转载:关于RAID--Build/Verify&Clear&Quick
Init众说
1. Quick Init:产生阵列不做初始化
Clear: 向所有阵列成员写0
Build: 从原盘拷贝数据到目标盘
2. Build/Verify 是在创建RAID时创建并校验RAID信息。
Clear 是创建时清空所有数据
Quick Init 是创建时执行快速初始化
3. Build - Copies data from a source drive to a target drive.
This option can be used to upgrade a single drive configuration to
a RAID1 configuration.
Clear - This option creates the array and writes zeroes to all the
hard drives in the array. Do not select this option if any of the
selected hard drives contain unrecoverable data.
Quick Init - Creates the array without initializing or overwriting
any data on the selected hard drives. This option can be used if
the configuration on the HostRAID controller has been cleared or if
you have known good configuration written on the hard drives. (If
you chose Quick Init, the following message appears: “Creating a
RAID-x using Quick Init may require you to run a VERIFY W/FIX using
OS utility to make drives consistent.” )
4.
a. Build,创建阵列,选择这项后,系统会提示“Select Source
Drive”,通过键选择源盘后,另外一块硬盘即为目标盘。回车后,系统提示是否继续,选择YES后继续,出现阵列build界面,建议用户等系统做完build后再进行下一步操作。
b. Clear,初始化阵列,此操作会将硬盘上所有数据写零。阵列必须等Clear任务完成后才能使用。
c. Quick
Init,快速初始化,只对写入的数据作保护。这项功能需要在操作系统下使用管理软件进行校验工作,以保证。
5. Build Creating a RAID 1 array when you want to preserve data
on an existing drive. If you select this option, you are asked to
designate the source drive. The contents of the source drive are
prese