-
下载源码:
1) 从svn checkout https://dev.wifidog.org/svn/trunk/wifidog-auth下载最新的wifidog 网关源码
2) 从http://sourceforge.net/projects/wifidog/files/wifidog-gateway/下载wifidog 网关源码
我使用第二种下载方法下载wifidog-20090925.tar.gz 版本,这是目前最新的wifidog。 -
解压: tar -zxvf wifidog-20090925.tar.gz
-
cd wifidog-20090925; ./configure; make; make install, /usr/local/bin/目录下会多一个wifidog
-
到这里我们需要配置下源码根目录下的wifidog.conf,并再修改后将文件拷贝至 /usr/local/etc/,
GatewayID default #网关的ID,如果不设置默认是网关interface 的 mac地址
GatewayInterface br0 #网关使用的LAN Interface,必须设置 GatewayAddress 192.168.1.1 #网关LAN 的IP地址,不设置默认从interface拿IP AuthServer #必须设置 { Hostname (Mandatory; Default: NONE) #认证server 的主机名 SSLAvailable (Optional; Default: no; Possible values: yes, no) #认证server是否使用ssl协议 SSLPort (Optional; Default: 443) #认证server ssl协议端口 HTTPPort (Optional; Default: 80) #http协议端口 Path (Optional; Default: /wifidog/ Note: The path must be both prefixed and suffixed by /. Use a single / for server root.) LoginScriptPathFragment (Optional; Default: login/? Note: This is the script the user will be sent to for login.) PortalScriptPathFragment (Optional; Default: portal/? Note: This is the script the user will be sent to after a successfull login.) MsgScriptPathFragment (Optional; Default: gw_message.php? Note: This is the script the user will be sent to upon error to read a readable message.) PingScriptPathFragment (Optional; Default: ping/? Note: This is the script the user will be sent to upon error to read a readable message.) AuthScriptPathFragment (Optional; Default: auth/? Note: This is the script the user will be sent to upon error to read a readable message.) } GatewayPort 2060 #wifidog监听的端口 CheckInterval 60 #检查连接网关客户端的流量,主要是用于流量更新、超时重新认证 ClientTimeout 5 #checkinterval的间隔数,这里要注意,实际流量更新遗迹超时、检查使用的时间是CheckInterval * ClientTimeout TrustedMACList 00:00:DE:AD:BE:AF,00:00:C0:1D:F0:0D #MAC地址白名单
后面还有一些关于网段、port 的黑白名单规则,以及其他一些设置,这里就不一一列举了。
启动wifidog -c /usr/local/etc/wifidog.conf 就可以和auth server交互了,auth server可以参考安装authpuppy,这里就不详细解释了
linux 系统安装wifidog
最新推荐文章于 2021-06-02 15:03:52 发布