http://blog.csdn.net/wb4916/article/details/78031511
BPI-M1P（全志A20）刷Android启动卡之后启动的过程
BPI-M1P（全志A20）刷Android启动卡之后启动的过程
2017/9/19 16:48
1、将16GB的class-10速的TF（最少8GB）卡插入读卡器之后插入到Win7电脑上。
2、通过全志的工具APST下载：卡量产烧录工具PhoenixCardV4.1.1没有外层目录.zip（终端客户可以找代理商/方案公司要）
PhoenixCard 软件用于将待量产的固件通过 SD 卡读卡器写入 SD 卡中。用户可以选择不同的模式将SD卡烧写成量产模式或者是启动模式，烧写完成后可以用烧写好的 SD 卡来进行设备量产或者启动。
3、如果出现360安全卫士阻止是正常现象，请选择：允许程序运行。（委婉地说：全志没有找360认证。^_）￥的问题
4、请选择你编译好的固件：sun7i_android_sugar-ref001.img
请选择烧录模式为：启动卡。
5、烧录完成（正确选择完毕）：
6、烧录完成之后的LOG信息：
Xshell 5 (Build 0964)
Copyright (c) 2002-2016 NetSarang Computer, Inc. All rights reserved.
Type `help' to learn how to use Xshell prompt.
[c:\~]$
Connecting to COM5...
Failed to open COM5.
Type `help' to learn how to use Xshell prompt.
[c:\~]$
Connecting to COM5...
Connected.
??HELLO! BOOT0 is starting!
boot0 version : 3.1.0
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 0
[mmc]: mmc driver ver 2014-04-3 16:20
[mmc]: ***Try SD card 0***
[mmc]: SD/MMC Card: 4bit, capacity: 14992MB
[mmc]: vendor: Man 0x0002544d Snr 0x20f53f3f
[mmc]: product: SA16G
[mmc]: revision: 1.2
[mmc]: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 0x000b0000.
sum=0xee2e7fea
src_sum=0xee2e7fea
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
[ 0.251]
U-Boot 2011.09-rc1 (Sep 12 2017 - 11:22:54) Allwinner Technology
[ 0.259]version: 1.1.0
[ 0.262]pmbus: ready
[ 0.367]PMU: AXP209
[ 0.369]PMU: AXP20x found
[ 0.372]PMU: bat ratio = 100
[ 0.378]PMU: dcdc2 1400
[ 0.389]PMU: pll1 912 Mhz
boot_clock = 912
dcdc2_vol = 1400
dcdc3_vol = 1250
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 0
storage_type = 0
usb_recovery = 1
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.430]DRAM: 1 GiB
relocation Offset is: 35b17000
user_gpio config
user_gpio ok
[ir_boot_para]:the ir is no use
workmode = 0
MMC: 0
[ 0.546][mmc]: mmc driver ver 2014-5-23 10:07:00
[ 0.551][mmc]: get sdc_odly_25M fail,use default dly 0
[ 0.557][mmc]: get sdc_sdly_25M fail,use default dly 5
[ 0.562][mmc]: get sdc_odly_50M fail,use default dly 3
[ 0.567][mmc]: get sdc_sdly_50M fail,use default dly 5
[ 0.572][mmc]: get sdc_f_max fail,use default sdc_f_max 52000000
[ 0.579][mmc]: SUNXI SD/MMC: 0
[ 0.591][mmc]: ************Try SD card 0************
[ 0.626][mmc]: MID 000002 PSN 20f53f3f
[ 0.629][mmc]: PNM SA16G -- 0x53-41-31-36-47-00
[ 0.634][mmc]: PRV 1.2
[ 0.636][mmc]: MDT m-10 y-2013
[ 0.640][mmc]: ---------------mmc->clock 52000000-----------
[ 0.645][mmc]: ---------------mmc->bus_width 4--------------
[ 0.651][mmc]: SD/MMC Card: 4bit, capacity: 14992MB
[ 0.656][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
[ 0.662][mmc]: ************SD/MMC 0 init OK!!!************
[ 0.668]sunxi flash init ok
DRV_DISP_Init: opened
[ 0.773]boot_disp.output_type=2
[ 0.776]boot_disp.output_mode=5
[ 0.779]boot_disp.auto_hpd=1
error: open config.fex, maybe it is not exist
Hdmi_dvi_enable is NULL
Hdmi_get_input_csc is NULL
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:11-
-name- -start- -size-
bootloader : 1000000 2000000
env : 3000000 1000000
boot : 4000000 1000000
system : 5000000 20000000
recovery : 25000000 2000000
databk : 27000000 10000000
misc : 37000000 1000000
private : 38000000 1000000
data : 39000000 40000000
cache : 79000000 14000000
UDISK : 8d000000 0
-----------------------------------
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
recovery key high 6, low 4
cant find fstbt value
to be run cmd=run setargs_mmc boot_normal
the user data'magic is bad
WORK_MODE_BOOT
sunxi_bmp_display
f_read btr over hd12871
read byte = 177288
[ 0.937]fetch script data boot_disp.virtual_logo_width fail or vale=0
CONFIG_ARCH_SUN7IW1P1 : coef_rdy_en!!!
