首先安装:
[arm@acer ~]$ sudo yum -y install smartmontools
执行:
[arm@acer ~]$ sudo smartctl -A /dev/sda
可以看到如下结果:
smartctl 5.43 2012-06-30 r3573 [i686-linux-2.6.32-358.23.2.el6.i686] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 186 166 021 Pre-fail Always - 1666
4 Start_Stop_Count 0x0032 092 092 000 Old_age Always - 8708
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 6137
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2652
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 958
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 111
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 304147
194 Temperature_Celsius 0x0022 106 095 000 Old_age Always - 41
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0