在安装CentOS7后，遇到网卡未被系统识别的问题。通过`lspci -vvv`命令查看硬件信息，显示NVIDIA Corporation MCP61系列的南桥和PCI设备，但没有发现网卡。可能的原因是驱动未安装或配置错误。需要进一步排查驱动和配置以解决网卡识别问题。
$ lspci -vvv00:00.0RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-
00:01.0ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-
Region4: I/O ports at 0600 [size=64]
Region5: I/O ports at 0700 [size=64]
Capabilities:Kernel driverinuse: nForce2_smbus00:01.2RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) (prog-if 10[OHCI])
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-
Interrupt: pin A routed to IRQ23Region0: Memory at dbffb000 (32-bit, non-prefetchable) [size=4K]
Capabilities:Kernel driverin use: ohci-pci00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) (prog-if 20[EHCI])
Subsystem: ASUSTeK Computer Inc. M4N68T series motherboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-
Interrupt: pin B routed to IRQ22Region0: Memory at dbffac00 (32-bit, non-prefetchable) [size=256]
Capabilities:Kernel driverin use: ehci-pci00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) (prog-if 01[Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-
Memory behind bridge: fff00000-000
最低0.47元/天 解锁文章
扫一扫
753
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
