pn_eegPLV
所属分类:其他
开发工具:matlab
文件大小:2KB
下载次数:23
上传日期:2019-04-23 20:00:42
上 传 者:wfffffff
说明: 计算EEG数据集的锁相值(PLV)。
%
%输入参数:
eegData是3D矩阵numChannels x numTimePoints x numTrials srate是EEG数据的采样率filtSpec是用于在期望的感兴趣频带中过滤EEG信号的滤波器规范。 它是一个具有两个字段的结构,顺序和范围。
范围指定频带的限制,例如,对于伽马频带,使用filtSpec.range = [35 45]。 在filtSpec.order中指定FIR滤波器的顺序。 一个有用的经验法则可以包括约4到5个周期的所需信号。 例如,对于以500Hz采样的eeg数据,filtSpec.order = 50对应于100ms并且包含~4个周期的γ波段(40Hz)。
(Computes the Phase Locking Value (PLV) for an EEG dataset.
%
% Input parameters:
% eegData is a 3D matrix numChannels x numTimePoints x numTrials
% srate is the sampling rate of the EEG data
% filtSpec is the filter specification to filter the EEG signal in the
% desired frequency band of interest. It is a structure with two
% fields, order and range.
% Range specifies the limits of the frequency
% band, for example, put filtSpec.range = [35 45] for gamma band.
% Specify the order of the FIR filter in filtSpec.order. A useful
% rule of thumb can be to include about 4 to 5 cycles of the desired
% signal. For example, filtSpec.order = 50 for eeg data sampled at
% 500 Hz corresponds to 100 ms and contains ~4 cycles of gamma band
% (40 Hz).)
文件列表:[举报垃圾]
pn_eegPLV.m, 4698 , 2011-05-29
license.txt, 1316 , 2014-02-12
近期下载者:
相关文件:
收藏者: