linux内核鼠标配置,linux开启鼠标驱动和qt鼠标支持

内核开启配置

在此之前，保证USB主设备驱动已经开启了

Dvice Driver–» HID Support–»USB HID Support

设置成功后，接入鼠标，显示如下。

[Webee210]\# usb 1-1: USB disconnect, device number 2

usb 1-1: new low-speed USB device number 3 using s5p-ohci

usb 1-1: New USB device found, idVendor=093a, idProduct=2510

usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

usb 1-1: Product: USB Optical Mouse

usb 1-1: Manufacturer: PixArt

input: PixArt USB Optical Mouse as /devices/platform/s5p-ohci/usb1/1-1/1-1:1.0/input/input2

hid-generic 0003:093A:2510.0002: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-s5p-ohci-1/input0

qt支持鼠标和触摸屏

在/ect/profile中配置这句话，其中，/dev/mouse0为插入的鼠标设备节点。

export QWS_MOUSE_PROTO=”intelliMouse:/dev/mouse0 tslib:/dev/event0”

注意：要使qt先支持鼠标，在开机之前，启动qt程序之前就需要把鼠标设备接入到开发板中