(VMware)Solaris 10添加新硬盘

(VMware)Solaris 10添加新硬盘

一：装载硬盘到SUN主机，开机进入系统。

二：运行format命令，先选择要进行分区格式化的磁盘

bash-3.2# format        #查看已经挂接上的硬盘
Searching for disks...done
AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <VMware,-VMware Virtual -1.0  cyl 1955 alt 2 hd 255 sec 63>
          /pci@0,0/pci15ad,1976@10/sd@0,0
       1. c1t1d0 <VMware,-VMware Virtual -1.0  cyl 1021 alt 2 hd 64 sec 32>
          /pci@0,0/pci15ad,1976@10/sd@1,0
Specify disk (enter its number): 1      #选择1硬盘
selecting c1t1d0
[disk formatted]

FORMAT MENU:
        disk       - select a disk
        type       - select (define) a disk type
        partition  - select (define) a partition table
        current    - describe the current disk
        format     - format and analyze the disk
        fdisk      - run the fdisk program
        repair     - repair a defective sector
        label      - write label to the disk
        analyze    - surface analysis
        defect     - defect list management
        backup     - search for backup labels
        verify     - read and display labels
        save       - save new disk/partition definitions
        inquiry    - show vendor, product and revision
        volname    - set 8-character volume name
        !<cmd>     - execute <cmd>, then return
        quit

三：输入命令fdisk，对硬盘进行分区后，退出fdisk界面。
format> p    #新硬盘，要先用fdisk格式化后，才能用partition进行分区，不然会有提示如下：
Please run fdisk first

format> fdisk
No fdisk table exists. The default partition for the disk is:

  a 100% "SOLARIS System" partition

Type "y" to accept the default partition,  otherwise type "n" to edit the
 partition table.
y

四：输入命令partition，在格式化硬盘后，进行分区
format> p