	node2	4C	4G	50G

k8s安装包下载

链接：https://pan.baidu.com/s/1wO6T7byhaJYBuu2JlhZvkQ
提取码：pm9u

部署网络说明 2、架构图 Kubernetes 架构图

Flannel网络架构图

数据从源容器中发出后，经由所在主机的docker0虚拟网卡转发到flannel0虚拟网卡，这是个P2P的虚拟网卡，flanneld服务监听在网卡的另外一端。 Flannel通过Etcd服务维护了一张节点间的路由表，在稍后的配置部分我们会介绍其中的内容。 源主机的flanneld服务将原本的数据内容UDP封装后根据自己的路由表投递给目的节点的flanneld服务，数据到达以后被解包，然后直接进入目的节点的flannel0虚拟网卡， 然后被转发到目的主机的docker0虚拟网卡，最后就像本机容器通信一下的有docker0路由到达目标容器。

3、 Kubernetes工作流程

集群功能各模块功能描述：

Master节点：

Master节点上面主要由四个模块组成，APIServer，schedule,controller-manager,etcd

APIServer: APIServer负责对外提供RESTful的kubernetes API的服务，它是系统管理指令的统一接口，任何对资源的增删该查都要交给APIServer处理后再交给etcd，如图，kubectl(kubernetes提供的客户端工具，该工具内部是对kubernetes API的调用）是直接和APIServer交互的。

schedule: schedule负责调度Pod到合适的Node上，如果把scheduler看成一个黑匣子，那么它的输入是pod和由多个Node组成的列表，输出是Pod和一个Node的绑定。 kubernetes目前提供了调度算法，同样也保留了接口。用户根据自己的需求定义自己的调度算法。

controller manager: 如果APIServer做的是前台的工作的话，那么controller manager就是负责后台的。每一个资源都对应一个控制器。而control manager就是负责管理这些控制器的，比如我们通过APIServer创建了一个Pod，当这个Pod创建成功后，APIServer的任务就算完成了。

etcd：etcd是一个高可用的键值存储系统，kubernetes使用它来存储各个资源的状态，从而实现了Restful的API。

Node节点：

每个Node节点主要由三个模板组成：kublet, kube-proxy

kube-proxy: 该模块实现了kubernetes中的服务发现和反向代理功能。kube-proxy支持TCP和UDP连接转发，默认基Round Robin算法将客户端流量转发到与service对应的一组后端pod。服务发现方面，kube-proxy使用etcd的watch机制监控集群中service和endpoint对象数据的动态变化，并且维护一个service到endpoint的映射关系，从而保证了后端pod的IP变化不会对访问者造成影响，另外，kube-proxy还支持session affinity。

kublet：kublet是Master在每个Node节点上面的agent，是Node节点上面最重要的模块，它负责维护和管理该Node上的所有容器，但是如果容器不是通过kubernetes创建的，它并不会管理。本质上，它负责使Pod的运行状态与期望的状态一致。

二、Kubernetes 安装及配置

1、初始化环境

1.1、设置关闭防火墙及SELINUX

systemctl stop firewalld && systemctl disable firewalld
setenforce 0
vi /etc/selinux/config
SELINUX=disabled

1.2、关闭Swap

swapoff -a && sysctl -w vm.swappiness=0
vi /etc/fstab
#UUID=7bff6243-324c-4587-b550-55dc34018ebf swap                    swap    defaults        0 0

1.3、设置Docker所需参数

cat << EOF | tee /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl -p /etc/sysctl.d/k8s.conf

1.4、安装 Docker

yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
yum list docker-ce --showduplicates | sort -r
yum install docker-ce -y
systemctl start docker && systemctl enable docker

1.5、创建安装目录

mkdir /k8s/etcd/{bin,cfg,ssl} -p
mkdir /k8s/kubernetes/{bin,cfg,ssl} -p

1.6、安装及配置CFSSL

wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
chmod +x cfssl_linux-amd64 cfssljson_linux-amd64 cfssl-certinfo_linux-amd64
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
mv cfssl-certinfo_linux-amd64 /usr/bin/cfssl-certinfo

cp cfssl_linux-amd64 /usr/local/bin/cfssl
cp cfssljson_linux-amd64 /usr/local/bin/cfssljson
cp cfssl-certinfo_linux-amd64 /usr/bin/cfssl-certinfo

1.7、创建认证证书

创建 ETCD 证书

cat << EOF | tee ca-config.json
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "www": {
         "expiry": "87600h",
         "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ]
      }
    }
  }
}
EOF

创建 ETCD CA 配置文件

cat << EOF | tee ca-csr.json
{
    "CN": "etcd CA",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Shenzhen",
            "ST": "Shenzhen"
        }
    ]
}
EOF

创建 ETCD Server 证书

cat << EOF | tee server-csr.json
{
    "CN": "etcd",
    "hosts": [
    "192.168.136.150",
    "192.168.136.151",
    "192.168.136.152"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Shenzhen",
            "ST": "Shenzhen"
        }
    ]
}
EOF

生成 ETCD CA 证书和私钥

cfssl gencert -initca ca-csr.json | cfssljson -bare ca -
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=www server-csr.json | cfssljson -bare server

创建 Kubernetes CA 证书

cat << EOF | tee ca-config.json
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
         "expiry": "87600h",
         "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ]
      }
    }
  }
}
EOF
cat << EOF | tee ca-csr.json
{
    "CN": "kubernetes",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Shenzhen",
            "ST": "Shenzhen",
            "O": "k8s",
            "OU": "System"
        }
    ]
}
EOF
cfssl gencert -initca ca-csr.json | cfssljson -bare ca -

