[iOS_Dev] bitMask 位掩码 NS_OPTIONS

最新推荐文章于 2021-08-24 09:25:39 发布

iOS_Dev_OYXJ

最新推荐文章于 2021-08-24 09:25:39 发布

阅读量851

点赞数

分类专栏： iOS_Dev 文章标签： objective-c ios bitmask NS_OPTIONS

iOS_Dev 专栏收录该内容

20 篇文章 0 订阅

订阅专栏

[iOS_Dev] bitMask 位掩码 NS_OPTIONS
//转 http://stackoverflow.com/questions/18591924/how-to-use-bitmask

8 down vote accepted

Bit masking is "useful" to use when you want to store (and subsequently extract) different data within a single data value.

An example application I've used before is imagine you were storing colour RGB values in a 16 bit value. So something that looks like this:

RRRR RGGG GGGB BBBB

You could then use bit masking to retrieve the colour components as follows:

  const unsigned short redMask   = 0xF800;
  const unsigned short greenMask = 0x07E0;
  const unsigned short blueMask  = 0x001F;

  unsigned short lightGray = 0x7BEF;

  unsigned short redComponent   = (lightGray & redMask) >> 11;
  unsigned short greenComponent = (lightGray & greenMask) >> 5;
  unsigned short blueComponent =  (lightGray & blueMask);

30 down vote

Briefly bitmask helps to manipulate position of multiple values. There is a good example here ;

Bitflags are a method of storing multiple values, which are not mutucally exclusive, in one variable. You've probably seen them before. Each flag is a bit position which can be set on or off. You then have a bunch of bitmasks #defined for each bit position so you can easily manipulate it:

    #define LOG_ERRORS            1  // 2^0, bit 0
    #define LOG_WARNINGS          2  // 2^1, bit 1
    #define LOG_NOTICES           4  // 2^2, bit 2
    #define LOG_INCOMING          8  // 2^3, bit 3
    #define LOG_OUTGOING         16  // 2^4, bit 4
    #define LOG_LOOPBACK         32  // and so on...

// Only 6 flags/bits used, so a char is fine
unsigned char flags;

// initialising the flags
// note that assignming a value will clobber any other flags, so you
// should generally only use the = operator when initialising vars.
flags = LOG_ERRORS;
// sets to 1 i.e. bit 0

//initialising to multiple values with OR (|)
flags = LOG_ERRORS | LOG_WARNINGS | LOG_INCOMING;
// sets to 1 + 2 + 8 i.e. bits 0, 1 and 3

// setting one flag on, leaving the rest untouched
// OR bitmask with the current value
flags |= LOG_INCOMING;

// testing for a flag
// AND with the bitmask before testing with ==
if ((flags & LOG_WARNINGS) == LOG_WARNINGS)
   ...

// testing for multiple flags
// as above, OR the bitmasks
if ((flags & (LOG_INCOMING | LOG_OUTGOING))
         == (LOG_INCOMING | LOG_OUTGOING))
   ...

// removing a flag, leaving the rest untouched
// AND with the inverse (NOT) of the bitmask
flags &= ~LOG_OUTGOING;

// toggling a flag, leaving the rest untouched
flags ^= LOG_LOOPBACK;



**

WARNING: DO NOT use the equality operator (i.e. bitflags == bitmask) for testing if a flag is set - that expression will only be true if that flag is set and all others are unset. To test for a single flag you need to use & and == :

if (flags == LOG_WARNINGS) //DON'T DO THIS
   ...
if ((flags & LOG_WARNINGS) == LOG_WARNINGS) // The right way
   ...
if ((flags & (LOG_INCOMING | LOG_OUTGOING)) // Test for multiple flags set
         == (LOG_INCOMING | LOG_OUTGOING))
   ...

You can also search C++ Triks