Android之px、dp、sp之间相互转换

在做Android的UI开发时，通常会用到三种度量单位——px、dp和sp。其中：

px：pixels，像素。不同设备显示效果相同。
dp（dip）：device independent pixels，设备独立像素。 不同设备有不同的显示效果，和设备硬件有关，不依赖像素。如果设置表示长度、高度等属性时可以使用dp，与密度无关
sp：scaled pixels，放大像素。主要用于字体显示（best for textsize）。设置字体，需要使用sp，sp除了与密度无关外，还与scale无关。

px、dp和sp之间的相互转换如下：

    /** 
     * 将px值转换为dp(dip)值，保证尺寸大小不变 
     *  
     * @param pxValue 
     * @param scale （DisplayMetrics类中属性density） 
     * @return 
     */  
    public static int px2dip(Context context, float pxValue) {  
        final float scale = context.getResources().getDisplayMetrics().density;  
        return (int) (pxValue / scale + 0.5f);  
    }  

    /** 
     * 将px值转换为sp值，保证文字大小不变 
     *  
     * @param pxValue 
     * @param fontScale （DisplayMetrics类中属性scaledDensity） 
     * @return 
     */  
    public static int px2sp(Context context, float pxValue) {  
        final float fontScale = context.getResources().getDisplayMetrics().scaledDensity;  
        return (int) (pxValue / fontScale + 0.5f);  
    } 

    /** 
     * 将dp(dip)值转换为px值，保证尺寸大小不变 
     *  
     * @param dipValue 
     * @param scale（DisplayMetrics类中属性density） 
     * @return 
     */  
    public static int dip2px(Context context, float dipValue) {  
        final float scale = context.getResources().getDisplayMetrics().density;  
        return (int) (dipValue * scale + 0.5f);  
    }  

    /** 
     * 将sp值转换为px值，保证文字大小不变 
     *  
     * @param spValue 
     * @param fontScale （DisplayMetrics类中属性scaledDensity） 
     * @return 
     */  
    public static int sp2px(Context context, float spValue) {  
        final float fontScale = context.getResources().getDisplayMetrics().scaledDensity;  
        return (int) (spValue * fontScale + 0.5f);  
    }  

其中在DisplayMetrics类中属性density如下定义：

    /**
     * The logical density of the display.  This is a scaling factor for the
     * Density Independent Pixel unit, where one DIP is one pixel on an
     * approximately 160 dpi screen (for example a 240x320, 1.5"x2" screen), 
     * providing the baseline of the system's display. Thus on a 160dpi screen 
     * this density value will be 1; on a 120 dpi screen it would be .75; etc.
     *  
     * <p>This value does not exactly follow the real screen size (as given by 
     * {@link #xdpi} and {@link #ydpi}, but rather is used to scale the size of
     * the overall UI in steps based on gross changes in the display dpi.  For 
     * example, a 240x320 screen will have a density of 1 even if its width is 
     * 1.8", 1.3", etc. However, if the screen resolution is increased to 
     * 320x480 but the screen size remained 1.5"x2" then the density would be 
     * increased (probably to 1.5).
     *
     * @see #DENSITY_DEFAULT
     */
    public float density;

在DisplayMetrics类中属性scaledDensity如下定义：

    /**
     * A scaling factor for fonts displayed on the display.  This is the same
     * as {@link #density}, except that it may be adjusted in smaller
     * increments at runtime based on a user preference for the font size.
     */
    public float scaledDensity;