生成API_SERVER证书

cat << EOF | tee server-csr.json
{
    "CN": "kubernetes",
    "hosts": [
      "10.0.0.1",
      "127.0.0.1",
      "192.168.136.150",
      "kubernetes",
      "kubernetes.default",
      "kubernetes.default.svc",
      "kubernetes.default.svc.cluster",
      "kubernetes.default.svc.cluster.local"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "L": "Shenzhen",
            "ST": "Shenzhen",
            "O": "k8s",
            "OU": "System"
        }
    ]
}
EOF
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes server-csr.json | cfssljson -bare server

创建 Kubernetes Proxy 证书

cat << EOF | tee kube-proxy-csr.json
{
  "CN": "system:kube-proxy",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "L": "Shenzhen",
      "ST": "Shenzhen",
      "O": "k8s",
      "OU": "System"
    }
  ]
}
EOF
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy

1.8、 ssh-key认证

# ssh-keygen 
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa): 
Created directory '/root/.ssh'.
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:FQjjiRDp8IKGT+UDM+GbQLBzF3DqDJ+pKnMIcHGyO/o root@master
The key's randomart image is:
+---[RSA 2048]----+
|o.==o o. ..      |
|ooB+o+ o.  .     |
|B++@o o   .      |
|=X**o    .       |
|o=O. .  S        |
|..+              |
|oo .             |
|* .              |
|o+E              |
+----[SHA256]-----+

# ssh-copy-id 192.168.136.151
# ssh-copy-id 192.168.136.152

2 、部署ETCD

解压安装文件

tar -xvf etcd-v3.3.10-linux-amd64.tar.gz
cd etcd-v3.3.10-linux-amd64/
cp etcd etcdctl /k8s/etcd/bin/
vim /k8s/etcd/cfg/etcd   
#[Member]
ETCD_NAME="etcd01"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.136.150:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.136.150:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.136.150:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.136.150:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.136.150:2380,etcd02=https://192.168.136.151:2380,etcd03=https://192.168.136.152:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

创建 etcd的 systemd unit 文件

vim /usr/lib/systemd/system/etcd.service 
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/k8s/etcd/cfg/etcd
ExecStart=/k8s/etcd/bin/etcd \
--name=${ETCD_NAME} \
--data-dir=${ETCD_DATA_DIR} \
--listen-peer-urls=${ETCD_LISTEN_PEER_URLS} \
--listen-client-urls=${ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 \
--advertise-client-urls=${ETCD_ADVERTISE_CLIENT_URLS} \
--initial-advertise-peer-urls=${ETCD_INITIAL_ADVERTISE_PEER_URLS} \
--initial-cluster=${ETCD_INITIAL_CLUSTER} \
--initial-cluster-token=${ETCD_INITIAL_CLUSTER_TOKEN} \
--initial-cluster-state=new \
--cert-file=/k8s/etcd/ssl/server.pem \
--key-file=/k8s/etcd/ssl/server-key.pem \
--peer-cert-file=/k8s/etcd/ssl/server.pem \
--peer-key-file=/k8s/etcd/ssl/server-key.pem \
--trusted-ca-file=/k8s/etcd/ssl/ca.pem \
--peer-trusted-ca-file=/k8s/etcd/ssl/ca.pem
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

拷贝证书文件(注意etcd /k8s/kubelet的文件会有覆盖，需要分开运行，然后复制。证书之间会同名，产才覆盖，要避免，否则通不过)

cp ca*pem server*pem /k8s/etcd/ssl

启动ETCD服务

systemctl daemon-reload
systemctl enable etcd
systemctl start etcd

将启动文件、配置文件拷贝到 节点1、节点2

cd /k8s/ 
scp -r etcd 192.168.136.151:/k8s/
scp -r etcd 192.168.136.152:/k8s/
scp /usr/lib/systemd/system/etcd.service  192.168.136.151:/usr/lib/systemd/system/etcd.service
scp /usr/lib/systemd/system/etcd.service  192.168.136.152:/usr/lib/systemd/system/etcd.service
vim /k8s/etcd/cfg/etcd 
#[Member]
ETCD_NAME="etcd02"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.136.151:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.136.151:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.136.151:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.136.151:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.136.150:2380,etcd02=https://192.168.136.151:2380,etcd03=https://192.168.136.152:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

vim /k8s/etcd/cfg/etcd

#[Member]
ETCD_NAME="etcd03"
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.136.152:2380"
ETCD_LISTEN_CLIENT_URLS="https://192.168.136.152:2379"

#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.136.152:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.136.152:2379"
ETCD_INITIAL_CLUSTER="etcd01=https://192.168.136.150:2380,etcd02=https://192.168.136.151:2380,etcd03=https://192.168.136.152:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"

验证集群是否正常运行

./etcdctl \
--ca-file=/k8s/etcd/ssl/ca.pem \
--cert-file=/k8s/etcd/ssl/server.pem \
--key-file=/k8s/etcd/ssl/server-key.pem \
--endpoints="https://192.168.136.150:2379,\
https://192.168.136.151:2379,\
https://192.168.136.152:2379" cluster-health

member 5db3ea816863435 is healthy: got healthy result from https://192.168.136.152:2379
member 991b5845cecb31b is healthy: got healthy result from https://192.168.136.151:2379
member c67ee2780d64a0d4 is healthy: got healthy result from https://192.168.136.150:2379
cluster is healthy

