freescale linux源码,跨界单片机NXP i.mx-rt1050 uclinux源码哪儿可以下载？

在官方EVK板上跑了个demo镜像:

https://emcraft.com/products/819#overview

U-Boot 2017.09-rc1-cortexm-2.5.0 (Oct 17 2017 - 01:47:42 +0300)

CPU: i.MX RT105x at 600MHz

Model: NXP i.RT1050 EVK

DRAM:  32 MiB

MMC:   FSL_SDHC: 0

reading uboot.env

Video: 480x272x24

In:    serial@40184000

Out:   serial@40184000

Err:   serial@40184000

Net:   eth0: ethernet@402D8000

reading splash-rt1050-series_24.bmp

391736 bytes read in 109 ms (3.4 MiB/s)

reading mxrt105x-evk.ini

100 bytes read in 11 ms (8.8 KiB/s)

fatexec: 'setenv ipaddr 192.168.1.251'

fatexec: 'setenv netmask 255.255.0.0'

Hit any key to stop autoboot:  0

reading rootfs.uImage

7684098 bytes read in 1754 ms (4.2 MiB/s)

## Booting kernel from Legacy Image at 80007fc0 ...

Image Name:   Linux-4.5.0-00417-g1e71634a15d7-

Image Type:   ARM Linux Multi-File Image (uncompressed)

Data Size:    7684034 Bytes = 7.3 MiB

Load Address: 80008000

Entry Point:  80008001

Contents:

Image 0: 7674368 Bytes = 7.3 MiB

Image 1: 9654 Bytes = 9.4 KiB

Verifying Checksum ... OK

## Flattened Device Tree from multi component Image at 80007FC0

Booting using the fdt at 0x80759a0c

Loading Multi-File Image ... OK

Loading Device Tree to 81e77000, end 81e7c5b5 ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0

Linux version 4.5.0-00417-g1e71634a15d7-dirty (yur@linux-7d45) (gcc version 4.7.4 20130508 (prerelease) (20170818-165657- build on build.emcraft by build) ) #151 Sun Oct 15 15:50:07 MSK 2017

CPU: ARMv7-M [411fc271] revision 1 (ARMv7M), cr=00000000

CPU: WBA data cache, WBA instruction cache

Machine model: NXP IMXRT1050 board

debug: ignoring loglevel setting.

On node 0 totalpages: 8192

free_area_init_node: node 0, pgdat 80759320, node_mem_map 81ec0000

Normal zone: 64 pages used for memmap

Normal zone: 0 pages reserved

Normal zone: 8192 pages, LIFO batch:0

pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

pcpu-alloc: [0] 0

Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 8128

Kernel command line: console=ttyLP0,115200 consoleblank=0 ignore_loglevel ip=192.168.1.251:172.17.0.1::255.255.0.0::eth0:off

PID hash table entries: 128 (order: -3, 512 bytes)

Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)

Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)

Memory: 23792K/32768K available (2188K kernel code, 118K rwdata, 360K rodata, 4824K init, 95K bss, 8976K reserved, 0K cma-reserved)

Virtual kernel memory layout:

vector  : 0x00000000 - 0x00001000   (   4 kB)

fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

vmalloc : 0x00000000 - 0xffffffff   (4095 MB)

lowmem  : 0x80000000 - 0x82000000   (  32 MB)

.text : 0x80008000 - 0x8028531c   (2549 kB)

.init : 0x80286000 - 0x8073c000   (4824 kB)

.data : 0x8073c000 - 0x80759a00   ( 119 kB)

.bss : 0x80759a00 - 0x807719f8   (  96 kB)

NR_IRQS:16 nr_irqs:16 16

sched_clock: 32 bits at 75MHz, resolution 13ns, wraps every 28633115129ns

clocksource: vf-pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 25483472618 ns

Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)

pid_max: default: 4096 minimum: 301

Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

devtmpfs: initialized

clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

pinctrl core: initialized pinctrl subsystem

NET: Registered protocol family 16

mxs_phy 400d9000.usbphy: Invalid GPIO: -2

mxs_phy 400da000.usbphy: Invalid GPIO: -2

imxrt105x-pinctrl 401f8000.iomuxc: initialized IMX pinctrl driver

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

pps_core: LinuxPPS API ver. 1 registered

pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti

PTP clock support registered

clocksource: Switched to clocksource vf-pit

NET: Registered protocol family 2

TCP established hash table entries: 1024 (order: 0, 4096 bytes)

TCP bind hash table entries: 1024 (order: 0, 4096 bytes)

TCP: Hash tables configured (established 1024 bind 1024)

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

futex hash table entries: 16 (order: -5, 192 bytes)

fuse init (API version 7.24)

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

io scheduler noop registered

io scheduler cfq registered (default)

mxsfb 402b8000.lcdif: initialized

40184000.serial: ttyLP0 at MMIO 0x40184000 (irq = 44, base_baud = 375000) is a FSL_LPUART

console [ttyLP0] enabled

Serial: VF610 driver

libphy: fec_enet_mii_bus: probed

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ehci-mxc: Freescale On-Chip EHCI Host driver

usbcore: registered new interface driver uas

usbcore: registered new interface driver usb-storage

ci_hdrc ci_hdrc.1: EHCI Host Controller

ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1

ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

g_serial gadget: Gadget Serial v2.4

g_serial gadget: g_serial ready

i2c /dev entries driver

ft5x0x_ts 0-0038: resolution: 479x271

ft5x0x_ts 0-0038: Operating withoug nReset pin (-2)

input: ft5x0x_ts as /devices/virtual/input/input0

ft5x0x_ts 0-0038: fft5x0x_i2c_Read: i2c read error.

[FTS] Firmware version = 0x1b

ft5x0x_ts 0-0038: fft5x0x_i2c_Read: i2c read error.

[FTS] report rate is 270Hz.

ft5x0x_ts 0-0038: fft5x0x_i2c_Read: i2c read error.

[FTS] touch threshold is 108.

i2c i2c-0: LPI2C adapter registered

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

sdhci-pltfm: SDHCI platform and OF driver helper

sdhci-esdhc-imx 402c0000.esdhc: could not get default state

/soc/aips-bus@40000000/esdhc@402c0000: voltage-ranges unspecified

mmc0: SDHCI controller on 402c0000.esdhc [402c0000.esdhc] using DMA

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

NET: Registered protocol family 10

sit: IPv6 over IPv4 tunneling driver

input: gpio-keys as /devices/platform/gpio-keys/input/input1

Freeing unused kernel memory: 4824K (80286000 - 8073c000)

init started: BusyBox v1.24.2 (2017-10-12 12:11:53 MSK)

mmc0: host does not support reading read-only switch, assuming write-enable

mmc0: new high speed SDHC card at address b368

mmcblk0: mmc0:b368 NCard 3.74 GiB

mmcblk0: p1

FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

random: dropbear urandom read with 5 bits of entropy available

/ # Micrel KSZ8081 or KSZ8091 402d8000.etherne:02: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=402d8000.etherne:02, irq=-1)

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

/ #

/ # fec 402d8000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx

IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

/ #

/ # ls

bin        etc        lib        root       tmp

crankdemo  httpd      mnt        sbin       usr

dev        init       proc       sys        var

/ #