keil c语言位运算,c51按位运算符

最新推荐文章于 2024-01-13 10:07:38 发布

gfyy2555

最新推荐文章于 2024-01-13 10:07:38 发布

阅读量1.3k

点赞数

文章标签： keil c语言位运算

#include #include unsigned moveright(unsigned value, int n);

unsigned moveleft(unsigned value, int n);

main()

{

unsigned a;

int n;

SCON = 0x50;

TMOD |= 0x20;

TH1 = 0xf3;

TR1 = 1;

TI = 1;

printf("请数入一个8进制数：");

scanf("%o", &a);

printf("请输入要位移的位数：");

scanf("%d", &n);

if(n>0)

{

printf("循环右移的结果为：%o\n", moveright(a,n));

}

else

{

n=-n;

printf("循环左移的结果为：%o\n", moveleft(a,n));

}

unsigned moveright(unsigned value, int n) //循环右移

{

unsigned z;

z=(value>>n)|(value

}

unsigned moveleft(unsigned value, int n) //循环左移

{

unsigned z;

z=(value<>(16-n));

return z;

}

/*--------------------------------------------------------------------------

STDIO.H

Prototypes for standard I/O functions.

--------------------------------------------------------------------------*/

#ifndef __STDIO_H__

#define __STDIO_H__

#ifndef EOF

#define EOF -1

#endif

#ifndef NULL

#define NULL ((void *) 0)

#endif

#ifndef _SIZE_T

#define _SIZE_T

typedef unsigned int size_t;

#endif

#pragma SAVE

#pragma REGPARMS

extern char _getkey (void);

extern char getchar (void);

extern char ungetchar (char);

extern char putchar (char);

extern int printf (const char *, ...);

extern int sprintf (char *, const char *, ...);

extern int vprintf (const char *, char *);

extern int vsprintf (char *, const char *, char *);

extern char *gets (char *, int n);

extern int scanf (const char *, ...);

extern int sscanf (char *, const char *, ...);

extern int puts (const char *);

#pragma RESTORE

#endif

/*--------------------------------------------------------------------------

REG51.H

Header file for generic 80C51 and 80C31 microcontroller.

--------------------------------------------------------------------------*/

#ifndef __REG51_H__

#define __REG51_H__

/* BYTE Register */

sfr P0 = 0x80;

sfr P1 = 0x90;

sfr P2 = 0xA0;

sfr P3 = 0xB0;

sfr PSW = 0xD0;

sfr ACC = 0xE0;

sfr B = 0xF0;

sfr SP = 0x81;

sfr DPL = 0x82;

sfr DPH = 0x83;

sfr PCON = 0x87;

sfr TCON = 0x88;

sfr TMOD = 0x89;

sfr TL0 = 0x8A;

sfr TL1 = 0x8B;

sfr TH0 = 0x8C;

sfr TH1 = 0x8D;

sfr IE = 0xA8;

sfr IP = 0xB8;

sfr SCON = 0x98;

sfr SBUF = 0x99;

/* BIT Register */

/* PSW */

sbit CY = 0xD7;

sbit AC = 0xD6;

sbit F0 = 0xD5;

sbit RS1 = 0xD4;

sbit RS0 = 0xD3;

sbit OV = 0xD2;

sbit P = 0xD0;

/* TCON */

sbit TF1 = 0x8F;

sbit TR1 = 0x8E;

sbit TF0 = 0x8D;

sbit TR0 = 0x8C;

sbit IE1 = 0x8B;

sbit IT1 = 0x8A;

sbit IE0 = 0x89;

sbit IT0 = 0x88;

/* IE */

sbit EA = 0xAF;

sbit ES = 0xAC;

sbit ET1 = 0xAB;

sbit EX1 = 0xAA;

sbit ET0 = 0xA9;

sbit EX0 = 0xA8;

/* IP */

sbit PS = 0xBC;

sbit PT1 = 0xBB;

sbit PX1 = 0xBA;

sbit PT0 = 0xB9;

sbit PX0 = 0xB8;

/* P3 */

sbit RD = 0xB7;

sbit WR = 0xB6;

sbit T1 = 0xB5;

sbit T0 = 0xB4;

sbit INT1 = 0xB3;

sbit INT0 = 0xB2;

sbit TXD = 0xB1;

sbit RXD = 0xB0;

/* SCON */

sbit SM0 = 0x9F;

sbit SM1 = 0x9E;

sbit SM2 = 0x9D;

sbit REN = 0x9C;

sbit TB8 = 0x9B;

sbit RB8 = 0x9A;

sbit TI = 0x99;

sbit RI = 0x98;

#endif

$NOMOD51

;------------------------------------------------------------------------------

; This file is part of the C51 Compiler package

;------------------------------------------------------------------------------

; STARTUP.A51: This code is executed after processor reset.