注意： 启动ETCD集群同时启动二个节点，启动一个节点集群是无法正常启动的；

3、部署Flannel网络

向 etcd 写入集群 Pod 网段信息

cd /k8s/etcd/ssl/
/k8s/etcd/bin/etcdctl \
--ca-file=ca.pem --cert-file=server.pem \
--key-file=server-key.pem \
--endpoints="https://192.168.136.150:2379,\
https://192.168.136.151:2379,https://192.168.136.152:2379" \
set /coreos.com/network/config  '{ "Network": "172.18.0.0/16", "Backend": {"Type": "vxlan"}}'

flanneld 当前版本 (v0.10.0) 不支持 etcd v3，故使用 etcd v2 API 写入配置 key 和网段数据； 写入的 Pod 网段 ${CLUSTER_CIDR} 必须是 /16 段地址，必须与 kube-controller-manager 的 –cluster-cidr 参数值一致；

解压安装

tar -xvf flannel-v0.10.0-linux-amd64.tar.gz
mv flanneld mk-docker-opts.sh /k8s/kubernetes/bin/

配置Flannel

vim /k8s/kubernetes/cfg/flanneld
FLANNEL_OPTIONS="--etcd-endpoints=https://192.168.136.150:2379,https://192.168.136.151:2379,https://192.168.136.152:2379 -etcd-cafile=/k8s/etcd/ssl/ca.pem -etcd-certfile=/k8s/etcd/ssl/server.pem -etcd-keyfile=/k8s/etcd/ssl/server-key.pem"

创建 flanneld 的 systemd unit 文件

vim /usr/lib/systemd/system/flanneld.service
[Unit]
Description=Flanneld overlay address etcd agent
After=network-online.target network.target
Before=docker.service

[Service]
Type=notify
EnvironmentFile=/k8s/kubernetes/cfg/flanneld
ExecStart=/k8s/kubernetes/bin/flanneld --ip-masq $FLANNEL_OPTIONS
ExecStartPost=/k8s/kubernetes/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/subnet.env
Restart=on-failure

[Install]
WantedBy=multi-user.target

mk-docker-opts.sh 脚本将分配给 flanneld 的 Pod 子网网段信息写入 /run/flannel/docker 文件，后续 docker 启动时 使用这个文件中的环境变量配置 docker0 网桥； flanneld 使用系统缺省路由所在的接口与其它节点通信，对于有多个网络接口（如内网和公网）的节点，可以用 -iface 参数指定通信接口，如上面的 eth0 接口; flanneld 运行时需要 root 权限；

配置Docker启动指定子网段

vim /usr/lib/systemd/system/docker.service 
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
After=network-online.target firewalld.service
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/run/flannel/subnet.env
ExecStart=/usr/bin/dockerd $DOCKER_NETWORK_OPTIONS
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TimeoutStartSec=0
Delegate=yes
KillMode=process
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s

[Install]
WantedBy=multi-user.target

配置Docker启动指定子网段

vim /usr/lib/systemd/system/docker.service 

[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
BindsTo=containerd.service
After=network-online.target firewalld.service
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/run/flannel/subnet.env
ExecStart=/usr/bin/dockerd $DOCKER_NETWORK_OPTIONS
ExecReload=/bin/kill -s HUP $MAINPID
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
TimeoutStartSec=0
Delegate=yes
KillMode=process
Restart=on-failure
StartLimitBurst=3
StartLimitInterval=60s

[Install]
WantedBy=multi-user.target

将flanneld systemd unit 文件到所有节点

cd /k8s/
scp -r kubernetes 192.168.136.151:/k8s/
scp -r kubernetes 192.168.136.152:/k8s/
scp /k8s/kubernetes/cfg/flanneld 192.168.136.152:/k8s/kubernetes/cfg/flanneld
scp /k8s/kubernetes/cfg/flanneld 192.168.136.152:/k8s/kubernetes/cfg/flanneld
scp /usr/lib/systemd/system/docker.service  192.168.136.151:/usr/lib/systemd/system/docker.service 
scp /usr/lib/systemd/system/docker.service  192.168.136.152:/usr/lib/systemd/system/docker.service
scp /usr/lib/systemd/system/flanneld.service  192.168.136.151:/usr/lib/systemd/system/flanneld.service 
scp /usr/lib/systemd/system/flanneld.service  192.168.136.152:/usr/lib/systemd/system/flanneld.service

启动服务

systemctl daemon-reload
systemctl start flanneld
systemctl enable flanneld
systemctl restart docker

查看是否生效

ip add
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 08:00:27:e3:57:a4 brd ff:ff:ff:ff:ff:ff
    inet 192.168.136.151/24 brd 172.16.8.255 scope global noprefixroute eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::a00:27ff:fee3:57a4/64 scope link 
       valid_lft forever preferred_lft forever
3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default 
    link/ether 02:42:cf:5d:a7:af brd ff:ff:ff:ff:ff:ff
    inet 172.18.25.1/24 brd 172.18.25.255 scope global docker0
       valid_lft forever preferred_lft forever
4: flannel.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN group default 
    link/ether 0e:bf:c5:3b:4d:59 brd ff:ff:ff:ff:ff:ff
    inet 172.18.25.0/32 scope global flannel.1
       valid_lft forever preferred_lft forever
    inet6 fe80::cbf:c5ff:fe3b:4d59/64 scope link 
       valid_lft forever preferred_lft forever

4、部署 master 节点

kubernetes master 节点运行如下组件：

kube-apiserver
kube-scheduler
kube-controller-manager
kube-scheduler 和 kube-controller-manager

可以以集群模式运行，通过 leader 选举产生一个工作进程，其它进程处于阻塞模式。

将二进制文件解压拷贝到master 节点

tar -xvf kubernetes-server-linux-amd64.tar.gz 
cd kubernetes/server/bin/
cp kube-scheduler kube-apiserver kube-controller-manager kubectl /k8s/kubernetes/bin/

