NLB单播和多播区别

展开阅读全文

一个arp单播请求问题?

05-30

在 10.0.0.1给 10.0.0.2发送一个icmp包,收到回复后,又互相发送了一个单播arp请求包,这是用来验证arp和ip映射的还是做什么的,怎么生成的? 系统环境ubuntu16 mininet平台 openvswitch交换机 两个主机是mininet里面模拟的 15:26:04.432530 00:00:00:00:00:01 > 00:00:00:00:00:02, ethertype IPv4 (0x0800), length 98: 10.0.0.1 > 10.0.0.2: ICMP echo request, id 2475, seq 1, length 64 15:26:04.433219 00:00:00:00:00:02 > 00:00:00:00:00:01, ethertype IPv4 (0x0800), length 98: 10.0.0.2 > 10.0.0.1: ICMP echo reply, id 2475, seq 1, length 64 15:26:09.435268 00:00:00:00:00:01 > 00:00:00:00:00:02, ethertype ARP (0x0806), length 42: Request who-has 10.0.0.2 tell 10.0.0.1, length 28 15:26:09.436621 00:00:00:00:00:02 > 00:00:00:00:00:01, ethertype ARP (0x0806), length 42: Request who-has 10.0.0.1 tell 10.0.0.2, length 28 15:26:09.436670 00:00:00:00:00:01 > 00:00:00:00:00:02, ethertype ARP (0x0806), length 42: Reply 10.0.0.1 is-at 00:00:00:00:00:01, length 28 15:26:09.436859 00:00:00:00:00:02 > 00:00:00:00:00:01, ethertype ARP (0x0806), length 42: Reply 10.0.0.2 is-at 00:00:00:00:00:02, length 28 15:27:17.005989 00:00:00:00:00:01 > 00:00:00:00:00:02, ethertype IPv4 (0x0800), length 98: 10.0.0.1 > 10.0.0.2: ICMP echo request, id 2480, seq 1, length 64 15:27:17.006772 00:00:00:00:00:02 > 00:00:00:00:00:01, ethertype IPv4 (0x0800), length 98: 10.0.0.2 > 10.0.0.1: ICMP echo reply, id 2480, seq 1, length 64 15:27:22.011634 00:00:00:00:00:01 > 00:00:00:00:00:02, ethertype ARP (0x0806), length 42: Request who-has 10.0.0.2 tell 10.0.0.1, length 28 15:27:22.012498 00:00:00:00:00:02 > 00:00:00:00:00:01, ethertype ARP (0x0806), length 42: Request who-has 10.0.0.1 tell 10.0.0.2, length 28 15:27:22.012517 00:00:00:00:00:01 > 00:00:00:00:00:02, ethertype ARP (0x0806), length 42: Reply 10.0.0.1 is-at 00:00:00:00:00:01, length 28 15:27:22.012661 00:00:00:00:00:02 > 00:00:00:00:00:01, ethertype ARP (0x0806), length 42: Reply 10.0.0.2 is-at 00:00:00:00:00:02, length 28 问答

没有更多推荐了,返回首页

©️2019 CSDN 皮肤主题: 创作都市 设计师: CSDN官方博客

分享到微信朋友圈

×

扫一扫,手机浏览