|
InstallationUbuntu
How to install BigBlueButton 0.9.0-beta
Welcome to the installation guide for BigBlueButton 0.9.0-beta. BigBlueButton is an open source web conferencing system for on-line learning. For an overview what new in this release, see overview. If you already have a BigBlueButton 0.81 server, these instructions will not upgrade your server. To install BigBlueButton 0.9.0-beta, you need to install on a clean installation of Ubuntu 14.04 64-bit. The reason is that BigBlueButton ran on Ubuntu 10.04 64-bit, whereas BigBlueButton 0.9.0 runs on Ubuntu 14.04 64-bit. We recommend setting up a new Ubuntu 14.04 64-bit server and copying over the recordings from the old BigBlueButton server to the new. Before you installThe requirements for BigBlueButton 0.9.0-beta are
In addition to ensuring your server meets the above requirements, there are a few more checks. First, the locale of the server must be en_US.UTF-8. To verify , enter the following command $ cat /etc/default/locale LANG="en_US.UTF-8" If you don't see LANG="en_US.UTF-8", then enter the following commands. $ sudo apt-get install language-pack-en $ sudo update-locale LANG=en_US.UTF-8 Next, logout and log back into your session (this will reload your configuration). Run cat /etc/default/locale again. Verify you see only the single line LANG="en_US.UTF-8". Note: if you see an additional line LC_ALL=en_US.UTF-8, then remove the setting for LC_ALL before continuing. Check that you are running under 64-bit. $ uname -m x86_64 And check your version of Ubuntu is Ubuntu 14.04. If you try to install BigBlueButton 0.9.0-beta on any other release, it won't work. $ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=14.04 DISTRIB_CODENAME=trusty DISTRIB_DESCRIPTION="Ubuntu 14.04.X LTS" Your now ready to install BigBlueButton. Installing BigBlueButton 0.9.0-betaIf you've already installed an earlier build, see upgrading BigBlueButton 0.9.0. If you encounter an error at any step, STOP and double-check you've entered the proper commands. Don't continue onto the next step (you'll only compound the errors). If you can't resolve it (use Google to search for the error messages), please see support options. 1. Update your serverFirst, ensure that you have trusty multiverse in your sources.list. Do the following. $ grep "multiverse" /etc/apt/sources.list and you should see the line that has a URL to the trusty multiverse uncommented, such as deb http://archive.ubuntu.com/ubuntu trusty multiverse or deb http://archive.ubuntu.com/ubuntu trusty main restricted universe multiverse Don't worry if your URL is different, what's important is you see an uncommented link that contains multiverse. If you don't, then execute the following line this repository to sources.list. $ echo "deb http://us.archive.ubuntu.com/ubuntu/ trusty multiverse" | sudo tee -a /etc/apt/sources.list Before proceeding further, do a dist-upgrade to ensure all the current packages on your server are up-to-date. $ sudo apt-get update $ sudo apt-get dist-upgrade If you've not updated in a while, apt-get may recommend you reboot your server after dist-upgrade finishes. Do the reboot before proceeding to the next step. 2. Install key for BigBlueButtonYou first need to give your server access to the BigBlueButton package repository. In a terminal window, copy and paste the following commands. # Add the BigBlueButton key $ wget http://ubuntu.bigbluebutton.org/bigbluebutton.asc -O- | sudo apt-key add - # Add the BigBlueButton repository URL and ensure the multiverse is enabled $ echo "deb http://ubuntu.bigbluebutton.org/trusty-090/ bigbluebutton-trusty main" | sudo tee /etc/apt/sources.list.d/bigbluebutton.list # Update packages $ sudo apt-get update 3. Install ffmpegBigBlueButton 0.9.0-beta uses ffmpeg to process recordings of a session for playback. To install ffmpeg, create a file called install-ffmpeg.sh and copy and paste in the following script. sudo apt-get install build-essential git-core checkinstall yasm texi2html libvorbis-dev libx11-dev libvpx-dev libxfixes-dev zlib1g-dev pkg-config netcat libncurses5-dev
