ubuntu 12.04.2 基于 L3.0.35_1.1.0_121218_source LTIB 问题汇总

转载于  http://xuhua402.blog.163.com/blog/static/21774114120132177511560/

1）解压L3.0.35_1.1.0_121218_source.tar.gz

2）cd   L3.0.35_1.1.0_121218_source ,执行./install

3)  复制 patch-ltib-ubuntu12.04.sh 到 litb文件夹，

     修改权限，sudo chmod 777   patch-ltib-ubuntu12.04.sh ,

     执行：./  patch-ltib-ubuntu12.04.sh 

4)执行：./ltib

错误1： make[1]: Entering directory `/opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/bld/linux'

gcc -g -I/opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/elftosb2 -I/opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/keygen -I/opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/sbtool -I/opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/common -DLinux -c /opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/common/AESKey.cpp
In file included from /opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/common/AESKey.h:10:0,
                 from /opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/common/AESKey.cpp:8:
/opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/common/stdafx.h:30:36: fatal error: /usr/include/sys/types.h: No such file or directory
compilation terminated.
make[1]: *** [AESKey.o] Error 1
make[1]: Leaving directory `/opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/bld/linux'
make: *** [all] Error 2
error: Bad exit status from /home/think/imx6/ltib/tmp/rpm-tmp.51338 (%build)


RPM build errors:
    Bad exit status from /home/think/imx6/ltib/tmp/rpm-tmp.51338 (%build)
Build time for elftosb: 0 seconds

Failed building elftosb
Died at ./ltib line 1392.
traceback:
 main::build_host_rpms:1392
  main::host_checks:1447
   main:554

以上错误是因为/opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0/common/stdafx.h,包含的头文件types.h的路径

不对导致，修改stdafx.h文件：

1)cd /opt/freescale/pkgs/

2)tar zxvf elftosb-1.1.0.tar.gz 

3)修改stdafx.h文件,#include"/usr/include/sys/types.h" 改成 #include"/usr/include/i386-linux-gnu/sys/types.h"

4)重新打包：

tar zcvf elftosb-1.1.0.tar.gz elftosb-1.1.0

5)rm -rf /opt/freescale/ltib/usr/src/rpm/BUILD/elftosb-1.1.0

6)./ltib -m config

执行通过,祝贺一下。

./ltib install 出错：

• /opt/freescale/usr/local/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/../lib/gcc/arm-fsl-linux-gnueabi/4.6.2/../../../../arm-fsl-linux-gnueabi/bin/ld: cannot find /lib/libc.so.6

  /opt/freescale/usr/local/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/../lib/gcc/arm-fsl-linux-gnueabi/4.6.2/../../../../arm-fsl-linux-gnueabi/bin/ld: cannot find /usr/lib/libc_nonshared.a

  /opt/freescale/usr/local/gcc-4.6.2-glibc-2.13-linaro-multilib-2011.12/fsl-linaro-toolchain/bin/../lib/gcc/arm-fsl-linux-gnueabi/4.6.2/../../../../arm-fsl-linux-gnueabi/bin/ld: cannot find /lib/ld-linux.so.3

  解决方法：

  编辑 ltib/dist/lfs-5.1/base_libs/base_libs.spec

  找到以下行

  perl -w -e '

   @ARGV = grep { `file $_` =~ m,ASCII C program text, } @ARGV

  exit(0) unless @ARGV;

  删除.“ @ARGV = grep { `file $_` =~ m,ASCII C program text, } @ARGV”以及"exit(0) unless @ARGV;"

  保存退出。