拷贝认证

cp *pem /k8s/kubernetes/ssl/

部署 kube-apiserver 组件

创建 TLS Bootstrapping Token

head -c 16 /dev/urandom | od -An -t x | tr -d ' '
8d1d67884006ea8494cbc42a1b67715b
vim /k8s/kubernetes/cfg/token.csv
8d1d67884006ea8494cbc42a1b67715b,kubelet-bootstrap,10001,"system:kubelet-bootstrap"

创建apiserver配置文件

vim /k8s/kubernetes/cfg/kube-apiserver 
KUBE_APISERVER_OPTS="--logtostderr=true \
--v=4 \
--etcd-servers=https://192.168.136.150:2379,https://192.168.136.151:2379,https://192.168.136.152:2379 \
--bind-address=192.168.136.150 \
--secure-port=6443 \
--advertise-address=192.168.136.150 \
--allow-privileged=true \
--service-cluster-ip-range=10.0.0.0/24 \
--enable-admission-plugins=NamespaceLifecycle,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota,NodeRestriction \
--authorization-mode=RBAC,Node \
--enable-bootstrap-token-auth \
--token-auth-file=/k8s/kubernetes/cfg/token.csv \
--service-node-port-range=30000-50000 \
--tls-cert-file=/k8s/kubernetes/ssl/server.pem  \
--tls-private-key-file=/k8s/kubernetes/ssl/server-key.pem \
--client-ca-file=/k8s/kubernetes/ssl/ca.pem \
--service-account-key-file=/k8s/kubernetes/ssl/ca-key.pem \
--etcd-cafile=/k8s/etcd/ssl/ca.pem \
--etcd-certfile=/k8s/etcd/ssl/server.pem \
--etcd-keyfile=/k8s/etcd/ssl/server-key.pem"

创建 kube-apiserver systemd unit 文件

vim /usr/lib/systemd/system/kube-apiserver.service 

[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/k8s/kubernetes/cfg/kube-apiserver
ExecStart=/k8s/kubernetes/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

启动服务

systemctl daemon-reload
systemctl enable kube-apiserver
systemctl restart kube-apiserver

查看apiserver是否运行

ps -ef |grep kube-apiserver
root      76300      1 45 08:57 ?        00:00:14 /k8s/kubernetes/bin/kube-apiserver --logtostderr=true --v=4 --etcd-servers=https://192.168.136.150:2379,https://192.168.136.151:2379,https://192.168.136.152:2379 --bind-address=192.168.136.150 --secure-port=6443 --advertise-address=172.16.9.51 --allow-privileged=true --service-cluster-ip-range=10.0.0.0/24 --enable-admission-plugins=NamespaceLifecycle,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota,NodeRestriction --authorization-mode=RBAC,Node --enable-bootstrap-token-auth --token-auth-file=/k8s/kubernetes/cfg/token.csv --service-node-port-range=30000-50000 --tls-cert-file=/k8s/kubernetes/ssl/server.pem --tls-private-key-file=/k8s/kubernetes/ssl/server-key.pem --client-ca-file=/k8s/kubernetes/ssl/ca.pem --service-account-key-file=/k8s/kubernetes/ssl/ca-key.pem --etcd-cafile=/k8s/etcd/ssl/ca.pem --etcd-certfile=/k8s/etcd/ssl/server.pem --etcd-keyfile=/k8s/etcd/ssl/server-key.pem
root      76357   4370  0 08:58 pts/1    00:00:00 grep --color=auto kube-apiserver

部署kube-scheduler

创建kube-scheduler配置文件

vim  /k8s/kubernetes/cfg/kube-scheduler 

KUBE_SCHEDULER_OPTS="--logtostderr=true --v=4 --master=127.0.0.1:8080 --leader-elect"

–address：在 127.0.0.1:10251 端口接收 http /metrics 请求；kube-scheduler 目前还不支持接收 https 请求；

–kubeconfig：指定 kubeconfig 文件路径，kube-scheduler 使用它连接和验证 kube-apiserver；

–leader-elect=true：集群运行模式，启用选举功能；被选为 leader 的节点负责处理工作，其它节点为阻塞状态；

创建kube-scheduler systemd unit 文件

vim /usr/lib/systemd/system/kube-scheduler.service 
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/k8s/kubernetes/cfg/kube-scheduler
ExecStart=/k8s/kubernetes/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

启动服务

systemctl daemon-reload
systemctl enable kube-scheduler.service 
systemctl restart kube-scheduler.service

查看kube-scheduler是否运行

# ps -ef |grep kube-scheduler 
root      77854      1  8 09:17 ?        00:00:02 /k8s/kubernetes/bin/kube-scheduler --logtostderr=true --v=4 --master=127.0.0.1:8080 --leader-elect
root      77901   1305  0 09:18 pts/0    00:00:00 grep --color=auto kube-scheduler
# systemctl status kube-scheduler.service 
● kube-scheduler.service - Kubernetes Scheduler
   Loaded: loaded (/usr/lib/systemd/system/kube-scheduler.service; disabled; vendor preset: disabled)
   Active: active (running) since 三 2018-12-05 09:17:43 CST; 29s ago
     Docs: https://github.com/kubernetes/kubernetes
 Main PID: 77854 (kube-scheduler)
    Tasks: 13
   Memory: 10.9M
   CGroup: /system.slice/kube-scheduler.service
           └─77854 /k8s/kubernetes/bin/kube-scheduler --logtostderr=true --v=4 --master=127.0.0.1:8080 --leader-elect

