适合嵌入式Linux 2.4内核的usb hotplug

 
1. check if /proc/scsi/usb-storage-# exist or not
2. if exist. check if /proc/scsi/usb-storage-#/# exist or not
3. if exist. check the file /proc/scsi/usb-storage-#/# if it says Attach: Yes
4. if Yes. the # can be converted to device name:
0 = sda, 1=sdb, 2=sdc
5. But I don't know which USB port it connects to. and you don't need to know also.

for example: /proc/scsi/usb-storage-0/0 says Attach: No, then /dev/sda is not attached
/proc/scsi/usb-storage-1/1 says Attach: Yes, then it is attached, you can mount it.
If you plug in usb storage with brandname A first, the it is usb-storage-0, then you unplug it, but that directory still exists, and now you plug in Brandname B, the storage-1 directory will be created, and storage-0 is still there.

 

linux 2.6

http://blog.chinaunix.net/u2/72751/showart_1082492.html  待研究