uestc02的博客

采用UDP传输协议完成的Labview平台下的文件传输

电压比较器The LM111 series are voltage comparators that have input currents approximately a hundred times lower than devices like the mA710. They are designed to operate over a wider range of supply voltages; from standard ±15V op amp supplies down to a single 3V supply. Their output is compatible with RTL, DTL, and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50mA. Both the inputs and the outputs of the LM111 series can be isolated from system ground, and the output can drive loads referred to ground, the positive supply, or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire-ORed. Although slower than the mA710 (200ns response time vs 40ns), the devices are also much less prone to spurious oscillations. The LM111 series has the same pin configuration as the mA710 series. FEATURES • Operates from single 3V supply (LM311B) • Maximum input bias current: 150nA (LM311—250nA) • Maximum offset current: 20nA (LM311—50nA) • Differential input voltage range: ±30V • Power consumption: 135mW at ±15V • High sensitivity—200V/mV • Zero crossing detector PIN CONFIGURATION 1 2 3 4 5 6 7 8 D, FE, N PACKAGES GND INPUT INPUT V– V+ OUTPUT BAL/STROBE BALANCE + – APPLICATIONS