HTTP性能测试

HTTP性能测试

web性能测试的方法请参考此连接说明：http://www.xenoclast.org/doc/benchmark/

1. httperf

ftp://ftp.hpl.hp.com/pub/httperf/ 下载
解压然后安装，执行程序在安装目录下的src目录中

./httperf –server 192.168.210.155 –port 10002 –uri /index.html –rate 300 –num-conn 30000 –num-call 1 –timeout 5*

−−num−calls=_It specifies the total number of calls to issue on each connection before closing it
−−num−connsthe total number of connections to create

---

httperf: warning: open file limit > FD_SETSIZE; limiting max. # of open files to FD_SETSIZE

Maximum connect burst length: 51

Total: connections 30000 requests 30000 replies 30000 test-duration 100.004 s

Connection rate: 300.0 conn/s (3.3 ms/conn, <=52 concurrent connections)
Connection time [ms]: min 0.5 avg 3.5 max 113.7 median 3.5 stddev 4.6
Connection time [ms]: connect 1.2
Connection length [replies/conn]: 1.000

Request rate: 300.0 req/s (3.3 ms/req)
Request size [B]: 78.0

Reply rate [replies/s]: min 290.2 avg 300.0 max 309.8 stddev 3.3 (19 samples)
Reply time [ms]: response 2.3 transfer 0.1
Reply size [B]: header 238.0 content 612.0 footer 0.0 (total 850.0)
Reply status: 1xx=0 2xx=30000 3xx=0 4xx=0 5xx=0

CPU time [s]: user 52.07 system 47.29 (user 52.1% system 47.3% total 99.4%)
Net I/O: 271.9 KB/s (2.2*10^6 bps)

Errors: total 0 client-timo 0 socket-timo 0 connrefused 0 connreset 0
Errors: fd-unavail 0 addrunavail 0 ftab-full 0 other 0

total: 表示总体情况
Connection：tcp 连接的相关统计信息，Connection length可能>1（由于persistent-connections）
Request rate：HTTP报文的发送统计信息
Reply rate： time表示发送第一个包到接收第一个包的时间， transfer表示读取接收报文的时间

2.autobench

对httperf进行了封装，不仅仅只测试一个条件的结果，可以连续增加测试量，从而测试出性能的瓶颈
下载地址： http://www.xenoclast.org/autobench/

默认的配置文件如下所示：
more autobench.conf

注意: 一定要将配置文件copy到所用用户的家目录下，因此程序执行需要读取这个文件；安装后默认在/usr/local/etc/autobench.conf

1. # Autobench Configuration File
3. # host1, host2
4. # The hostnames of the servers under test
5. # Eg. host1 = iis.test.com
6. # host2 = apache.test.com
8. host1 = testhost1
9. host2 = testhost2
11. # uri1, uri2
12. # The URI to test (relative to the document root). For a fair comparison
13. # the files should be identical (although the paths to them may differ on the
14. # different hosts)
16. uri1 = /
17. uri2 = /
19. # port1, port2
20. # The port number on which the servers are listening
22. port1 = 80
23. port2 = 80
25. # low_rate, high_rate, rate_step
26. # The 'rate' is the number of number of connections to open per second.
27. # A series of tests will be conducted, starting at low rate,
28. # increasing by rate step, and finishing at high_rate.
29. # The default settings test at rates of 20,30,40,50...180,190,200
31. low_rate = 20
32. high_rate = 200
33. rate_step = 10
35. # num_conn, num_call
36. # num_conn is the total number of connections to make during a test
37. # num_call is the number of requests per connection
38. # The product of num_call and rate is the the approximate number of
39. # requests per second that will be attempted.
41. num_conn = 5000
42. num_call = 10
44. # timeout sets the maximimum time (in seconds) that httperf will wait
45. # for replies from the web server. If the timeout is exceeded, the
46. # reply concerned is counted as an error.
48. timeout = 5
50. # output_fmt
51. # sets the output type - may be either "csv", or "tsv";
53. output_fmt = tsv
55. ## Config for distributed autobench (autobench_admin)
56. # clients
57. # comma separated list of the hostnames and portnumbers for the
58. # autobench clients. No whitespace can appear before or after the commas.
59. # clients = bench1.foo.com:4600,bench2.foo.com:4600,bench3.foo.com:4600
61. clients = localhost:4600

执行测试命令
./autobench –single_host –host1 192.168.210.155 –port1 10002 –uri1 /index.html –quiet –low_rate 20 –high_rate 200 –rate_step 20 –num_call 10 –num_conn 5000 –timeout 5 –file results.tsv

httperf: warning: open file limit > FD_SETSIZE; limiting max. # of open files to FD_SETSIZE

如果不添加参数，则默认使用配置文件中的参数

最后的结果是tsv格式的文件，可以使用1.10版本后自带的工具，通过gnuplot画图得出图形结果

bench2graph takes a TSV format autobench results file, and uses gnuplot to graph the results, producing output in Postscript.
注意生成的图片格式是Postscript

./bench2graph results-1.tsv results-1.ps

windows下建议使用 GhostView来打开图片

来自为知笔记(Wiz)

附件列表

 

转载于:https://www.cnblogs.com/roni/p/5774923.html