linux bad address,linux – ifconfig：坏地址’-apbridge’

我需要在OpenWRT路由器中配置网络接口.因此我需要更改/ etc / config / network文件中的一些选项.特别是我想删除桥接连接.我在shell上尝试了以下每个命令：

ifconfig lan -apbridge

ifconfig eth0 -apbridge

每个命令输出是：

ifconfig: bad address '-apbridge'

我也试过这些：

ifconfig lan type -apbridge

ifconfig eth0 type -apbridge

每个命令输出是：

ifconfig: bad address 'type'

我知道我可以使用nano编辑器直接从文件中删除选项,但在我的情况下,这是不切实际的.我需要从命令行中删除桥接连接..

我怎么能这样做..谢谢

解决方法:

试试brctl ……

root@ap5:~# brctl --help

BusyBox v1.19.4 (2013-03-14 11:28:31 UTC) multi-call binary.

Usage: brctl COMMAND [BRIDGE [INTERFACE]]

Manage ethernet bridges

Commands:

show Show a list of bridges

addbr BRIDGE Create BRIDGE

delbr BRIDGE Delete BRIDGE

addif BRIDGE IFACE Add IFACE to BRIDGE

delif BRIDGE IFACE Delete IFACE from BRIDGE

setageing BRIDGE TIME Set ageing time

setfd BRIDGE TIME Set bridge forward delay

sethello BRIDGE TIME Set hello time

setmaxage BRIDGE TIME Set max message age

setpathcost BRIDGE COST Set path cost

setportprio BRIDGE PRIO Set port priority

setbridgeprio BRIDGE PRIO Set bridge priority

stp BRIDGE [1/yes/on|0/no/off] STP on/off

root@ap5:~# brctl show

bridge name bridge id STP enabled interfaces

br-lan 8000.deadc0decafe no eth0

wlan0

…使用’delif’你可以从桥上拔掉不需要的接口.

如果版本重要：这些行来自“ATTITUDE ADJUSTMENT(12.09,r36088)” – 框.

标签：openwrt,linux

来源： https://codeday.me/bug/20190815/1660979.html