Android 支持的媒体格式(音频,视频,图片)

Android Supported Media Formats

In this document

1. Network Protocols
2. Core Media Formats
3. Video Encoding Recommendations

See also

1. Audio and Video

Key classes

1. MediaPlayer
2. MediaRecorder

This document describes the media codec, container, and network protocol support provided by the Android platform.

As an application developer, you are free to make use of any media codec that is available on any Android-powered device, including those provided by the Android platform and those that are device-specific.However, it is a best practice to use media encoding profiles that are device-agnostic.

Network Protocols

The following network protocols are supported for audio and video playback:

• RTSP (RTP, SDP)
• HTTP progressive streaming
• HTTP live streaming draft protocol (Android 3.0 and above)

Note: HTTPS is not supported at this time.

Core Media Formats

The table below describes the media format support built into the Android platform. Note that any given mobile device may provide support for additional formats or file types not listed in the table.

Note: Media codecs that are not guaranteed to be available on all Android platform versions are accordingly noted in parentheses—for example "(Android 3.0+)".

Table 1. Core media format and codec support.

Type	Format / Codec	Encoder	Decoder	Details	Supported File Type(s) / Container Formats
Audio	AAC LC/LTP	•	•	Mono/Stereo content in any combination of standard bitrates up to 160 kbps and sampling rates from 8 to 48kHz	3GPP (.3gp), and MPEG-4 (.mp4, .m4a). ADTS raw AAC (.aac, decode only, ADIF not supported, Android 3.1+).
	HE-AACv1 (AAC+)		•
	HE-AACv2 (enhanced AAC+)		•
	AMR-NB	•	•	4.75 to 12.2 kbps sampled @ 8kHz	3GPP (.3gp)
	AMR-WB	•	•	9 rates from 6.60 kbit/s to 23.85 kbit/s sampled @ 16kHz	3GPP (.3gp)
	FLAC		• (Android 3.1+)	Mono/Stereo (no multichannel). Sample rates up to 48 kHz (but up to 44.1kHz is recommended on devices with 44.1 kHz output, as the 48 to 44.1 kHzdownsampler does not include a low-pass filter). 16-bit recommended;no dither applied for 24-bit.	FLAC (.flac) only
	MP3		•	Mono/Stereo 8-320Kbps constant (CBR) or variable bit-rate (VBR)	MP3 (.mp3)
	MIDI		•	MIDI Type 0 and 1. DLS Version 1 and 2. XMF and Mobile XMF. Support for ringtone formats RTTTL/RTX, OTA, and iMelody	Type 0 and 1 (.mid, .xmf, .mxmf). Also RTTTL/RTX (.rtttl, .rtx), OTA (.ota), and iMelody (.imy)
	Ogg Vorbis		•		Ogg (.ogg)
	PCM/WAVE		•	8- and 16-bit linear PCM (rates up to limit of hardware)	WAVE (.wav)
Image	JPEG	•	•	Base+progressive	JPEG (.jpg)
	GIF		•		GIF (.gif)
	PNG	•	•		PNG (.png)
	BMP		•		BMP (.bmp)
Video	H.263	•	•		3GPP (.3gp) and MPEG-4 (.mp4)
	H.264 AVC	• (Android 3.0+)	•	Baseline Profile (BP)	3GPP (.3gp) and MPEG-4 (.mp4). MPEG-TS (.ts, AAC audio only, not seekable, Android 3.0+)
	MPEG-4 SP		•		3GPP (.3gp)
	VP8		• (Android 2.3.3+)		WebM (.webm)

Video Encoding Recommendations

Table 2, below, lists examples of video encoding profiles and parameters that the Android media framework supports for playback. In addition to these encoding parameter recommendations, a device's available video recording profiles can be used as a proxy for media playback capabilities. These profiles can be inspected using the CamcorderProfile class, which is available since API level 8.

Table 2. Examples of supported video encoding parameters.

	Lower quality	Higher quality
Video codec	H.264 Baseline Profile	H.264 Baseline Profile
Video resolution	176 x 144 px	480 x 360 px
Video frame rate	12 fps	30 fps
Video bitrate	56 Kbps	500 Kbps
Audio codec	AAC-LC	AAC-LC
Audio channels	1 (mono)	2 (stereo)
Audio bitrate	24 Kbps	128 Kbps

For video content that is streamed over HTTP or RTSP, there are additional requirements:

• For 3GPP and MPEG-4 containers, the moov atom must precede any mdat atoms.
• For 3GPP, MPEG-4, and WebM containers, audio and video samples corresponding to the same time offset may be no more than 500 KB apart. To minimize this audio/video drift, consider interleaving audio and video in smaller chunk sizes.