V2.27 VAS 5054A ODIS FAQ and new Functions

Here comes the newest VAS 5054A ODIS V2.27 at wobd2.com.

 

VAS 5054A FAQ:
Q: I want to clear the fault code for ABS and airbag for my VW, Audi, Seat, the VAS 5054A is ok?
A: Yes, you can use this item.

Q: What's the function of the oki chip inside the VAS 5054A?
A: Support PWM and UDS protocol.

Q: Does the VAS 5054A Scanner work on gearbox of vw crafter 2009?
A: Yes, it does.

Q: There are two software in the package, VAS and IDOS, can i install the software in one computer?
A: Please install it on different computer. VAS is for old car models, IDOS is used for diagnose new car models.
You can install the software based on your needs. We try to install the software on same computer,but find they have influence for each other.

Q: Can i install lexia 3 software and this VAS 5054A software in the same computer?
A: Better do not. We test it, but failed. Because they will have influece for each. Such as if you install vas software on computer and you can diagnose VW models successfully,if you install lexia 3 software on the same computer, you test the same VW model, you will find you cannot diagnose.
This two software will have influence for each, so do not install them on the same computer.

Q: What is the range of bluetooth?
A: 2-5 Meters. There should not be any influence.

Q: VAS 5054A and another device Super VAG K Can V4.6, both of them can work on VW models, which one is better?
A: VAS 5054A is used for diagnose, diagnose function is better, need to work together with computer; and vag k can is used for change the mileage, mileage changing function is better.Work along. Some function are the same, such as service reset function.

Q: Can i use this VAS5054A to disable some functions? Like immobilizer?
A: No. This one has the same method as the original. It can be used to fix the broken system, not disable.

 

What’s new in ODIS V2.27:
1 estimated remaining time is displayed for ECU flash operation.
2 Diagnostic protocols contain the disruption of GFF session, extended measurement value, improve,communication ECU watch,
3 Using the hardware diagnostics, hardware diagnostic connection, OS, hotfixes use and submissions of requests for assistance
4 measured value display has been improved.
5 document in GFF is displayed in a separate window.
6 a message box will be displayed at the beginning of the test drive mode.
7 GFF hotfix can be integrated in the diagnostic session.
8 Dangerous message has been modified.
9 stop the diagnostic session may be interrupted.
10 automatic deletion of automatic saving diagnostic protocol after successful transmission.
11 passthru selecting hardware diagnostics has improved.
12 ODIS software update service was unstable.

 

转载于:https://www.cnblogs.com/mywobd2/p/5069395.html