FFMPEG_VERSION=2.3.3
cd /usr/local/src
if [ ! -d "/usr/local/src/ffmpeg-${FFMPEG_VERSION}" ]; then
sudo wget "http://ffmpeg.org/releases/ffmpeg-${FFMPEG_VERSION}.tar.bz2"
sudo tar -xjf "ffmpeg-${FFMPEG_VERSION}.tar.bz2"
fi
cd "ffmpeg-${FFMPEG_VERSION}"
sudo ./configure --enable-version3 --enable-postproc --enable-libvorbis --enable-libvpx
sudo make
sudo checkinstall --pkgname=ffmpeg --pkgversion="5:${FFMPEG_VERSION}" --backup=no --deldoc=yes --default
Next, run the commands $ chmod +x install-ffmpeg.sh $ ./install-ffmpeg.sh After the script finishes, check that ffmepg is installed by typing the command ffmpeg -version. You should see the following $ ffmpeg -version ffmpeg version 2.3.3 Copyright (c) 2000-2014 the FFmpeg developers built on Aug 18 2014 17:35:05 with gcc 4.8 (Ubuntu 4.8.2-19ubuntu1) configuration: --enable-version3 --enable-postproc --enable-libvorbis --enable-libvpx libavutil 52. 92.100 / 52. 92.100 libavcodec 55. 69.100 / 55. 69.100 libavformat 55. 48.100 / 55. 48.100 libavdevice 55. 13.102 / 55. 13.102 libavfilter 4. 11.100 / 4. 11.100 libswscale 2. 6.100 / 2. 6.100 libswresample 0. 19.100 / 0. 19.100 4. Install BigBlueButtonWe're now ready to install BigblueButton 0.9.0-beta. Type sudo apt-get update sudo apt-get install bigbluebutton This single command is where all the magic happens. This command installs all of BigBlueButton's components with their dependencies. The packaging will do all the work for you to install and configure your BigBlueButton server.
Type 'Y' and press enter to install. If you get an error message ...... Error: FreeSWITCH didn't start you can ignore it as we'll do a clean restart of all the components in step 6. If you get an error message Setting up bbb-playback-presentation (0.9.0-1ubuntu5) ... chown: invalid user: ‘tomcat7:tomcat7’ then run the install again sudo apt-get install bigbluebutton it should finish without errors. 5. Install API DemosTo interactively test your BigBlueButton server, you can install a set of API demos. $ sudo apt-get install bbb-demo You'll need the bbb-demo package installed if you want to join the Demo Meeting from your BigBlueButton server's welcome page. This is the same welcome page you see at dev081 demo server. Later on, if you wish to remove the API demos, you can enter the command $ sudo apt-get purge bbb-demo 6. Enable WebRTC audioTo enable WebRTC audio, do the following $ sudo bbb-conf --enablewebrtc 7. Do a Clean RestartTo ensure BigBlueButton has started cleanly, enter the following commands: $ sudo bbb-conf --clean $ sudo bbb-conf --check The --clean option will clear out all the log files for BigBlueButton. The --check option will grep through the log files looking for errors. The output from sudo bbb-conf --check will display your current settings and, after the text, " Potential problems described below ", print any potential configuration or startup problems it has detected. Upgrading BigBlueButton 0.9.0-betaIf already have a BigBlueButton 0.81 server, these instructions will not upgrade your server. To install BigBlueButton 0.9.0-beta, you need to install on a clean installation of Ubuntu 14.04 64-bit and follow the steps previous in this document. To upgrade earlier versions of BigBlueButton 0.9.0-beta, do the following: $ sudo apt-get update $ sudo apt-get dist-upgrade $ sudo bbb-conf --enablewebrtc $ sudo bbb-conf --clean $ sudo bbb-conf --check Respond with 'Y', if you get prompted to update any configuration file during the upgrade TroubleshootingIf you encounter an error at one of the installation/upgrade steps, Run sudo bbb-conf --checkWe've built in a BigBlueButton configuration utility, called bbb-conf, to help you configure your BigBlueButton server and trouble shoot your setup if something doesn't work right. If you think something isn't working correctly, the first step is enter the following command. $ sudo bbb-conf --check This will check your setup to ensure the correct processes are running, the BigBlueButton components have correctly started, and look for common configuration problems