12月 05 09:17:45 master kube-scheduler[77854]: I1205 09:17:45.642632   77854 shared_informer.go:123] caches populated
12月 05 09:17:45 master kube-scheduler[77854]: I1205 09:17:45.743297   77854 shared_informer.go:123] caches populated
12月 05 09:17:45 master kube-scheduler[77854]: I1205 09:17:45.844554   77854 shared_informer.go:123] caches populated
12月 05 09:17:45 master kube-scheduler[77854]: I1205 09:17:45.945332   77854 shared_informer.go:123] caches populated
12月 05 09:17:45 master kube-scheduler[77854]: I1205 09:17:45.945434   77854 controller_utils.go:1027] Waiting for caches to sync for scheduler controller
12月 05 09:17:46 master kube-scheduler[77854]: I1205 09:17:46.046385   77854 shared_informer.go:123] caches populated
12月 05 09:17:46 master kube-scheduler[77854]: I1205 09:17:46.046427   77854 controller_utils.go:1034] Caches are synced for scheduler controller
12月 05 09:17:46 master kube-scheduler[77854]: I1205 09:17:46.046574   77854 leaderelection.go:205] attempting to acquire leader lease  kube-system/kube-scheduler...
12月 05 09:17:46 master kube-scheduler[77854]: I1205 09:17:46.063185   77854 leaderelection.go:214] successfully acquired lease kube-system/kube-scheduler
12月 05 09:17:46 master kube-scheduler[77854]: I1205 09:17:46.164498   77854 shared_informer.go:123] caches populated

部署kube-controller-manager

创建kube-controller-manager配置文件

vim /k8s/kubernetes/cfg/kube-controller-manager

KUBE_CONTROLLER_MANAGER_OPTS="--logtostderr=true \
--v=4 \
--master=127.0.0.1:8080 \
--leader-elect=true \
--address=127.0.0.1 \
--service-cluster-ip-range=10.0.0.0/24 \
--cluster-name=kubernetes \
--cluster-signing-cert-file=/k8s/kubernetes/ssl/ca.pem \
--cluster-signing-key-file=/k8s/kubernetes/ssl/ca-key.pem  \
--root-ca-file=/k8s/kubernetes/ssl/ca.pem \
--service-account-private-key-file=/k8s/kubernetes/ssl/ca-key.pem"

创建kube-controller-manager systemd unit 文件

vim /usr/lib/systemd/system/kube-controller-manager.service 

[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/k8s/kubernetes/cfg/kube-controller-manager
ExecStart=/k8s/kubernetes/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

启动服务

systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl restart kube-controller-manager

查看kube-controller-manager是否运行

# systemctl status kube-controller-manager
● kube-controller-manager.service - Kubernetes Controller Manager
   Loaded: loaded (/usr/lib/systemd/system/kube-controller-manager.service; enabled; vendor preset: disabled)
   Active: active (running) since 三 2018-12-05 09:35:00 CST; 3s ago
     Docs: https://github.com/kubernetes/kubernetes
 Main PID: 79191 (kube-controller)
    Tasks: 8
   Memory: 15.2M
   CGroup: /system.slice/kube-controller-manager.service
           └─79191 /k8s/kubernetes/bin/kube-controller-manager --logtostderr=true --v=4 --master=127.0.0.1:8080 --leader-elect=true --address=127.0.0.1 --service-cluster-ip-range=10.0.0....

12月 05 09:35:01 master kube-controller-manager[79191]: I1205 09:35:01.350599   79191 serving.go:318] Generated self-signed cert in-memory
12月 05 09:35:01 master kube-controller-manager[79191]: W1205 09:35:01.762710   79191 authentication.go:235] No authentication-kubeconfig provided in order to lookup...on't work.
12月 05 09:35:01 master kube-controller-manager[79191]: W1205 09:35:01.762767   79191 authentication.go:238] No authentication-kubeconfig provided in order to lookup...on't work.
12月 05 09:35:01 master kube-controller-manager[79191]: W1205 09:35:01.762792   79191 authorization.go:146] No authorization-kubeconfig provided, so SubjectAcce***ev...on't work.
12月 05 09:35:01 master kube-controller-manager[79191]: I1205 09:35:01.762827   79191 controllermanager.go:151] Version: v1.13.0
12月 05 09:35:01 master kube-controller-manager[79191]: I1205 09:35:01.763446   79191 secure_serving.go:116] Serving securely on [::]:10257
12月 05 09:35:01 master kube-controller-manager[79191]: I1205 09:35:01.763925   79191 deprecated_insecure_serving.go:51] Serving insecurely on 127.0.0.1:10252
12月 05 09:35:01 master kube-controller-manager[79191]: I1205 09:35:01.764443   79191 leaderelection.go:205] attempting to acquire leader lease  kube-system/kube-con...manager...
12月 05 09:35:01 master kube-controller-manager[79191]: I1205 09:35:01.770798   79191 leaderelection.go:289] lock is held by master_fab3fbe9-f82d-11e8-9140...et expired
12月 05 09:35:01 master kube-controller-manager[79191]: I1205 09:35:01.770817   79191 leaderelection.go:210] failed to acquire lease kube-system/kube-controller-manager
Hint: Some lines were ellipsized, use -l to show in full.