[ 0.947]Hit any key to stop autoboot: 0
read boot or recovery all
[ 1.519]sunxi flash read :offset 4000000, 13483446 bytes OK
[ 1.530]ready to boot
[ 1.532][mmc]: MMC Device 2 not found
[ 1.536][mmc]: mmc not find,so not exit
[ 1.540]
Starting kernel ...
[ 0.769756] aw_pm_init: not support super standby.
[ 0.812264] sw_ahci sw_ahci.0: SATA power enable do not exist!!
[ 1.170628] [hdmi]hdmi module init
[ 1.181269] ##fb init:w=1280,h=720,fbmode=3
[ 1.308664] init: /init.rc: 394: ignored duplicate definition of service 'console'
[ 1.702848] init: start e2fsck listening...
[ 2.287566] EXT4-fs (mmcblk0p12): VFS: Can't find ext4 filesystem
[ 2.340727] init: buffer : /dev/block/mmcblk0p12
[ 10.119586] init: do_umount: /data
[ 10.123634] init: do_umount error = Invalid argument
[ 10.317693] EXT4-fs (mmcblk0p13): VFS: Can't find ext4 filesystem
[ 10.380674] init: buffer : /dev/block/mmcblk0p13
[ 10.708588] init: C_IN_START
[ 10.711993] init: path = /dev/block/data
[ 15.512915] init: do_umount: /cache
[ 15.517050] init: do_umount error = Invalid argument
[ 15.560328] init: start format /dev/block/UDISK
[ 15.565799] init: wait for format /dev/block/UDISK
[ 15.565996] init: fork to format /dev/block/UDISK
[ 15.717092] init: C_IN_START
[ 15.720608] init: path = /dev/block/cache
[ 18.974960] init: format /dev/block/UDISK ok
[ 19.476608] init: start format /dev/block/private
[ 19.482235] init: wait for format /dev/block/private
[ 19.488859] init: fork to format /dev/block/private
[ 20.052409] init: format /dev/block/private ok
[ 20.062359] EXT4-fs (mmcblk0p9): VFS: Can't find ext4 filesystem
[ 20.100691] init: buffer : /dev/block/mmcblk0p9
[ 23.773669] init: do_umount: /databk
[ 23.777842] init: do_umount error = Invalid argument
[ 24.090388] i2c i2c-1: Invalid 7-bit I2C address 0x00
[ 24.729462] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 24.745654] android_usb: already disabled
[ 24.755399] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 24.771883] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
root@android:/ #
root@android:/ #
root@android:/ #
root@android:/ #
root@android:/ #
root@android:/ #
root@android:/ # [ 67.465587] init: untracked pid 2973 exited
[ 192.538699] start_powernow uncare mode:859320624!
[ 195.459781] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
root@android:/ #
root@android:/ #
root@android:/ #
root@android:/ # [ 208.701598] init: untracked pid 3860 exited
3818
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
