作者:gzshun. 原创作品,转载请标明出处!
说了这么多,该到执行命令的函数了,要不黄花菜都凉了。上一篇文章讲了vold如何开启接收framework下发命令的线程,最终到了runCommand函数的实现,总共有6个版本,由于重复性大,只讲VolumeCmd类的runCommand函数的实现。
VolumeCmd可以说是最重要的,该类的实现处理了list,debug,mount,unmount,format,unshare,shared等等操作,详细说明:
list: 在启动vold之后,接收的第一条命令就是list,这里是获取系统的所有磁盘对象,一般只有sd卡。
debug: 设置USB的调试模式
mount: 挂载磁盘
unmount: 卸载磁盘
format: 格式化磁盘
unshare: 关闭USB的大容量存储模式,相当于断开手机与电脑的连接
shared: 开启USB的大容量存储模式,相当于手机与电脑连接,并挂载在电脑
每次操作完成后,都要将操作结果汇报给framework,阶级负责工作,一定要把工作结果汇报给领导,这里使用了sendMsg函数。
1.搜索需要挂载的磁盘对象信息列表。先从listVolumes函数开始,贴源码:
这函数扫描了mVolumes容器,里面保存着从配置文件/etc/vold.fstab解析出来的磁盘。
该容器是在main函数中添加的:vm->addVolume(dv);
这函数先将每个磁盘的标签,挂载点,状态汇报给framework,然后再循环工作结束后,再次向领导汇报工作结束。
2.设置调试模式。贴源码:
每个Volume对象都有一个setDebug函数设置调试状态:
挂载磁盘涉及到很多内容和源码,将在下一篇文章继续说明,待续。。。
说了这么多,该到执行命令的函数了,要不黄花菜都凉了。上一篇文章讲了vold如何开启接收framework下发命令的线程,最终到了runCommand函数的实现,总共有6个版本,由于重复性大,只讲VolumeCmd类的runCommand函数的实现。
VolumeCmd可以说是最重要的,该类的实现处理了list,debug,mount,unmount,format,unshare,shared等等操作,详细说明:
list: 在启动vold之后,接收的第一条命令就是list,这里是获取系统的所有磁盘对象,一般只有sd卡。
debug: 设置USB的调试模式
mount: 挂载磁盘
unmount: 卸载磁盘
format: 格式化磁盘
unshare: 关闭USB的大容量存储模式,相当于断开手机与电脑的连接
shared: 开启USB的大容量存储模式,相当于手机与电脑连接,并挂载在电脑
下面把该函数的源码贴出来,一目了然,程序员,代码说话:
- int CommandListener::VolumeCmd::runCommand(SocketClient *cli,
- int argc, char **argv) {
- dumpArgs(argc, argv, -1);
- if (argc < 2) {
- cli->sendMsg(ResponseCode::CommandSyntaxError, "Missing Argument", false);
- return 0;
- }
- VolumeManager *vm = VolumeManager::Instance();
- int rc = 0;
- if (!strcmp(argv[1], "list")) {
- return vm->listVolumes(cli);
- } else if (!strcmp(argv[1], "debug")) {
- if (argc != 3 || (argc == 3 && (strcmp(argv[2], "off") && strcmp(argv[2], "on")))) {
- cli->sendMsg(ResponseCode::CommandSyntaxError, "Usage: volume debug <off/on>", false);
- return 0;
- }
- vm->setDebug(!strcmp(argv[2], "on") ? true : false);
- } else if (!strcmp(argv[1], "mount")) {
- if (argc != 3) {
- cli->sendMsg(ResponseCode::CommandSyntaxError, "Usage: volume mount <path>", false);
- return 0;
- }
- rc = vm->mountVolume(argv[2]);
- } else if (!strcmp(argv[1], "unmount")) {
- if (argc < 3 || argc > 4 || (argc == 4 && strcmp(argv[3], "force"))) {
- cli->sendMsg(ResponseCode::CommandSyntaxError, "Usage: volume unmount <path> [force]", false);
- return 0;
- }
- bool force = false;
- if (argc >= 4 && !strcmp(argv[3], "force")) {
- force = true;
- }
- rc = vm->unmountVolume(argv[2], force);
- } else if (!strcmp(argv[1], "format")) {
- if (argc != 3) {
- cli->sendMsg(ResponseCode::CommandSyntaxError, "Usage: volume format <path>", false);
- return 0;
- }
- rc = vm->formatVolume(argv[2]);
- } else if (!strcmp(argv[1], "share")) {
- if (argc != 4) {
- cli->sendMsg(ResponseCode::CommandSyntaxError,
- "Usage: volume share <path> <method>", false);
- return 0;
- }
- rc = vm->shareVolume(argv[2], argv[3]);
- } else if (!strcmp(argv[1], "unshare")) {
- if (argc != 4) {
- cli->sendMsg(ResponseCode::CommandSyntaxError,
- "Usage: volume unshare <path> <method>", false);
- return 0;
- }
- rc = vm->unshareVolume(argv[2], argv[3]);
- } else if (!strcmp(argv[1], "shared")) {
- bool enabled = false;
- if (argc != 4) {
- cli->sendMsg(ResponseCode::CommandSyntaxError,
- "Usage: volume shared <path> <method>", false);
- return 0;
- }
- if (vm->shareEnabled(argv[2], argv[3], &enabled)) {
- cli->sendMsg(
- ResponseCode::OperationFailed, "Failed to determine share enable state", true);
- } else {
- cli->sendMsg(ResponseCode::ShareEnabledResult,
- (enabled ? "Share enabled" : "Share disabled"), false);
- }
- return 0;
- } else {
- cli->sendMsg(ResponseCode::CommandSyntaxError, "Unknown volume cmd", false);
- }
- if (!rc) {
- cli->sendMsg(ResponseCode::CommandOkay, "volume operation succeeded", false);
- } else {
- int erno = errno;
- rc = ResponseCode::convertFromErrno();
- cli->sendMsg(rc, "volume operation failed", true);
- }
- return 0;
- }
每次操作完成后,都要将操作结果汇报给framework,阶级负责工作,一定要把工作结果汇报给领导,这里使用了sendMsg函数。
1.搜索需要挂载的磁盘对象信息列表。先从listVolumes函数开始,贴源码:
- int VolumeManager::listVolumes(SocketClient *cli) {
- VolumeCollection::iterator i;
- for (i = mVolumes->begin(); i != mVolumes->end(); ++i) {
- char *buffer;
- asprintf(&buffer, "%s %s %d",
- (*i)->getLabel(), (*i)->getMountpoint(),
- (*i)->getState());
- cli->sendMsg(ResponseCode::VolumeListResult, buffer, false);
- free(buffer);
- }
- cli->sendMsg(ResponseCode::CommandOkay, "Volumes listed.", false);
- return 0;
- }
这函数扫描了mVolumes容器,里面保存着从配置文件/etc/vold.fstab解析出来的磁盘。
该容器是在main函数中添加的:vm->addVolume(dv);
这函数先将每个磁盘的标签,挂载点,状态汇报给framework,然后再循环工作结束后,再次向领导汇报工作结束。
2.设置调试模式。贴源码:
- void VolumeManager::setDebug(bool enable) {
- mDebug = enable;
- VolumeCollection::iterator it;
- for (it = mVolumes->begin(); it != mVolumes->end(); ++it) {
- (*it)->setDebug(enable);
- }
- }
每个Volume对象都有一个setDebug函数设置调试状态:
- void Volume::setDebug(bool enable) {
- mDebug = enable;
- }
挂载磁盘涉及到很多内容和源码,将在下一篇文章继续说明,待续。。。