# ps -ef |grep kube-controller-manager
root      79191      1 10 09:35 ?        00:00:01 /k8s/kubernetes/bin/kube-controller-manager --logtostderr=true --v=4 --master=127.0.0.1:8080 --leader-elect=true --address=127.0.0.1 --service-cluster-ip-range=10.0.0.0/24 --cluster-name=kubernetes --cluster-signing-cert-file=/k8s/kubernetes/ssl/ca.pem --cluster-signing-key-file=/k8s/kubernetes/ssl/ca-key.pem --root-ca-file=/k8s/kubernetes/ssl/ca.pem --service-account-private-key-file=/opt/kubernetes/ssl/ca-key.pem
root      79220   1305  0 09:35 pts/0    00:00:00 grep --color=auto kube-controller-manager

将可执行文件路/k8s/kubernetes/ 添加到 PATH 变量中

vim /etc/profile
PATH=/k8s/kubernetes/bin:$PATH:$HOME/bin
source /etc/profile

查看master集群状态

# kubectl get cs,nodes
NAME                                 STATUS    MESSAGE             ERROR
componentstatus/scheduler            Healthy   ok                  
componentstatus/etcd-2               Healthy   {"health":"true"}   
componentstatus/etcd-1               Healthy   {"health":"true"}   
componentstatus/etcd-0               Healthy   {"health":"true"}   
componentstatus/controller-manager   Healthy   ok

5、部署node 节点

kubernetes work 节点运行如下组件：

docker 前面已经部署
kubelet
kube-proxy

部署 kubelet 组件

kublet 运行在每个 worker 节点上，接收 kube-apiserver 发送的请求，管理 Pod 容器，执行交互式命令，如exec、run、logs 等; kublet 启动时自动向 kube-apiserver 注册节点信息，内置的 cadvisor 统计和监控节点的资源使用情况; 为确保安全，本文档只开启接收 https 请求的安全端口，对请求进行认证和授权，拒绝未授权的访问(如apiserver、heapster)。

将kubelet 二进制文件拷贝node节点

cp kubelet kube-proxy /k8s/kubernetes/bin/
scp kubelet kube-proxy 192.168.136.151:/k8s/kubernetes/bin/
scp kubelet kube-proxy 192.168.136.152:/k8s/kubernetes/bin/

-----------------------------------------------------------------------------2019-02-22 -----------------------

创建 kubelet bootstrap kubeconfig 文件（注意environment.sh会云找*.pem文件，需要放在*.pem文件的路径下，否则会报错）

vim  environment.sh
# 创建kubelet bootstrapping kubeconfig 
BOOTSTRAP_TOKEN=8d1d67884006ea8494cbc42a1b67715b
KUBE_APISERVER="https://192.168.136.150:6443"
# 设置集群参数
kubectl config set-cluster kubernetes \
  --certificate-authority=./ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=bootstrap.kubeconfig
# 设置客户端认证参数
kubectl config set-credentials kubelet-bootstrap \
  --token=${BOOTSTRAP_TOKEN} \
  --kubeconfig=bootstrap.kubeconfig
# 设置上下文参数
kubectl config set-context default \
  --cluster=kubernetes \
  --user=kubelet-bootstrap \
  --kubeconfig=bootstrap.kubeconfig
# 设置默认上下文
kubectl config use-context default --kubeconfig=bootstrap.kubeconfig
#----------------------

# 创建kube-proxy kubeconfig文件
kubectl config set-cluster kubernetes \
  --certificate-authority=./ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=kube-proxy.kubeconfig  
kubectl config set-credentials kube-proxy \
  --client-certificate=./kube-proxy.pem \
  --client-key=./kube-proxy-key.pem \
  --embed-certs=true \
  --kubeconfig=kube-proxy.kubeconfig
kubectl config set-context default \
  --cluster=kubernetes \
  --user=kube-proxy \
  --kubeconfig=kube-proxy.kubeconfig
kubectl config use-context default --kubeconfig=kube-proxy.kubeconfig

将bootstrap.kubeconfig kube-proxy.kubeconfig 文件拷贝到所有 nodes节点
cp bootstrap.kubeconfig kube-proxy.kubeconfig /k8s/kubernetes/cfg/
scp bootstrap.kubeconfig kube-proxy.kubeconfig 192.168.136.151:/k8s/kubernetes/cfg/
scp bootstrap.kubeconfig kube-proxy.kubeconfig 192.168.136.152:/k8s/kubernetes/cfg/

创建kubelet 参数配置文件拷贝到所有 nodes节点(注意：address、hostname-override、 kube-proxy都改成本地的，否则启动时找不到node)

1、创建 kubelet 参数配置模板文件：

vim /k8s/kubernetes/cfg/kubelet.config
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 192.168.136.150
port: 10250
readOnlyPort: 10255
cgroupDriver: cgroupfs
clusterDNS: ["10.0.0.2"]
clusterDomain: cluster.local.
failSwapOn: false
authentication:
  anonymous:
    enabled: true

2、创建kubelet配置文件

vim /k8s/kubernetes/cfg/kubelet
KUBELET_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=192.168.136.150 \
--kubeconfig=/k8s/kubernetes/cfg/kubelet.kubeconfig \
--bootstrap-kubeconfig=/k8s/kubernetes/cfg/bootstrap.kubeconfig \
--config=/k8s/kubernetes/cfg/kubelet.config \
--cert-dir=/k8s/kubernetes/ssl \
--pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google-containers/pause-amd64:3.0"

3、创建kubelet systemd unit 文件

vim /usr/lib/systemd/system/kubelet.service 
[Unit]
Description=Kubernetes Kubelet
After=docker.service
Requires=docker.service
[Service]
EnvironmentFile=/k8s/kubernetes/cfg/kubelet
ExecStart=/k8s/kubernetes/bin/kubelet $KUBELET_OPTS
Restart=on-failure
KillMode=process
[Install]
WantedBy=multi-user.target

将kubelet-bootstrap用户绑定到系统集群角色

kubectl create clusterrolebinding kubelet-bootstrap \
  --clusterrole=system:node-bootstrapper \
  --user=kubelet-bootstrap

启动服务

systemctl daemon-reload
systemctl enable kubelet
systemctl restart kubelet

approve kubelet CSR 请求 可以手动或自动 approve CSR 请求。推荐使用自动的方式，因为从 v1.8 版本开始，可以自动轮转approve csr 后生成的证书。 手动 approve CSR 请求