that might prevent BigBlueButton from working properly. If you see text after the line ** Potential problems described below **, then it may be warnings (which you can ignore if you've change settings) or errors with the setup. Some hosting providers do not provide a complete /etc/apt/source.list. If you are finding your are unable to install a package, try replacing your /etc/apt/sources.list with the following deb http://archive.ubuntu.com/ubuntu trusty main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu trusty-updates main restricted universe multiverse deb http://security.ubuntu.com/ubuntu trusty-security main restricted universe multiverse then do $ sudo apt-get update and try installing BigBlueButton again from the beginning steps. Change the BigBlueButton Server's IPA common problem is the default install scripts in for BigBlueButton configure it to list for an IP address, but if you are accessing your server via a DNS hostname, you'll see the 'Welcome to Nginx' message. To change all of BigBlueButton's configuration files to use a different IP address or hostname, enter $ sudo bbb-conf --setip <ip_address_or_hostname> For more information see bbb-conf options. Audio not workingIf you are installing on EC2 or a hosting provider that has a number of network interfaces, you need to tell FreeSWITCH to listen on your external interface on it's IP address (shown below as EXTERNAL_IP_ADDRESS). You must use the external IP address where EXTERNAL_IP_ADDRESS is show (not the external hostname). Edit /opt/freeswitch/conf/vars.xml Remove this line <X-PRE-PROCESS cmd="set" data="local_ip_v4=xxx.yyy.zzz.qqq"/> Change <X-PRE-PROCESS cmd="set" data="bind_server_ip=auto"/> To <X-PRE-PROCESS cmd="set" data="bind_server_ip=EXTERNAL_IP_ADDRESS"/> Change <X-PRE-PROCESS cmd="set" data="external_rtp_ip=stun:stun.freeswitch.org"/> To <X-PRE-PROCESS cmd="set" data="external_rtp_ip=EXTERNAL_IP_ADDRESS"/> Change <X-PRE-PROCESS cmd="set" data="external_sip_ip=stun:stun.freeswitch.org"/> To <X-PRE-PROCESS cmd="set" data="external_sip_ip=EXTERNAL_IP_ADDRESS"/> Edit /opt/freeswitch/conf/sip_profiles/external.xml and change <param name="rtp-ip" value="$${local_ip_v4}"/>
<param name="sip-ip" value="$${local_ip_v4}"/>
<param name="ext-rtp-ip" value="$${local_ip_v4}"/>
<param name="ext-sip-ip" value="$${local_ip_v4}"/>
to <param name="rtp-ip" value="$${local_ip_v4}"/>
<param name="sip-ip" value="$${local_ip_v4}"/>
<param name="ext-rtp-ip" value="$${external_rtp_ip}"/>
<param name="ext-sip-ip" value="$${external_sip_ip}"/>
Edit /usr/share/red5/webapps/sip/WEB-INF/bigbluebutton-sip.properties bbb.sip.app.ip=<internal ip> bbb.sip.app.port=5070 freeswitch.ip=<internal ip> freeswitch.port=5060 Edit /etc/bigbluebutton/nginx/sip.nginx to location /ws {
proxy_pass http://EXTERNAL_IP_ADDRESS:5066;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "Upgrade";
proxy_read_timeout 6h;
proxy_send_timeout 6h;
client_body_timeout 6h;
send_timeout 6h;
}
changing EXTERNAL_IP_ADDRESS to your server's elastic IP address. Open the firewall (if you have on installed) and Security Groups (if your using EC2) the following ports: TCP - 5066 UDP - 16384 to 32768 Client WebRTC Error Codes1001: !Websocket disconnected - The WebSocket had connected successfully and has now disconnected. Possible Causes:
1002: Could not make a WebSocket connected - The initial WebSocket connection was unsuccessful. Possible Causes:
1003: Browser version not supported - Browser doesn’t implement the necessary WebRTC API methods. Possible Causes:
1004: Failure on call - The call was attempted, but failed. Possible Causes:
1005: Call ended unexpectedly - The call was successful, but ended without user requesting to end the session. Possible Causes:
1006: Call timed out - The library took too long to try and connect the call. Possible Causes:
1007: ICE negotiation failed - The browser and !FreeSWITCH try to negotiate ports to use to stream the media and that negotiation failed. Possible Causes:
|
扫一扫
08-21
15万+
15万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
