openCV matchTemplate函数不同参数对应的相似性度量

最新推荐文章于 2023-12-06 08:23:03 发布

旋转太极

最新推荐文章于 2023-12-06 08:23:03 发布

阅读量3.9k

点赞数

文章标签：机器学习

Compares a template against overlapped image regions.

C++: void matchTemplate (InputArray image, InputArray templ, OutputArray result, int method )

Python: cv2. matchTemplate (image, templ, method [, result ] ) → result

C: void cvMatchTemplate (const CvArr* image, const CvArr* templ, CvArr* result, int method )

Python: cv. MatchTemplate (image, templ, result, method ) → None

Parameters:

Parameters:	image – Image where the search is running. It must be 8-bit or 32-bit floating-point. templ – Searched template. It must be not greater than the source image and have the same data type. result – Map of comparison results. It must be single-channel 32-bit floating-point. If `image`is $W \times H$ and `templ` is $w \times h$ , then `result` is $(W-w+1) \times (H-h+1)$ . method – Parameter specifying the comparison method (see below).

image – Image where the search is running. It must be 8-bit or 32-bit floating-point.
templ – Searched template. It must be not greater than the source image and have the same data type.
result – Map of comparison results. It must be single-channel 32-bit floating-point. If imageis $W \times H$ and templ is $w \times h$ , then result is $(W-w+1) \times (H-h+1)$ .
method – Parameter specifying the comparison method (see below).

The function slides through image , compares the overlapped patches of size $w \times h$ against templ using the specified method and stores the comparison results in result . Here are the formulae for the available comparison methods ( $I$ denotes image, $T$ template, $R$ result ). The summation is done over template and/or the image patch: $x' = 0...w-1, y' = 0...h-1$ * method=CV_TM_SQDIFF

$R(x,y)= \sum _{x',y'} (T(x',y')-I(x+x',y+y'))^2$

method=CV_TM_SQDIFF_NORMED

$R(x,y)= \frac{\sum_{x',y'} (T(x',y')-I(x+x',y+y'))^2}{\sqrt{\sum_{x',y'}T(x',y')^2 \cdot \sum_{x',y'} I(x+x',y+y')^2}}$
method=CV_TM_CCORR

$R(x,y)= \sum _{x',y'} (T(x',y') \cdot I(x+x',y+y'))$
method=CV_TM_CCORR_NORMED

$R(x,y)= \frac{\sum_{x',y'} (T(x',y') \cdot I(x+x',y+y'))}{\sqrt{\sum_{x',y'}T(x',y')^2 \cdot \sum_{x',y'} I(x+x',y+y')^2}}$
method=CV_TM_CCOEFF

$R(x,y)= \sum _{x',y'} (T'(x',y') \cdot I'(x+x',y+y'))$

where

$\begin{array}{l} T'(x',y')=T(x',y') - 1/(w \cdot h) \cdot \sum _{x'',y''} T(x'',y'') \\ I'(x+x',y+y')=I(x+x',y+y') - 1/(w \cdot h) \cdot \sum _{x'',y''} I(x+x'',y+y'') \end{array}$
method=CV_TM_CCOEFF_NORMED

$R(x,y)= \frac{ \sum_{x',y'} (T'(x',y') \cdot I'(x+x',y+y')) }{ \sqrt{\sum_{x',y'}T'(x',y')^2 \cdot \sum_{x',y'} I'(x+x',y+y')^2} }$

After the function finishes the comparison, the best matches can be found as global minimums (when CV_TM_SQDIFF was used) or maximums (when CV_TM_CCORR or CV_TM_CCOEFF was used) using the minMaxLoc() function. In case of a color image, template summation in the numerator and each sum in the denominator is done over all of the channels and separate mean values are used for each channel. That is, the function can take a color template and a color image. The result will still be a single-channel image, which is easier to analyze.

旋转太极

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
openCV matchTemplate函数不同参数对应的相似性度量

Compares a template against overlapped image regions.C++: void matchTemplate(InputArray image, InputArray templ, OutputArray result, int method)Python: cv2.matchTemplate(image, templ,
复制链接

扫一扫