### 查看 CSR 列表：
# kubectl get csr
NAME                                                   AGE    REQUESTOR           CONDITION
node-csr-An1VRgJ7FEMMF_uyy6iPjyF5ahuLx6tJMbk2SMthwLs   39m    kubelet-bootstrap   Pending
node-csr-dWPIyP_vD1w5gBS4iTZ6V5SJwbrdMx05YyybmbW3U5s   5m5s   kubelet-bootstrap   Pending

# kubectl certificate approve node-csr-An1VRgJ7FEMMF_uyy6iPjyF5ahuLx6tJMbk2SMthwLs
certificatesigningrequest.certificates.k8s.io/node-csr-An1VRgJ7FEMMF_uyy6iPjyF5ahuLx6tJMbk2SMthwLs 

# kubectl certificate approve node-csr-dWPIyP_vD1w5gBS4iTZ6V5SJwbrdMx05YyybmbW3U5s  
certificatesigningrequest.certificates.k8s.io/node-csr-dWPIyP_vD1w5gBS4iTZ6V5SJwbrdMx05YyybmbW3U5s approved
[
# kubectl get csr
NAME                                                   AGE     REQUESTOR           CONDITION
node-csr-An1VRgJ7FEMMF_uyy6iPjyF5ahuLx6tJMbk2SMthwLs   41m     kubelet-bootstrap   Approved,Issued
node-csr-dWPIyP_vD1w5gBS4iTZ6V5SJwbrdMx05YyybmbW3U5s   7m32s   kubelet-bootstrap   Approved,Issued

Requesting User：请求 CSR 的用户，kube-apiserver 对它进行认证和授权； Subject：请求签名的证书信息； 证书的 CN 是 system:node:kube-node2， Organization 是 system:nodes，kube-apiserver 的 Node 授权模式会授予该证书的相关权限；

查看集群状态

# kubectl get nodes
NAME           STATUS   ROLES    AGE   VERSION
192.168.136.150   Ready    <none>   39m   v1.13.0
192.168.136.151   Ready    <none>   25s   v1.13.0
192.168.136.152   Ready    <none>   13s   v1.13.0

部署 kube-proxy 组件

kube-proxy 运行在所有 node节点上，它监听 apiserver 中 service 和 Endpoint 的变化情况，创建路由规则来进行服务负载均衡。

创建 kube-proxy 配置文件

vim /k8s/kubernetes/cfg/kube-proxy
KUBE_PROXY_OPTS="--logtostderr=true \
--v=4 \
--hostname-override=192.168.136.150 \
--cluster-cidr=10.0.0.0/24 \
--kubeconfig=/k8s/kubernetes/cfg/kube-proxy.kubeconfig"

bindAddress: 监听地址； clientConnection.kubeconfig: 连接 apiserver 的 kubeconfig 文件； clusterCIDR: kube-proxy 根据 –cluster-cidr 判断集群内部和外部流量，指定 –cluster-cidr 或 –masquerade-all 选项后 kube-proxy 才会对访问 Service IP 的请求做 SNAT； hostnameOverride: 参数值必须与 kubelet 的值一致，否则 kube-proxy 启动后会找不到该 Node，从而不会创建任何 ipvs 规则； mode: 使用 ipvs 模式；

 

创建kube-proxy systemd unit 文件

vim /usr/lib/systemd/system/kube-proxy.service 

[Unit]
Description=Kubernetes Proxy
After=network.target

[Service]
EnvironmentFile=-/k8s/kubernetes/cfg/kube-proxy
ExecStart=/k8s/kubernetes/bin/kube-proxy $KUBE_PROXY_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target

启动服务

systemctl daemon-reload
systemctl enable kube-proxy
systemctl restart kube-proxy
# systemctl status kube-proxy
● kube-proxy.service - Kubernetes Proxy
   Loaded: loaded (/usr/lib/systemd/system/kube-proxy.service; enabled; vendor preset: disabled)
   Active: active (running) since 三 2018-12-05 22:49:31 CST; 7s ago
 Main PID: 13848 (kube-proxy)
    Tasks: 0
   Memory: 11.1M
   CGroup: /system.slice/kube-proxy.service
           ‣ 13848 /k8s/kubernetes/bin/kube-proxy --logtostderr=true --v=4 --hostname-override=192.168.136.150 --cluster-cidr=10.0.0.0/24 --kubeconfig=/k8s/kubernetes/cfg/kube-proxy.kubecon...

12月 05 22:49:31 master kube-proxy[13848]: I1205 22:49:31.989376   13848 iptables.go:391] running i

集群状态

打node 或者master 节点的标签

kubectl label node 192.168.136.150  node-role.kubernetes.io/master='master'
kubectl label node 192.168.136.151  node-role.kubernetes.io/node='node'
kubectl label node 192.168.136.152  node-role.kubernetes.io/node='node'
# kubectl get node,cs
NAME               STATUS   ROLES    AGE    VERSION
node/192.168.136.150   Ready    master   137m   v1.13.0
node/192.168.136.151   Ready    node     114m   v1.13.0
node/192.168.136.152   Ready    node     93m    v1.13.0