;

; To translate this file use A51 with the following invocation:

;

; A51 STARTUP.A51

;

; To link the modified STARTUP.OBJ file to your application use the following

; BL51 invocation:

;

; BL51 , STARTUP.OBJ ;

;------------------------------------------------------------------------------

;

; User-defined Power-On Initialization of Memory

;

; With the following EQU statements the initialization of memory

; at processor reset can be defined:

;

; ; the absolute start-address of IDATA memory is always 0

IDATALEN EQU 80H ; the length of IDATA memory in bytes.

;

XDATASTART EQU 0H ; the absolute start-address of XDATA memory

XDATALEN EQU 0H ; the length of XDATA memory in bytes.

;

PDATASTART EQU 0H ; the absolute start-address of PDATA memory

PDATALEN EQU 0H ; the length of PDATA memory in bytes.

;

; Notes: The IDATA space overlaps physically the DATA and BIT areas of the

; 8051 CPU. At minimum the memory space occupied from the C51

; run-time routines must be set to zero.

;------------------------------------------------------------------------------

;

; Reentrant Stack Initilization

;

; The following EQU statements define the stack pointer for reentrant

; functions and initialized it:

;

; Stack Space for reentrant functions in the SMALL model.

IBPSTACK EQU 0 ; set to 1 if small reentrant is used.

IBPSTACKTOP EQU 0FFH+1 ; set top of stack to highest location+1.

;

; Stack Space for reentrant functions in the LARGE model.

XBPSTACK EQU 0 ; set to 1 if large reentrant is used.

XBPSTACKTOP EQU 0FFFFH+1; set top of stack to highest location+1.

;

; Stack Space for reentrant functions in the COMPACT model.

PBPSTACK EQU 0 ; set to 1 if compact reentrant is used.

PBPSTACKTOP EQU 0FFFFH+1; set top of stack to highest location+1.

;

;------------------------------------------------------------------------------

;

; Page Definition for Using the Compact Model with 64 KByte xdata RAM

;

; The following EQU statements define the xdata page used for pdata

; variables. The EQU PPAGE must conform with the PPAGE control used

; in the linker invocation.

;

PPAGEENABLE EQU 0 ; set to 1 if pdata object are used.

;

PPAGE EQU 0 ; define PPAGE number.

;

PPAGE_SFR DATA 0A0H ; SFR that supplies uppermost address byte

; (most 8051 variants use P2 as uppermost address byte)

;

;------------------------------------------------------------------------------

; Standard SFR Symbols

ACC DATA 0E0H

B DATA 0F0H

SP DATA 81H

DPL DATA 82H

DPH DATA 83H

NAME ?C_STARTUP

?C_C51STARTUP SEGMENT CODE

?STACK SEGMENT IDATA

RSEG ?STACK

DS 1

EXTRN CODE (?C_START)

PUBLIC ?C_STARTUP

CSEG AT 0

?C_STARTUP: LJMP STARTUP1

RSEG ?C_C51STARTUP

STARTUP1:

IF IDATALEN <> 0

MOV R0,#IDATALEN - 1

CLR A

IDATALOOP: MOV @R0,A

DJNZ R0,IDATALOOP

ENDIF

IF XDATALEN <> 0

MOV DPTR,#XDATASTART

MOV R7,#LOW (XDATALEN)

IF (LOW (XDATALEN)) <> 0

MOV R6,#(HIGH (XDATALEN)) +1

ELSE

MOV R6,#HIGH (XDATALEN)

ENDIF

CLR A

XDATALOOP: MOVX @DPTR,A

INC DPTR

DJNZ R7,XDATALOOP

DJNZ R6,XDATALOOP

ENDIF

IF PPAGEENABLE <> 0

MOV PPAGE_SFR,#PPAGE

ENDIF

IF PDATALEN <> 0

MOV R0,#LOW (PDATASTART)

MOV R7,#LOW (PDATALEN)

CLR A

PDATALOOP: MOVX @R0,A

INC R0

DJNZ R7,PDATALOOP

ENDIF

IF IBPSTACK <> 0

EXTRN DATA (?C_IBP)

MOV ?C_IBP,#LOW IBPSTACKTOP

ENDIF

IF XBPSTACK <> 0

EXTRN DATA (?C_XBP)

MOV ?C_XBP,#HIGH XBPSTACKTOP

MOV ?C_XBP+1,#LOW XBPSTACKTOP

ENDIF

IF PBPSTACK <> 0

EXTRN DATA (?C_PBP)

MOV ?C_PBP,#LOW PBPSTACKTOP

ENDIF

MOV SP,#?STACK-1

; This code is required if you use L51_BANK.A51 with Banking Mode 4

; EXTRN CODE (?B_SWITCH0)

; CALL ?B_SWITCH0 ; init bank mechanism to code bank 0

LJMP ?C_START

END

keil c语言 位运算,c51按位运算符

keil c语言位运算,c51按位运算符