NAME                                 STATUS    MESSAGE             ERROR
componentstatus/controller-manager   Healthy   ok                  
componentstatus/scheduler            Healthy   ok                  
componentstatus/etcd-0               Healthy   {"health":"true"}   
componentstatus/etcd-1               Healthy   {"health":"true"}   
componentstatus/etcd-2               Healthy   {"health":"true"}
xiaoxiao树
关注
  • 0
    点赞
  • 踩
  • 1
    收藏
    觉得还不错? 一键收藏
  • 2
    评论
二进制部署kubernetes集群
weixin_42425505的博客
03-31 58
实验环境 主机名 角色 ip HDSS7-11.host.com k8s代理节点1 10.4.7.11 HDSS7-12.host.com k8s代理节点2 10.4.7.12 HDSS7-21.host.com k8s运算节点 10.4.7.21 HDSS7-22.host.com k8s运算节点2 10.4.7.22 HDSS7-200.host.com k8s运维节点(docker仓库) 10.4.7.200 硬件环境 - 5台vm，每台至少2c2g 软件环境
手把手教你二进制部署kubernetes集群
懒懒的书虫
06-27 530
手把手教你二进制部署kubernetes集群关闭防火墙关闭selinux关闭swap根据规划设置主机名在master添加hosts将桥接的IPv4流量传递到iptables的链时间同步生成 kubelet bootstrap kubeconfig 配置文件查看kubelet证书请求批准申请查看节点切换工作目录创建证书请求文件生成证书四层负载均衡，为两台Master apiserver组件提供负载均衡 部署一套完整的Kubernetes高可用集群（上） 目录[-] 一、前置知识点 1.1 生产环境可部署Kub
Kubernetes ubuntu二进制包安装
齐泽文的Blog
01-10 2427
Kubernetes源码安装 文章目录Kubernetes源码安装前期准备结构图使用root账号登录关闭系统交换分区功能Master节点安装etcd服务kube-apiserverkube-controller-managerkube-scheduler配置完成启动Node节点安装安装docker下载所需要的安装包安装docker包docker-compose安装kubelet服务kube-pro...
kubernetes二进制部署k8s-master集群controller-manager服务unhealthy问题
li123128的博客
12-29 7326
　　一.问题现象 　　 　　我们使用二进制部署k8s的高可用集群时，在部署多master时，kube-controller-manager服务提示Unhealthy 　　 　　[root@ceph-01 system]# kubectl get cs 　　 　　NAME                 STATUS      MESSAGE                             ...
k8s学习笔记——安装中常见错误2
潮落拾贝
06-23 1337
1、执行kubeadm init集群初始化时遇到或join： [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". 解决方法： vim /etc/docker/daemon.json 加入以下内容： { "exec-opts":["native.cgroupdriver=systemd"] } systemctl .
安装k8s实践(多主机未加密)
钟明家
06-24 161
1、下载需要的安装包。 # wget https://github.com/etcd-io/etcd/releases/download/v3.3.13/etcd-v3.3.13-linux-amd64.tar.gz # wget https://dl.k8s.io/v1.14.3/kubernetes.tar.gz 2、安装etcd # tar -xf etcd-v3....
CentOS 使用二进制部署 Kubernetes 1.13集群.docx
04-24
本文档主要介绍了如何在 CentOS 系统上使用二进制方式部署 Kubernetes 1.13 集群。Kubernetes（简称 K8s）是一个开源的容器管理系统，能够自动化容器编排、部署和扩展。在选择部署方式时，文章建议避免使用像 ...
CentOS7 使用二进制部署 Kubernetes 1.13集群-附件资源
03-02
CentOS7 使用二进制部署 Kubernetes 1.13集群-附件资源
centos7 kubernetes(k8s)1.12集群部署与使用(一)：基础知识介绍和系统初始化
夏冬丶王阳旭
01-08 2137
前言     今天，给自己开个坑，来系统的记录一下kubernetes的部署与使用，kubernetes，国内常简称为k8s，是目前最主流最热门的容器编排工具，本次系列博客，主要记录讲解kubernetes的部署与使用，在其中顺便将一些常见或容易遇到的问题说一下，如果写的不够清楚或什么的，有任何问题，欢迎大家留言提出建议或咨询。   概述     kubernetes作为容器编排技术，与目...
二进制部署k8s1.18（上）
zenglingmin8的博客
05-20 349
正在整理中，敬请期待
k8s配置master
kadwf123的专栏
12-18 685
检查etcd集群的状态： [root@master ~]# etcdctl cluster-health member 8e9e05c52164694d is healthy: got healthy result from http://192.168.2.178:2379 cluster is healthy [root@master ~]# vi /etc/sysconfig/fl...
Kubernetes1.91（K8s）安装部署过程（四）--Master节点安装
weixin_34252686的博客
01-04 249
再次明确下架构： 三台虚拟机 centos 7.4系统，docker为17版本，ip为10.10.90.105到107，其中105位master，接下来的master相关组件安装到此机器上。 etcd集群为3台，分别复用这3台虚拟机。 作为k8s的核心，master节点主要包含三个组件，分别是： 三个组件：kube-apiserver kube-scheduler ku...
解决kubernetes:v1.18.6 get cs127.0.0.1 connection refused错误
迷离的博客
08-05 2722
在我们正常安装kubernetes1.18.6之后，可能会出现一下错误： [root@k8s-master manifests]# kubectl get cs NAME STATUS MESSAGE ERROR scheduler Unhealthy Get http://
使用Node 搭建HTTPS服务
袁梦龙的博客
06-22 7141
HTTPS 理论  1.对HTTPS 原理   前面已经讲过，不在赘述: HTTPS原文链接http://blog.csdn.net/yuanmengong886/article/details/54618351 2. 数字证书    是一种用于电脑的身份识别机制。由数字证书颁发机构（CA）对使用私钥创建的签名请求文件做的签名（盖章），表示CA结构对证书持有者
loaded (/usr/lib/systemd/system/docker.service； disabled； vendor preset: disabled) docker报错信息
热门推荐
w2909526的博客
03-06 1万+
docker安装之后启动报错 ● docker.service - Docker Application Container Engine Loaded: loaded (/usr/lib/systemd/system/docker.service; disabled; vendor preset: disabled) Active: failed (Result: start-limit) since Sat 2021-03-06 14:25:32 CST; 5s ago Docs:
评论 2
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值